label machine bottle used for sale

Bottle cleaning machine Einend Manufacturer: O+H, KHS Type: Contina D 777 / 420 / 500 - 95, Built: 1989, Power: 65,000 Fl/h, Bottle size: 56- 89 mm, length 240 -285 mm. Overhauled, with warranty

Bottle cleaning machine One end Manufacturer: SEN, KHS Type: Riwella VB 12/11-2, Built: 1987, Power: 5700 Fl/h, Bottle size: 55- 92 mm, length 170- 360 mm. Overhauled, with warranty

Bottle cleaning machine Double-end Manufacturer: Krones, Type: Flamatic KDF 246-500-42-110 , Built: 1991, Power: 44,000 Fl/h, Bottle size: 56- 95 mm, length 240 -340 mm. Overhauled, with warranty

Glass bottle washer, MAG Schymanski Enomeco, year: 2000, complete stainless steel, Siemens S7, for 330 ml + 500 ml and 500 ml bottle with swing stopper clip lock, capacity up to 7,000 bph.

Capacity: 50.000 bt. / h Currently equipped for 0.25l Vichy / 0.25l Gastro / 0.50l GdB / 0.70l GdB / 0.75l GdB / 0.75l Benelux / 0.75l Gastro Bottles. • Inspection of the mouth sealing surface • Inspection of the side wall (both sides) • Inspection of the thread • Detection of conductive residual liquids • Detection of residual liquids by IR • Diversion of faulty bottles • Diversion of bottles exceeding height and/or width as well as lying bottles Incl. module for detection of impact spots Incl. blower for removal of water drops

capacity: up to 11,000 bottles/h suitable for 0.2 to 1.0 ltr. bottles year of manufacturing: 1990 partly dismantled for reconditioning

Used Heuft Empty Bottle Inspector InLine IXs reflexx Device No. 2ZG044698 Condition: very good, ready for use at short notice ·       Commissioning 6 May 2012 ·       Upgrade for later integration of additional ground control using X-ray technology ·       Tape control Heuft Synchronous TX ·       Network Heuft Hlan ·       Haylofts two ways discharge with div. Heuft container transport Convejor ·       Troubleshooting Software Wizard ·       Software assistant guided instructions for the different container changes ·       Power max. 46,000 fl./h ·       5 Variety licenses incl. scope of delivery: ·       Belt control Spectrum TX ·       Measuring bridges for inlet control and discharges incl. height connections ·       2 x Discharge Delta K  ...

Used Heuft Glass Empty Bottle Inspector InLine reflexx Device No. 2ZG042943 Condition: very good, ready for use at short notice ·       Original delivery date 12.2011 ·       Power max. 46,000 fl./h ·       Pass direction from left to right ·       Two triggers ·       Secomak blower instead of compressed air ·       Transponder detection for RFID test bottles ·       Discharge monitoring ·       Network Heuft Hlan (Upgrade Optional) ·       Hayt two ways discharge Delta K to the right ·       4 Variety Licenses ·       Tripartite Delta K for band height of 1130 ·       Two fluids for lye detection Not available! ·       inlet control, must be supplemented if necessary ·       Thread edging, must be supplemented if required ·       The documentation is complet ...

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...

Year of construction: 1980 Running direction: Left – right Pitch: 95 mm Siemens S7 controller, Danfoss frequency converter With a stainless steel control cabinet. Equipped with 3 sets of parts for the following bottles: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP capable. With electric height adjustment. Modernization and service by arrangement. The machine is in good condition and still in operation. A visit is possible by arrangement Year of construction: 1980 Working direction: Left – right Pitch: 95 mm Siemens S7 control and a Danfoss frequency converter. Installed in a stainless steel switch cabinet. Equipped with 3 bottle guiding parts for: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP able. Height adjustment of the filler bowl and closing machine by electrical gear motor. Reconditioning /  ...

This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.

year of manufacturing: 1996 with 10 bottles/row capacity: 1.600 - 3.600 bph gas directly heated (on request the gas burner can be changed for an oil burner against charge) incl. automatic label discharge stainless steel water baths completely reconditioned incl. new main chain and new bottle cells

with 12 bottles/row cell pitch: 110 mm capacity: approx. 2,000 - 2,500 fl./h Oil-direct heated including oil burner

Krones EBI empty bottle Inspector along with contour detection module and ejector tables Krones bottle inspector along with contour detection module: • Type: Krones Linatronic • Production year: 2012 • Capacity: 60 000 bottle/hours • Work direction: form left to right Possible detections: • Rest of the liquid (infrared) • Double control of residual soda (high frequency) • Neck damage control • Sidewall control modules • Damaged bottles discard • Separate rejection of dirty bottles • Detection of the contour of the bottle • Detection of the color of bottle • Separate rejection of a bottle with wrong contour or color The system includes: • KRONES Linatronic Inspector • Contour detection module • Ejection table behind the Inspctor • Ejection table behind the contour detection module

An inspection system for bottle label control is offered, Throughput 30,000 Fl/h With 3 Kamaras and control

Bottle washing machine, Fabr. Klinger, for 4,000 fl/h, 10 fl/row, with 110 mm bottle cells, run on VDF bottles 0.25 lt, 0.75 lt and 1.0 lt, Steam connection 3 bar L: 7,700 mm, W: 2,700 mm, H: 2,700 mm Price on request

Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!

Inspector, Fabr. Nail, Type: NAG, Type: Full inspection 5/8, up to 5,000 fl/h, furnished on 0.33 lt BV-Maurer + 1.0 lt bracket, KK 0.33 lt Gourmet, KK 0.5 lt NRW + EURO, running direction re->li for floor, muzzle, sidewall and lye control with new card for side control serviced annually

Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request

Bottle washer Machine No: 450.0017.5 Year: 1994 Capacity:13500 bottles/h

Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.

Bottle washer, make Krones / Zierk, type: KES-2-2-245/22-95, for 24.000 bph, with 22 bottle row, with "Schleicher"-control, built 1992, 10500mm x 3750mm x 3100mm, Weight: 42 to.

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991

Immerse sterilizer / bottle washer, make SEN, type: Tauch-Stella 2/10 6-B-Jet-Ozon, for about 5.000 bph, 10 bottles/row, adjust to 0,7 lt / 0,75 lt "Bocksbeutel-" ande 1,0 lt wine bottle, with plastic cells, built 1985.

Bottle washer, make MAG, type: Sirio 7, single-end machine, for 6.000-13.000 Fl/h, 10 bottles/row, with 80 mm bottle cells, built 1992

Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987

1 bottle carton packing machine and carton palletizer matched to the bottling capacity of the upstream Krones bottling machine with 12,000 bottles per hour for 6 bottles in 1 carton Manufacturer: Autefa automation GmbH Friedberg Germany Masch. No. 500577 Type: PP-60 Year of construction: 2010 Bottle Carton wrapping machine and cardboard palletizer plant matched to the Krones bottle filling machine with 12.000 unit per hour. Packaging system: 6 bottles in 1 carton Manufacturer: Autefa automation GmbH Friedberg Germany Machine No. 500577 Type: PP-60 Year of construction: 2010

Klinger bottle washer, year of construction: 2000, capacity approx. 10,000 bottles / hour, Siemens S7, liter cell, currently on 330 ml + 500 ml + 500 ml swing-top bottle. Bottle diameter: 50 - 90 mm / Bottle height: 110 - 330 mm. Klinger Bottle washer, Year: 2000, Capacity approx. 10,000 bph, Siemens S7, 1.0 liter pocket cell, currently used for 330 ml + 500 ml. Bottle diameter 50 - 90 mm / Bottle hight: 110 - 330 mm.

Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. With two twist-off heads the rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 17 cycles/minute (corresponds to max. 35 bottles/container per minute) | conveyor belt speed can be adjusted accordingly: 0-15m/min | bottle diameter: two ranges: a) 30-85mm, b) 80-150mm | lid diameter: customized | adjustable height of the twist off heads: 50-180mm | vacuum degree: -85kpa | materials used: mainly stainless steel 304 | protective screens and links of the conveyor belt are made of plastic | machine dimensions: L1800xW660xH1700mm | weight: 650kg. The machine phot ...

Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. 1 head rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 20 cycles/minute | conveyor belt speed can be adjusted accordingly: 0-15m/min | bottle diameter: two ranges: a) 30-85mm, b) 80-150mm | lid diameter: customized | adjustable height of the twist off heads: 50-180mm | vacuum degree: -85kpa | materials used: mainly stainless steel 304 | protective screens and links of the conveyor belt are made of plastic | machine dimensions: L1800xW660xH1700mm | weight: 650kg. The machine photo shows an open machine without protective covers and safety doors for a bet ...

Used bottle washer manufacturer: Klinger / Austria Year of construction: 2000 / General overhaul in 2010 at the Klinger Austria plant Type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Control: Siemens S7 Total operating hours: 17,443 hours Net weight: approx. 18,000 kg Steam heated Can be used for bottles: Volume: 200ml - 1.000ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm The bottle washer has so far been used for: 330ml Longneck 500ml Longneck 330ml swing top bottle 500ml swing-top bottle

The detection is set up on 0.5l glass bottles in the 20 module box. The inspector is equipped with a multi-camera system. As soon as a foreign bottle is detected in the box, it is then discharged via a pusher. Currently is set to cross travel. The detection is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in an other line. Currently the set up is for a long side leeding crate.

Machine was serviced annually. Maximum bottle diameter 69mm. Set up for the following formats: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Information without guarantee Yearly maintenance. Bottle diameter 69mm. Prepared for this sizes: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Informations without guarantee

DOUBLE-ENDED Brand: Krones Type: Lavatec D4.CS. EQ249 Year of construction: 2011 Pitch: 95 mm Control: Siemens S7 Capacity: up to 29,000 bph Operating hours: under 20,000 - 22 bottle cells / carriers - multi-part version - Loading/dispensing as well as pre- and post-treatment zones in VA - partially isolated - Hot water heating medium - Label discharge and label press Currently equipped to process 0.25l and 0.75l bottles. Suitable for processing glass bottles with a diameter of min. 54 mm / max. 80 mm and a bottle length of min. 150 mm / max. 299 mm.

Silmo Favorit Immersion Bath Sterilizer - 3-row - approx. 1,800 bottles/hour output - can be operated with peracetic acid or S0² - for bottles 0.25 / 0.5 / 0.75 / 1.0 Ltr - 110 division - Basket 92mmx 360mm - good condition

Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless stee ...

For wine and sparkling wine bottles 6000 bottles Type: WD/ 12 capacity / hour ca.:10000 More then 300 machines new and second hand on our seema .de

Bottle washing Klinger Type: Winzer Meister 8/1/50 Capacity: 1.200 - 2.000 bph stainless steel machine heating system through hot water incl. Viessman Paromat Triplex hot water system incl. label removal system, year of manufacturing: 1994 The machine was reconditioned in 2020 and it is still in production in Germany

Blower for water droplet removal in front of inspection machines

Number Of Colours: 2 // Maximum Diameter: 35 mm

Number Of Colours: 4 // Maximum Diameter: 120

bottle washing, filling, capping, labeling maschine Heads of washing, filling, sealing : 16 - 12 - 6 production capicity ( bottle/hour) : 3000 - 4000 suitable bottle : H=170-320 Ф=50 - 100 ( 330 - 1500 ml) spraying pressure : 0.25 - 0.3 total power : 2.2+0.37 weight - 2600 The CGFR series automatic washing, filling, capping and labeling machine introduces Italian technology and is made with high precision. It can carry out aseptic filling, add a constant temperature system, replace some accessories, and can adapt to heat-resistant PET bottles such like juice, tea, drinks, etc. Filling process requirements. The machine has advanced technology, small size and compact structure, suitable for PET bottles of various non-carbonated beverages (mineral water, purified water, distilled water, fruit juice, tea, beverages, etc.) at room temperature or hot filling. , and also suitable f ...

Sold is a bottle washing machine Praktika steam-heated with stainless steel basin and label discharge Capacity: 3,360 bottles/hour More information on request!

Bottle washer, Fabr. Krones, type: Lavatec KESK-212/22-80, 22 bottles/row, with 80mm Cell division, plastic cells, with attached control cabinet in stainless steel, built in 1999, L: 7,955 mm, W: 4,216 mm, H: 3,270 mm, already dismantled and stored

Bottle washer, make PAC, type: CB 10-0,5-DS7 Compact, single-end machine in stainless steel, control range 4.500 - 10.000 bph, for 0,5 lt. Euro/NRW bottles, 10 bottles/row

Output: 8000 bottles/h, machine is fully functional.

Used Bottle Sealing Wax Machine Year 2021 Versatility in Bottle Size Handling Firstly the 2021 used sealing wax machine caters to bottles ranging from 0 75 to 5 liters This flexibility allows it to adapt to various product types significantly enhancing operational versatility Advanced Customization Capabilities Moreover customization is a standout feature Manual timers enable fine tuning of wax immersion and cooling phases Additionally a manual thermostat allows for precise adjustment of the wax s temperature These features collectively ensure a superior seal for each bottle Efficiency in Energy Use of the Used Bottle Sealing Wax Machine year 2021 Furthermore the Bottle Sealing Wax Machine specification of 230V power requirement and 1 8 kW consumption underscores its energy efficiency Such specifications indicate not only a low operational cost but also an environmentally friendly approa ...

Capacity: 2000-5000 bph Electricity: 9 kW (3 fans), 440V, three phase, 50hz Dimensions: 2250x950x1700mm (H) Weight: 350kg More then 300 machines new and second hand on our seema .de

- Model: Lavatec KES - K 671/185- 2-2-312/25-110R - New chains: 2015 - Rated Capacity: 18000 BTS/h - Total caustic contact time: 11.83 min - Bottle cells: 110 mm - Bottle diameter: min/max. 50 – 100 mm, H: max. 342 mm - Number of bottles per row: 25 - Number of bottles in the machine: 5975 - Capacity of pre-soaking baths: 2880 l - Capacity: 27050 l - Capacity of caustic filter basin etc : 2120 l - Spray basin 1 lukewarm water: 700 l - Spray basin 2 lukewarm water: 700 l - Spray basin 3 cold water: 700 l - Heating medium: Superheated water - Machine in very good condition