We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,887 used machines on RESALE, but how to find them? Machine Search
used
AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized b ...
used
Infratec VarioCAM HDx 625 Professional infrared camera Thermal imaging camera 5.6 " TFT thermography measuring system with IRBIS software remotely controllable via PC Condition: Used TOP condition - purchase 2020 - functionally tested - rewriting of the SW license included Thermography measuring system and infrared thermal imaging camera Type: VaroCAM HDx 625 Manufacturer: InfraTec GmbH, Dresden, Germany Date of purchase according to invoice: 18.09.2020 Typical areas of application are: - Therographic inspection of electrical and mechanical installations and aggregates - Optimization of components and assemblies - Material investigations - Control of process temperatures -Quality assurance - Building thermography Execution: - 5.6 " TFT monitor for the live image - Detector format 640 x 480 -Distance measurement - permanete autom. Focusing - Spot editor (tem ...
used
- Plate size: 724 x 838 mm - MCU (3 Cassettes) GTO / SM 52 / SM 74 - Chemical free used - Stacker - without inline punch - without RIP / Workstation - 50.500 plate exposures
used
Pusen UTV-100 Imaging System for MDH Ureteroscope The UTV-100 HD quality imaging system for use with the reusable MDH ureteroscope includes a display and video processor with video output for a second HD display (not included). Resolution 1024x768 Display size 12.1" Video Interface RCA, HDMI Memory: 8 GB Recording: Over 500 images, or 30 minutes of video Dimensions 315mm. 308mm. 187mm Weight 4.3 kg Condition: Used, Kratzer Bilschirm You can find the right PV210 SDI image processing processor in our shop! International shipping costs on request!
used
Grafoteam PST 26/780 plate stacker; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26/780; good condition; cleaned and checked; new arm motor; max.plate size 820x780mm, min.324x394mm.
used
Image area: 745x600mm, resolution: 2540dpi.
used
CTP Heidelberg Suprasetter A52/A74, Year 2006 approx: 9 K Plates done RIP Prinect Meta Dimension Available: at short term
used
ULTRAFOCUS DXA is a high-resolution X-ray Dual Photon Absorption (DEXA) imaging and measurement system. The entire system comprises an X-ray unit and a workstation, and can be installed on the laboratory bench or directly in the vivarium to protect the integrity of the colony. With its 10 x 15 cm CMOS detector and energy range from 10 to 100 kV, ULTRAFOCUS DXA is ideal for imaging a wide range of samples and for true DEXA analysis. The microfocus tube and geometric magnification - up to X 6 - provide images with a resolution of 8 μm. In DEXA mode, the system automatically calculates lean and fat mass (BMD - BMC) with percentages. Data for the whole body and the area of interest (ROI) are presented. Used under GMP conditions, it has been out of service since November 2023.
used
Year 2007 model:A52/A74 Incl. plate processor Incl. stacker Located Germany Available: immediately
used
Imagesetter KODAK MAGNUS Q800 Platesetter F-Speed with XPO Baujahr 2015 / Year 2015 Total Counting 57.000 Plates - 2.200 working hours Laser head 2.5 Resolution 2400 dpi Factory Upgrade – SCU Option Factory Upgrade – Additional Single-Cassette and Trolley Extra Casette with transport trolley for SCU Factory Upgrade – Single Punch Hole for Integrated Punch Option Inline Plate Punching with Bacher-Heidelberg System Grafoteam PST 480-B Compact Plate stacker up to 100 plates (0,3mm) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect
used
Year 2008 Model:A52/A74 Incl. plate processor Incl. PC + RIP Software Located Germany Available: immediately
used
Description: Serial number: QVA01788 Operating voltage: 220 V Frequency: 50/60 Hz Connection: 300 W Rated current: 1.8 A Table dimensions: 450 x 300 mm Software: MESSURE X Including measurement capability for 3D (Z-axis measurement) Approx. Onsite Dimension. (l x w x h): 900 x 800 x 800 mm, weight approx.: 150 kg
used
Thermal imaging camera Infrared camera Brand: Infratec Type: PIR uc With suitcase
used
Year 2006 Plate size max.: 830 x 630 mm Plate thickness: 0.15 to 0.3 mm Incl. plate processor Incl. PC + RIP Software Screen Dainippon PT-R4300E Located Germany Available: immediately
used
Dental diode laser MLT Image Plus, type 109.08.06, S/N 0608105, rollable, safety goggles, last safety inspection 12.11.2023, manuals, instructions for use, DVD-Video, control sheet available, function tested
used
I sell my combination of sieve platesetter and sieve drying oven with 4 compartments. The machine is also suitable for large screens. Technical equipment: - Compact system with spot light copy lamp - Light dosing device with photocell and UV intensity measurement, UV filter and program memory - Vacuum copy frame for all types of stencils with quick-release fastener and highly flexible blanket - Automatic operation and display of vacuum time, switching and venting - UV-resistant sun protection curtain - Copy unit with 2000 / 5000 W; Connected load 380 V 50 Hz - Screen drying oven in the base with 4 compartments for dust-free storage Drying of the stencils. The stencils are pushed in. - Warm air blower - Can be dismantled for transport - Copy frame inner dimension 140 x 170 cm Dimensions: Height: approx. 188 cm (up to the top edge of the curtain rod; machine only: 97 cm); ...
new
High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Foerder quantity: 32 l/min. - Engine: Honda GX390 petrol 8.7kW - Dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Manometer - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HD hose 3/8" + 10 m HD hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles Oylbt - Pistol with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning device that is ideal for cleaning and removing pipe blockages for pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages of house ...
new
The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General Specifications: ----- Drive motor: 2 Cylinder 4 Stroke Petrol Engine, Electric Start Power of the drive motor: 16.4 kW Spee ...
used
Floor saw -Motor: Honda petrol engine -Power: 8.1 kW/11 PS -Saw blade diameter: 400 mm -Number: 3 pieces available -Price: per piece
used
<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now
used
AGFA Laser for SelectSet 5000. The laser is tested and works - can be seen on the picture. We are happy to send you the high-resolution original image, here the laser beam can be seen more clearly. Available now
used
M. No.: 91080-41861 // Power: first 70 Sec. Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi
used
Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...
used
Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...
Offer: Sgns railway wagons for sale. These are sold from location Europe: Unit price is from Station Europa see specification in the appendix: Offer price for these cars: Price € on request piece plus VAT If you would like more information, please contact us. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Error reserved; All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; We do not accept any liability for used material. Warr ...
used
- Film and carton packaging printing with quick-drying ink at high production speeds - Prints on a variety of solid and flexible surfaces - CoLOS Create, CoLOS Control and CoLOS Enterprise software packages for network control of printers and print image creation - easy on and off - Packaging material without interruption of production - Printing speed up to 208 m/min - Pressure height up to 25.4 mm - Print length up to 35.6 cm - Deposit of up to 50 captions with up to 8 lines - Barcodes: Interleaved two of five , Code 39, Code 128,EAN-13, UPC-A - Sensors for detection of cardboard packaging, connection and extension cables (standard) - LCD graphics display with backlight (standard)
AT- Cylinder heads complete with valves in exchange for DB OM 401-444LA,MAN D2866-2V,D2566MF-2V,DEUTZ FL912,FL913,BFL913 info@miw-zeven.de
used
OM 444 LA engine as a crane or construction machines motor can be used. The price is an exchange price.
used
Control station Gema / ITW until the relocation of the plant 2009 the plant was maintained by ITW Gema, all units in the top state. 6 times unit static pistols 100 KV 2 times unit lifting device control for up to 4 pistols. Steering position and images to be followed by lifting devices as well as automatic pistols. If you have any questions, please, to the technology. In operation, handling .etc. of course I like to advise . Please send a short info to my AB with tel. I will contact you immediately . Mfg. Pradler Machine Service 05242 / 43186 Mobile 0171 / 4513691 email: info@pradler.com
Well-preserved commission rack. Images can be sent. With a friendly greeting Tande & Translations
Ladies and gentlemen, we can offer a briquette plant. We are looking for large quantities of coal worldwide. Maybe also cooperations with the producer. Distribution of coal. We can offer mining machinery and equipment. We can offer consulting in mining. We would be pleased to have an offer. Yours sincerely Trade & Translations Hans Harald Benz
used
Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...
new
GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...
used
Waldrich-Coburg leadership roads and surfaces sanding machine type: 0-15 SNC 2520 X/3 m Max.-Schleiflaenge: 3420 mms Max.-Schleifbreite: 1450 mms Max.-working height: 1005 mms Aufspannflaeche length: 3000 mms Aufspannflaeche width: 1250 mms accessories: -table fine adjustment -Papierbandfilter-Anlage -Schipmke-Haan DK150 V - back chill arrangement surface need: L=11,8m B=4,9m H=4,7m weight: 29.4 to . their prize image we await with pleasure. OTHER: the machine still stands live and can be visited any time.
used
GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...
used
- Delivers instantly dry prints on high speed flexible film and cartoning lines - Print on a wide variety of rigid and flexible substrates - Network control and image design software with CoLOS Create,Control and Enterprise - It can replace consumables without the interruption of production - Print speeds up to 208 meters/min (680 ft/min) - Easy startup / shutdown - Print height up to 25.4mm. - Message length up to 35.6 cm - Store up to 50 messages up to 8 lines of text - Barcodes: Interleaved 2 of 5, code 39, code 128, EAN 13 and UPC A. - Carton package sensors, proximity switch or pigtail cable (standard) - Backlit LCD graphics display standard Without documents
used
AGFA Avantra 30 with short Developer in great condition. Resolution: 1200, 1800, 2400 and 3600 dpi - max. image area: 75,4 x 63,5 cm. Available: now
new
GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...
new
Label to winder TYPE CBV - EW / Virgin The device has a Frquenzumrichter to control the speed. There are three images for the default label cores (20 / 40 / 76) Further information on request!
used
GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...
new
GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...
used
OM 442 LA Mercedes-Benz replacement motor 340 HP Water-cooled 6-cylinder series engine (diesel) Wirtgen-version Complete the repair Mercedes Benz engine OM 442 LA. The engine was repaired using original spare parts. To investigate the durability of the engine, the engine has undergone an engine test run. Through this process, the customer receives an acceptance Protocol. The warranty period is 12 months or 3,600 hours of operation. Complete engine includes: Engine with fuel injection system, water pump, oil and fuel filter, turbocharger and compressor. Old part of deposit: 12.750,00
used
GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...
used
OM 501 LA Mercedes-Benz replacement motor 250-315 kW Water-cooled 6-cylinder engine (diesel) High pressure fuel injection system Euro II Complete the repair Mercedes Benz engine OM 501 LA. The engine was repaired using original spare parts. To investigate the durability of the engine, the engine has undergone an engine test run. Through this process, the customer receives an acceptance Protocol. The warranty period is 12 months or 3,600 hours of operation. Old part of deposit: 6.800,00 Complete engine includes: Engine with fuel injection system, water pump, oil and fuel filter, turbocharger and compressor.
used
OM 502 LA Mercedes-Benz replacement motor 330-448 kW 440 HP Water-cooled 6-cylinder engine (diesel) High pressure fuel injection system Euro II Complete the repair Mercedes Benz engine OM 502 LA. The engine was repaired using original spare parts. To investigate the durability of the engine, the engine has undergone an engine test run. Through this process, the customer receives an acceptance Protocol. The warranty period is 12 months or 3,600 hours of operation. Old part of deposit: 7.500,00 Complete engine includes: Engine with fuel injection system, water pump, oil and fuel filter, turbocharger and compressor.
used
OM 906 LA Mercedes-Benz replacement motor 150-205 kW 250 HP water-cooled 6-cylinder series engine (diesel) with high pressure fuel injection system Complete the repair Mercedes Benz engine OM 906 LA. The engine was repaired using original spare parts. To investigate the durability of the engine, the engine has undergone an engine test run. Through this process, the customer receives an acceptance Protocol. The warranty period is 12 months or 3,600 hours of operation. Complete engine includes: Engine with fuel injection system, water pump, oil and fuel filter, turbocharger and compressor. Old part of deposit: 5.500,00
used
OM 926 LA Mercedes-Benz replacement motor 240 kW 320 HP Water-cooled 6-cylinder series engine (diesel) Euro 5 suitable for Mercedes Axor Complete the repair Mercedes Benz engine OM 926 LA. The engine was repaired using original spare parts. To investigate the durability of the engine, the engine has undergone an engine test run. Through this process, the customer receives an acceptance Protocol. The warranty period is 12 months or 3,600 hours of operation. Complete engine includes: Engine with fuel injection system, water pump, oil and fuel filter, turbocharger and compressor. Old part of deposit: 5.500,00
used
Industrial PC or control unit EST. technology consisting of various Flexcommander modules: -EST technology Flexcommander power supply 230V, part No.: 008741 -EST technology Flexcommander disk drive floppy, part No.: 0008740 -EST technology Flexcommander CPU, part No.: 0008734 -EST technology Flexcommander Ethernet, part No.: 0008738 -EST technology Flexcommander SLAVE PROFIBUS DP, part No.: 0008737 - EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 -EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 The Flexcommander modules are older year manufacture and used (see also images). The function was not tested, therefore no guarantee or warranty.
Multifunction X-ray machine Built in 2005 Generator Poydoros SX 65/80 Image storage LIH (last image hold) Image intensifier 23 cm Tube Optitop 150/30/50 Very good optical condition
C - arm SIEMENS Siremobil 2000 Digital image storage, dual monitor