inserting used for sale

Merz KT160 semi-automatic packing line for packing sticks into pre-folded cartons , 2 lanes (previously the Merz was fed by two 1-lane stickpack machines), inserting of the sticks using 2 Stäubli robots (1 robot per lane), suitable for sticks with a width of 15 to 25 mm and a length of 60 to 100 mm, maximum possible carton size (pre-folded) 115 x 125 mm (WxL), count of 35 to 100 sticks per carton possible, capacity up to 63 sticks per minute, electrics 400V/50Hz/3.5kW, compressed air 6 bar, Siemens SIMATIC Touch Panel

Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg

The Glatt Multipan-Coater (GMPC) is designed specifically for research and development for coating tablets with aqueous or organic solvent solutions. As an option, it is also possible to coat cores with sugar syrup. For the pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing sectors. Once the system has been filled with tablets, heat is used in the application of aqueous coating solutions or dispersions. The tablets are then dried with treated air. Pan rotation enables a homogenous, coating layer by a permanent mixing movement of the product. The interchangeable Pan, respectively with a diameter of 440 mm and 750 mm. Each Pan has its own trolley on which it can be stored when not in use. For the purpose of inserting the pan into the coater, the trolley is equipped with a system of guide rails. Technical data: Length mm 2200 Width mm 1660 Heig ...

PEMSERTER SERIES 4 rivet / fastener inserter press. (6t) In operation Equipped with a pneumatic system that allows it to exert a force of up to 53.4 kN (6t) and has a throat depth of 457mm, enabling it to work with a wide variety of chassis configurations. Designed for inserting self-clinching inserts from M2 to M10 in steel and up to M12 in aluminum. Features: – Adjustable insertion force from 1.8 to 53.4 kN / 400 to 12,000 lbs. – Pneumatic system enables high insertion speed and simplifies operation. – Requires only compressed air. – Integral point of operation safety. – Quick and easy change of tooling, suitable for short productions. – Air supply pressure of 6 to 7 BAR. A manually operated machine in production that allows the placement of various inserts, nuts, bolts, spacers, positioners, etc. Option to install Revolee Qx.

• Palletizer ZECCHETTI – 25.000 bph: • Year: 1993 • Producer: ZECCHETTI • Speed (BPH): 25.000 bph • Speed: 2.100 c/h - 12.500 bph on boxes of 6 bottles - 25.000 bph on boxes of 12 bottles. • 30 meters of tapes. • Possibility of work with 3 different pallets. • Multiple pallet stores. • Interlayer pad inserting. • Transport of products and pallets included. • Rotary pallet wrapper Siat included. • Safety protections. • Code R 22

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

Semi-automatic Insert & Seal machine for inserting and fixing molecular sieves/getters, electrodes, sections, inlays etc. into thin tubes from 2mm diameter and up to 120cm in length

Folding carton boarding machine Uhlmann C 100 LB • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Product feed for blister via blister stack shaft • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding carton code, 1x brochure absence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color Tuach Panel - Code reader Cognex - Validation documentation

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230V, noise level:

DESCRIPTION: • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Centrally adjustable cup chain • Product feed for blister via blister stack shaft • Monitoring of packaged goods height in cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with anti-ejection control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230 V, noise level:

Hives inserter TMG | double heads Year: 2002 Speed: 2.000 Boxes/h Model: METTIALVEARE Suitable for inserting the hive on cartons with bottles Equipment for 6 and 12 cartons Safety protections

Horizontal cartoning machine for inserting products into folding boxboard including hot glue module for gluing the boxes. Suitable for a variety of products (solid products) such as tubes, bottles, ampoules, vials, blister packs, cosmetic jars, vacuum packed food. A brochure or leaflet can be inserted additionally to the product for e.g. instructions for use, instructions or similar. The fully automatic packaging process includes feeding of the products, erecting of the folding boxes, insertion of the products, insertion of the brochure or leaflet, closing and gluing of the box and out feeding it. Within the range quick change to different carton sizes simply by adjusting the parameters (no format or tray changes necessary). PLC control, touch screen operating monitor (menu available in different languages e.g. English, German etc.). - Specifications: Dimensions of the folding box: L(50- ...

Horizontal cartoning machine for inserting products into folding boxboard. Suitable for a variety of products (solid products) such as tubes, bottles, ampoules, vials, blister packs, cosmetic jars, vacuum packed food. A brochure or leaflet can be inserted additionally to the product for e.g. instructions for use, instructions or similar. The fully automatic packaging process includes feeding of the products, erecting of the folding boxes, insertion of the products, insertion of the brochure or leaflet, closing of the box and out feeding of the box. Within the range quick change to different carton sizes simply by adjusting the parameters (no format or tray changes necessary). PLC control, touch screen operating monitor (menu available in different languages e.g. English, German etc.). - Specifications: Dimensions of the folding box: L(50-200)xW(20-85)xH(15-75)mm | requirement carton/pape ...

Full 16 mm dropper inserting machine, with winder, vibrator, dropper dispenser and double end winder.

Vial labelling & packing line for vaccines, etc. in 2R vials (diameter of 16 +/- 0.25 mm x height of 35 +/- 0.5 mm) and 3 ml. vials (diameter of 16.25 +/- 0.15 mm x height of 35 +/- 0.5 mm) comprising Herma132M HC wrap-around labeller (400/min.), with infeed rotary table suitable for PP-trays with inner dimensions of 428 x 244 x 42 mm (LxWxH), Videojet DataFlex 6530 thermal transfer printer (up to 3 lines each of max. 18 variable alphanumeric characters) for printing the variable data on the labels (expiry date, batch no., etc.) with camera print and code checking, luminescence sensors for checking the presence of the labels with reject system, Siemens IPC 277E 12 color touchscreen, Siemens S7-1500 PLC, vials are leaving the labeller at 90° feeding directly into Uhlmann carton tray opener & closer (15-150 trays/min., tray size min: 30 x10 x 60 mm (WxHxL), max. 100 x 95 x 165 mm (WxHxL)) ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 04x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 02x chipboard second choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 7,500 mm Number of fields per row of shelves: 03 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 04x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 12x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 06x chipboard II choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Su ...

Overview The Bag in Box filler was manufactured in 2009. As the owner has upgraded his filling equipment, this machine is for sale. Technical Specification: Capacity: 600 bags/h at 3l 500 bags/h at 5l 400 bags/h at 10l 200 bags/h at 20l Nitrogen jet system on filling valve Features: Machine is completely made in stainless steel; the supporting frame is composed of a heavy welded tubular and the surface is handled in conformity with a particular treatment where special glass micro-spheres are used (of auto-draining type and washable), particularly suitable for the food processing industry. Adjustable jerk-cutter which is insert in loading position of the bag before filling, to avoid useless mechanical stress. Filling valve complete with mechanical capacity limiting device; it is completely made in AISI 316 stainless steel with seals suitable to be sanitized by steam (with the possibility  ...

Manufacturer: MAW IMA, Type: Frontenbohranlage, Year: 2000, Control: Ferrocontrol, Program: yes, Function: Bohren und Beschläge setzen, Work piece width min-max mm: 300-600, Min.-max. workpiece length in mm: 400-1500, Min.-max. workpiece height in mm: 16-22, Destacking unit: yes, Inlet roller conveyor: Hordenwagen, One or two Spot machine: Stern 4 Platz, Working stations: 4, Dowel driving station: no, Milling spindles horizontal: no, Milling spindles vertical: no, Fitting type: Topfband, Belt drilling stations: yes, Bänder Eindrehstation: yes, Hinges inserting unit: yes, Magazin for hinges!: yes, Set buffer: yes, Dowel driving station: no, Working range X: 1500, Working range Y-axis: 600, Drill gearings: 2, Drilling supprt from bottom: 1 Verstärktes Bohrgetrieb Beschlag/ L Bohrkopf<CRLF>ca.12 spindeln, Drill gearings: 2, Drill support from top: 1 Stück 3 Spindeln, Drill gearing ...

Manufacturer: Priess und Horstmann, Type: BAT III, Year: 1995, Control: Priess und Horstmann, Program: yes, Funktion: Frontenbohrmaschine, Work piece width min-max mm: 150-600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-45, One or two Spot machine: 2, Working stations: 2, Feeding speed max m/min: 80, Fitting type: Blum, Set buffer: yes, Working range X: 21300, Working range Y-axis: 2600, Working range Z: 60, Vertical drills-X: 2, Drill vertical Y: 15, Horizontal drills-X: no, Drill gearings: 3, Drilling supprt from bottom: 2, Drill gearings: 3, Drill support from top: 1, Drill gearings: 3, Hinges inserting unit: yes, Magazin for hinges!: yes, Radial arm machine: yes, Year :1995

Manufacturer: Priess und Horstmann, Type: BAT III-CNC-2, Year: 1996, Control: Priess und Horstmann, Program: yes, Function: Frontenbohrmaschine, Work piece width min-max mm: 100-600, Min.-max. workpiece length in mm: 100-1000, Min.-max. workpiece height in mm: 16-25, Destacking unit: 2, Einlaufrollengang: 2, Dowel driving station: 80, Milling spindles horizontal: Blum, Milling spindles vertical: yes, Fitting type: 21000, Schliesszylinder Bohrstationen: 2600, Schlosskastenfrässtationen: 60, Bänderbohrstationen: 2, Bänder Eindrehstation: 15, Hinges inserting unit: no, Dowel driving station: 3, Working range X: 2, Dowel driving station: 3, Working range Z: 1, Dowel driving station: 3, Drilling support horizontal: yes, Drill gearings: yes, Number of tables: yes, Year :1996

Manufacturer: MAW, Year: ca.1990, One or two Spot machine: 1, Hinges inserting unit: yes, Magazin for hinges!: yes, Working range X: 1500, Working range Y-axis: 300, Number of units: 2, Clamping system: pneumatik, Wight approx. kg: 500, FREE TEXT: Hettich System, Year :ca.1990

• Format range folding box (5 inch) width 15-90, height 12-70, length 50-200 mm • Product length max. 155 mm • Output 20-120 cartons/min, clocked motion, the maximum speed depends on the format and product • Centrally adjustable product chain • Closure double-sided offset or equilateral tuck-in flaps • Leaflet folding and inserting machine from magazine GUK FA21/4, Cartonac 81 • Code reading Laetus Argus 4 (2x brochure, 1x folding box) • Colour embossing unit on both sides • Bad ejection with ejection counter control • Vacuum pump • Electronic cam gear retrofitted • SPS CAM • Various format parts (insertion hopper) • Various spare parts • Electr. connection 400V/50 Hz

• Format range folding box (5 inch) w 15-90, h 12-70, l 50-200 mm • Output 20-120 folding boxes/min, clocked motion, the maximum speed depends on the format and product • Product infeed conveyor CAM 502 H for cylindrical products (diam. 18-67 mm, h 45-150 mm) and rectangular products (w 15-117, h 15-67, l 45-150 mm), equipped for bottles with bottle-transfer chicane and pusher in product chain • Centrally adjustable product chain • Closure double-sided offset or equilateral tuck-in flaps • Leaflet folding and inserting machine from magazine GUK FA21/4, Cartonac 91 • Code reading Argus 6012 (1x brochure, 1x folding box, 1x brochure presence in folding box) • 1 KBA-Metronic hot-stamping unit (without embossing stick), for flap insert side, retrofitted 2018 • Bad ejection • Vacuum generator • HMI/IPC touch panel Siemens Simatic TP700 Comfort, Windows CE 6.0,  ...

Manufacturer: Priess und Horstmann, Type: BAT III CNC, Year: 1994, Control: Priess und Horstmann, Function: 2, Work piece width min-max mm: Topfband, Min.-max. workpiece length in mm: yes, Min.-max. workpiece height in mm: ca.2 X 1250, Destacking unit: 2600, Einlaufrollengang: 60, Dowel driving station: 19, Fitting type: 2, Schliesszylinder Bohrstationen: 1, Fitting type: 2, Bänderbohrstationen: 1, Fitting type: 2, Hinges inserting unit: 2 X9, Dowel driving station: yes, raster table: 2 Stück Puffersetzeinheiten, Year :1994

• Fully automatic horizontal cartoner for both side moved plug-in closure • Operation direction from right to left • Adjusted for feeding of single and double 4-edge sealed bags • 600 mm format wheel and 6 stations • Format area folding box width 15 -125 mm x height 15 - 110 mm x depth 45 - 150 mm according to format parts • Output max. 60 cycles/min, the maximum speed depends on the format and product • Product stacking device • Leaflet folding and inserting device GUK FA21/4 Cartonac 2000 from magazin with separate GUK operating panel • Code reader SysTec TE 2000 with 2x leaflet, 1x folding box, 1x leaflet presence with bad discharge for folding box and leaflet • Without printing device • Available format parts (format cartridges) for folding box dimensions width x height x depth: 87 x 27 x 127 mm 91 x 70 x 127 mm 91 x 110 x 127 mm • Teach-Box operati ...

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Manufacturer: MAW, Year: ca.1990, One or two Spot machine: Einzelplatz, Hinges inserting unit: yes, Magazin for hinges!: yes, Working range X: 1500, Working range Y-axis: 800, Number of units: 1, Clamping system: yes, Wight approx. kg: 400, FREE TEXT: mit Luftkissentisch Anschlagsystem, Year :ca.1990

Groninger plastic bottle filling & closing line for eye drops (Ophthalmic), etc. comprising ZVB 2650 fully automatic empty bottle sorting & feeding unit and DSVG 4132 fully automatic intermittent motion filling, stopper and capping machine with barrier system with laminar flow modules type ORABS with LF Units, working stations: 1. IPC Tara – 2. gassing during filling – 3. 4 filling heads (multi stage filling) with servo controlled peristaltic pumps, filling accuracy +/-0,5 % referred to volumes above 1 ml. and +/-1,0 % referred to volumes below 1 ml. – 4. IPC gross – 5. post-gassing – 6. 2-head dropper inserting station – 7. 2-head screw capping station – 8. Bottle discharge, Allen Bradly Control Logix PLC + Allen Bradley Panel View Plus 6 / 1500 HMI, includes format parts for bottles for 3 ml. (Ø 18,70 x H 28,20 mm) and 10 ml. (Ø 25,00 x H 43,65 mm), capacity up to 120 b ...

• Output approx. 40 cycles/min. • 2 filling hoppers, manual product feeding • 2 vibrating pots • Robot Mitsubishi RH-3SDHR, max. load 3 kg • Vacuum gripper • Product transfer, e.g. into blister cavities of a blister machine, by inserting the product transfer area of a blister machine into the machine. • HMI programme control with touch screen • Drive 220V/50Hz

Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz

⦁ Station No. 1 Charger for cardboard packaging with packaging remover from the charger ⦁ Station No. 2 Box former ⦁ Station No. 3 Station for inserting products ⦁ Station No. 4 System of closing boxes with sticky hot glue ⦁ Station No. 5 Closing the box ⦁ Station No. 6 Exit conveyor -The system of closing the box with hot glue is carried out using the device of the Italian manufacturer "Preo".

Used Shrink Wrapper LP Packaging 2008 Type of machine Automatic shrinkwrapper produced by LP Packaging with multi row in line feeding belt The model is SFE 800V Wrapping method and material Double reel with flat sheet polyethylene shrink film Motorized multi row in line feeding belt and pusher with cross bars with chains Suitable to be inserted in high speed production lines for multipack of several pieces on several rows With or without inserting a layer of flat cardboard and or tray Single or double lane packaging All machine manuals available Accident prevention protections attached It was used to pack fruit juices in glass [...for more information send your inquiry to the seller.] refno: FA41

Used Cardboard Divider Inserters TMG 2002 TMG brand divider inserter Suitable for inserting the hive on cartons with bottles It inserts the hive into two cartons The whole frame is made of painted iron Safety features Equipped for cartons of 6 and 12 Production about 2 000 cartons per hour Year 2002 [...for more information send your inquiry to the seller.] refno: INS04

Machine visible in Italy machining center and pvc cutting, already inserted with salamander profile, possibility of inserting any make and model excellent machine in perfect working order with Italian assistance included On sale due to switching to another model

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas diameter dowels: 6 mm, length of 40 mm. Controlls: Powercontrol PC85 with Woodwop software

Machine for cutting, milling, drilling and dowelling frames or rails, straight or mitre, with or without counter profiles in small batch size or one-off production Workpiece length 160 - 2350 mm. Workpiece width: - 20 - 140 mm for 2 workpieces per field - 20 - 100 mm for 2 workpieces per field at 45 ? - 20 - 300 mm for 1 workpiece per field Workpiece thickness 10 - 30 mm. Angle adjustable between 45 ? and 90 ? Tables can be tilted 25 ? PC controlled on 3 axes Drilling and inserting on point-to-point basis Equipment: Sawing station: saw blade 350 x 30 mm, motor 2.2 kW, 2800 R / min Drilling station: drill bit diameter 10 mm, motor 2 kW Milling station: diameter tool 100 - 200 mm, spindle diameter 40 mm, clamping length 70 mm, motor 3 kW, 6000 - 12000 R / min Dowelling station: dowel dimensions 8 x 30 mm, 8 x 20 mm

• Set up for ALU/PVC-PVDC-ACLAR, 1-lane • Plate forming, roller sealing • Output max. 350 blisters/min, max. 175 cartons/min • Moulding area blister in running direction max. (W x L) 180 x 140 mm • Blister width 30-90 mm • Blister length 60-140 mm • Drawing depth 3-12 mm • Folding carton dimensions (W x L x H) 35-95 x 65-145 x 12-100 mm • Hapa 230-T-1C-LR flexo printing unit, unused • Directional feeder (Sombrero) for tablets / capsules • Brush box feeder for coated tablets and film-coated tablets • Sealing pressure control • Print mark control cover film • Blister embossing station • Blister perforating station • Integrated cooling device • Product inspection with colour camera (1024-800 pixels) and code reading by IMA Antares-Vision system • Code reading Pharma Code, Data Matrix, EAN, etc. for 2x leaflet, leaflet presence, folding carton • Refill  ...

IMA SAFE A83 E horizontal cartoning machine with intermittent movement Machine with solid steel structure, complete with: - Full fairing to protect the operator; - Base frame painted in STEEL IT 1002; - Electrical installation in accordance with EN 60204; - Voltage 400V, 50Hz, 3-Phase, + Neutral + Earth; - Control logic by PC B&R microprocessor - Color touchscreen for programming and visualization Machine status, controlled by a second B&R PC - In-line feed belt, with intermittent movement; equipped with timing belts (absolutely no chains) and with interchangeable step cups, with the possibility of with simultaneous adjustment option, length 2000 mm; - Horizontal conveyor belt for feeding boxes with pre-alarm; - System for detecting the amount of blister packs in the feeder conveyor belt; - Minimum fill level detection in the cardboard magazine; - Group for introducing t ...

Bread slicer, make WABAMA, Model ECONOMY Plus 450, year 2009, Cutting capacity: up to 200 cuts/min, cutting thickness: 4 - 26 mm,, for bread lengths up to max. 450 mm, cross-section: 200 x 150 mm (WxH), Sensor – technology for measuring the panes,, Product holder (multi-tooth gripper), dimensions: 1,130 x 740 x 1,200 mm, use: The machine is versatile and is usually used for the automatic cutting of all soft and hard breads such as: tea and toast breads, multigrain breads, hard-crust double baked breads as well as Christmas stollen and English fruit cake. A fresh bread - cut is usually already possible when warm. Due to the low-noise and vibration-free operation, the machine is ideal for installation in shop fittings., construction/ function: The WABÄMA bread slicer has an extremely stable and resilient construction completely in V2A Nirosta stainless steel. The machine is equipped wit ...

Semi-automatic drilling device for plastic parts This purely pneumatic drilling device is designed for repeatable drilling of small plastic parts up to approx. 40 x 200 x 40 mm with holes up to 3 mm. Specifications: - Linear axis travel 420 mm - Stroke approx. 30 mm - Height adjustment approx. 100 mm - With 2-hand release - Plexiglass protection on 3 sides - Emergency stop switch - Sturdy, mobile frame made of aluminium profiles - With 4 swivel castors, 2 of them with brakes - Overall dimensions approx. 1000 x 1000 x 1700 mm - Weight approx. 50 kg - With collet for drill bit 1.5 mm Expiration: - Setup: Adjust stop angle to part size - Setup: Alignment of cross table in X and Y - Setup: Set height adjustment to part height - Inserting the part - Triggering via 2-hand button and holding until drilling is completed - Removal of the finished part and placement  ...

Clamp length: - mm Clamp width: - mm 0: - Nm Glass bead nailer 2 P Jumbo automatic E.C. Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation, With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop devi ...

Description: By inserting CHMER 2-axis display ACU-RITE 300 x 200 mm stroke Digital display Collection on: 29/04/2024 or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item description weight approx.: 1,700 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,700 x 1,900 mm

Complete processing and packaging line for ice cream sticks, among other mini Magnums, consisting of: (2x) Tetra Laval continuous ice cream freezers, type: KF 1150 XC, serial numbers: Z114.7918 and Z114.7846, 3x380 V, 50 Hz, 40/30 A, 25 kA. (2x) Lembke GmbH stick inserting system, model: Autostick, type: SL, serial numbers: 665 and 666, year of construction: 2004, 400 V, 50 Hz, 1.5 kW. (2x) ice cream servo cutter/slicer. Gram tray tunnel freezer, model: BT-Line, machine number: 84-400-3118, year of construction: 1998. Gram Equipment product feeder for adding various products like chocolate or nuts, type: SAM4-750/40-AHR, serial number: 84-510-0007, year of construction: 1998. Gram Equipment transport and drying belt for ice cream sticks, type: Slat Conveyor. Serial number: 84-400-3033, year of construction: 1998. Gram Equipment Multi-Lane wrapping machine for ice cream sticks, type: HSW- ...

Overview This filling line was part of a whole brewery and was assembled in 2015 by German manufacturer Hormes. The line will be dismantled soon. The bottling line recently ran at 15,000 bph with 0.33L glass bottles. Components Glass Depalletizer | Hormes Set up for 1 pallet size, new glass pallet: 1000 mm x 1200 mm The chain hoist is driven by an electric motor. The traverse has a length of approx. 4,500 mm Fully automatic rinser | Hormes Capacity: up to 15,000 bph Number of spray nozzles at least 36 Equipped for 1 bottle type The inside of the bottles is sprayed with fresh water Spraying with fresh water approx. 1.5 sec., draining approx. 5 sec. Inlet auger, star wheels and guides are easily replaceable Machine cladding made entirely of stainless steel Electrical connected load: 230/400V, 50Hz, approx. 4 kW. With new S7 control system Automatic bottle filling and capping machine | KHS  ...

Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x Workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Clear width: 3,000 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 3,200 mm Particleboard depth: 600 mm Surface: coated if necessary (possibly in two parts) 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 2,980 mm P ...

Grooving machine for throughfeed process Brand: Vitap Type: Grooving New machine For the processing of acoustic panels Processing unit: - Shaft with 7 presettable saw blades, distance 30mm. - Blade thickness 4mm - Rotation of the shaft , 7000 rpm. - presetting with rapid hook HSK - Max diameter of the blade 125mm Workpieces: - Max. thickness of the panel 50mm - Max weight of the panel: Kg 50 - Max panel size : X no limit, Y 1200 mm, Z 50 mm - Min panel size: X 400 mm, Y 300 mm, Z 12 mm - Panel feeding speed : 25m/min Characteristics: 3 controlled axes: - X Axis - Panel movement with two dinamic clamps - Y Axis - Grooving head movement with pinion and precision rack - Z Axis - Movement with screw at spherical recirculation - Newly patented, high rigidity operating unit movement on Y and Z axis. - Constant side pushing to keep the 0-line - Positioning ...

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

Automatic copying device: x ja/nein converter: x ja/nein turning speeds: 11000 U/min Number of knives: NA z= Diameter: NA mm Length: mm Shank diameter: mm Motor output: kW Dimensions (L/W/H): mm Vertikal stroke: mm Table dimensions: mm Dust suction hood: mm Diameter of the saw arbor: mm Length of the rolling table: mm Sawblade tiltable: ° milling stroke vertical: mm total power requirement: kw Weight: kg Spindle diameter: mm Length of the planing table: mm Number of heads vertical: St. Number of heads horizontal: St. Number of milling agregates: St. Number of knives: St. Number of sanding units: st. Number of spindles: St. Number of spindle head vertical: St. Number of spindles head horizontal: St. Number of milling spindles: St. : St. Number of tools: St. Working width: mm Year: Speed of boring spindles: U/min. Required air-pressure: bar Dowel insertingunits: St. Electrical height adj ...