id grinder used for sale

Description Feeding mouth size: 210 mm x 415 mm Cutting Chamber Size: 200 mm x 420 mm Engine power: 3 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Approximate production: 50 - 80 Kg/h Material Extraction: Collection drawer with suction hole.

Description Feeding Mouth Size: 210 mm x 415 mm Cutting Chamber Size: 200 mm x 420 mm Engine Power: 3 Kw Rotating Blades: 3 Fixed Blades: 2 Grid Hole Size: 5 mm Indicative Production: 50 - 80 Kg/h Material Extraction: Collection drawer with suction hole.

Description Feeding mouth size: 215 x 180 mm Cutting chamber size: 300 x 160 mm Engine power: 3 Kw Rotating Blades: 18 Fixed blades: 2 Grid Hole Size: 6 mm Production: 30/50 Kg/h Material extraction: collection drawer new belts

Description Feeding mouth size: 500 x 400 mm Cutting chamber size: 500 x 340 mm Engine power: 22 Kw Rotating Blades: 10 Fixed blades: 2 Grid Hole Size: 8 mm Material extraction: drawer for Moretto VC 35/50 suction unit

Description Inlet size: 480 mm x 600 mm Cutting Chamber Size: 410 mm x 600 mm Engine power: 18.5 kW Rotating blades: 3 Fixed blades: 2 Grid hole size: 10 mm Material extraction: collection drawer with hole for suction. Electrical panel with soft start, new blades.

max. grinding diameter:50 mm grinding length:250 mm workpiece length:300 mm total power requirement:0,7 kW weight of the machine ca.:330 kg dimensions of the machine ca.:1000 x 1000 x 1400 mm

Maximum wheel diameter 32mm power 420Watt; RPM 10,000 rpm; Chuck size 6mm; length 392mm; Weight 1.8 kg

Tested to work

Equipped with diamond discs

Controls: FANUC GE 16, including documentation and tool cones.

Grinding motor operational pressure: 3bar.

Sanding machine (inside/outside) Pagus for woodworking with sanding cylinder table-top drm. 520 mm Thickness: 22 mmw swivel 45° Motor: 380V, 50 Hz, 1.6 kW Dimensions: 520x520x1200 mm Tool moves in the vertical direction during rotation Accessories: 4 aluminium cylinders to hold the abrasives Drm.: 50, 70, 90 and 120 mm x 223 mm long

Grinding length: 50 mm Grinding width: 508 mm Grinding height: 10 mm Wheel diameter: 508 mm Spindle power: 1 kW Lapping table size: 508 mm Plate speed 70 Rpm 3 rings inside 191 mm Work load each ring 53 Kg

Grinding length: 3450 mm Grinding width: 1350 mm Grinding height: 20 mm Wheel diameter: 5 mm Spindle power: 5 kW Johannsen - T 95 table 3450 x 1350 mm Long Belt Grinding machine ( wood )MACH-ID 7698 Make: Johannsen Type: T 95 table 3450 x 1350 mm Year: 1993

Control: PLC control, complete system (without centrifuge Z 1000 ASS-II-Turbo) consisting of: Steep conveyor belt/ filling, R800/4300 Continuous system R650/6600 with spraying system/ dosing devices, Dosing device Oscillating channel D650 mm, 6000 mm long, Outlet with separation section (oscillating trough) Belt dryer (blow-off station) Removal conveyor finished parts. Process water station consisting of: 1. For aluminum dirty water tank and recirculation tank 2. For steel & casting dirty water tank and recirculation tank. Central control cabinet with PLC control The facility is still in operation and can be visited if necessary. Professional dismantling and loading are included in the price.

WALTHER TROWAL - Type Ca 650 Beclfcbhuhg -Tank diameter 1600mm -Power: 11KW -Speed 1450rpm -Timer -Otherwise as pictured

Bench belt sander Höfer Motor 4.2KW format 2.50 x 1.20 meters

Yunnan MY7120A 450 x 200 mm Worklength with magnetic table: 460 mm Grindingwidth: 200 mm Longitudinal travel X-axis (autom.): 480 mm Cross-travel Y-axis (autom.): 240 mm Travel Z-axis (autom.): 300 mm Dimensions of the table: 450 x 200 mm Distance between table -- spindlecentre: 65 > 448 mm Max dia grindingstone: dia 200 x 16 x 32 mm Spindlespeeds: 2800 rpm Motorpower: 1,5 kW Length: 1520 mm Depth: 1100 mm Height: 1640 mm Weight: 950 kg

Documentation doc-Gericke-Nibbler.pdf Description Mill for the size reduction and recycling of agglomerates, lumps and granules in mass. Manufacturer: Gericke Model: NBS 300/450 Year: 1999 Choice of granulometry: Grid or wire mesh Operating principle: Rotor with 4 blades. cutting effect on the product with the screen. Inlet section: 300 x 350 mm. Power: 3,7 KW Max capacity : 12.000 L/H (depending on product and output size). Materials: stainless steel. Mounted on a mobile frame.

Walther Trowal Centrifuge ZM03-ECO V95 Rösler Trog Vibrators R 700/1200 TE-15 Walther Trowal Centrifuge ZM03-ECO V95 Manufacturer: Walther Trowal Type: ZM03-ECO01 V95 Year of construction: 2016 El. Connected load: 11kVA Weight: 601kg Rösler Trog Vibrator R 700/1200 TE-15 Manufacturer: Rösler Type: R 700/1200 TE-15 Year of construction: 1996 El. Connected load: 10kW Weight: 1,300 kg Accessories: 1 set of abrasives (pyramid-shaped) 2 separating bulkheads for trough vibrator second sludge insert for centrifuge (1 pc is installed; 1 pc additional for replacement) 1 canister of Rösler Compound ZF 113

Technical documentation Operation-system.pdf Description of the unit Complete 3-stage micronisation system with air classifying unit including : 1 - Container emptying station - Lifting jib / crane for positioning and turning container. - 1 x Stainless steel powder container - Powder emptying system: synchronisation and tight opening of the container in order to empty the powder into a storage hopper. 2 - Micronisation unit - Bepex Pulvocron PCS 10 mill and classification The Pulvocron air classifying mill utilizes high-speed impact and internal particle size classification to produce fine powders with a narrow size distribution. Adjustable operating conditions, including tip speed, air flow, and classifier speed provides control over resultant particle size, material temperature, and capacity. Thermally conditioning the inlet air stream provides optional heating to ...

Heavy duty belt sander, belt sander, metal belt sander, polishing machine, grinding machine -Belt sanding machine: sanding belt 2030 x 75 mm, with underframe -Motor: 3 kW / 2870 rpm -Dimensions: 1230/835 / H1260 mm -Weight: 180 kg

Side mill, granulator, shredder, plastic shredder, cutting mill, granulate mill, granulator, rotor mill, recycling technology, -Manufacturer: Alpinec, side mill cutting mill -Type: A16/8ROL -Drive motor: Loher 1.5 kW -Number of knives: 2 pieces-Dimensions: 740/500/H1570 mm -Weight: 124kg

Side mill, granulator, shredder, plastic shredder, cutting mill, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of knives -Manufacturer: Getecha, side mill cutting mill -Type: GRS 180-A 0000 -Drive motor: 2.2 kW -Number: 1x mills available -Dimensions: 840/700/H875 mm -Weight: 188kg/pcs

The stripping unit model 99913 is a modern system developed by Kuzlitmash. The combination of reliability, strength, and precision makes the 99913 ideal for grinding parts. The processing technology on the 99913 has been tested by operation for many years in the most difficult conditions for cleaning the outer surfaces of iron, steel, and titanium castings.

Ribon RUR1500 metric, Italy made, universal OD/ID grinding machine, in very good condition, with low hours. The machine has electric table movement, and sold with many accessories. Now stock clearance, price reduced by 15% from 9350 to 7950 EUR net! (2020.07.12.) EXW price, loaded for free on suitable truck. EU shipping at very friendly prices. Please ask if any questions. B/C: 1500mm Max. grinding diameter: 320mm Centre height: 160mm Max. weight suspended between centres: 170Kg Size of the grinding wheel: 355 (410) x 32 (60) x 127mm (The cover could take 455mm wheel) Work spindle bore: 24mm Work spindle taper: Morse 4 Taper of centre support: Morse 3 Speed of wheel: 1500/ 1730 RPM Work spindle speed: 35-310 F p. perc one increment on X wheel: 0.005mm Table swing: + - 5° Work spindle housing swing: -30° és + 90° ID spindle diameter: ...

Grinding diameter: 630 mm Grinding length: 2000 mm Peak height: 320 mm Table speed - without steps: 0.005-5 m / min Longitudinal table movement min./max.: 5/3350 mm Table speed: 8 m / min Grinding headstock-cross movement: 420 mm Workpiece headstock motor: 3,0 kW Grinding headstock-motor power: 22 kW Motor of the internal grinding device: 3 kW Lubricating pump motor: 0,11 kW Machine weight approx.: 15700 kg Space requirement approx.: H1970 / B3100 / L12650 mm

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4280 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5680 € : 117.58 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...

: neu : 2023 : 5543 : prompt, Zwischenverkauf v : Niederlande : 3660 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The  ...

Combination with the Grieffe Intermac Combi Table 100E (no. 23063) - Serial Number: 80029 Weight: +/- 5 tons Power: 18 kW Air pressure: 7-8 Bar Waterpressure: 1,5 bar Length mm: 5700 Width mm: 2600 Height mm: 2300 Working height: 84 cm Transport size L x W x H: 6,0 x 2,45 x 2,3 Min.-max glass size: 1760 x 3000 in mm Condition machine : Disassembled in working order Control type: CNC Electric. Connection: 63A 3P+N+PE Remaining: incl. tools Video available - for more information, please send a mail: salestecfort.nl

Code: 0198 Brand: MABO - ITALY Model: DELTA - CE Standard Belt sanding machine with double goose neck for wood, metal, aluminium, composite materials - CE Standard Table length mm 3000 Table width mm 800 Automatic table lifting - Vertical stroke mm 550 Motor 2 speeds rpm 1400/2800 - Hp 3/4 Pulley diameter mm 200 Suction motor Hp 0,5 Emergency rope Suction mouth diameter mm 120 Overall dimensions mm 4400 x 1100 x 1550 h Weight kg 420

Telescopic covers for X and Z axes for many Studer CNC grinding machines S21, S31, S33, S40 etc. And for many other machine manufacturers on request.

Sell a Hilti DAG 230-D. Sold incl. the diamond disc. The machine is in good condition, functional and tested.

PROBAT UW 801 MILL IN GOOD WORKING ORDER - SOLD WITH A PAIR OF SPARE CYLINDERS - WITHOUT ELECTRICAL CABINET - THE INSTALLED CYLINDERS ARE IN VERY GOOD CONDITION - CAPACITY: +/- 1000 K / H - PROVIDED FOR WATER COOLING (TO BE RENOVATED). IMMEDIATELY AVAILABLE

Thread Grinding Machine, Press Roller Grinding Machine OSTERWALDER RECTIMAT PR120 Grinding Length: 150 mm Grinding Wheel Diameter: 280 - 350 mm Wheel Width: 20 mm Workpiece Diameter: 65 - 120 mm Workpiece Speed: 1, 5 - 20 rpm 380 V used, tested ! Dimensions: 1500 x 1200 x 1600 mm

Stainless Steel Polishing Body Satellite for High Gloss Compacting Satellite-shaped polishing body made of stainless steel for use in polishing drums or vibrators for polishing, deburring, High-gloss compaction. Can be used for all ferrous and non-ferrous metals in vibrators, centrifugal grinders and bells or drums. The polished steel bodies are made of stainless steel. Diameter: approx. 5.22 mm Height: approx. 3.5 mm Approx. 400 kg available

Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm counters of axes are damaged ? manufacturer don?t supply spare parts Control:SIEMENS 840 C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm Made in Germany

Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm grinding flange included Made in Germany Control:SIEMENS 840C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm

Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm Size of magnet: 600x250mm Dimension of grinding wheel: ?300 x 30mm Made in Germany Control:LENZE

Control:SIENENS Sinumerik 840D Grinding lenght: 880 mm Grinding width: 430 mm Grinding height: 585 mm Size of magnet: 600x200mm Dimension of grinding wheel: ?250 ? 400 x 50 mm Speed of grinding spindle: 1500 ? 4400 rpm Spindle cooling Made in Germany

Control:SIENENS Sinumerik 840D Grinding lenght: 880 mm Grinding width: 430 mm Grinding height: 585 mm Size of magnet: 600x200mm Dimension of grinding wheel: ?250 ? 300 x 50 mm Speed of grinding spindle: 1500 ? 4400 rpm Made in Germany

Control:SIENENS Sinumerik 840D Grinding lenght: 880 mm Grinding width: 430 mm Grinding height: 585 mm Size of magnet: 600x200mm Dimension of grinding wheel: ?250 ? 400 x 50 mm Speed of grinding spindle: 1500 ? 4400 rpm grinding flange included, conture

Control:Fanuc 160 i - M axis travel range X 650 mm Y 300 mm Z 300 mm C +150?/-60? taper ISO50 dimension grinding wheel 250mm speed of grinding spindle ? 9000 rpm grinding flange included, machine has spindle cooling, dust extraction. made in Schwi