lathe machine used used for sale

Pinacho S90-310 lathe. Distance between centers: 1.625mm. Swing: 620mm. Swing over carriage: 425mm. Swing in gap: 880mm. Bore: 80mm. 12 speeds: 30-1500rpm. Motor power: 7,5cv. Equipped with chuck. Equipped with DRO Heidenhain. CE.

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Key data: 1250 mm, 1400 mm, 1150 mm

Digital Workpiece weight 8 t Crossbar adjustment 800 mm Chisel travel 700 mm Swivel angle max. 45 +/- degrees Special equipment: wet turning device, Fine-tuning chisel device, incl. accessories Machine weight approx. 13.5 t Space requirement approx. 3.4 x 5.8 x 4.5 m

Lead and Pull Screw Lathe VOEST DA300 Year of construction ca 1980 Turning diameter over bed 600mm Effective turning length: 1850 mm Spindle Passage: 85mm Speeds: 14 - 1000 rpm Tailstock: MK5 Reversal backlash face spindle: 0.5 mm Reversal clearance upper slide: 0.25 mm Rapid traverse bed sledge: in both directions EQUIPMENT - Multifix C - 5 steel brackets - Rotating center tip MK4 - 4 jaw chucks Ø 400mm, plus 3 sets of jaws - 3 jaw chucks Ø 400mm - 3 sets of jaws - Both linings Röhm - Fixed bezel The machine is in good condition. The machine bed is in very good condition.

Key data: 280 mm

Year of construction 2015 Center height: 165 mm Center width: 650 mm Turning diameter over bed: 280 mm Face slide: 180 mm Spindle speed: 30 - 4000 rpm (infinitely variable) Spindle bore: 43 mm Feeds: 0.025 - 0.9 mm/rev Thread pitch: 0.2 - 7 mm Spindle head DIN 55027: Size 5 Bed sledge travel: 610 mm Sledge travel: 165 mm Upper slide travel: 115 mm Inner cone tailstock quill DIN 228: MK3 Quill stroke: 82 mm Dimensions: 1600 x 860 x 1450 mm Weight: 1000 kg Total power requirement: 18kVA Accessories: 3-jaw chuck, Multifix quick-change steel bracket with cassettes, bezel, coolant device, lighting, chip protection

Combined copying milling machine - lathe MICHAeL KAeMPF -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Year of construction 2008 Control system Siemens 840 D Rotational diameter. [mm] 2400 Turning length [mm] 2145 General: Year of construction 2008 Control system Siemens 840 D Turning diameter 2,400 mm Rotation height 2,145 mm (stand elevation 900 mm) Machine Table: Technology gear table, 2 stages Drive power 100 kW Torque 39,700 Nm Holding torque milling operation 44,800 Nm Speed 250 rpm Face plate diameter 2,200 mm Table load max. 17,000 kg C-axis 0.001° Drilling and milling equipment: Technology Gear Spindle Speed max. 3,000 rpm Power 37 kW Torque 1,230 Nm Tool holder Capto C8 Crossbar: Vertical travel 1,000 mm Grid spacing 100 mm Distance between milling spindle and table 2,350 mm Support: Travel X-axis +/- 1,350 mm Z-axis travel 1,500 mm Chisel slide cross-section 250 x 250 mm Immersion diameter 340 mm Rotate tool holder Capto C6 Tool Hold ...

CNC Vertical Lathe BERTHIEZ TFM 125 Numerical Command: NUM 1040 Maxi turning diameter: Ø 1550 mm Turning height: 1000 mm Vertical run of the slide: 800 mm Max turning height under crossbar: 1280 mm 2 speed ranges: 1 to 125 RPM - 1.6 to 200 RPM 4-jaws chuck Ø 1250 mm False platform diameter: Ø 1500 mm Maxi permissible weight on chuck: 10 T Motor: 22 kW Horizontal travel at right of chuck: 895 mm Horizontal travel at left of chuck: 935 mm Left coolant section: 180 x 180 mm Tool changer: non-functional Chip Conveyor Voltage: 380 V Weight: approx 20 T

Year of construction: 2015 Condition: very good (used) X-axis travel: 925 mm Y-axis travel: 1,050 mm Z-axis travel: 600 mm Spindle speed (max.): 8,000 revolutions per minute Spindle speed (min.): 25 revolutions per minute Motor power: 2,200 W Total height: 3,525 cm Total length: 4,850 cm Total width: 2,998 cm Workpiece weight (max.): 700 kg Table load: 700 kg Input Current Type: AC Table width: 630 mm Tool length: 400 mm Total weight: 175,000 kg Coolant supply: 70 bar Equipment: Documentation/manual, infinitely variable speed Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. We operate Okuma CNC service throughout Europe bo ...

Key data: 560 mm, 1200 mm, 380 mm

Lathe Core Three-jaw chuck Multifix B 2 Holder Spindle bore 52 mm Speeds 38 - 1900 rpm Steels Chuck Sharpen 380 V 25 A Length 2.80 m Width 1.00 m Height 1.60 m

Tornos Multiswiss 8x26, Year of construction 2018, Control Tornos, 1 x counter spindle, 4 x reverse machining, Parts tape, 2 x 80 bar high-pressure pumps, fire extinguishing system, Bkhjrdnfq8o hinged belt conveyors, Bar feeders, paper tape filters,

Key data: 1000 mm, 2000 mm, 800 mm

Heavy Lathe, Lathe, Lathe, Lead and Pull Screw Lathe, Lead and Pull Spindle Lathe -Manufacturer: Arad M.I.C.M., Type SN800x2000 -Turning length: 2000 mm -Swivel Ø over bed: 800 mm -Swivel Ø without bed: 1000 mm -Swivel Ø over support: 400 mm -Spindle bore: Ø 83 mm -Spindle speeds: 8 - 1250 rpm -Three-jaw chuck: Ø 400 mm -Quick change: Multifix steel bracket -Tailstock mount: MK5 -Drive motor: 18.5 kW -Dimensions: 4000/1450/H1430 mm -Weight: 4500 kg The machine can be viewed at any time. Free loading. Transport possible throughout Europe

Lead & Pull Screw Lathe TOS SV 18 RA Year of construction approx. 1980 The machine is in good used condition and works perfectly. Transport or delivery can be arranged. Of course, loading technology is available at the time of collection. Specifications: Center height 180 mm Circumferential diameter over bed 380 mm Circulation diameter over support 215 mm Center width 1000 mm Spindle bore 41 mm Speed range 14 - 2800 rpm. Longitudinal feeds 0.02 - 5.6 mm/rev Feeds flat 0.01 - 2.8 mm/rev metric pitches 0.2 - 140 Inch thread 1/5 - 140/1" DP thread 1 - 224 DF Module thread 0.2 - 70 m Drive power 6.0 kW Dimensions approx. 2200 x 1000 x 1400 mm Weight approx. 1800 kg with -Arbor - Three-jaw lathe chuck - Moving grain tip The machine can be viewed at any time.

Control Mazatrol Fusion 640 TN Turning diameter 180 mm Turning length 100 mm Travel X/Z 320 +560 / 280 mm Speed 7000 min-1 12-speed turret Conveyor Accessories:

- Digital display Heidenhain - Accessories available Center height 200 mm Center width 1000 mm Turning diameter over carriage/bed 240/425 mm Length of crank from the plank with 4 jaws 180 mm Spindle bore 51 mm Inner cone 60 metric Recording Camlock D6" Speed 45-2240 rpm Lead screw pitch 6 mm Tailstock quill holder MK 4 Diameter of tailstock quill 70 mm Quilles: stroke 200 mm Feeds: Longitudinal 0.05-2.8 mm/rev Flat 0.05-2.8 mm/rev Rapid traverses: Longitudinal Thread pitches: Metric 0.5-14 mm English 2-56 U/1" Module 0.125-3.5 Motor 380 volts, power 12.5 hp Machine dimensions: W x D x H 2400 x 1200 x 1800 mm Weight 2100 kg

Center height 225 mm Center width 1000 mm Spindle bore 42 mm

Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg The machine is still energized. Viewing possible at any time by arrangement.

Gebr. CNC Long Short Turning/Milling Center with B-Axis Hours: 7200 Control: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear beams: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2.110x1.200x1.885 Weight: 3,300 kg Conversion from long to short turning Deep Hole Drilling Stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross Drilling Rear Conveyor Fire extinguishing system FMB bar feeder Minimag 20, YOC 2012 The machine can be viewed under power by arrangement. Subject to changes and errors in the technical data and  ...

Inv. Num. : 7432 Type: SW 32 Producer: Goodway Created: 2017 Parameters: Side length: 315 mm Max. turning diameter: 32 mm Weight: 3200 kg

Key data: 178 mm, 485 mm, 100 mm

Turning length: 485 mm Rotation diameter: 178 mm above bed / 100 mm over cross slide Spindle Passage: 15.5 mm Spindle speeds: 25 - 2,150 rpm. Tool Container: Tripan Container Equipped with: - Rohm 3-jaw chuck with different jaws - Zahrade Set - Collet set -Operating instructions Country of origin: UK Machine LxWxH: 1180 x 700 x 1200 mm Machine weight: 170 kg

Key data: 380 mm, 1200 mm

Turning length: 1200 mm Rotation diameter: 380 mm above bed Spindle Passage: 50 mm Spindle speeds: 35 - 1,500 rpm. Equipped with: - 3-jaw chuck with different jaws - Steel tank Country of origin: UK Machine LxWxH: 2500 x 950 x 1200 mm Machine weight: 1200 kg

Key data: 500 mm, 3000 mm, 300 mm

Turning length: 3000 mm Rotation diameter: 500 mm above bed / 300 mm over cross slide Spindle Passage: 72 mm Spindle speeds: 11 - 1134 rpm. Tool container: Multifix Type C Equipped with: - Fixed bezel - Digital reading Acurite - Rapid traverse - Ball rotating apparatus - Miscellaneous accessories -Operating instructions Country of origin: Germany Motor power: 8 kW Machine LxWxH: 450 x 140 x 150 cm Machine weight: 4000 kg

Control: OSP-P200L Max. turning diameter 1000 mm Table diameter Ø 800 mm Displacement Horizontal 900 mm Tool turret 12 places Equipment: -Conveyor - Lots of tools -Water tank -Pedestal

GENERAL Project No.: 905623 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Siemens 840 D solutionline Year of construction: 2018 Condition: Used machine Program run approx. (hrs.): 28,500 DESCRIPTION TURN Max. turning diameter 210 mm Max. turning length 100 mm Max. circulation diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at ED 10-40/100% 25/16 kW Max. torque main spindle at ED 10-40/100% 200 Nm Spindle diameter in the front bearing main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z Main spindle unit 400/-/200 mm Max. rapid traverse speed in X/Y/Z Main spindle unit 60/-/30 m/min Feed force in X/Y/Z Main spindle unit 5000/-/5000 N Direct Displacement Measuring System Main Spindle Unit X/Z Full-clamping cylinder on the main spindle Rev ...

Key data: 355 mm, 1600 mm, 355 mm

Manufacturer | Manufacturer: WMW Type | Type: DLZ 355 x 1600 Stock number | Stock Number: 1009 Turning Length | Turning length: 1600 mm Circumferential diameter over bed | Swing diameter over bed: 355 mm Spindle bore | Spindle bore: 35 mm Tip Height | Center height: 180 mm RPM | turning speed: 112 - 2500 rpm Engine Power | Drive power: 5.5 kW Weight Machine | Weight of machine: 2,2 t

Key data: 400 mm, 1500 mm, 400 mm

Manufacturer | Manufacturer: Wafum Type | Type: TUD 40 x 1500 Stock number | Stock Number: 1011 Turning Length | Turning length: 1500 mm Circumferential diameter over bed | Swing diameter over bed: 400 mm Spindle bore | Spindle bore: 56 mm 21 working spindle speeds | 21 speeds: 18..1800 rpm Connected load | connected power: 7.35 kW Weight of the machine | Weight of machine: approx. 2.8 t

Type tandem with 2 workrooms Control: SIEMENS Sinumerik max. turning Ø: 200 mm Travels: X= 520, Z= 200 mm Revolver with 14 stations Conveyor

Chuck, Multifix, 15KW, Mas. No. 07351501

Tool quick coupler used and new, different sizes Partly Multifix, C , B , A, E, ... Can also offer them new ones. Assembly on request or self-assembly !

Key data: 330 mm, 750 mm, 160 mm

Machine is in top condition and incl. accessories ( 20 Multifix holders, 70 collets, glory chuck) , 1 - 4500 rpm, 1300 Kg, under power

Lathe beds, unused Compakt 5 , Compakt 8, Compakt 11, Super 11 Miscellaneous: clamping tables, angle tables, steady rests, lathe spindles, milling spindles, ...

Support , traversing carriage of a Schaublin lathe, sgt. Condition See photos ! Rotatable, feed via lever, feeder, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible !

Year of construction: 2008 CNC controller: MSX850-III Capacity X-axis travel mm: 280 Y-axis travel mm: ±60 Z-axis travel mm: 820 Turning length mm: 713 Max. turning diameter mm: ø 420 Swing over bed mm: ø 995 Swing over cross-slide mm: 825 Bar work capacity mm: 90 Upper turret Number of tool slots St .: 10 Speed ​​driven tools RPM: 6000 Indexing time s: 0.3 Main spindle Speed ​​spindle rpm: 3000 Spindle bore mm: 105 Chuck type: 12" Spindle nose: JIS A2-8 Tailstock Tailstock travel mm: 734 Holder: MT-5 Coolant system Tank capacity liter: 300 Equipment Electronic Handwheel Chip conveyor Swivel head Infrared probe Rotating inspection windows Operating mode 4 blowing air through spindle center selectable via M-function 3D quickSET Working time hours Under power: 62041 Spindle 1: 28159 Rated power kVA: 48  ...

CNC controller: MSX-850 (MAPPS III) Capacity Turning length mm: 1.260 Max. turning diameter mm: ø 420 Swing over bed mm: ø 995 Swing over cross-slide mm: ø825 Bar work capacity mm: 90 Upper turret X-axis travel mm: 280 (210+70) Z-axis travel mm: 1.370 Number of tool slots St .: 10 Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 Indexing time s: 0,3 Main spindle Speed ​​spindle rpm: 3.000 Drive power spindle kW: 22/18,5 Spindle bore mm: 105 Chuck type: B 212 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstock travel mm: 1.284 Holder: MK4 Coolant system High-pressure bar: 5 Equipment Chip conveyor High pressure pump Workarea light Interface for Bar feeder Working time hours Spindle 1: 4799 Rated power kVA: 38,7 Basic machine dimensions / weight Length mm: 4.600 Width mm ...

Year of construction: 2011 CNC controller: F31iA5 (MAPPS 4) Capacity X-axis travel mm: 210 Y-axis travel mm: 110 Z-axis travel mm: 810 B-axis travel mm: 360º(0,001) Turning length mm: 310 Max. turning diameter mm: ø 810 Upper turret Tool holder: 16 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Lower turret Tool holder: 16 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Main spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: JIS A2-6 Counter spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: JIS A2-6 Equipment Chip conveyor Rinsing gun Bar loader Working time hours Under power: 49226 Rated power kVA: 88 Basic machine dimensions / weight Length mm: 3930 Width mm: 2740 Height mm:  ...

- Controller FANUC Series 18i-TB - max. rod Ø: 13 mm - Max. speed - main spindle: 12 000 min-1 - Max. speed - pick-up spindle: 12 000 min-1 - Headstock stroke: 130 mm - 3x rotating tools - Turning tools 4 + 4 - Bar feeder FMB minimag 18/3200 A

Inv. Num. : 7563 Type: S90/200 Produzent: PINACHO Erzeugt: 2002 Parametern: Maximale Drehlänge: 400 mm Maximaler Drehdurchmesser über Bett: 400 mm Abstand zwischen Spitzen: 1150 mm Länge: 2880 mm Breite: 995 mm Höhe: 1620 mm Gewicht: 1100 kg

Technical data approx.: - Largest turning diameter - over bed 560 mm - via flat slide 315 mm - Center width 1500 mm - Traverse transverse slide approx. 300 mm - Spindle bore 80 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 150 mm - Spindle speeds 1 - 2500 rpm - Rapid traverses X / Y -with: - NC – FANUC control - 2 E. handwheels for manual turning -Tailstock - Coolant device - Drive 400 V / 7.5 kW - Space requirement approx. W 3250 x H 1750 x D 1500 mm - Weight approx. 3800 kg

turning diameter: 550 mm, serial number: MA-2274, x-motion: 150 mm, z-motion: 400 mm, control: FANUC Series O- T, number of controlled axes: 2, total power requirement: 18 kW, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,300 x 1,800 x 1,900 mm

Emco Emcomat 17S Built in 1999 Center height 140/280 mm Weight 725 kg Dimensions 1650x 1060 x 1290 Speed 15- 3550 rpm

Control Fanuc 18i-TB Rotary diameter. [mm] 220 Turning length [mm] 110 Spindle: Motor spindle technology Speed 4,500 rpm Power (max.) 27 kW Torque (max.) 303 Nm Workpiece Clamping 3-Jaw Chuck, SMW Autoblock KNCS-N 170-43 Tool carrier: Technology Turret with 12 stations Tool holder VDI40 Tool drive 6,000 rpm General: Travel in X/Z 570/200 mm Rapid traverse in X/Z 60/30 m/min Chuck -ø (max.) 260 mm Circumferential ø (max.) 260 mm Machining ø (max.) 220 mm Workpiece height (max.) 110 mm Equipment/accessories: Displacement measuring system directly in X/Z (glass scale) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure Automation of circulating workpiece storage, O-type Oil Mist Extraction Mechanical Separator, W+W ME-FI 600 Fire extinguishing system Kraft + Bauer Other accessories Various driven and rigid  ...

Technical data: 2000 overtaken Turning diameter over bed: 1350 mm Turning diameter via slide: 1250 mm Sheet: 1350 mm Clamping on the flat disc: 300-900 mm Turning length: 5000/6000 mm

Technical data: Turning diameter over bed: 1260 mm Turning diameter at opening: 2700 mm Turning diameter at the pit: 3800 mm Turning diameter via slide: 900 mm Turning length: 4000/5000 mm

Technical data: Diameter over bed: 625 mm Turning length: 1500 mm Diameter via slide: 325 mm Spindle head shape: Cam-Lock Spindle drilling diameter: 105 mm

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Technical data: The machine is completely overhauled in 2011 with new electrics, new wiring, including new control SIEMENS Sinumerik 840D max. circulating and turning diameter: 2,000 mm max. turning height: 1,500 mm Sheet disc diameter: 1,600 mm max. table load: 11.20 to. Cross-beam adjustment: 1,170 mm

Manufacturer: GORBREX Model: TKV 532 CNC New in: 2015 Control: SIEMENS SINUMERIK 828 Machine fully modernized and modified of SEDIN 1L532 with new electrical and lubrication unit, painted, replacement of damaged mechanical parts, with possibility of upgrading. The upgrade is made of cast iron, on request we can equip the machine with the new CNC control SIEMENS SINUMERIK 840. Delivery time: max. to 3 - 4 months Technical details Number of columns: 2 Number of carriages: 1-option 2 Type of carriage: Ram Number of axis controlled: X/Z option X1/Z1,C Max. turning diameter: 3200 mm Table diameter: 2800 mm Max workpiece height: 1600 mm with possibility of upgrading up to 2200 mm Max table load: 16 000 kg Range of table speeds: 70 rpm Number of table speeds ranges: 3 Vertical travel in Z axis( ram travel): 1200 mm Horizontal travel of carriage in X axis: 1720 mm Working ...

Manufacturer: GORBREX Model: TKV 516 New in: 2015 CNC control: CNC SIEMENS SINUMERIK 828 Location: our workshop, Rudniki - Poland Machine fully modernized and modified of SEDIN 1516. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828. Delivery time: 3-4 months Tool Changer and Warranty Technical details Numbr of columns: 1 Number of carriages: 1 Type of carriage: Rotary head in 5 position or Ram Axis controlled: X/Z Turning diameter: 1 600 mm Faceplate diameter: 1 400 mm Max workpiece height: 1 000 mm( with possibility of extension to 1400 mm) Max table load: 5 000 kg Range of table speeds: 5-200 rpm Number of speeds range stepless: 3 Vertical travel of Z axis: Rotary head: 700 mm Ram: 1000 mm Horizontal carriage travel in X a ...

CNC Vertical lathe GORBREX Model: TKV 512 Year of manufacture: 2016 CNC CONTROL: SIEMENS SINUMERIK 828 Brand new machine, modified of SEDIN 1512 Excellent condition! Machine fully modernized and modified of SEDIN 1512. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828 Machine will be built on order Delivery Time: app. 2 months Technical details: Turning diameter: 1250 mm Faceplate diameter: 1120 mm Max workpiece height: 1000 mm Max.workpiece weight: - 3200 mm (5...80 rpm) - 1000 mm (250 rpm) Max swivel angle(upper carriage): 45 Max vertical feed(side carriage): 5 Number of ranges of table speeds: 18 Table speed: - min.: 5 rpm - max. 250 rpm Number of ranges of carriage feeds: 16 Carriage feed: - min.: 0.07 rpm -ma ...

Manufacturer: GORBREX-POLAND Model: TKV 540 New in: 2015 Condition: New machine Location: Rudniki, Poland Control: CNC SIEMENS 828 Technical details Number of columns: 2 Number of carriage: 1 Type of carriage: RAM Number of axis controlled: X/Z Turning diameter: 4000mm Table diameter: 2800mm Max. workpiece height: 1600mm( with possibility of upgrading to 2200mm) Max. table load: 16 000kg Table speeds range: 70rpm Number of table speeds range: 3 Vertical travel in Z axis 1200mm Horizontal carriage travel in X axis: 2120mm Work feeds range: 2-2000mm/min Rapid feeds in X/Z axis: 10m/ min Knife intersection: 63 x 40mm Traversal beam vertical travel: 1240mm Traversal beam feed: 360mm/min Main motor power: 55kW Installed power: 69kW Positioning accuracy: 0,01-1000mm Machine dimension: 5500 x 6750 x 4900mm Net weight: 49000kg