kor used for sale

Various Grinding Stones

Corundum stone wet grinder Koruma Fryma T4 Reconditioned good working machine with 250 mm new stones for wet grinding. With double jacket for cooling and with electrical panel. 1 extra set of new stones 250 mm. Power 400v , 18,5 kw

Various grinding stones for Fryma Koruma

Various grinding stones for Fryma Koruma

Various grinding stones for Fryma Koruma

Cat. No. 12-2450 in a very good condition Manufacturer: Disho Koruma Motor number: 155343 Type: VP 180/3300 Width: 2064 mm Length: 3040 mm Height: 3470 mm Weight: 4200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Korimat KA 160 autoclave, 120 liters, 1.6 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, smooth surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Korimat KA 160 autoclave, 240 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine at our facility in 56070 Koblenz, Germany.

Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine at our facility in 56070 Koblenz, Germany.

For sale various grinding stones for corundum disc mill KORUMA

Y.O.M.: 1991 No.: 4745 2 hoppers, 1x with double jacket Scraper agitator speed-controlled Homogenizer speed-controlled Double jacket pressure-resistant Temperature controller, vacuum Condition: very good Dimensions LWH: 1100 x 600 x 950 mm Weight: approx. 300 kg

- Total height: 1000 mm - Turnboard to top edge sack: 900 mm - Base plate / foot: 1000 x 1000 mm Details The rotary device can hold 4 plastic bags (used to accommodate small parts of a injection moulding machine). After reaching a number of pieces (pulse that the bag is full), the device rotates 90°. Equipped with an engine and gearbox, as well as a sensor that triggers every 90°, the control can be adjusted depending on the system, total height up to sack top edge 980 mm, rotation speed 4.5 rpm, via another gear the speed can be adjusted

new Fan type MV2000 EVO 5 Manufacturer MEKICS Co., Ltd Korea special bargain price now !

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

Corundum disk

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 189 mm -Width: 16 mm -Price: per piece -Number: 1x available -Weight: 1.1 kg

High-resolution inkjet printer with many possibilities. For coding and marking absorbent materials such as folding cartons, trays, bags, sacks or individual products up to 8 lines plus graphics and barcodes. Character height from 1.5 to 18 mm Product benefits at a glance High-resolution inkjet printing: 128 individually addressable dots per printhead. Completely free print image design within the text area. Combination of text, logos and barcodes in one printed image. Kortho Image Generating Software for logical image creation on the pc. Unique infrared remote control: no wired connection required. Separate, refillable ink tank with industrial-grade volume. Clean, easy filling with ink during operation. Very low cost per print. Printing costs can be calculated by program. Maintenance reduced to a minimum. No need to rinse with solvent. The advanta ...

Processing plant Manufacturer: Koruma Type: Disho A140/200 No.: 4,209 Built: 1988 with user manual no vacuum, no double jacket with control cabinet LWH: 1400 x 850 x 1450 mm

Korsch EK III single station eccentric tablet press, maximum tablet diameter 60mm, maximum depth of fill 70mm (currently set for maximum 30mm depth of fill). Maximum pressure 200kN. Four speed (11, 22, 32, 42 strokes/minute) capacity up to 2520 tablets per hour, using a single-tip tool.

Processing plant Manufacturer: Koruma Type: Disho Lab-15 Machine no.: 6023 Year of construction: 2000 very good condition with scraper mixer with control cabinet & touch panel Container lid swiveling LWH: 1500 x 900 x 1600 mm

Control Heidenhain TNC 407 Working routes x/y/z about 600 mm / 350 mm / 400 mm Spindle speed range 20 - 4,000 rpm Tool holder SK 40 Drive power 5.5 kW Power requirement about 12 kW Machine weight about 2.2 kW Dimensions width/depth/height about 3.44 m / 3.05m / 1.91 m Accessories: Touch system for digitization

Packaging machine for plastic and paper cards ISO 7810, 85.6 x 54.00 mm BOPP cellophane film - speed 100-120 cards per hour Older but functional and trouble-free machine, still in use, if only 1-2 times a month available in 6 months

dist. between pillars (left to right): 600 mm stroke: 50 mm max. loading: 100 kn total power requirement: kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m Universal tensile tester, Software ZWICK Testexpert The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 600 mm z-travel: 500 mm control: Heidenhain 426 milling-head swivable +/-: NC round table: NC Tool changer: : spindle taper ISO: 40 Tool changer: 40 table diameter: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a homogenizing plant Koruma V160/400 for the production of ketchup / mayonnaise, etc.

Tool milling machine from a training workshop in very good condition Manufacturer Klopp Korradi Year of construction 1991 Digital SK40 automatic feed in three axes Drilling pinole 50 mm Head rotatable Spindle speeds up to 45-1950 rpm x-310 mm y-180 mm z-310 mm Table 600 x 250 mm Feed infinitely variable 10 - 470 mm/min. Machine dimensions approx. 1.0 x 1.1 x 1.6 m Power connection 400Volt 10 Ampere 3-axe digital device AXEsta Counter-holding for horizontal milling Coolant device Chip tub Special price

x-travel: 700 mm y-travel: 350 mm z-travel: 450 mm table-size: 1100 x 300 mm spindle turning speed range: 31,5 - 1400 U/min feed - longitudinal/cross: 12,5 - 630 mm/min rapid traverse longitudinal and cross: 2500 m/min feed range - vertical: 1250 mm/min spindle taper:: SK 40 total power requirement: 7 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1,6 x 1,8 x 1,8 m The machine comes from a training company and has been maintained more than second hand. The general condition is according to the age, very good, all functions have been checked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered here is a vacuum evaporator for wastewater from Korrotherm, model K750. Suitable for chloride-containing and aggressive wastewater Completely technically overhauled and not put into operation since then - like new The Korrodest evaporator system provides a fully automatic low-temperature evaporator system, which is largely autonomous, i.e. without permanent monitoring. by operating personnel. The plant is designed for the processing of diluted, even chloride- and sulphur-containing rinsing water from surface technology. The incurred Rinsing water is thermal, in a vacuum of about 50 mBar, corresponding to about +35°C evaporated and separated into two components. On the one hand, in the distillate, which can be produced up to 98% of the volume flow rate, and on the other hand into the concentrate, which can be concentrated to a density of approximately 1.3 – 1.35  ...

Corundum disc mill Manufacturer: Koruma Type: T-3 Item #: 564 Year of construction: 1974 Power: 13 kW very good condition with funnel with outlet chute (coolable) with cable & plug LBH: 700 x 500 x 1350

Vacuum deaerator Manufacturer: Koruma Type: ERV (nameplate missing) Motor power: 1.1 kW with two pumps, speed controlled good condition LBH: 1500 x 750 x 2100 mm

x-travel: 400 mm tool taper: SK 40 : schwenkbar table:: schwenkbar vice: . weight of the machine ca.: 1,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure press Korrex Nuremberg Korrex Nuremberg , completely overhauled with 3 sets of paint rollers. Electric paint trituration , Washing doctor blade .

KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available

Inline homogenizer Manufacturer Koruma Type DIL 160 Power 22 kW

Inline homogenizer Koruma Type 120 with star triangle circuit

Designed to distribute many different types and grades of cheese onto products. It can also be used for distributing raisins, chocolate chips, diced meats, vegetables or almonds.

Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain

Pressure press Korrex Berlin , format 50 x 65 A special feature of the machine is that the machine has a color box and 220 volts.

Used tablet press made by KORSCH, model PH 343. New 1977.

Used tablet press made by KORSCH Pharmapress 300 series. Model PH 343. Tablet diameter 6-13mm. 43 stations. 4 pieces available (2 x 1984, 1 x 1989, 1 x 1990)

x-travel: 480/500 mm y-travel: 230/250 mm z-travel: 380/400 mm speeds: 45 - 2240 U/min table surface area: 1000 x 250 mm tool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 3 kW weight of the machine ca.: 1550 kg dimensions of the machine ca.: 2600 x 2200 x 1800 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Processing plant Manafacturer: Koruma Type: Disho V160/300 Filling volume: 300 l Batch volume: 240 l Year of construction: 1983 No.: 3143 Power: 18.5 kW with pneumatic vertical lift with pressure gauge & sight glass LWH: 1600 x 850 x 2200 mm

Corundum stone mill Manafacturer: Koruma Type: 5-E Item no.: 3046 Year of construction: 1982 Power: 44 kW with screw pump (speed-controlled) overhauled and with new bearings with oulet chute & sight glass with control cabinet mounted on frame LWH: 2000 x 800 x 2000 mm

Processing plant Manafacturer: Koruma (Nameplate missing) Type: Disho V160/400 Filling volume: 400 l Batch volume: 320 l no vacuum no double jacket with control cabinet, recirculation line & three-way valve LWH: 1500 x 1050 x 1550 mm

Used Fryma Koruma colloid mill, model MZ130. Head size: 130mm Rotor: wide teeth spacing Stator: wide teeth spacing Equipment installed: pump impeller for better pump performance Ejector: centrifugal disc Stepless axial adjustment of the grinding gap Manual stator adjustment, analog measuring instrument Machine housing: possibility of heating with a double jacket Connections: 3/8 Protection class (basic): IP 55 Operating voltage: 400 volts, 3 phases, neutral, PE Frequency: 50Hz Seal quality: EPDM Unions: dairy unions DIN 11851

Vacuum homogenizing plant Manufacturer: Fryma Koruma Type: MaxxD1300 Hopper 1300 litres Capacity 250 - 1100 litres/batch Homogenizer max. 3000 rpm, 37 kW Mixing max. 32 rpm Heating steam, max. 6 bar CIP cleaning 6 bar, 15 m³/h Vacuum pump SIHI Sterling 82 m³/h liquid ring Compressed air 8 - 10 bar Power 3 x 400 V, 50 Hz, 51 kW Dimensions: 3250 x 2000 x 3250 mm Weight 2900 kg Vacuum mixing, dispersing and homogenizing With double jacket and scraper/agitator Wilden diaphragm pump Enter XPS15 Pro-Flo Liquid inlet/outlet 76 mm Capacity max. 900 l/min. Compressed air max. 8.6 bar Dimensions: 900 x 500 x 900 mm

• Single rotary press with 47 punch stations • Tool type EU 19 with BBS dies (die diam. 22 mm) • Unkeyed turret • Output 28,200 - 282,000 sheets/hour • Pressing force max. 80 kN, pre-pressing force max. 20 kN • Tablet-diam. max. 13 mm • Tablet height max. 8.5 mm • Filling depth max. 18 mm depending on filling curve (filling curve 10 mm fitted) • Filling hopper with flange for docking Bohle container MCG500/900 for powder feeding • Agitator blade filling shoe (Fill-o-matic) for fine powder materials (1 spare filling shoe available) • Fast diverter for missing tablets • Korsch PHK2i Plus press force control system • Touch screen Siemens, software operating system Windows CE • PLC Siemens S7-400 • Existing tool set 2x 47 pieces for tablet-diam. 9 mm, flat/flat with facet • Drive 400V/50Hz • New cabling between control cabinet and machine (wi ...