We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,124 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Table size: 590 x 520 mm Max. workpiece size: 800 x 600 x 220 mm Max. workpiece weight: 500 kg X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U/V Axis Travel: 1.25" x 1.25" Filter tank capacity: 440 l. Control Mitsubishi Approx. delivery weight: 2000 kg Approx. shipping dimensions in mm: 1550 L x 1800 W x 1930 H
used
Stanzautomat / Punching Machine Plastograph PZ 599 Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlaenge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punch Auslage Ruettler / Delivery Jogger Panel Operation and Controls Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700
used
Key data: 500 mm, 25
This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 25 mm - Injection pressure: 1,800 Bar - Shot volume: 39 cm³ - Working hours: 52,100
used
Key data: 500 mm, 30
This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400
used
Buchdruck Schliesszeuge Regletten / Letter Press closing tools - rules Schliesszeuge in Breiten 9-12-18-25mm und Laengen 5-7,5-10-12-15-18-20-25-30 Keilmutter Keilback Schraube Regletten, Blei Schluessel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
X, Y, Z Travel :600x400x400 mm Machine dimentions WxDxH : 1600x2700x2858 mm Machine weight :440 kg Workpiece dimentions WxDxH :1000x700x400 mm Max. electrode weight :100kg Max. Workpiece weight 1000 kg
used
Inv. Num. : 6908 Type: SCE/L 25 Producer: Nagel Created: 2001 Parameters: Nominal current: 7 kW Control system: Siemens Simatic OP 27 Vibration deflection: 3 mm Stroke of the stone guide: 35 mm Max pressure: 4 bar Length: 2100 mm Height: 2200 mm Width: 1200 mm Machine weight: 2000 kg Equipment: Manual
used
Window tool set complete For wood thickness IV 78 slotted discs and milling heads as well as additional tools Also additive WOOD ALU
Year of construction 2001 Generator multipulse - 70 Ampere + 100 Amp Booster Control Mitsubishi 32 bit - CNC Travel (X, Y, Z) 900 x 1780 x 550 mm Work container (W x D x H) 1300 x 2200 x 730 mm Workpiece clamping table (W x D) 1150 x 2050 mm Accessories 13-speed pick-up linear changer, CO2 fire extinguishing system Status General obsolete
used
complete window tool set IV 68 with additional milling head for left centre rebate and bank connection as well as many spare knives
used
chamfer lenght: 3050 - 4020 mm 4 pieces of unused upper tools: tool No 1 Length: 3700 mm, dimensions see sketch, price = 940,- tool No 2 length: 4020 mm, dimensions see sketch, price = 880,- tool No 3 length: 3055 mm, dimensions see sketch, price = 750,- tool No 4 length: 3050 mm, dimensions see sketch, price = 750,- Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 450 mm, 320 mm, 162 mm
Control FJ.37X Travel X/Y/Z 450/320/162 mm Travel U/V +/- 50 mm Workpiece size X/Y/Z 1100/760/360 mm Table load 500 kg Weight 3200 kg Wire guides ø0.25 and ø0.30 Base strips for EROWA tension beams Wire Alignment Block Wire threading module
used
Key data: 400 mm, 300 mm, 250 mm
Type: Wire EDM Machine Ident Number: 22606 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: SLC 400 G Premium + Year of construction: 2015 Travel: 400 x 300 x 250 mm [ X x Y x Z ] max. workpiece weight: 500 kg U / V axis: 150 x 150 mm Cutting in a water bath Radiator Working tank 850 x 610 mm Taper +/- 25° at tool height 130 mm Control SPW
used
Key data: 500 mm, 350 mm, 250 mm
Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W
used
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22409 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 350 GammaTec Year of construction: 2006 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece weight: 500 kg Electrode changer: 16-fold C-axis
used
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22607 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 35P Year of construction: 2002 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 400 mm max. workpiece size Z: 300 mm max. workpiece weight: 500 kg max. electrode weight: 50 kg Tool changer: 16-speed C-axis Generator: 64 amps lowerable container Erowa ITS50 Clamping Head
used
Key data: 750 mm, 550 mm
Type: Die-sinking EDM machine Ident Number: 22605 Category: Die-sinking EDM machines / EDM Manufacturer: Sodick Model: AG 60 L Year of construction: 2012 Travel: 600 x 420 x 370 mm [ X x Y x Z ] Table size X: 750 mm Table size Y: 550 mm max. workpiece weight: 1500 kg Electrode changer: 6-fold Control: LN2 Quill clamping fixture: EROWA ITS Working container: 950 x 740 x 450 mm
used
Key data: 750 mm, 550 mm
Type: Die-sinking EDM machine Ident Number: 22603 Category: Die-sinking EDM machines / EDM Manufacturer: Sodick Model: AQ 55 L Year of construction: 2007 Travel: 500 x 400 x 350 mm [ X x Y x Z ] Table size X: 750 mm Table size Y: 550 mm Electrode changer: 32-fold Working basin: 950 x 725 x 410 mm Quill clamping fixture: EROWA
Key data: 730 mm, 630 mm, 12 A
Made in Germany X-axis 525 mm Y-axis 400 mm Z-axis 375 mm Dielectric tank 400 L Machine dimension; W 2100 x D 2450 x H 2600 mm Weight: 4800 KG Work table: L 730 x W 630 mm Operating voltage 400 V - 50 Hz Current consumption 12 A Control voltage 230 AC/ 24 DC Back-up fuse: 25 A Moto software is missing Price basis: free loading
used
Key data: 500 mm, 400 mm
Due to death sale. No function therefore sold as defective. Made in Switzerland X-axis 350 mm Y-axis 250 mm Z-axis 300 mm Working tank length 800 mm Working tank width 550 mm Height of the working tank 370 mm CNC type CHARMILLES Table length 500 mm Table width 400 mm Max. workpiece length 940 mm Max. workpiece width 550 mm Max. workpiece height 370 mm Max. workpiece weight 500 kg Machine Dimension: Length x Width x Height 2100.0 × 1800.0 × 2400.0 Weight 2500 kg
used
Key data: 320 mm, 250 mm, 160 mm
Inv. Num. : 7379 Type: H-CUT 203M20 Producer: HITACHI Created: 1995 Parameters: Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm
used
Key data: 370 mm, 270 mm, 255 mm
Inv. Num. : 7378 Type: ROBOCUT Alpha-0iE Producer: FANUC Created: 2013, GO 2020 Parameters: Control system: FANUC Max. travel length of the X-axis: 370 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 255 mm Feed length in the U-axis ( -): 60 mm Feed length in the V-axis ( -): 60 mm Minimum wire gauge: 0.1 mm Maximum wire thickness: 0.3 mm Max. workpiece dimensions: 700 x 600 x 250 mm Max. workpiece weight: 500 kg Machine height: 1950 mm Machine length: 2200 mm Machine width: 1930 mm Machine weight: 1200 kg Equipment: Measuring instruments Software
used
- Various workshop tools and power tools of various brands (Bosch, Parkside, etc.) with batteries and chargers, Beta tool trolley - 1 compressor 100 Lt - 1 Telwin brand welding machine.
used
Key data: 838 mm, 305 mm, 60 A
Inv. Num. : 7380 Type: E-36P Producer: KING SPARK Created: 1998 Parameters: Maximum operating current: 60 A Table dimensions: 838 x 305 mm Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 200 mm
used
Key data: 500 mm, 350 mm
Table: mm 500 x 350 Travels: X-, Y-, Z-: mm 300 x 200 x 200 Positioning of an origin point: via the scale drum Container dielectric dimensions: mm 820 x 500 x 300 Maximum distance between table and head: mm 540 Maximum weight of electrodes: kg 60 Machine dimensions: mm 1,200 x 1,300 x 2,200 h Machine weight: kg 1.100 Due to the death of the previous owner, we cannot provide any information on the function of the machine.
used
Inv. Num. : 5124 Type: 254Z Producer: Hitachi Created: 2003 Parameters: Control system: FANUC Table length: 400 mm Table width: 250 mm Maximum workpiece length X: 400 mm Maximum workpiece width Y: 250 mm Maximum workpiece height Y: 210 mm Equipment: Manual control List
used
Inv. Num. : 6099 Type: 203 Y Producer: Hitachi Created: 2002 Parameters: Hours: 39801 h Max. travel length of the X-axis: 330 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm Machine weight: 300 kg
used
Key data: 3100 mm, 2700 mm, 2300 mm
Hydraulic press brake - conventional including paternoster system for uncomplicated tool change with 25 hangers. for export NC Press Brake Heut Lotze Type: PZ 100 - 25 Built in 1973 Pressure 100 t Bending length 2500 mm Stand width 2100 mm Weight approx.: 11.000 kg, Dimensions (LxWxH) approx.: 3,100 x 2,300 x 2,700 mm -------------------------- Paternostar system Schwab Maschinenbau Type: SIB 430/340 Built in 1982 Number of compartments 25 max. shelf load 150 Dpa max. device payload 3750 Press brake and paternoster can be purchased separately Maschinenhandel Nord new & used machines for industry, trade and commerce Import/Export Service & Advice Also take a look at our Other Ads. Many more drills available Or visit our more than 1000m² exhibition hall with new and used industrial and manufacturing machines, not far from the A20 motorway!
used
Key data: 80 mm
Inv. Num. : 6470 Type: CTO 80 Producer: PIESOK Created: 1990 Parameters: Compressive force: 80 t Machine weight: 6100 kg
used
Key data: 63 mm
Inv. Num. : 7286 Type: PT 63 Producer: IPTE Created: 1990 Parameters: Compressive force: 63 t
used
Description: Consisting of various indexable unscrewing heads Approx. Onsite Dimension. (l x w x h): 400 x 300 x 100 mm, weight approx.: 40 kg
used
4 pcs. PILZ safety system 773732 PNOZ mc3p Profibus 2
used
chamfer lenght: 3055 mm Various tooling: 2: 118 x 65 x 3055 mm, dimensions see sketch, price = 550, - Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Additional information: Various turning and milling accessories from D'Andrea consisting of a case with contents + various accessories. Suitcase: - boring bar (B3.06 / B3.08 / B03.11 / B3.16 / B3.22 / P25.63), - Plate holder / tool clamping screws various accessories: - Tool holder TR 200 - Accessories for tool holders (PS33.32 TRE 80 / PS33.28 TRE 80) - Plate holder (SFCC 50 / SSCC 63 / SSCC 80 / SSCC 90) - Counterweight CW 200 - TS roughing heads (TS 25/25 / TS 32/32) + insert holder - Tool clamping screws D'ANDREA S.p.A. is an Italian company that is a world leader in the Manufacture of high-precision accessories for machine tools. It was 1951 founded by MarinoD’Andrea, who began his activity with the introduction of the first facing and drilling head (TA). The D'Andrea brand is international recognized brand, which is represented by a distribution network present in ov ...
used
Description: Additional information: Drill rails: - BPS 200 (Ø 200 - 300) = 1 piece, - BPS 300 (Ø 300 - 400) = 1 piece, - BPS 400 (Ø 400 - 500) = 1 piece, The BPS drill rails cover a working range from Ø 200 to Ø 1200 mm for both roughing and fine machining. The extensive range of accessories includes both insert holders for rough machining and micrometric fine machining heads, which are used for Boring, chamfering and reverse machining are suitable. The main body of the BPS drill rail is made of aluminum, on which the steel plate holder plates are attached. weight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 400 x 250 x 100 mm
used
Description: Various gear shaping tools (approx. 103 STK) Make: Lorenz/Liebherr/PWS/Deltal etc. Various gear shaping tools (approx. 103 STK) in different sizes and modules to: - Disc cutting wheels with and without step grinding - Bell cutting wheels with and without step grind - Shank cutting wheels Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 350 mm, weight approx.: 110 kg
used
Description: 7 pieces different manufacturers Approx. Onsite Dimension. (l x w x h): 600 x 600 x 200 mm, weight approx.: 30 kg
used
Description: With indexable inserts, drills, milling cutters Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 250 mm, weight approx.: 50 kg
used
For sale is: 1 Piece Used Hydraulic Press Brake Manufacturer: Weinbrenner Type: GP100 Year: 2000 Pressing force: 1,000kN Working length: 2,050mm Clear stand width: 1.550mm Stroke: 600mm Control: Cybelec Hours: 35,000 Incl. rich tools, see contents 2 pieces of white cabinets. Several folders of documentation available for the machine, Elt plans, control Cybelec,... Very neat condition. The machine can be viewed in our warehouse in 09599 Freiberg.
used
For sale is: 1 Piece Used Hydraulic Press Brake Manufacturer: Weinbrenner Type: GP160 Year: 1993 Press force: 1,600kN Working length: 4,050mm Clear stand width: 3,550mm Stroke: 500mm Control: Cybelec Hours: 52,300 Incl. rich tools, see contents blue shelf (shelf itself is not sold). Several folders of documentation available for the machine, Elt plans, control Cybelec,... Very neat condition. The machine can be viewed in our warehouse in 09599 Freiberg.
used
Description: Composed of: Jigsaw jigsaw PRACTYL , A DEXTER battery charger A DEXTER cordless screwdriver , A DEXTER wrench , Approx. Onsite Dimension. (l x w x h): 500 x 400 x 500 mm, weight approx.: 15 kg
used
Description: Composed of No. 5 tools from different manufacturing sectors. Demonstration case for NIKKEN KOSAKUSHO tools. Approx. Onsite Dimension. (l x w x h): 300 x 350 x 150 mm, weight approx.: 5 kg
used
Description: Composed of: various tweezers, wire cutters, conduit puller, screwdriver set, solder tin puller. Approx. Onsite Dimension. (l x w x h): 330 x 240 x 90 mm, weight approx.: 5 kg
used
Inv. Num. : 7489 Type: HFE 170-3 Producer: AMADA Created: 2000 Parameters: Compressive force: 170 t Maximum ram stroke: 200 mm
used
Inv. Num. : 7490 Type: Roundscan 555 Producer: Hommel Generated: Parameters: Maximum workpiece weight: 60 kg Maximum measurable diameter: 430 mm Maximum measurable height: 550 mm Table diameter: 330 mm
used
Inv. Num. : 7501 Type: PNR 92 Producer: EGO a.s Created: 1995 Parameters: Number of shelves: 34 pieces Power consumption: 5 kW
used
Description: Including indexable inserts, reamers, drills, taps, dies Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 60 kg
used
Description: Consisting of a router (type: OF1000EB) and an orbital sander (type: RS200EQ) Approx. Onsite Dimension. (l x w x h): 600 x 300 x 150 mm, weight approx.: 15 kg
used
Description: Consisting of 2 pieces Including an electric planer from the manufacturer MAKITA Type: 1900-B As well as a hand belt sander from the manufacturer AEG Approx. Onsite Dimension. (l x w x h): 400 x 300 x 150 mm, weight approx.: 20 kg