142,499 used machines on RESALE, but how to find them? Machine Search
B&A REF: 9362 TON: 440 SCREW DIAMETER: 80MM SHOT WEIGHT: 1895 STROKE VOLUME: 2060CM3 INJECTION PRESSURE: 1540AR PLATEN SIZES: 1120 X 1120MM DBTB: 740 X 740MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 830MM MAX DAYLIGHT: 1680MM EJECTOR STROKE: 305MM CONTROLS: SEF 100 CORE PULLING: 2 AIR VALVES: 2 MOTOR: 55 HEATING CAPACITY: 33KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC
Key data: 7500 mm, 2605 , 90
Screw diameter: 90 mm Injection weight in polystyrene: 2605 g Clamping force: 7500 kN Screw diameter: 90 mm Stroke volume: 2863 cm³ Injection weight in polystyrene: 2605 g/hp Injection pressure: 1,870 bar Clamping force: 750 t Lights Tie-bar spacing H x V: 1110 x 960 mm Tool installation height - min.: 450 mm Opening distance: 900/1400 mm Microprocessor control: KEBA 2985- 15' touch screen Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / Without water battery: -/- Pump drive power: 65 kW Total connected load: 84 kW Total weight: 30,000 kg Total size: 8.6 x 2.9 x 2.7 m Payment terms: 100 % before taking over the machine, net only
Key data: 1600 , 340 , 45
NEGRI BOSSI 160 T, model canbio 1600H-670 Year: 2014 Clamping force: 160 T Injection volume: 374 cm³ Injection capacity: 340 gr (PS) Screw diameter: 45 mm Injection pressure: 1780 bars Mold thickness (min/max): 170 - 550 mm Opening stroke: 470 mm Distance between tie bars (H x V): 460 x 570 mm Platen dimensions : 690 x 810 mm Weight: 6150 kg
Injection moulding machines NISSESI ASB Auxiliary equipment: Chiller Air dryer Dehumidifier PET dryer Blower
KM 1300-12000 MX incl. KUKA robot Technical data Year of Make: 2007 Closing page Clamping force: 1300 t Opening distance/installation height max. : 2300 mm Max. spacing of the clamping plates: 4000 mm Tool installation height min./max. : 1000 - 1700 mm Clamping plate max. Height: 1910 mm Min. tool size: 1000 - 1700 mm Lights spar spacing: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Splash side Screw diameter: 135 mm Displacement: 8588 cc Core Cables AWS/DS: 1/1 Needle gate tire. : 1 Machine is delivered with Kuka robot and can be viewed in production.
Used NISSEI ASB injection molding machine, 2 unit - Year 2017 Technical Specifications & Performance Data Nissei ASB PET preform injection molding equipment for the production of PET preforms used in water, carbonated soft drink and oil bottle applications. The available production set comprises two injection molding machines manufactured in 2017, supported by mould inventory and auxiliary cooling, drying and dehumidification equipment. Manufacturer: Nissei ASB / ASB International Pvt. Ltd. Injection molding machines: 2 units Models: PM-70/65 NII and PM-70/111N Cycle time: 12 sec 5 cycles per minute ( 300 cycles per hour). No. of cavities: 24 Electrical supply: 415 V, 50 Hz, 137 A for PM-70/65 NII; 166 A for PM-70/111N Machine mass: 10,000 kg for PM-70/65 NII and 11,500 kg for PM-70/111N Available mould inventory: 8 mould references for preform weights from 10 g to 32 g Advanced Automati ...
Used AOKI SBIII-250LS-50 Injection molding machine - Year 2010Technical Specifications & Performance DataUsed AOKI SBIII-250LS-50 injection blow molding machine for industrial packaging and PET preform production. This machine is designed to produce PET preforms, supporting efficient preform manufacturing as part of an independent container production operation.Manufacturer: AOKI TECHNICAL LABORATORY, INC.Model: SBIII-250LS-50Year of manufacture: 2010Electrical supply: 3-phase AC, 220 V, 60 HzInstalled power: 50.2 kWCurrent: 165 AMachine weight: 10,400 kgHydraulic pressure: 14.0 MPaPneumatic pressure: 3.0 MPaWater supply pressure: 0.3 MPaAdvanced Automation & Control SystemsThe AOKI SBIII-250LS-50 operates on a 3-phase AC electrical supply rated at 220 V and 60 Hz. Its 50.2 kW power requirement and 165 A current rating should be considered when planning electrical distribution, protectio ...
Used HUSKY HPETL eletric injection molding machine - 230 ton 48 cavity - Year 2015Technical Specifications & Performance DataThis Husky electric injection molding machine is designed for high-output PET preform manufacturing in industrial packaging and beverage production environments. Manufactured in 2015, the HPETL230E-RSE95D-95 is configured with a 230-ton clamping force and a 95 mm screw, providing a robust platform for repeatable preform molding operations.Manufacturer: HuskyModel: HPETL230E-RSE95D-95Year: 2015Clamping force: 230 tons / 2254 kNScrew diameter: 95 mmInjection capacity: 2658 cm³Cavity configuration: 48 cavitiesIncluded mold configuration: 14 g preform, 48 cavities, 30 mm neckAdvanced Automation & Control SystemsThe machine is supplied with a robot to support automated preform handling after molding. Its electric injection molding architecture is intended to provide co ...
Key data: 27000 kN, 150 mm
Engel Duo 17060/2700 Year 2021 approx. 17500h tiebar distance: 21751750, mold height: 800-1900mm, Opening Stroket 3100mm max platen distance 3900mm screw 150mm, Capa: 10,780cm3, pressure 1600bar
Injection Mold Type: Plastic injection mold Year of build: 2022 Mold Features High durability tool steel construction Reinforced cavity design for large part molding Multi-point injection to ensure uniform filling Optimized cooling system to reduce cycle time Robust ejection system for large plastic parts Designed for high-volume industrial production Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-36
Key data: 1000 kN, 132 g/PS, 35 mm
Arburg 420C-1000-290 Injection Moulding Machine (261) with sorting flap Number: 261 Availability: in stock Year of production: 2014 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 2000 Clamping force [kN]: 1000 Gap spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Minimum mould height [mm]: 250 Control Type: Selogica Tongue: English, German Installed power [kW]: 21.4 Working time [h]: 59000 (new pump 13000) Weight [kg]: 3640 Dimensions [mm]: 4300 x 1700 Feed hopper: NO Robot connection: Yes Core string: 1x Air Valve: 1x Control of mold heating: 3x
Used AOKI AL-500LL-50S injection molding machine - Year 2018Technical Specifications & Performance DataThe AOKI AL-500LL-50S is an injection molding machine designed for PET container manufacturing through an integrated injection and blow molding process. This used bottling line asset is configured with 7 cavities, supporting efficient production of molded containers for industrial packaging and beverage production applications.Manufacturer: AOKI Technical Laboratory, Inc.Model: AL-500LL-50SManufacturing year: 2018Including: compressor and chillerCavity configuration: 7 cavitiesScrew diameter: 64 mmInjection capacity: 522.8 cm³/shotInjection mold clamping force: 500.3 kNPreform length below neck: 150 mmBlow mold clamping force: 608.3 kNBlow air pressure: 3.0 MPaAdvanced Automation & Control SystemsThe machine is equipped for three-phase electrical operation at 380 V and 50 Hz. Its insta ...
Ø25 mm and 35 mm, protective covers Auction-ID: A7-51576-7
Used AUTOMA AT PLUS 5D HDPE injection molding machine 5 liter - Year 2001Technical Specifications & Performance DataThe Automa AT PLUS 5D is an industrial molding machine configured for HDPE container production. It is equipped with a double carriage and a single-head arrangement, supporting controlled and repeatable handling during the production cycle. The machine is designed for 5-liter applications and features a head center distance of 160 mm.Manufacturer: AutomaModel: AT PLUS 5DYear: 2001Application: HDPE container productionContainer capacity: 5 litersCarriage configuration: Double carriageHead configuration: Single headHead center distance: 160 mmAdvanced Automation & Control SystemsThe double-carriage configuration is intended to support coordinated machine movement and consistent production handling. The single-head layout provides a straightforward operating arrangement for de ...
Key data: 350 , 54 , 28
BOY 35 E injection molding machine in good condition Type : 350-92 35E Year: 2013 Screw diameter : 28 mm Injection pressure: 1639 bars Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr Clamping Force: 35 Tons Distance between tie bar bar: 280 x 254 mm Min mould height : 200 mm Max daylight between platen : 500 mm Dimensions: 2400 x 820 x 1950 mm Weight: 1195 kg + BOY option : a laminar flow and carrot peck
Key data: 5000 , 1690 , 800
SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Condition: Very good Technical Specifications: Clamping force: 485 T / 4850 KN Tie bar spacing: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max): 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Screw diameter: 80 mm L/D ratio: 20 Additional Features: 4 hydraulic cores 1 air valve 2 junction boxes with 8 channels each Power panel: Rear: 4 three-phase sockets, 1 neutral, 1 ground Front: 1 three-phase socket, 1 neutral, 1 ground Dimensions & Weight: Weight: 21,500 kg Overall dimensions (L x W x H): 8.71 x 2.65 x 2.14 m
Injection Mold Type: Plastic injection mold Year of build: 2022 Mold Features High durability tool steel construction Reinforced cavity design for large part molding Multi-point injection to ensure uniform filling Optimized cooling system to reduce cycle time Robust ejection system for large plastic parts Designed for high-volume industrial production Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51509-36
Presse à injecter KRAUSS MAFFEI 35 T type 35-55 CX Commande MC5 Année 2005 En excellent état Force de fermeture : 35 T - 350 KN Diamètre vis : 20 mm Pression d’injection : 2500 bars Force de fermeture : 350 kN Force d’ouverture : 39,9 kN Dimensions des plateaux : 540 × 540 mm Distance entre colonnes : 320 × 320 mm Course d'ouverture maximale : 350 mm Epaisseur mini du moule : 175 mm Ouverture maximale: 525 mm Course d’éjection : 100 mm Force d’éjection :22,6 kN Dimensions : 3500 mm x 1500 mm x 2000 mm de haut Poids de la machine : 2 700 kg
IMV Presse HPF-AZ80 800ton Hydraulic Injection Moulding Press (2008) With Overhead hydraulic tank and robot loading system
Manufacturer: TEDERIC Model: D 800/i7500 (900) Year: 2019 Condition: Used Stock number: 9666 Clamping force: 9000 kN Screw diameter: 100 mm Injection capacity: 4050 cc Machine length: 11340 mm Machine width: 2440 mm Machine height: 2450 mm Injection weight: 42000 kg The offer includes: PROTECH PTC 50 Cooling Unit TEMPER SPTCV-9 Temperature Controller SHINI SDDU 160H Drying Device SHINI 3660 Plastic Shredder
BILLION - Dixit 4 - SN 06315351 (Broken emergency stop button) Injection molding machine control screen Auction-ID: A1-51953-148
BILLION - Dixit 4 - SN 06080580 Injection molding machine control screen Auction-ID: A1-51953-147
Key data: 1200 kN, 30 mm
warehouse no.: 503724 manufacturer: Wittmann Battenfeld type: Vpower 120-350 R1300 controller: Unilog B8 year of construction: 2021 clamping force: 1200 kN distance between tie-bars h x v: 1160 x mm size of mould plates h x v: 740 x 580 mm min. mould height: 250 mm max. open daylight: 600 mm opening stroke: 350 mm round table diameter: 1300 mm screw diameter: 30 mm swept volume: 106 ccm injection pressure: 2835 bar An additional plasticizing unit is also available with the following technical specifications: Screw diameter: 18 mm Stroke volume: 22.9 ccm Specific injection pressure: 3000 bar measures of machine l x w x h: 4.4m x 2.09m x 3.8m total weight: 10000KG equipment included screen text german core pulling pneum. 2 x injection unit extremely wear resistant and corrosion resistant interface EUROMAP 63 interface OPC
used
B&A REF: 9376 TON: 200 SCREW DIAMETER: 45MM SHOT WEIGHT: 291 STROKE VOLUME: 359CM3 INJECTION PRESSURE: 2470AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM ENJECTOR STROKE: 200MM CONTROLS: SELOGICA
Ferromatik Milacron K110/60-S/2F MONO for sale The hour counter only shows about 3,844 hours. According to the seller, the machine was used exclusively for training purposes and never ran in series production. • Year of construction: 1996 • Clamping force: 1,100 kN • Two spraying units: horizontal 254 cc at 1,936 bar, vertical 135 cc at 1,964 bar • Weight: approx. 6,300 kg Location: Denmark
B&A REF: 9357 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 359 STROKE VOLUME: 395CM3 INJECTION PRESSURE: 1520AR PLATEN SIZES: 720 X 727MM DBTB: 470 X 470MM MIN MOULD HEIGHT: 180MM MAX MOULD HEIGHT: 520MM MOULD OPENING STROKE: 430MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 140MM CONTROLS: KEBA CORE PULLING: 2 AIR VALVES: 2 MOTOR: SERVO 18.5 HEATING CAPACITY: 11.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
B&A REF: 9372 TON: 90 SCREW DIAMETER: 36MM SHOT WEIGHT: 139 STROKE VOLUME: 153CM3 INJECTION PRESSURE: 1850AR PLATEN SIZES: 540 X 540MM DBTB: 360 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 390MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 700MM EJECTOR STROKE: 100MM CONTROLS: KEBA CORE PULLING: 2 AIR VALVES: 1 MOTOR: SERVO 11 HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 67 ROBOT: SPRUE PICKER SCREW DRIVE: HYDRAULIC ACCUMULATED: 1
B&A REF: 9365 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570 MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC
B&A REF: 9364 TON: 160 SCREW DIAMETER: 450MM SHOT WEIGHT: 330 STROKE VOLUME: 360CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 730 X 780MM DBTB: 450 X 510MM MIN MOULD HEIGHT: 170MM MAX MOULD HEIGHT: 550MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 1010MM EJECTOR STROKE: 200MM CONTROLS: DIMI EL 2 PLUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 18 HEATING CAPACITY: 12KW SCREW DRIVE: HYDRAULIC
B&A REF: 9363 TON: 150 SCREW DIAMETER: 45MM SHOT WEIGHT: 330 STROKE VOLUME: 353CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 680 X 680MM DBTB: 450 X 450MM MIN MOULD HEIGHT: 230MM MAX MOULD HEIGHT: 520MM MOULD OPENING STROKE: 460MM MAX DAYLIGHT: 980MM EJECTOR STROKE: 150MM CONTROLS: DIMI EL2 PLUS AIR VALVES: 1 MOTOR: 22 HEATING CAPACITY : 10KW SCREW DRIVE: HYDRAULIC
B&A REF: 9362 TON: 440 SCREW DIAMETER: 80MM SHOT WEIGHT: 1895 STROKE VOLUME: 2060CM3 INJECTION PRESSURE: 1540AR PLATEN SIZES: 1120 X 1120MM DBTB: 740 X 740MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 830MM MAX DAYLIGHT: 1680MM EJECTOR STROKE: 305MM CONTROLS: SEF 100 CORE PULLING: 2 AIR VALVES: 2 MOTOR: 55 HEATING CAPACITY: 33KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC
B&A REF: 9356 TON: 120 SCREW DIAMETER: 35MM SHOT WEIGHT: 160 STROKE VOLUME: 192CM3 INJECTION PRESSURE: 2600AR PLATEN SIZES: 680 X 650MM DBTB: 450 X 400MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 410MM MAX DAYLIGHT: 910MM EJECTOR STROKE: 135MM CONTROLS: DIMI EL2 PLUS AIR VALVES: 1 HEATING CAPACITY: 7.5KW SCREW DRIVE: ELECTRIC
B&A REF: 9348 TON: 80 SCREW DIAMETER: 30MM SHOT WEIGHT: 102 STROKE VOLUME: 113CM3 INJECTION PRESSURE: 2400AR PLATEN SIZES: 750 X 600MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 460MM MAX DAYLIGHT: 700MM EJECTOR STROKE: 100MM CONTROLS: CC 200 AIR VALVES: 2 MOTOR: 15 HEATING CAPACITY: 9.2KW SCREW DRIVE: HYDRAULIC
B&A REF: 9375 TON: 420 SCREW DIAMETER: 80MM SHOT WEIGHT: 1555 STROKE VOLUME: 1709CM3 INJECTION PRESSURE: 1950AR PLATEN SIZES: 1350 X 1350MM DBTB: 920 X 920MM MIN MOULD HEIGHT: 350MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 700MM MAX DAYLIGHT: 1450MM EJECTOR STROKE: 220MM CONTROLS: CC 200 TOUCH CORE PULLING: 3 AIR VALVES: 2 HEATING CAPACITY: 44.7KW SCREW DRIVE: ELECTRIC
B&A REF: 9367 TON: 160 SCREW DIAMETER: 45MM SHOT WEIGHT: 291 STROKE VOLUME: 320CM3 INJECTION PRESSURE: 1880 AR PLATEN SIZES: 720 X 727MM DBTB: 470 X 470MM MIN MOULD HEIGHT: 180MM MAX MOULD HEIGHT: 520MM MOULD OPENING STROKE: 430MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 140MM CONTROLS: KEBA CORE PULLING: 2 AIR VALVES: 2 MOTOR: SERVO 18.5 HEATING CAPACITY: 11.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
B&A REF: 9366 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 519 STROKE VOLUME: 570CM3 INJECTION PRESSURE: 1780AR PLATEN SIZES: 810 X 810MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 550MM MOULD OPENING STROKE: 490MM MAX DAYLIGHT: 1040MM EJECTOR STROKE: 140MM CONTROLS: KEBA CORE PULLING: 2 AIR VALVES: 1 MOTOR: SERVO 30 HEATING CAPACITY: 21.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
B&A REF: 9352 TON: 500 SCREW DIAMETER: 90MM SHOT WEIGHT: 2365 STROKE VOLUME: 2600CM3 INJECTION PRESSURE: 1630AR PLATEN SIZES: 1310 X 1260MM DBTB: 900 X 800MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1750MM EJECTOR STROKE: 300MM CONTROLS: COLUMBIA CORE PULLING: 2 AIR VALVES: 2 MOTOR: 55 HEATING CAPACITY: 34KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
MILACRON Magna T MTs 275-1540 Injection Molding Machine: - Control ENDURA Touch - Power consumption 219 A - Plate spacing 1560 mm - Column spacing 660x660 mm - Shot weight 523-1530 g - Without dosing container and tools - Incl. SAR ELECTRONIC handling and MFT-TECHNIK sorting table SAR ELECTRONIC Handling: - Year of construction 2018 - Dimensions 6000x5000x3000 mm - Full protective cab with safety door and hand control panel - 1x KUKA KR 20 R 1810 6-axis robot with GIMATEC QC 90-A gripper adapter and 1x KUKA KR 6 R900 6-axis robot with GIMATEC QC 50-A gripper adapter - Marking laser with scanner and suction - Floor conveyor system with lifting unit - Base frame and transfer station, base frame with automatic screwdriver Auction-ID: A1-51309-20
Key data: 250 kN, 30 mm
warehouse no.: 503725 manufacturer: ARBURG type: Allrounder 270 S 250-170 controller: SELOGICA year of construction: 2011 operation hours: 59000 h technical data clamping unit clamping force: 250 kN distance between tie-bars h x v: 270 x 270 mm size of mould plates h x v: 380 x 380 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2000 bar screw length: 20 l/d screw torque: 250 N injection rate into the open: 96 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 3.18m x 1.43m x 1.85m total weight: 2110KG equipment included incl. Spruepicker screen ...
mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2
The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons
Kosme KSB6R rotative PET blow moulding machine manufacturing year 2008 with full upgrade by Kosme in 2024 with linear oven and 8 heating modules rotative blowing wheel for 6 quick change molds personnalisation for preform neck 21/29 Capacity > 10.000 bph Machine equipped with: -pallet preform tipper and hopper -preform elevator & conveying system, -preform unscrambler & preform infeed rail -Kosme linear oven & rotative blowing wheel -Kosme machine control by touch screen& drive -Kosme electrical cabinet Machine was in production till recently, now professionally dismantled and transfered to our warehouse. Excellent machine and opportunity, see video with below link Available immediately Very interesting pricing Ask for a detailled quote here !
Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges -Cutting knife -Edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135 kg
A total of four custom-built Wheelabrator turnover molding machines and one small prototype are available. Max. compressed air: 8bar. These are custom-built systems with the corresponding prototype. The maximum product size that can be produced on the four main machines is shown in the image. An on-site inspection is possible.
Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000
Various used blow molds in great condition Size: Up to 1 liter 1-2 compartment cavity Various used blow molds in super condition Size: Up to 1 liter 1-2 compartment cavity
- Automatic horizontal molding line for green sand casting. - Production capacity up to 120 moulds/hour. - Sand consumption 72 Tons/h. - Weight of the pieces: from 20 kg to 100 kg. - Includes: - SEIATSU ACE 5 automatic molding machine (air stream and high-pressure pressing). - Molding box size: 900 × 700 × 230/230 mm. - Nominal production of the molding machine: up to 140 full molds/hour. - Automatic model change. - Hydraulic system and programmable electronic control. - Manual placement line for taps and hammers. - Automatic mold closing system. - 3 ton casting bucket with automatic checkweighing system. - Transport of moulds by means of trolleys on rails. - 5 cooling lanes with capacity for 36 molds each. - 3 streets with forced ventilation and 2 streets with natural ventilation. - Automatic track change transferors. - Rotary trommel for demoulding and sand separatio ...
Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022
maximum number of results exceeded
please refine your search
25.000 € 
