juli jungheinrich used for sale

Drum grab, hot-dip galvanized JUNGHEINRICH load capacity: 1600 kg for holding one or two rolling tyres or Beading drums or plastic L-ring drums fork spacing: 540 mm fork cross-section: 150 x 65 mm used, tested ! Dimensions: 1300 x 960 x 930 mm

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 003 H750 -Voltage: 24V/335Hz -Dimensions: 120/90/H75 mm -Weight: 0.3 kg

Hydraulic pump with engine JUNGHEINRICH Hydraulic pump: REXROTH PGF-22/016LN20VM-A370 00929974 Engine: JUNGHEINRICH Type P13-01/6817614 7,7,2 kW 1460 rpm 48 V DC spare part for JUNGHEINRICH ETV A 13,5 GE !, among others used, tested ! Dimensions: 550 x 300 x 270 mm

Boom with roller mount, for attachment to electric drawbar stacker PURTEC type LAM Load capacity: 250 kg Roll holder 700 x 290 x 300 mm Roller diameter max. approx. Ø 400mm Roll holder ± 90° swivel, 20° tiltable Boom length: 900 - 1050 mm Boom ± 30° swivel was installed on JUNGHEINRICH EJC 110 pallet stacker See also S1716, S1719, S1735, KZ85 ! used, tested ! Dimensions: 1400 x 760 x 480 mm

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 012 H750 -Voltage: 24V/335Hz -Dimensions: 115/90/H60 mm -Weight: 0.3 kg

1x Jungheinrich reach truck, condition: fully functional, the truck was checked and serviced annually and repaired if necessary - from a food wholesale warehouse fleet with its own maintenance workshop. Incl. charger! Price gross incl. VAT! Shipping possible for an extra charge. - Manufacturer: Jungheinrich - Type: ETV 214 - Reach truck - Drive type: Electric - Load capacity: 1400kg - Lifting height: 5300 mm - Load centre of gravity: 600 mm - Fork length: 1150 mm - Height: 2300mm - Year of construction: 2014 - Hours: 13225 - Battery from 01/2020 - with full free lift, load protection grille & side shifter. Also available as a cold store version! Several identical devices with a lifting height of 5.3m are also available. Miscellaneous Years of construction and operating hours available - just inquire!

Carrier plate, mounting kit for boom with roller holder PURTEC Type LAM Roll diameter: Ø 47 / 71 mm was installed on JUNGHEINRICH EJC 110 pallet stacker ! See also S1716, S1719, S1735, KZ84 ! used, tested ! Dimensions: 670 x 620 x 160 mm

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Technical data for the footplate: Manufacturer: Jung Heinrich Type: MPB suitable for frame profile: STL ́B'30 (120x92.5x2.5mm) The scope of delivery includes: 01x Foot flap, new Material colour: sendzimir galvanized Material thickness: 12 mm Total width: 218 mm Total depth: 140 mm Number of drill holes: 6 pieces Ø drill hole: 15 mm Weight: approx. 3.24 kg | Pcs. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Hot air axial fan, axial duct fan ASTO, JULIUS SÖHNLE AH03 450 0,77 m3/s up to 600°C (engine thermal, insulated with cooling air from outside) Speed: 1375 rpm Motor : 0.25 kW 380 / 660 V Inner diameter: Ø 450 mm New ! Dimensions: 500 x 600 x 520 mm

E Parts Price refers to the hydraulic pump

Jockey wheel, 2 pieces PURTEC type LAM wheel diameter: Ø 125 mm wheel width: 40 mm flange: 135 x 100 mm 4 x slotted holes Ø 8 x 32 mm was installed on JUNGHEINRICH EJC 110 pallet stacker ! See also S1719, S1735, KZ84, KZ85 ! used, checked ! Dimensions(single wheel): 220 x 140 x 125 mm Dimensions(packed): 380 x 130 x 150 mm

Protective edge, 2 pieces PURTEC Type LAM 740 x 55 x 150 mm was installed on JUNGHEINRICH EJC 110 pallet stacker ! See also S1716, S1735, KZ84, KZ85 ! used, tested ! Dimensions: 740 x 110 x 150 mm

Manufacturer: Jungheinrich, Type: Hubwagen, Fork length in mm: 1200, Lifting power kg: ca 2000,

150 m pallet rack Jungheinrich type MPB Used goods very good condition, see pictures Height 3.9 m Depth 110 cm, blue Load 8.4 tons Beam length 2.7 m yellow Carrier with ballast /compartment 2400 kg Negotiation price: € 8.990,-- net from stock Offer consists of: + 52 pcs. frame pre-assembled, depth 110 cm, height 3.9 m +204 pcs. beam, length 2.8 m, 2400 kg ballast/compartment +408 pcs. Suspension locks +208 pcs Concrete Anchor Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale ...

Forklift front forklift in very good condition Manufacturer: Jungheinrich Year of construction: 2011 Load capacity 3.000kg Operating hours approx. 4,200 hours Triplex mast with full free lift Lifting height approx. 5m Three valves up to the mast Side shift Weight approx. 4.73 tons Construction height approx. 2250mm Total width approx. 1,300mm Turning radius approx. 2.37mm All information is provided to the best of our knowledge, but without guarantee! Year of construction: unknown

Manufacturer: Jungheinrich, Type: MP, Year: 1994, 1stupright frame pieces Qty.: 10, 1stheight mm depth mm: 4000 / 700, 1.Transverse beam Qty.: 18, 1.Transverse beam length mm: 3900, 2.Transverse beam Qty.: 4, 2.Transverse beam length mm: 1900, Compartment load in kg: 1997, Year :1994

Jungheinrich Beautiful truck with few hours. 627 hour Battery could be better. Complete with battery charger. Photos speak for themselves. Directly available

Manufacturer: unbekannt, Pallet high-bay store: yes, 1stheight mm depth mm: 3200/1050/8 Stück, 2ndheight mm depth mm: 2800/1050/45 Stück<CRLF>3600/1050/4 Stück<CRLF>, 1.Transverse beam Qty.: 93 ohne Haken<CRLF>122 mit Haken, 1.Transverse beam length mm: 2700, Compartment load in kg: 2000, Span length mm: 2700, FREE TEXT: Stückpreis Aufrechtes Rahmenteil 40 Euro/Querriegel 17,50 Euro zzgl Mwst.,

Sell very long hand pallet truck / lifting forks 2500540mm Q max450kg

Cardboard strapping – used- : Price per piece ex site: 595.-€ (net)! Manufacturer: unknown Model No.: TP-202CE Machine number: A72796 Power: 7A, 230V/50, Phases: 1 Year of construction: 08/2018 Weight: 85kg Original price: according to the Jungheinrich shop approx. 1.400.-€ Condition: good Available: now Location: Wenkbach

Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Jungheinrich electric forklift -2x drives -Filter Control valve -Hydraulic tank: 930/400 / H360 mm -Dimensions: 1000/400 / H800 mm -Weight: 288 kg

Load: 1t, documentation available.

Length: 15,000mm, width: 7500mm, height: 7000mm, load: 100-600kg, max. load per level: 3,6t, max. number of pallets per level: 6, machine was not used.

Load: 1t, operational hours counter: 3170h.

Including battery charger.

Nominal load: 1.3t, drive power: 0.6kW, length: 1585mm, width: 650mm, weight: 179kg.