key technology used for sale

bore capacity in steel (diameter): 32,0 mm throat: 230 mm bore stroke: 120 mm morse taper: 3 MK table:: 400x320 mm turning speeds: 105 - 1725 U/min total power requirement: 1,2 kW weight: 245 kg range L-W-H: 470x810x1710 mm Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover The data for this ad w ...

bore capacity in steel (diameter): 25,0 mm throat: 255 mm bore stroke: 120 mm morse taper: 3 MK turning speeds: 105 - 2900 U/min voltage: 400 / 50 Hz V table:: 395 x 420 mm column diameter: 100 mm weight: 148 kg Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M12 mm : 400 U/min. : 28 Nm air pressure: 6 - 8 bar working area: 150 - 1900 mm weight of the machine ca.: 12 kg Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable. 6 pcs. Keyless chuck with clutch. optional: Working table with T-slots: 750x600x650mm 990x700x800mm or. Magnetic base. Available up to max. M16, M22 and M33. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,26 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund workstation incl. 2 drawers + tool set B high quality steel S355J2 + N, plasma nitrided and BAR-coated Boreholes Ø 22 mm, boreholes surface 100x100 mm grid Material thickness approx. 17 - 19 mm Consisting of: 1x 004002 (Siegmund Workstation) 1x 224004.P (perforated plate) 1x 224030 (clamp holder) 1x 004020 (shelf) 1x 224035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 220610.1 (clamp) 8x 220511 (double quick release bolts without groove) 6x 220410.N (stop) 2x 220110.N (angle) 1x 220852 (Allen key) 1x 004303 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Approx. 100 pcs. gratings 2247 x 995 mm Used goods, very good condition, see pictures Length 2247 mm Width 995 mm Support bar height 20 mm Load bar thickness 6 mm Mesh size 3 x 3 cm Galvanized Negotiation price: € 69,-- net per piece ex stock Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions  ...

width: 900 mm depth: 450 mm height: 1800 mm weight: 0,152 t All drawers are equipped with massive ball bearing guides. All drawers are equipped with 2 x 2 ball bearing guides. All cabinets and drawers are equipped with a lock with 2 keys. All doors are equipped with magnetic locks. The large cabinets are equipped with 3 shelves. (Height-adjustable) The small cabinets are equipped with 1 plan. (Height-adjustable) Powder-coated wear-resistant surface. Punch signs for hanging tools. Equipped with 16 adjustable feet. Overall dimensions 267 x 230 x 46 cm. (Width x height x depth) Dimensions of the 2 large cabinets with door 66.5 x 181 x 46 cm. Dimensions of the 3 small cabinets with door 66.5 x 76 x 46 cm. Dimensions of the cabinet with drawers 66.5 x 76 x 46 cm. Internal dimensions of the drawers 57 x 37 x 22 cm. Dimensions of the wooden worktop 143 x 46 x 3 cm. Dimensions of the tool shelf  ...

3 MONTHS LA-POSTPRESS WARRANTY Excluding electronics Offer consists of: - Single clamp perfect binder BQ-270 Horizon BQ-270 Single clamp perfect binders - Brackets: 1 - Spine gluing: Hotmelt - Side gluing: Hotmelt - Book block thickness: integrated measuring station (outside the pliers) - Milling machine: with suction - Milling depth: adjustable - Envelope feeder: suction drum feeder with 4-fold creasing - Technology: Touch & Work - Job memory: 200 memory slots for repeat jobs - Paper size: max: 320 x 310 mm; min: 135 x 115 mm - Envelope format: 660 x 320mm; min. 240 x 135mm - Book thickness: max. 50mm; min. 1mm - Turnover: 90 - 300 g/sqm - Handling stack height : max. 70mm - Power: max. 500 cycles/h - Dimensions: 2.720 x 910 x 1.545mm - Current: 400V/ 50Hz - 2.7kW - Weight: 900kg On request, we can organize the following points for ...

max. wheel diameter: 400 mm gear width: 500 mm max. module: 15 min. module: 0,5 total power requirement: 2,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 1 ...

Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until the last minute 02/2022 Modern AE immunoassay technology Meet clinical requirements with acridinium ester (AE) technology, which ensures the necessary flexibility and sensitivity for new and innovative assays. Comprehensive diagnostic clarification of various clinical pictures thanks to a test menu with over 70 different assays. Simplified inventory management and lower costs by using the same ready-to-use reagents on all ADVIA Centaur analysis systems. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded during operation. Easier training and operation thanks to an intuitive, icon-based user interface. Fewer operator intervention because daily maintenance is low and the system does not need to be cleaned monthly or booted  ...

Ecat ovo compact EG10 In-Ovo vaccination system For modern hatcheries, the Egginject® Compact enables safe in-ovo vaccination thanks to its dual-pressure injection system. The Egginject Dual Pressure Injection System is a patented technology that allows the injection depth to be individually adapted to each individual embryo, regardless of size and age. Compact Egginect allows vaccination in small and medium-sized hatcheries - Adaptable to all types of incubation trays - Reliable and solid design for heavy use - Easy to use: simple and servant-friendly. - Stand alone or fully integrated into the Hatchery Automation Line. Year of construction: 2013 Item condition: used

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

Semi-automatic metal band saw Capacity round: 330 mm - Horizontal powerful band saw machine, ideal for regular intensive use on harder metals such as iron and steel - Two-way miter cut (from 0° to 60° left and 45° right) - Infinitely variable belt speed due to INVERTER from 20 to 105 m/min - Hydraulic vice - Replaceable work table - Cast iron saw frame on double cone bearings and ring nut for more stability - Precision band saw guide with carbide pads, bearings and corrosion protection - Limit switch for adjusting the saw frame return directly above the material to be cut - Automation is controlled by a safety relay - Low work table for easier loading of heavy materials - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for fast movements and mounted on a rail to allow lateral displacement - Control is via a mob ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

Impact machine Rego Model: SM 4 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whisk 1 new whisk 1 40 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 2 kW,16A-CEE plug Dimensions: 720 x 680 x 1710 mm, WxDxH Weight approx. 285 kg. Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner Visit our large stock of agitators!

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

Stirring machine Rego Model: SM 4 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whisk 1 new whisk 1 40 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 2 kW,16A-CEE plug Dimensions: 720 x 680 x 1710 mm, WxDxH Weight approx. 285 kg. Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner Large selection of impact machines!

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

DIRECTLY FROM THE PRINT SHOP Offer consists of: - Single clamp perfect binder BQ-280 PUR - 2kg drum melt from SM-Klebetechnik Horizon BQ-280 PUR Single clamp perfect binders - Brackets: 1 - Spine gluing: PUR - Glue filling: by barrel melting - Side gluing: Hotmelt - Book block thickness: integrated measuring station (outside the pliers) - Milling machine: with suction - Milling depth: adjustable - Envelope feeder: suction drum feeder with 4-fold creasing - Technology: Touch & Work - Job memory: 200 memory slots for repeat jobs - Paper size: max: 385 x 320 mm; min: 135 x 105 mm - Envelope format: 660 x 385mm; min. 225 x 135mm - Book thickness: max. 50mm; min. 1mm - Turnover: 80 - 350 g/sqm - Envelope stack height: max. 70mm - Power: max. 500 cycles/h - Dimensions: 3.055 x 905 x 1.520mm - Current: 400V/ 50Hz - 2.7kW - Weight: 900kg O ...

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With s ...

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m : : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp. The data for this ad was  ...

Denios steel drip pan 200 liters Can be driven under with grate Used goods, good condition, see pictures Particularly compact, space-saving design Welded steel construction - safe & durable Corrosion protection through high-quality powder coating in gentian blue (RAL 5010) With optimized foot construction for internal transport Removable hot-dip galvanized gratings as adjusting plane SPECIFICATIONS Collection volume (l) 205 Storage capacity barrels of 200 litres each: 2 Grating galvanized Version can be driven under Material steel Outer width (mm) 1236 Deep outside (mm) 815 Height outside (mm) 355 Surface powder-coated Color blue Total payload (kg) 800 Weight (kg) 64 50 pieces available Negotiation price: € 250,-- net per pcs ex stock Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible a ...

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,200 mm Total width incl. motor: : 660 mm Total width without motor: : 500 mm Belt width: 400 mm Strap type: lentsrillen/ black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of ...

The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. Dimensions: D = 2.50 m - L = approx. 10.70 m On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ventilation of the suction line), - 1 pc anti-vortex plate mounted on suction line, - 1 pc sign "Extinguishing water extraction point", - 1 pc vent pipe DN100 with hood, - 1 pc bearing tube with dipstick for measuring the level, - 1 pc dome lid with screws an ...

Cobot collaborative robot Dobot CR10 new - with Safeskin Reach: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, gr ...

The container can be used as a water tank, extinguishing water tank, extinguishing water tank, extinguishing water retention tank, rain retention tank, retention tank, retention tank, rainwater retention, rain storage tank, retention ecister, cistern, etc. Dimensions: D = 2.50 m - L = approx. 8.70 m The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ven ...

Cobot collaborative robot Dobot CR5 new - with Safeskin Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grind ...

3 MONTHS LA-POSTPRESS WARRANTY Excluding electronics Offer consists of: - Gathering tower VAC-100a Horizon VAC-100a Suction air gathering machines - Technology: Touch & Work - Model: Suction and blow air collection tower - Number of stations: 10 per gathering tower - Error prevention: incorrect, double-blade and jam control - Job memory: 9 memory locations for repeat jobs - Expandability: up to 6 towers (60 stations) Programs: - Double cycle (non-stop operation) - Shooting (1x and 2x) - Brochure program - Block program - selective collection - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Output: up to 9,500 sets/h - Electricity: 230V/50Hz - 1,86kW - Dimensions: 842x652x1.961mm - Weight: 310kg On request, we can organize the following points for you: Packaging, loading, transport (by ...

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001

Key data: 520 , 7

Holzkraft SCM thickness planer S 52ES Product name: Thickness planer Model: S 52ES Type: SP-03 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: KK00019806 Year of construction: 2021 Condition: as good as new technical details: - Work table size: 850 x 520 mm - Useful width: 520 mm - max. chip removal per operation: 5 mm - Knife shaft diameter: 120 mm - Number of knives: 30x3x520 / 4 pieces - Knife shaft speed: 5,200 rpm - Holding time knife shaft: less than 10 sec - Feed speed during thickness planing: 5 - 8 - 12 - 18 m/min - Diameter of the extraction hood (plastic): 120 mm - required speed of the extraction air: dry chips = 20 m/sec, wet chips = 28 m/sec - Consumption of extraction air [diameter 120 mm]: 814 m³/h dry chips, 1,140 m³/h wet chips workpiece height: 240 mm workpiece width: 520 mm - min. workpiece height: 3.0 mm - min. workpiece length:  ...

Description Conversion kit high-speed cutter Wohlenberg from Monitor Tube chassis system 85/86/90 to LCD chassis The following steps are necessary for the conversion to LCD: 1. Disassemble the monitor chassis 2. Remove the picture tube and circuit board (ventilate the tube properly, dispose of) 3. Function keys, alpha keyboard is retained (if available) 4. New LCD chassis, loosen nuts and lift the frame 5. Insert chassis from behind, attach front bezel and screw it in place 6. AMP connector from the CPU unplug, eject contacts 7. Set the voltage on the potentiometer to 12 volts 8. Press in new pins after enclosed pin assignment 9. For System 86/90, pinch off the crimp contacts and insert them into the pin header 10.AMP connector System 85 / Plug in pin header on System 86 11.For System 86/90, tap the voltage on the switching power supply (snap terminals) 12.Settings of the LCD monitor are ...

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...

PREPROOFER 770 (Printers 2x Epson Stylus Pro 7700) (Plotters are stacked & linked together for 2-sided printing) Supported resolutions (DPI): 360x720, 720x720. You can choose between unidirectional and bidirectional printing. Printing methods: inkjet, drop on demand, piezo technology Printers used: 2x Epson Stylus Pro 7700 Printer control: Ethernet interface integrated Operating system: Microsoft Windows 7 Professional or Ultimate Repeatability: +/- 1 mm Job size: Max. print width 61 cm' Print speed: Up to 17 m2 printed on both sides per hour at 720 x 360 DPI resolution up to 12 m2 printed on both sides at 720 x 720 DPI resolution PC interfaces: Ethernet Paper: Various papers 58 cm/23" wide // for Preproofer 770: 109 cm/43" wide Equipment / additional information: Available materials: • 3 rolls of paper • 1 maintenance tank • 6 ink cartridges

table length: 500 mm table width: 350 mm ampere: 65 A Control: AGIEVISION 5 CNC total power requirement: 20 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire  ...

MOSCA RO-TR-P-5 Strapping Machine A fully automatic MOSCA strapping machine type RO-TR-P-5. The machine is in very good condition. The original price was about 18,500 € Technical details: Heating wedge welding system with electronic heating regulation Fully automatic belt threading Drive of the unit in DC technology with wear-free direct drives Tape End Query with Tape Jam Throw Automatic belt ring ejection in case of incorrect triggering Belt coil quick-change system Wear-free, force-controlled belt guidance Integration into any processing line possible Hinged transport systems with frequency control PLC control Control panel for setting the operating modes, switching distances, strip tension Potential-free contacts to upstream and downstream systems Automatic PP straps width 5,6,7,8,9 or 12mm Data sheet & machine map under these links

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

Properties: Used trusses of the Manufacturer Bito Colours: blue Specifications Trusses: Quantity: approx. 126 pieces Truss length: 2,080 mm Support length: 1.990mm Truss height: 150 mm Truss width: 50 mm Compartment load: up to approx. 2,000 kg (with distributed load) Pallet racks, heavy duty racks, high racks Pallet racks, also known as heavy-duty racks or high racks, are used to accommodate large loads and thus enable the efficient use of existing storage capacity. In addition, they have a long service life, which makes them an investment for the future of the company. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide variety of industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry. Together we will develop way ...

: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm weight: 470 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely v ...

1x Wolf vertical flow wrapping machines without scale (YOC, 2009), equipped with 2 formats (shoulder and tube) for film widths of 400mm and 275mm. Further equipment : a labeller (from MR Etikettentechnik) and Thermo Transfer Printer (from Valentin) belt drive with vacuum (vacuum pumps also included). with all associated manuals and operating instructions in good working condition. Siemens S7 controlled, plus spare parts. For further photos, videos, information or viewing appointments (machine still in daily use until January 2022), you are welcome to contact us by phone or in writing. Prior sale reserved. Keywords: Coffee, Production, Industry, Food, Pads, Nuts, Pet Food, Pasta, Instant, Granules, Wine Gum, Rice, Confectionery, Chocolate, Cheese, Bars, Pasta, Cereals, Cosmetics, Pharmaceuticals, Powder, Bulk Goods, General Cargo, Capsules, Tea, Drugstore search terms: coffee, p ...

Grease melting tank, double-walled stirring tank, rühwerk tank, coolable, heated used Manufacturer: KLARMANN Edelstahverarbeitung Type: Fat melting tank Year of construction 2017 Stainless steel 1.4404 / 1.4301 Total volume: 610 liters Working volume: 500 liters Diameter inside / outside approx. 1000 / 1100 mm Design temperature product rough/jacket space: 100/150°C Operating temperature: Product room: 90°C Design pressure jacket space: 5 bar Heating/cooling surface: bottom and 2/3 of the frame designed as templates Outlet height approx. 800 mm Calculated melting capacity for butter 20 - 30 min for 300 kg of block goods, depending on the output temp. and product size Compact agitator Planetroll 0.37 kW 77 rpm 400 V IP55 Dimensions approx. 1165 x 1165 x 2260 mm Original price approx. 18000,- € The staircase is not included The plant comes from a plant  ...

Properties: Used trusses with angle of the Manufacturer Bito Colours: blue Specifications Trusses: Quantity: approx. 27 pieces Truss length: 2,080 mm Support length: 1.990mm Truss height: 120 mm Truss width: 80 mm Compartment load: up to approx. 2,000 kg (with distributed load) Pallet racks, heavy duty racks, high racks Pallet racks, also known as heavy-duty racks or high racks, are used to accommodate large loads and thus enable the efficient use of existing storage capacity. In addition, they have a long service life, which makes them an investment for the future of the company. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide variety of industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry. Together we will d ...

Semi-automatic dough dividing and wiring machine, Bread roll press Model: Divobun 3-30 sophisticated technology ... already proven many times! Stainless steel knife with easy cleaning position! with 3 active plates Sub-range 25 to 80 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH Demonstration machine / new machine with warranty

Properties: Used trusses of the Manufacturer Shepherd Colours: blue Specifications Trusses: Quantity: approx. 14 pieces Compartment load: up to approx. 2,000 kg (with distributed load) Pallet racks, heavy duty racks, high racks Pallet racks, also known as heavy-duty racks or high racks, are used to accommodate large loads and thus enable the efficient use of existing storage capacity. In addition, they have a long service life, which makes them an investment for the future of the company. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide variety of industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry. Together we will develop ways to optimize your process and material flow cost-effectively and sustainably. We can ev ...

Semi-automatic dough dividing and wiring machine, Bread roll press Model: Divobun 4-30 sophisticated technology ... already proven many times! Stainless steel knife with easy cleaning position! with 3 active plates Sub-range 40 to 120 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH Demonstration machine / new machine with warranty

properties: Used telescopic belt conveyor Condition: fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. feet Incl. control cabinet 4 pieces in stock Price per piece specifications: Manufacturer: Van der Lande Year of construction: 2013 Model: TTB-800- 4x16 Total length retracted: 5,550 mm Total length extended: 16.000mm Total width: 1.500mm (incl. control cabinet) Width: 1.220mm Belt width: 800mm Condition: good (used) Strap Type: Smooth / Black Conveying height: 1.100mm Net weight: 2.200mm Incl. rear counterweights. Two speed levels adjustable. Telescopic belt conveyors The telescopic belt conveyor is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the telescopic belt conveyor can convey sensitive containers, ...

Safetech ST-Alarm-V2 Safety Weighing Cabin The latest generation of safety weighing cabins, the ST1 series, stands out characterized by an optimized design, especially with regard to personal protection for Working with toxic and active substances. All cabins are equipped with an alarm system and two alarm sensors. The sensors measure the flow velocity on the right and left side of the working opening. As soon as the flow velocity falls below a limit value, both an audible and a visual alarm are triggered. The key advantages at a glance: Unique directional airflow guidance through BAFFLE technology (patent pending) Virtually turbulence-free balance environment Suitable for the latest generation of microbalances Cabin design also enables pipette handling Alarm system with two sensors and data recording Vibration-free due to independent filter unit Easy to cle ...

PRASMATIC MSW 300 C packaging machine was built in Italy in 2012. The packaging machine is used for the automatic shrink-wrapping of products such as bottles or cans in packs of 6-9 pieces. High production efficiency is ensured by the use of state-of-the-art technology to optimise the packaging cycle, such as the cold film cutting system via a rotating blade and the unwinding and winding speed control function via brushless motors to correctly feed the film. The shrink wrapping machine has very low mileage – it was used for only two months of the year. Technical specifications of the PRASMATIC MSW 300C packaging machine - packaging speed: 35 packs/min - average size changeover time: 10 – 25 min - maximum reel diameter: 500 mm - maximum reel width: 680 mm - maximum reel weight: 80 kg - brushless motors - control panel with touch screen - rated current: 65 A - power supp ...

MBM Commercial Kitchen Technology Germany Flake ice machine MBM Type: ICE 350 IS Stainless steel cladding Coolant: R404a Year of construction 2003 0,800kg Water supply Water drainage With switch box for switching on and off Height: 190cm Width: 125cm Depth: 90cm

Key Specs Gross Mechanical Output 532-678 kWm Typical Electrical Output 591-750 kVA (473-600 kWe) Emissions EU Stage II/U.S. EPA Tier 2 2806C-E18TAG | Perkins