ideal welding used for sale

An Akon welding cell including Kuka robot and 2x Dinse welding sources is available. 1) Welding robot: Kuka KR 6 R900, payload: 6kg, reach: 900mm, control: KR C4 Compact, flange load: 25kg, total weight: approx. 170kg. 2) Automatic welding cell Akon Robotics with turntable and Kuka control system. 3) Welding power source Dinse Dix PI 900. The EP motor for the 4th axis was replaced in 2023. Documentation available. On-site inspection is possible.

Rated Input Voltage: 3P AC380V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 85% Insulation class: F Protection class: IP21 Weight: 43 kg Insulation value: F Protection value: IP21 MIG TIG MMA - Input power (KVA) 13.8 10.5 11.8 - Input current (A) 21 16 18 - No-load voltage (V) 80V 80V 80V - Output current (A) 40-350 10-350 30-300 - Output voltage (V) 31.5 24 32

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

Various parts including welding wire, guns, gas nozzles, welding glass plates. Various collets and attachments; without pallet box;

Unused

Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.

current capacity: . kVA number of controlled axis: . workpiece weight: . kg : 50 zehn verschiedene Vers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.

Unused

A PlymoVent welding fume extraction system is available. Compressed air tank volume: 11l, compressed air quality: class 6, operating pressure: 4bar-5bar, compressed air consumption per pulse: 40nl-50nl. Documentation available. On-site inspection is possible.

sheet width: . mm plate thickness: . mm serial number: 20719 total power requirement: . kW weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Unused

Equipped with IGBT inverter with high duty cycle; mains voltage 400 V / 50 Hz, 3 phase; Output current 40-350 A; duty cycle 80%; welding wire diameter: 0.8-1.2mm; recommended sheet thickness: 0.5-12mm; wire feeding: 4-roll; synergy mode; double pulse function; VRD; 2T/4T function; memory; 5 languages; New in box

A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible.

length: NA mm height: NA mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible.

length: 0 mm height: 0 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Ultrasonic Welding Machine for Plastic Articles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

table length: 1200 mm table width: 800 mm table height: 900 mm table load: 2000 Kg weight of the machine ca.: 0,24 t dimensions: 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated Input Voltage: 3P AC380V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 85% Insulation class: F Protection class: IP21 Weight: 43 kg Insulation value: F Protection value: IP21 MIG TIG MMA - Input power (KVA) 13.8 10.5 11.8 - Input current (A) 21 16 18 - No-load voltage (V) 80V 80V 80V - Output current (A) 40-350 10-350 30-300 - Output voltage (V) 31.5 24 32

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

Suitable for TIG/MMA, Control range TIG: 3 - 400A,

Unused new in packaging

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

Attention, fall has damage! Works properly!

with welding helmet

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

table diameter: 1500 mm table load: 5,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 10000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,5 + 3,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Voltage 220V +-15% ; 10-130A current range; 25% duty cycle (25c) IP21S; breasts and welding hood; Inverter MMA welding machine; 25% 130A 25.2V ; 60% 84A 23.4V; 100% 65A 22.6V; fan cool;

Unused new in packaging

A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, 4th head: possible. Inner workpiece diameter min./max.: 600mm/4500mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible.

with LF24 wire feed, with various accessories

Divided over 2 pallets, Swivel arm length approx 275cm

Suitable for MMA, Control range 10 - 180A, Shoulder strap