142,528 used machines on RESALE, but how to find them? Machine Search
Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data Manufacturer / model: Krones PRESSANT UNIVERSAL 1N Machine type: container sweep-off depalletizer Year of manufacture: 2023 Application: depalletizing of glass bottles, several formats Container throughput: 14,000 containers/h (machine setting) Pallet format: flat pallets 1,200 x 1,000 mm Container conveyor height: 1,300 mm Sweep-off station: raised design for container heights above 320 mm, SEW servo drive Discharge t ...
Kronen washing machine for lettuce Dimensions: L 4100mm, W 1000 mm, H 1650 mm
KHS, Krones and Hormes are leading manufacturers and suppliers of bottling systems and machines for the beverage and liquid food industries. Bottle filler Manufacturer: KHS Type: VVF The KHS bottle filling system, type VVF (often referred to as Delta VVF or KHS/SEN VVF) is a classic, mechanically controlled back-pressure filling system that has been specially developed for filling beverages containing CO2 into glass or PET bottles Bottle capping system Manufacturer: Hormes Type: KK/SV (crown cork / screw cap combination) The machine combines two different capping technologies in a very small space. It can flexibly close bottles (mostly glass bottles) either with crown corks (for beer, lemonades) or with screw caps (for juice, wine, mineral water). Rotary Labeling Machine Manufacturer: Krones Type: Prontomatic Year of Make: 1997 Connection: 400 V, 50 Hz, 3Ph Cont ...
2018 Kronen KUJ cube, strip and slice cutting machine – used, Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing., This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor., Located in Emmeloord, the Netherlands. Available immediately – price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/kronen-kuj-2/, Machine type: Cube, strip and slice cutting machine, Condition: Used, Cutting types: Cubes, strips and slices, Infeed: Inclined cleate ...
Overview Krones filling and labelling block from 2012 for glass bottles, offered as one package: a Krones Modulfill filler/capper monoblock with 60 filling valves and 12 capping heads, and a Krones Universella cold glue labeller with two labelling stations for front, back and neck labels. The filler is specified for approx. 15,000 bottles per hour and was observed in production at approx. 14,990 bottles per hour; the labeller is rated for 20,000 bottles per hour. Both machines are in production until early 2027; the labeller has been regularly maintained by Krones. Scope of Delivery Filler/capper monoblock | Krones | MODULFILL | 60 filling valves, 12 capping heads, plastic screw caps | 2012 Cold glue labeller | Krones | UNIVERSELLA | 2 labelling stations (front, back, neck), date coder, glue pumps | 2012 Technical Data - Filler/Capper Application: filling and closing of glass bottles Fil ...
Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data Manufacturer: Krones Model: AirCo Year of manufacture: 2011 Machine type: air conveyor, neck handling of empty PET bottles Total conveyor length: approx. 60 m Declining sections: 10 sections at 10°, approx. 16.8 m in total Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right Fan units: 7, each with filter housing Diverter: 1 Conveyor sections In ...
Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data Product: still wine Containers: glass bottles, design bottle 0.75 l Line output: 12,000 bottles/h Closures: natural cork, aluminium roll-on screw caps, shrink capsules Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off dep ...
Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulders infeed rail. The access platform gives the operator safe access to the roller sorter. Technical data Manufacturer: Krones Machine type: preform feeding system for a stretch blow moulding machine Operated with: Krones Contiform S24 blow moulder In production until: March 2026 Scope of Delivery Preform buffer silo | Krones | stainless steel hopper with access stairs Preform elevator | Krones | inclined elevator from the silo to the roller sorter Roller sorter | Krones | orients t ...
Used KRONES Sensometic VP-G filling line 12000 BPH for fruit syrup - Year 1999Technical Specifications & Performance DataThis KRONES complete bottling line is configured for filling raspberry syrup, various fruit syrups and special citrus vinegar at a filling temperature of 25 °C. Built in 1999, the line handles glass bottles and PET bottles in three documented formats, combining rinsing, filling, dual capping and cold-glue labeling within an integrated industrial packaging process.Maximum production speed: 12,000 bph with 0.7L glass bottlesProduction speed: 10,000 bph with 1.0L glass bottlesProduction speed: 6,000 bph with 1.5L PET bottlesCompatible formats: 0.7L glass, 1.0L glass and 1.5L PET bottlesElectrical supply: 240/400 V, 50 HzLine direction: left to rightAdvanced Automation & Control SystemsThe bottling equipment is controlled by a Siemens S5 115 U PLC. Electronic valve contro ...
Overview Complete glass bottle line for still soft drinks and juices, built around a Krones Modulfill filler with Variojet rinser from 2015 and rated at 13,000 bottles per hour on 1 l and 22,000 bottles per hour on 0.25 l. The line runs non-returnable glass: depalletizing, rinsing, hot or cold filling, a White Cap twist-off capping machine behind the filler, hot-fill pasteurization, cooling, full bottle inspection, labelling on a Krones Prontomatic and a Langguth labeller, sleeving, tray and carton packing, incrating and palletizing, with buffer table. Two cappers are part of the line. The filler runs hot fill and can also fill cold, which widens the range of products the line can handle. There is no carbonator, so the line fills still (non-carbonated) products only. Technical data Products: still soft drinks, juices Filling: hot fill or cold fill, no carbonation Containers: non-returnab ...
Overview Krones Lavatec KES bottle washer from 2004, rated at 11,000 bottles per hour. The machine cleans glass bottles in a juice and soft drink bottling line and is still installed and under power. Technical data Manufacturer: Krones Model: Lavatec KES Year of manufacture: 2004 Output: 11,000 bottles/h Containers: glass bottles Electrical supply: 380 V, 3 phases, 50 Hz, 70 A connected load Condition Used, still installed and under power. The line produces until shutdown on 20 November 2026. Inspection on site is possible. Availability Available after shutdown on 20 November 2026. Location: Belgium.
Used KRONES contiform S10 blow molding machine 14000 BPH PETTechnical Specifications & Performance DataThe Krones Contiform S10 is a rotary PET blow molding machine designed to produce PET bottles from preforms for beverage production and industrial packaging applications. With a maximum output of 14,000 bph, this machine provides continuous bottle forming performance for a used bottling line or a second hand PET packaging project.Manufacturer: KronesModel: Contiform S10Year of manufacture: 2003Maximum production speed: 14,000 bphConfiguration: RotaryNumber of cavities: 10Current bottle format: 0.33LMaximum container height: 340 mmContainer material: PETPreform neck type: PCO 16.8Number of mandrels: 210Infeed/outfeed grippers: 6 / 6Working direction: CounterclockwiseWorking plane height: 1410 mmAdvanced Automation & Control SystemsThe blow molder is equipped with a Siemens PLC for contro ...
Overview Used spare parts for KRONES Contiform S PET stretch blow moulders (S8 to S24), sold individually from stock - no need to buy the complete inventory. The part descriptions name the executions S Gen. 2-3.1, S Gen. 4a, S Enviro and Enviro 2. Age and condition Mould carriers and heating chain: 2 years old Cams: older, without damage Electrical parts: partly from 2005, others newer. The older ones are no longer made in this form; the alternative is a retrofit at extra cost. All parts used, sold as-is without guarantee, subject to applicable law and the agreed sales terms Available parts (part number, description, quantity) Heating and preform handling 0903336518 actuation unit T50 NRS (32) 0900567351 heating chain link HZM T50 (250) 1786323181 heating mandrel, 44 mm stroke (250) 0900964406 three-phase motor 120/150 W (20) 1786323430 reflector, complete (60) 2800200575 energy-optimise ...
3-axle refrigerated semi-trailer Make: KRONE, Type: SD COOL LINER SDR27 EL4-DS, Year of manufacture: 2022, Serial number: WKESD000001055194, Registration number: 10/2022, Vehicle identification number: WKESD000001055194, permissible Total weight 39,000 kg, Double deck version, Clear interior length 13,310 mm, Clear interior width 2,460 mm, Clear interior height 2,630 mm, Refrigeration system CARRIER VECTOR 1550
3-axle refrigerated semi-trailer Make: KRONE, Type: SD COOL LINER SDR27 EL4-DS, Year of manufacture: 2022, Serial number: WKESD000001055193, Registration: 11/2022, Vehicle identification number: WKESD000001055193, permissible Total weight 39,000 kg, Double deck version, Clear interior length 13,310 mm, Clear interior width 2,460 mm, Clear interior height 2,630 mm, Refrigeration system CARRIER VECTOR 1550
Technical Specifications & Performance DataThis complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs.Production speed: 24,000 bphPrimary application: Hot-fill juiceContainer handling: PET bottlesValidated format example: 0.5L, 0.3L, 1.5LNeck mesurment: 28mmManufacturing years: 2010 (core equipment), 2011 (palletizer)Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400)Line ...
Krones Prontomatic Year of Make: 1999 Model: Model 720-18-86-130
Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomod ...
Used KRONES filling line for beer - glass - 24000 BPHTechnical Specifications & Performance DataThis used bottling line is a second hand complete glass beer bottling line engineered for industrial packaging and beverage production. It is configured around a Krones Mecafill VK2V filling monoblock and complemented by bottle washing, pasteurization, labeling, and crate handling equipment. The line is optimized for glass beer bottles and delivers reliable output with precise control of product quality parameters.Rated capacity: 24,000 bottles/hour at 0.5LCompatible formats: 0.33L and 0.5L beer bottlesContainers: GlassFilling monoblock: Krones Mecafill VK2V 066-103/KK (1999), 66 filling valves, double air evacuation, integrated rinser with 60 heads (pressurized water) and 11 capping headsLabeling: Krones Prontomatic 720-18-86-130 (1999), cold glue, front/back/neck applicationBottle washers: K ...
Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Q ...
Technical Specifications & Performance Data Line type: Used complete bottling line (second hand) configured for PET still water Manufacturers: Krones and Gebo Cermex Year of build: 2013 Nominal speed: up to 31,500 bottles/hour (0.35 L and 0.50 L) Bottle formats: 0.35 L, 0.50 L Container type: PET with 29/25 neck Product type: Still water (non-carbonated) Main modules: Krones Contifeed preform feeder, Krones Preform Check Inspector, Krones Contiform stretch blow molder, Krones ErgoBloc L 40-15 blow–fill–cap monoblock, Krones Checkmat cap inspector, Krones Contiroll roll-fed labeler, Gebo Cermex shrink wrapper, Gebo Cermex case packer Line condition: In production Documentation: OEM manuals available Safety: Safety features and guarding included Advanced Automation & Control Systems This used bottling line leverages Krones’ integrated line control for synchronized blow molding, filli ...
Used KRONES Gera Returnable Glass Bottling Line, 20000 BPHTechnical Specifications & Performance DataThis used bottling line is a complete returnable glass bottling line designed for handling bottles in crates, covering the process from crate preparation through filling, labeling, inspection, crate packing and palletizing. The line combines equipment from Krones, Kettner, Rink, Syscona, Matec, Falterbaum and Bohrer.Filler capacity: 20,000 bphFilling type: isobaric filling (counter-pressure) - ( Heineken-style)Premix capacity: 22,000 L/hContainer formats: 0.33L and 0.75L returnable glass bottlesPackaging configuration: bottles in cratesClosure type: plastic screw caps Labeling technology: wet-glue labeling with 2 aggregatesMain equipment years: 1996–2016Advanced Automation & Control SystemsThe line includes automated systems for crate sorting, crate decapping, bottle unloading, washing, ...
Equipped with 7 discs, 3 mower drums, belt drive, folding swath boards Auction-ID: A1-47396-1101
Krone WP 7.7 N2S-CS Curtain-Side Swap Body Manufacturer: Fahrzeugwerk Bernard Krone GmbH Model: WP 7.7 N2S-CS Equipment type: Curtain-Side Swap Body Serial number: W0356549 Country of manufacture: Germany Detachable curtain-side swap body designed for interchangeable road-freight transport and transfer between compatible truck/chassis systems. Technical specifications: Permissible gross weight: Approx. 16,000 kg Tare weight: Approx. 3,240 kg Customs transport approval: SI/06/11 Equipment / features: Sliding curtain sides Fixed front wall Support legs Detachable swap-body construction Heavy-duty freight loading platform Approx. dimensions (L × W × H): 7,700 × 2,550 × 2,900 mm Weight: Approx. 3,240 kg Condition: Used. Curtain system, supporting structure, floor, support legs and locking/mounting points should be inspected before transport or use. A ...
Krone SD Curtainsider Semi-Trailer Manufacturer: Krone Model: SD Equipment type: Curtainsider Semi-Trailer Axles: 3 Three-axle curtainsider semi-trailer designed for general road-freight transport of palletized, packaged and other commercial cargo. Technical specifications: Permissible gross weight: 36,000 kg Technical maximum weight: 39,000 kg Axle load: 3 × 8,000 kg at 36,000 kg rating Technical axle load: 3 × 9,000 kg at 39,000 kg rating Kingpin load: 12,000 kg Equipment / features: Sliding curtain sides Double rear loading doors Three-axle configuration Heavy-duty freight chassis Dimensions (L × W): 13,860 × 2,550 mm Approx. height: 4,000 mm Approx. weight: 7,000 kg Condition: Used. Visible exterior wear, staining and localized corrosion consistent with commercial use. Curtains, floor, rear doors, chassis, brakes, suspension, tyres, lighting ...
Krone WP 7.7 N2S-CS Curtain-Side Swap Body Manufacturer: Fahrzeugwerk Bernard Krone GmbH Model: WP 7.7 N2S-CS Equipment type: Curtain-Side Swap Body Serial number: W0356572 Country of manufacture: Germany Detachable curtain-side swap body designed for interchangeable road-freight transport and use with compatible truck/chassis systems. Suitable for palletized, packaged and general cargo. Technical specifications: Permissible gross weight: Approx. 16,000 kg Tare weight: Approx. 3,240 kg Body width: 2,550 mm Customs transport approval: SI/11/11 Equipment / features: Sliding curtain sides Fixed front wall Support legs Detachable swap-body construction Heavy-duty freight loading platform Approx. dimensions (L × W × H): 7,700 × 2,550 × 2,900 mm Weight: Approx. 3,240 kg Condition: Used. Curtain system, supporting structure, floor, support legs and lock ...
Rigid Box Swap Body – Unit 003 Equipment type: Detachable Rigid Box Swap Body Unit marking: 003 Enclosed rigid swap body designed for general dry-freight transport and use with compatible truck/chassis systems. Equipment / features: Rigid enclosed box construction Double rear loading doors Support legs Detachable swap-body configuration General dry-freight cargo body Approx. dimensions (L × W × H): 7,700 × 2,550 × 2,900 mm Approx. weight: 3,000 kg Condition: Used, fair to poor condition. Significant surface corrosion is visible around the rear door hinges, rear frame, lower body edges and support structure. Body, rear doors, floor, support legs, locking points and structural condition should be inspected before transport or use. Auction-ID: A7-51404-10
Krone WP 7.7 N2S-CS Curtain-Side Swap Body Manufacturer: Bernard Krone GmbH Model: WP 7.7 N2S-CS Equipment type: Curtain-Side Swap Body / Container Serial number: W0356569 Customs approval: SI/09/11 Country of manufacture: Germany Detachable curtain-side swap body designed for interchangeable road-freight transport and use with compatible truck/chassis systems. Approved for transport under customs seal. Equipment / features: Sliding curtain-side construction Fixed front bulkhead 4 support legs Detachable swap-body configuration Customs-seal transport approval Approx. dimensions (L × W × H): 7,820 × 2,550 × 2,900 mm Approx. weight: 3,240 kg Condition: Used. Significant age-related wear, surface corrosion and paint deterioration are visible, particularly around the lower front structure and support legs. Curtains, floor, supporting structure, legs and l ...
Krone WK 7.7 NSTG Rigid Box Swap Body Manufacturer: Bernard Krone GmbH Model: WK 7.7 NSTG Equipment type: Rigid Box Swap Body / Container Year: 2001 Serial number: W101162472 Demountable rigid box swap body designed for interchangeable road-freight transport and use with compatible truck/chassis systems. Suitable for general dry cargo and palletized goods. Technical specifications: Permissible gross weight: 16,000 kg Empty weight: 2,900 kg Customs-seal approval: D-5000-5/2000 Approval/reference: SLO/649/2001 Owner/holder marking: TCI, Slovenia Equipment / features: Rigid enclosed box body Double rear loading doors 4 support legs Detachable swap-body construction Approved for transport under customs seal Approx. dimensions (L × W × H): 7,700 × 2,550 × 2,900 mm Weight: 2,900 kg Condition: Used. Visible age-related exterior wear and corrosion, part ...
De Girolami Rigid Box Swap Body – Unit 642 Manufacturer / Branding: De Girolami Equipment type: Detachable Rigid Box Swap Body Identification number: 642 Additional marking: Ujcic d.o.o. Enclosed rigid swap body designed for interchangeable dry-freight transport and use with compatible truck/chassis systems. Suitable for general cargo, palletized goods and logistics applications. Equipment / features: Rigid enclosed dry-freight body Double rear loading doors Support legs Detachable swap-body construction Rear door locking hardware Approx. dimensions (L × W × H): 7,700 × 2,550 × 2,900 mm Approx. weight: 3,000 kg Condition: Used. Exterior shows normal weathering and localized corrosion around the support legs, rear door hardware and lower frame. Body structure, floor, rear doors, support legs and locking/mounting points should be inspected before transpor ...
Liquid-tight underbody, Full-length chassis, with optimized shock resistance, Rear portal practically designed Carrier Vector 1950 with double evaporator Auction-ID: A1-47426-801
Krones Checkmat 731 Inspection System (2012) Auction-ID: A1-51927-45
8 tops Hydraulic edging Cardan shaft Signage Auction-ID: A1-51949-66
Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011 ...
tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. L = approx. 2.80 m / D = 1.60 m / weight approx. 1.3 tons. / ex works, freely charged. General: You will receive an invoice with VAT shown. The purchase ...
sell a Strautmann PET BP 900 for PET bottles! Built in 2006, just a few hours of operation!
used
with 60 rinsing stations, 80 filling valves and 14 head screw capper Capacity: 2.0 l dia 99.8 x H= 350.00 mm - capacity: 7,000 bph 1.0 l dia 81.37 x H= 276.17 mm - capacity: 14,000 bph 0.6 l dia 68.0 x H= 245.16 mm - capacity: 20,000 bph The filler and rinser will be completely dismantled. All gear wheels on the filler are brand new. So the main bearing will be renewed. The filling valves will be complete renewed into new generation neck holding filling valves. The product inlet pipe will be renewed. All types will be renewed. So the Alcoa screw capper will be complete dismantled and modified, with a pick in place system to handle 28mm plastic screw caps. The AVE rinser will also be complete dismantled and rebuild from the beginning. The filling valves of the filler are neck holding filling valves so the filler does not have lifting cylinders anymore. The complete bottle tra ...
Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002
PET line for 0,5l Filler XRB 16, year: 1997 Power: 3000 bottles / St
The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as cans, PET, metal buckets, metal containers, but also plastic canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 2 ...
UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense
Sidel SBO 12 PET Stretch Blow Moulding machine. Sidel SBO 12 PET Stretch Blow Moulding machine The Sidel SBO 12 blow molding machine is a state-of-the-art bi-oriented PET blow molding machine designed to produce high-quality bottles for flat and carbonated beverages at a rate of up to 19,200 bottles per hour. Utilizing a cold process, this system offers excellent flexibility and optimized production. Key features include: Cold Preform Infeed: Preforms are automatically loaded and transferred through a reheating system, ensuring precise temperature control. Efficient Heating & Blowing: Preforms are heated and blown into bottles through two-stage high-pressure air blowing for uniform wall thickness. Advanced Molding System: With automatic ejection for defective preforms, the SBO 12 ensures consistent bottle quality, while synchronized cams optimize the entire manufacturing pro ...
ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition
PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET
2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour
maximum number of results exceeded
please refine your search
19.500 € 
