klaeger hba 220 used for sale

• For feeding of brochures etc. • Speed of friction straps max. 240 m/min • Width of product max. 650 mm • Length of product min. 165 mm • Height of magazin appr. 700 mm • Speed adjustable • Quantity control • Frequency controler Danfoss • Servocontroler Elau PacDrive MC-4 • 230 VAC/50Hz/3A Friction Feeder without control (PLC), must be integrated into a machine control system (PLC), or must equipped with a separate control system. We can offer this work on request.

Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz

New Woodward EasyGen-2200 Series Part Number 8440-1855 digital Control Controller Available In Stock.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 49000 € : 994.7 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll leng ...

Travels: X-axis 2,200 mm; Y-axis 560 mm; Z-axis 720 mm Control 840 D Powerline ShopMill Siemens Main Spindle: Speed range - main spindle 20 - 12,000 min/-1 Drive power - main spindle 35 / 25 kW Max. torque 130 / 87 Nm Tool holder SK 40 Inner coolant supply 40 bar Workbench: Table clamping surface 2,600 x 600 mm max. table load 2,200 kg Tool changer: Number of tool slots 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm Spindle hours: approx. 13,326 h Switch-on hours: ca.36167 Feeds: Feed speed 20,000 mm/min Input fineness 0.01 mm Rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min Total power requirement 60 kVA Machine weight approx. 12.5 t Space requirement approx. 6.0 x 3.7 x 2.9 m Documentation Conveyor Coolant system High-pressure cooling Inner coolant supply 40 bar electr. Handwheel Workspace lighting

RUHLE / RÜHLE MPR 220 Vacuum Cooling Tumbler / Mixer Tablet control (height adjustable) Automated lid opening and closing tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Quick arm fastening Scraper, pressure assembling variable speed from 0-50 RPM vacuum system from 0-90% 220 liters tumbler capacity

Radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, , , ventilation fan, blower -Fan: centrifugal fan exhaust fan -Type: unfortunately without type designation -Voltage: 380V/3ph. / separate windings -Speed: 550 / 750 rpm -Inlet: Ø 220 mm -Air duct connection: 190 x 145 mm -Dimensions: 410/380/H190 mm -Weight: 10 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm -Total dimensions: 690/490/H300 mm -Weight: 72 kg

Transnorm conveyor belt GF 22000-900-800 RA2186 Technical data: Conveyor length (NL): 22000 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 22000 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed  ...

Transnorm Rising falling Incline with arch belt conveyor GF 2200+1300-700-600 RA2189 Technical data: Conveyor length (NL): 3500 mm ( 2200 mm incline + 1300 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3500 ( 2200 + 1300 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type:  ...

Transnorm Rising falling Incline with arch belt conveyor GF 2200+900-700-600 RA2190 Technical data: Conveyor length (NL): 3100 mm ( 2200 mm incline + 900 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3100 ( 2200 + 900 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW ...

VECOPLAN VAZ 220/200 KNF, single shaft shredder for plastics, constructed in 2000, imfeed width 2200 mm, working width: 2000 mm, Rotor Ø 495 mm, n.56 knives size 60 x 60 mm., Rotor speed 125 rpm, 132 kW drive, 400V 50 Hz, Machine weight : about 14 tons, Upper ram, feeding hopper, various screens available, Electrical panel, Users manual, drawings available, This machine is offered totally reconditioned, (last group of photos is of a twin machine just reconditioned), width: 2.000 mm. (78.74), Power: 132kw

thickness of jaw: 220 mm max. clamping width: ca. 275 mm high of jaw: 63 mm weight: ca. 70 kg New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 780, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg 570C 2200-1300 Injection Molding Machine / Hybrid Machine Production year : 2005 Injection system : Screw diameter: 60 mm Injection weight: 558 g Injection pressure: 2000 bar Dosing volume: 664 ccm Locking system : Clamping force: 220 tons Distance between columns: 570x570 mm Size of mounting plates: 795x795 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control system: SELOGICA Additional equipment: Hybrid machine: fast, energy-efficient Euromap 67 Hydraulic core extraction x 2 Injection system - bimetal Machine Main Motor--Inverter Driven Servo Motor--Energy Saving Dimensions: Weight: 9300 kg Length/Width/Height: 6.16x1.91x2.39 m

Key data: 2200 kN, 60 mm

warehouse no.: 503302 manufacturer: ARBURG type: Allrounder 570 S 2200-1300 controller: Selogica year of construction: 2009 operation hours: 25044 h clamping force: 2200 kN distance between tie bars h:: 570 mm distance between tie bars v:: 570 mm size of mould plates h: 795 mm size of mould plates v: 795 mm min. mould height: 250 mm max. open daylight: 900 mm opening stroke: 650 mm screw diameter: 60 mm swept volume: 664 ccm injection pressure: 2000 bar equipment included: screen text german core pulling hydraulically 3x machine incl. hopper loader machine incl. Handling machine incl. safety fencing machine without material hopper Anti vibration mounts technical data robot-system handling type: Linearhandling manufacture: Arburg controller: Multilift year of construction: 2009 handling weight: 15 kg X axis: 700 mm Y axis: 1000 mm Z  ...

plate thickness: 6.5 mm thickness at Niro-steel: 5.0 mm angle adjustable from - to: 30 - 140 Grad no. of strokes: ca. 50 Hub/min table:: 950 x 1030 mm blade length: 220 x 220 mm total power requirement: 4.0 kW weight: 800 kg range L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros Special price on request Furnishing: - electro-hydraulic notching machine - Multi-functional machine with 2x workstations 1x notching, 1x bending station including bending tools - manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment - large / stable work table - 2x angle stop, adjustable - automatic cutting gap adjustment - freely movable foot switch - Connection cable + 16A plug - Cutting performance: 6.0 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -93970 ...

Key data: 790 V, 1000 , 400

Deutz MWM Gas Generator TBG 620 V12 gas-fired power generators from 1998, Motor and generator on base frame. 1 available 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2, 1,000 KVA Gas engine Deutz MWM TBG 620 V12 Manufacturer: Deutz MWM Model: TBG 620 V12 Type: Gas Engine Serial Number: 2200047 Power [KW]: 790 Year of construction: 1998 Hours:– Weight of aggregate [kg]: 7.800 AC Generator Stamford PE734C2 Manufacturer: Stamford Model No.: HC I634K2 Type: AC Synchronous Generator Serial number:– Power [KVA]: 1,000 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1443 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 2513

Key data: 790 V, 1000 , 400

Deutz MWM Gas Generator TBG 620 V12 gas-fired power generators from 1998, Motor and generator on base frame. 1 available 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2, 1,000 KVA Gas engine Deutz MWM TBG 620 V12 Manufacturer: Deutz MWM Model: TBG 620 V12 Type: Gas Engine Serial Number: 2200073 Power [KW]: 790 Year of construction: 1998 Hours:– Weight of aggregate [kg]: 7.800 AC Generator Stamford HC I634K2 Manufacturer: Stamford Model No.: HC I634K2 Type: AC Synchronous Generator Serial number: 0095677/01 Power [KVA]: 1,000 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1443 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 2513

Offer 24001 Specifications: - Working width 3050 mm - Printing capacity 220 t - Passage between uprights 2550 mm - Table width 405 mm - Projection 350 mm - Installation height approx. 240 mm - Plunger stroke 270 mm - Working height approx. 920 mm - Engine power approx. 15 kW - Oil filling approx. 300 l - Space requirement approx. W 4200 x H 2980 x D 2300 mm - Weight approx. 12500 kg - With: - Swivel arm – control panel with CYBELEC control - for 4 axes Y1 + Y 2 , X , Z -Mot. Back gauge with mot. Controlled height adjustment - Crowning - Safety – light barrier - 4-fold universal die + divided. Sharpening tool 3000 mm - Deer foot tools, V – dies 2900 mm - Other tool sections - E.- Footswitch, - Support arms

swing diameter: 2400 mm turning height: 2145 mm Control: Siemens 840 D turning speeds: 250 U/min Speed range - c-axis: 0,0025 - 3,15 U/min Smallest input increment of the c-axis: 1/1000 ° speed steps of main gearbox: 2 x-travel: +-1350 mm z-travel: 1500 mm Positioning of the crossbar - grid spacing: 100 mm : 400 mm/min machine table: power capacity: 100 kW diameter: 2200 mm Torque: 35700 Nm workpiece weight: 17000 kg Right crossbar support: bit feeder section: 250 x 250 mm Immersion diameter: 340 mm x-travel: +- 1350 mm z-travel: 1500 mm Drilling and milling device: Distance of m.spindle to upper edge of t. table: 62,5 mm power capacity - milling spindle: 37 kW total power requirement: kW weight of the machine ca.: 62,5 t dimensions of the machine ca.: m crossbar adjustable! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC laser cutting Bysprint 3015 Bylaser 2200 used very little, only for prototyping. Working range: X-axis - 3000mm Y-axis - 1500mm Z-axis lift - 70mm Machining accuracy: VDI 3441 machining tolerance ± 0.1 Finding tolerance ± 0.05 Edge detection accuracy: Detection tolerance ± 0.05 Finding tolerance ± 0.2 Load bearing capacity: Interchangeable lifting table 890kg Fixed plate table 3500kg Power supply to the machine: Three-phase, + PE 50/60Hz electrical connection. Machine: cos. 0.91 , 100AT , 4 poles 3x400/480V Air emission filter: cos. 0.8 , 25AT , 4 poles 3x400/480V Cooling water: Water flow rate 95 Water starting temperature 19°C Water temperature constant ± 1 K Impurities

The scope of delivery includes: 01x Folding box / folding box, used Manufacturer: SSI Schaefer Type designation: FK 6220 Material color: blue External dimensions: 600 x 400 x 220 mm (LxWxH) Internal dimensions: 570 x 370 x 215 mm (LxWxH) Dimensions folded: 600 x 400 x 70 mm (LxWxH) Volume: 45 l Weight: 2.44 kg/pcs. Material: Polypropylene Handles: open on the front wall side Side Type: Closed Bottom Finish: Smooth, Closed It is a second-hand item, there may be scratches, dents and traces of use exist. General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery.

Catalog No. : 7281 Type: 2200 Producer: Emba Made in: 1974 Characteristic: In good technical condition.

Ladegeraet - Charger for forklift Jungheinrich E 220 G 24/65 B-ET-DA -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Spiralbindemaschine - Spiral binding machine Gestetner 220 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: iTNC 530 Heidenhain turning speed range - milling: 20 ~ 12.000 U/min power capacity - milling spindle: 35 / 25 kW tool taper: SK 40 tool piece magazine with: 100 pos. table surface area: 2.600 x 600 mm rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 50 m/min rapid traverse Z-axis: 50 m/min max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg max. table load: 2.200 kg total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7,0 x 4,2 x 2,7 m Chip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mm Seperating wall: oil mist extraction: test probe: TS 631 Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 bar Travelling column milling machine DECKEL MAHO - DMF 220 Linear - incl.  ...

More details upon request

Year of construction 2008 Control system Siemens 840 D Rotational diameter. [mm] 2400 Turning length [mm] 2145 General: Year of construction 2008 Control system Siemens 840 D Turning diameter 2,400 mm Rotation height 2,145 mm (stand elevation 900 mm) Machine Table: Technology gear table, 2 stages Drive power 100 kW Torque 39,700 Nm Holding torque milling operation 44,800 Nm Speed 250 rpm Face plate diameter 2,200 mm Table load max. 17,000 kg C-axis 0.001° Drilling and milling equipment: Technology Gear Spindle Speed max. 3,000 rpm Power 37 kW Torque 1,230 Nm Tool holder Capto C8 Crossbar: Vertical travel 1,000 mm Grid spacing 100 mm Distance between milling spindle and table 2,350 mm Support: Travel X-axis +/- 1,350 mm Z-axis travel 1,500 mm Chisel slide cross-section 250 x 250 mm Immersion diameter 340 mm Rotate tool holder Capto C6 Tool Hold ...

Irrigation system, hose reel, older model, in need of repair due to the long service life, hose diameter 65mm, hose length 220m.

cutting and punching machine

Used line for bottling and packaging carbonated drinks in 500ml glass bottles. Bottle capacity on 500 ml 22000 L/h Line composition: 1. Demag hoist, year of production 2009, model EUDC Pro 2-250 2. Simonazzi crate depalletizer, model ROBOT DEPAL, year of production 1994 3. Simonazzi bottle unloader, model DECAMATIC, manufactured in 1994 4. KHS bottle washer, model Omega Kaskana 23/87ES01, year of production 1994 5. Simonazzi crate washer, model LAVACCASSE M-2000, year of production 1994 6. Simonazzi fillinf machine, model EUROSTAR RAA-425, year of production 1994 7. Pama tunnel pasteurizer, model PAMA 484 DR, year of production 1994 8. Krones labeling machine, model PRONTOMATIC 720-21-8-8-110RM, year of production 1994 9. Simonazzi crate packing machine, model INCAMATIC IAB 443, year of production 1994 10. Simonazzi crate palletizer, model KOMBI PAL IBP 254, year of production ...

General SKU334U821 LocationBarneveld MakeKek Kemutec TypeCM 220 No.B 32844 Year of construction11-2006 Main Features MaterialStainless steel Motor4 KW Width220 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia: 220x150mm Sieve sizesDia: 220x180 Sieve perforationDia:3mm (3x) InletDia:145mm Motor4kW, 400Volt, 1425rpm (ex) Speed1425 rpm With extra sievescheck MaterialStainless steel 1.4306 (304L) Information Total height0,75m Weight200kg Floor space1,1x0,53m ATEX compatiblecheck Extra SpecificationsThe product bucket has a diameter of 300 mm and a height of 300 mm. Bucket volume: ±20 liters. Powdered foodsSieve granulatorsKek KemutecIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

General SKU041X302 LocationBarneveld MakeLightnin TypeECL-M5 SK-220 V Year of construction2004 Specified Features - Stirrer Material finishMirror polished Main Features MaterialStainless steel Motor2.2 KW Length2300 mm Stirrers MaterialStainless steel Propellor stirrerSanitary top entry mixer (1x) Flange-stirrerTri-clamp DN200 Shaft length2300mm Sizes stirring headdia. 430mm Number of stirrers on shaft1 Motor2,2 KW, 230/400 Volt Information Extra Specifications- Stirrer has never been used StirrersLightninMixers > StirrersBrand > Lightnin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU289P535 LocationBarneveld MakeAlfa Laval LKM TypeLKH 30/220 SSS Mach.No.30-06657 Main Features MaterialStainless steel Motor11 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps PumpCentrifugal pump Number of pumps:1 Capacitycheck unknown With motor11 kW InletDN65 OutletDN50 Information Year of construction1995 Floorspace0,9x0,6 M Total height0,6 M Weight100 KG Extra SpecificationsCECentrifugal PumpsAlfa LavalPumps > Centrifugal PumpsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU340S632 LocationBarneveld MakeKEK Kemutec Powder Technology (UK) TypeK220 No.07025.220CM.8451 Year of construction1997 Main Features MaterialStainless steel Motor4 KW Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesdia. 200x90mm Sieve sizesdia. 210x120mm Sieve perforationdia. 5mm Inletdia. 145mm Outletdia. 145mm Motor4 kW 400 Volt Information With switchgear(as is) Floor space1,1x0,8 M Total height1,3 M Weight350 KgSieve granulatorsKek KemutecSieves > Sieve granulatorsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU041X301 LocationBarneveld MakeLightnin TypeECL-M5 SK-220V Year of construction2004 Specified Features - Stirrer Material finishMirror polished Main Features MaterialStainless steel Motor2.2 KW Length2300 mm Stirrers Propellor stirrerSanitary top entry mixer (1x) Flange-stirrerTri-clamp DN200 Shaft length2300mm Sizes stirring headdia. 430mm Number of stirrers on shaft1 Motor2,2 KW, 230/400 Volt MaterialStainless steel Information Extra Specifications- Stirrer has never been used StirrersLightninMixers > StirrersBrand > Lightnin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Inv. Num. : 7324 Type: LYNX 220 LSYC Producer: DOOSAN Created: 2014 Parameters: Control system: FANUC Maximum travel length in the X-axis: 205 mm Maximum travel length in the Y-axis: 105 mm Maximum feed rate in the Z-axis: 560 mm Maximum main spindle power: 11 kW Spindle clearance: 76 mm Maximum spindle speed: 4500 1/min Weight: 4000 kg Equipment: Conveyor Bar feeder

NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount

Indramat Power Supply-----Power supply Type CO 1.3-100-220

Complete Genset, 0 hours after M6 maintenace, damaged crancksahft. (new bearings, liners, renewed turbochargers, renewed cylinder head, new main, pilot gas valves. Lot of spare parts available.

CNC Fanuc Oi-TC Rotating diameter on the bench 510 mm Rotating diameter on the carriage 290 mm Maximum turning diameter 250 mm Maximum turning length 510 mm Turning diameter from bar 51mm X-axis travel 175 mm (160 + 15) Z axis stroke 550 mm Spindle speed Rpm 6000 Spindle motor 12 kW ASA A2#5 spindle connection Spindle hole Mm 53 Turret N 24 stations Hours of work No. 6323 MT4 tailstocking Dimensions Mm 2630 x 1670x 1650 Weight Kg 4000 Complete with: User manuals CE certification

KRRASS QF28 Y - 4 x 220 - available  Features 380 V power supply Model: 4x200 / 6x220 (on request) Max. plate thickness : Cs = 0.5 - 4.0 / 0.5 - 6.0 Ss = 0.5 - 2.0 / 0.5 - 3.0 Max. plate length: 200mm / 220mm 40-135° / 30-140° cutting angle RPM >35 / >30 Worktable length: 850mm / 850mm Motor power: 3kW / 4kW Machine dimensions: 890x870x1080mm / 950x920x1150mm Weight: 860 kg / 970 kg

SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie rods: 510 X 510 mm Tray dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Material pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage Weight: 8100 kg Dimensions: 6.13 x 2.08 x 1.59 m

Control type: NC 5 Number of hours: 27,000 hours Closing Closing force: 350 T Opening stroke: 700 mm Between columns: 760 x 710 mm Tray dimensions: 1070 X 1015 mm Mini/maxi mold: 400/670mm Max distance between trays: 1370 mm Injection: Screw diameter: 60 mm Screw length: 20 D cm3: 2366 Bars: 890 General: Motor power: 55 kW Heating power: 23.1 kW Closing weight: 18 T Injection weight: Dimensions length: 6.5 m Width dimensions: 1.8 m Dimensions height: 2.3m Options: Cores: hydraulic predisposition 2 cores Robot interface: E67 Bi metal: YES Others: 4 blow guns, 2 Kisler mold pressure ports, laminar flow, 8 hot runners

Key data: 400 kN, 17 g/PS, 18 mm

Arburg 270S-400-70 (220) General information SKU: (220) Availability: In stock CTFZQ29N Year of construction: 2008 Brand: Arburg Specifications Injection weight: 17 g Clamping force: 400 kN Stand: Used Screw diameter: 18 mm Injection pressure: 2500 bar Tie bar spacing: 270 x 270 mm Clamping plate size: 385 x 385 mm Tool installation height min.: 225 mm Control: Selogica Language: English,Swedish Power: 16.4 kW Weight: 2040 kg Dimensions: 1.3 x 3.1 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes

Hydraulic press brake: AMADA type HFB-O 2206, rb: 2000, a very durable model from the best manufacturer of this type of machines Operateur OPE II control - 8 controlled axes, visualization, Polish language Tools - a set of new tools - 4-slot die + punch, new adapters with clamps, Amada standard segment tools.

Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] 300/650 Maximum opening width [mm] 1050 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 322 Injection pressure [bar] 2080 Electrical and hydraulic equipment Rated power of the pump motor [kW] 37 Heater power [kW] 16.8 Dimensions and weight Net weight with control cabinet [t] 8.5 Dimensions (length x width x height) [m] 5.43m x 1.88m x 2.2m Additional equipment: 2 x Conveyor belt Safety cage Wittmann W621-1449 robot (X=590mm, Y=1200mm, Z=2500mm)

Arburg 570C 2200-1300 Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 664 Injection weight [g] 558 Injection pressure [bar] 2000 Dimensions and weight Net weight with control cabinet [t] 9.3 Dimensions (length x width x height) [m] 6.16x1.91x2.39 m Additional equipment: Hybrid machine: fast, energy-saving Euromap 67 Hydraulic core extraction x 2 Injection system - bimetal Main motor of the machine - servo motor driven by inverter - energy saving

Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 664 Injection weight [g] 558 Injection pressure [bar] 2000 Dimensions and weight Net weight with control cabinet [t] 9.3 Dimensions (length x width x height) [m] 6.16x1.91x2.39 m

The machine is in good technical condition, it is possible to test it by agreement. Control system: DOOSAN FANUC-i Total hours: 8205 hours Maximum turning length: 510 mm Max. turning diameter: 300 mm Turning diameter above the bed (max): 600 mm Turning diameter over the transverse slide (max): 400 mm Controlled axes: X/Z/Y/C1/C2/B Maximum travel length in the X axis: 205 mm Maximum feed rate in Z axis: 560 mm Y axis: 105 mm C1/C2 axis: 360 Maximum power of main spindle: 15 kW Spindle drilling diameter: 76 mm Minimum speed of main spindle: 45 1/min Maximum speed of spindle: 4500 1/min Weight workpiece: 300 kg Maximum travel length in B axis: 560 mm Max. bar material passage: 65 mm Length: 2880 mm Width: 1710 mm Height: 1920 mm Weight: 4200 kg Equipment: Bar feeder SS 2500 Chip conveyor