We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,626 used machines on RESALE, but how to find them? Machine Search
used
This HWACHEON SIRIUS U Vertical Machining center was manufactured in the year 2010 in Korea. It is equipped with a Fanuc control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.
used
This Hyundai Wia KF 5600C Vertical Machining center was manufactured in the year 2017 in Korea and has 1800 production hours. It is equipped with a HYUNDAI WIA Fanuc Series 0i control unit. The machine has a spindle speed of 12000 rpm and operates with tool holder BBT40.
used
This DN SOLUTIONS DVF 6500 Vertical Machining center was manufactured in the year 2021 in Korea. It is equipped with a Siemens mod 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.
used
This DOOSAN DNM 500 (2012) 4-axis Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a 8,000 rpm spindle, BT40 tool taper, a 4th axis (lehmann rotary table - dividing head) and a FANUC control unit. The table size is 1200 x 540 mm (X-axis 1020 mm / Y-axis 540 mm / Z-axis 510 mm). As additional equipment it comes with chip conveyor and internal cooling (IKZ). The machine is in very good condition due to installation of a new spindle and refurbishment of the rotary table in 2021. The rotating union has also renewed recently in 2024. It has operated 24420 run time hours and 9802 cutting hours.
used
This Vertical Machining centre Hyundai Wia F500D was manufactured in the year 2012 in South Korea ans has 8508 operating hours. It is equipped with a Fanuc i Series. The machine includes a through-spindle coolant capability and a chip conveyor. The technical documentation and electrical schematics are available.
used
This DOOSAN DNM 650 Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a HEIDENHAIN iTNC 530 control and internal cooling - IKZ - 18 bar. This 5-axis machining centre has a ISO 40 spindle with 12,000 rpm and 18kW motor power. It comes with presetting, chip conveyor and a 30 tool magazine. The table size is 1300 x 700 mm.
used
This DOOSAN VCF 850LSRII Vertical Machining center was manufactured in the year 2022 in South Korea. It is equipped with a 3,000 mm X-axis travel and controlly by a FANUC 31iB5 Plus control unit. The machine has 5-axis with a spindle speed of 12000 rpm. It is like new as only operated for 758 cutting hours. The VCF series is a perfect solution for multi-purpose machining for supreme rigidity. Machine has CE Conformity. See photo and video gallery for more impressions.
new
TOPHAMMER ENGINE - CUMMINS , 260hp,QSB6.7,Tier 4 COUNTRY OF PRODUCTION - South Korea DELIVERY - EXW
used
DOOSAN LYNX 220 LSYC 5-AXIS CNC turning center was built in 2014 in South Korea. In order to meet all production requirements, the machine uses state-of-the-art components and technologies, which combined with an extremely stable design offer the best precision and turning performance in its class. In addition, the offered equipment allows even the most intensive machining process to be streamlined and fully automated in any production facility. Workpieces with a maximum length of 510 mm are machined inside a large working area with two high-speed spindles. During the machining process, the specially designed bed of the machine effectively dampens all vibrations and oscillations, resulting, e.g. in improved workpiece surface quality and increased tool life. The offer includes a wide range of equipment, such as the Y axis, bar feeder, measuring probe and the intuitive DOOSAN FANUC i ...
used
DOOSAN LYNX 220 LMSC CNC turning center was manufactured in 2015 in South Korea. This extremely efficient and reliable machine is able to streamline even the most demanding machining process in any production facility, thanks to the use of, among others, two high-speed spindles and an extremely stable design. Workpieces with a maximum diameter of 240 mm and a length of 510 mm are machined inside a large working area equipped with a specially designed bed. The bed effectively dampens all vibrations and oscillations, resulting in a better quality of the machined surface and increased service life of the cutting tools. To this date, the DOOSAN LYNX 220 dual-spindle CNC lathe has worked a total of 2198 hours and has been used exclusively for machining stainless steel. The total weight of the machine is 3400 kg. Technical data of the DOOSAN LYNX 220 LMSC CNC lathe General data - feeds in ...
used
Slitting line HJ Loop 1600mm x 9mm x 50,000Lb (A3790) for longitudinal cutting of coil metal into strips of required width up to 9mm metal thickness Year of Manufacture: 2002 Make: HJ ENG,KOREA Raw Material: HR Coil Tensile Strength: Max. 50Kg/mm2 Yield Strength: Max. 30Kg/mm2 Coil Thickness: Min. 1.2mm ~ Max. 9.5mmT Coil Width: Min. 400mm ~ Max. 1,650mm Coil Weight: Max. 25,000Kg Coil Inside Diameter: 508mm Coil Outside Diameter: Min. ∅1,000mm ~ Max. ∅2,000mm LINE DATA Line Speed: Max. 150/80m/min Threading Speed: Max. 20m/min Slitting System: Pull & Drive Cutting by DC Power Control Slitting Width: Min. 40mm ~ Max. 1,300mm Slitting Number: Max. 30Cuts x 29Strips Pass Line Height: 900mm Line Threading Direction: Left To Right Coil Car With Coil Skid Uncoiler Coil Peeler Coil Opener Three(3) Bending Roll No.1 Pinch Roll Crop Shear with Guide Table Si ...
Qty. 1 Second-hand JCO pipe welding line Mfc.: Korean Company Installation date: 11 - 2008 Production types: KS, JIS, ASTM, API, Material: API 5L. 2B.X-80under mild steel Product capacity: 70,000 ton/year Product size O.D.: 406 – 1676 mm - 16”~66” Length: 5~16 m Wal Thickness: 9~80 mm Voltage supply: 440 V or 380 V, 220 V, 60 Hz Manufacturing process: Plate stacking Edge Milling Pre Bending Press Forming Tack Welding Welding Calibration Machining Pipe Ends Hydro Static Test NDT (RT & UT)
Qty. 1 Second-hand taper pole pipe production line We have following taper pole pipe production line for sale Mfc.: CMF, Delem, Merkel, Bosch, Nachi, YSD, ESAB, (France, Korean, Japan and Chinese Manufacturer) Built: 2006 Stopped: 2012 3. Product Capacity: Profile 5,000 ton/year / Round pipes 10,000 ton/year i. (Capacity : Profile 6.9 pcs/Hr, Round 3.6 pcs/Hr) Price: Please provide us with your offer! (Further information can be submitted on request!) Production Description Size for Product Pole or Pipe type Conical Pole PolygonalPole Round Pipe Thickness mm 2.6,3.7,5.2,7.5 10 2.6,3.7,5.2,7.5 10~20 20~38 O.D mm ?190 ~ ?463 ?190 ~ ?820 22”~ 32” Length M 2.45 ~ 16.0 2.45 ~ 16.0 6.2 ~ 12.8 Rake About 0.43° About 0.43° Intensity Mpa T.S=510, Y.P=360 T.S=510, Y.P=360 T.S=650, Y.P= 50 ...
used
Line for extrusion of XPS polystyrene foam boards with ultra-low density 20 kg/m3 and compressive strength 250-300 kp using technology patented in Ukraine with a set of additional innovative devices. Board parameters: width up to 1200 mm, thickness up to 200 mm, length is not limited. Extruder 180/235mm L/D 28-40 manufactured by the Korean company MYUNG-IL FOAMTEC Foaming gases - CO₂, DME, HFC, HFO, propane-butane, isobutane. Pumping equipment set Capacity up to 50m3/h (1000kg/h) Weight – 60t. Line length -90m, width 6m. Power consumption – 650 kW The extruders operated for a year and a half after the plant was sold to another owner, and the rest of the time the line was in storage.
used
The company PC BRASK LLC sells the milling processing center VMC 530 assembly China - 2014 of release. XYZ displacement: 500x300x410 mm Table size: 690x430 mm Maximum table load - 250 kg Spindle Taper - SK40 The maximum spindle speed is 10,000 rpm. Tool magazine - 16 items Control stand - Siemens 808D (Germany) Guides and spare parts for the Korean machine. Chip conveyor Overall dimensions 2050х1600х1800 mm Total weight - 2 800 kg. The machine is in excellent condition. Connected - you can see it at work at any convenient time.