ibc horizontal used for sale

cutting diameter: 360 mm saw band length: 5000 x 34 x 1,1 mm cutting width: 640 mm cutting capacity - flat: 510 x 360 / 30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 390 x 360 /45° mm cutting capacity - round: 310 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 250 x 360 /60° mm cutting capacity - round: 310 / 60° mm cutting capacity - square: 270 x 270 / 60° mm cutting capacity - flat: 640 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1630 kg dimensions of the machine ca.: 3000 x 1200 x 2000 mm Accessories: • Inverter • hydraulical vice • automatical ...

grinding length: 1000 mm grinding width: 600 mm workpiece height: 450 mm Control: Fanuc 210i - M total power requirement: 20 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3950 x 3150 x 2550 mm CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition  ...

cutting diameter: 320 mm saw band length: 3660x27x0,9 mm cutting width: 400 mm cutting capacity - flat: 400 x 220 / 90° mm cutting capacity - round: 320 /90° mm speed: 20 - 100 m/min cutting capacity - flat: 280 x 200 / 45° mm cutting capacity - round: 280 / 45° mm sawing motor: 1,5 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: 1800 x 850 x 1200 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm total power requirement: 30 kW weight of the machine ca.: 12500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 0 mm cutting width: mm workpiece dia.: 150 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal band saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 0 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 80 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min.  ...

Capacity round maximum diameter: 335 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id    3721 MAKE         MEBA TYPE           335 DGA 1000 YEAR          2001 SPECIFICATIONS Bandsaw / Circelblade / Automat    Bandsaw Mitre  Cutting Angle L / R Degrees    Angle cutting L / R 45 / 30 Gr. Cutting capacity 90 ˚ Ø   335 mm Cuttting capacity 90 ˚ Flatt    500 x 335 mm Cutting capacity 45˚ Ø   330 mm Cuttting capacity 45 ˚ Flatt       320 x 335 mm blade dimensions    4400 x 34 x 1,1 mm roller conveyor / push up / measuring Push upCutting speed M/min      18 - 115 M/min DIMENSIONS Length   ...

: 400 kN stroke length max.: 285 mm working feed: 9 mm/sec return speed: 20 mm/sec : 660x1250 mm work height max.: 930 mm toolpiece height max.: 250 mm total power requirement: 4 kW : 200x26 mm bending capacity max. - round: 60x5,0 mm weight: 1050 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet length: 450 mm Pallet width: 450 mm Longitudinal X: 550 mm Cross Y: 510 mm Vertical Z: 500 mm Number of pallets: 0   Positions ATC: 24   CNC Brand: Fanuc CNC Model: Series 0 - MD MACH-id     3624 MAKE          Yang Eagle TYPE            SMH 450 YEAR           2000 SPECIFICATIONS X - Travel       550 mm Y - Travel       510 mm Z - Travel        500 mm Controll      Fanuc Series 0- MD Table    Length x Width    450 x 450 mm Table load in kG    350 Kg Spindle Taper   ISO 40 kW power on spindle   7.5 kW Spindle speeds / ranges    6000 Rpm ATC tool changer   24 DIMENSIONS Length    2.630 mm Width&n ...

: 300 kN stroke length max.: 235 mm : 200x24 mm bending capacity max. - round: 60x4,0 mm toolpiece height max.: 250 mm : 660x1250 mm work height max.: 900 mm return speed: 20 mm/sec working feed: 10 mm/sec total power requirement: 3 kW weight: 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity round maximum diameter: 300 mm Angle degrees maximum: 330 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat   Bandsaw automat Angle L / R Degrees   90 Gr. Cutting capacity 90 ˚ Ø   300 mm Cuttting capacity 90 ˚ Flatt  330 x 300 mm blade dimensions   4670 x 41 x 1,3 mm roller conveyor / push up / measuring AutomatCutting speed M/min  19 - 95 M/min DIMENSIONS Length   1880 mm Width   2140 mm Height   1700 mm  

: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 450 mm z-travel: 450 mm rotary table dia.: 270 mm rotary table tiltable: 0 - 24 ° spindle taper ISO: 30 spindle turning speed range: 31,5 - 7100 U/min feed speeds: 1 - 10.000 mm/min control: SINUMERIK System 8 no. of tools in magazin: 40 wotkpiece diameter with 2 vacant positions: 100 mm workpiece length: 255 mm weight of tools max.: 6 kg total power requirement: 32 kW weight of the machine ca.: 11,6 t dimensions of the machine ca.: m = 5 axis machining centre Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 16 mm x-travel: 16-200 mm table length: 1500 mm table width: 375 mm milling spindle: ISO 40 max. clampable toolpiece shaft diameter: 30 mm max. useable hobs, normal diameter: 40 mm distance between milling spindle and table: 150-250 mm axial move. of milling spindle (auto./manual): 120 mm vertical adjust. of milling slide (manual): 100 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 2,00x1,40x2,40 m K4 - TECHDETAIL UK: 0,11 kW K4 - TECHDETAIL UK: 0,6/1,1 kW K4 - TECHDETAIL UK: 3 x 0,012-0,05 mm/U K4 - TECHDETAIL UK: 16x60 mm K4 - TECHDETAIL UK: 12 x 280 - 3550 U/min K4 - TECHDETAIL UK: 0,85 kW K4 - TECHDETAIL UK: 0-2,0 mm K4 - TECHDETAIL UK: 250 mm Condition: ready for production The machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. Roughing and finishing can be done in one single clamping.  ...

Capacity round maximum diameter: 300 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id  3557 MAKE   Muller Germany TYPE   HBA 400 S YEAR   10 / 2003 SPECIFICATIONS Bandsaw / Circelblade / Automat    Bandsaw automat Angle L / R Degrees   90 Gr Cutting capacity 90 ˚ Ø   300 mm Cuttting capacity 90 ˚ Flatt   400 x 320 mm blade dimensions   4400 x 34 x 1,1 mm Cutting speed M/min15 - 105 M/min DIMENSIONS Length    1800 mm Width    2250 mm Height   1500 mm

cutting diameter: 380 mm saw band length: 5000x34x1,1 mm cutting width: 520 mm cutting capacity - flat: 520 x 350 / 90° mm cutting capacity - round: 380 /90° mm speed: 20 - 85 m/min sawing motor: 2,2 kW total power requirement: 3,1 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1800 x 850 x 1200 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 325 mm saw band length: 4380x34x1,1 mm cutting width: 450 mm cutting capacity - flat: 450 x 325 / 90° mm cutting capacity - round: 325 /90° mm speed: 20 - 100 m/min sawing motor: 2,2 kW total power requirement: 3 kW weight of the machine ca.: 1010 kg dimensions of the machine ca.: 2100 x 860 x 1500 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm cutting capacity - flat: 590 x 360 /30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 460 x 360 /45° mm cutting capacity - round: 360 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 305 x 360 /60° mm cutting capacity - round: 360 / 60° mm cutting capacity - square: 305 x 360 / 60° mm cutting capacity - flat: 700 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 0,55 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 3,7 kW weight of the machine ca.: 1460 kg dimensions of the machine ca.: 2850 x 1000 x 1850 mm Accessories: • Inverter • hydraulical vice • automatical ...

Capacity round maximum diameter: 400 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id  3509 MAKE   Kasto Germany TYPE   Twin A4 YEAR  2006 SPECIFICATIONS Bandsaw / Circelblade / Automat  Bandsaw Angle L / R Degrees   0 Gr / Straight cutting Cutting capacity 90 ˚ Ø  400 mm Cuttting capacity 90 ˚ Flatt  400 x 400 mm blade dimensions5700 x 41 x 1.3 mm Cutting speed M/min   20 - 110 M/min DIMENSIONS Length   2980 mm Width   2700 mm Height  2200 mm

cutting diameter: 280 mm saw band length: 3400 x 27 mm cutting width: 0,9 mm capacity 45 degrees: flat: 240 x 180 mm capacity 45 degrees: round: 240 mm capacity 45 degrees: square: 210 mm driver:manufacturer: 350 x 200 capacity 90 degrees: square: 280 mm speeds: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 1,5 kW total power requirement: 2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 0,9 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity round maximum diameter: 810 mm Angle degrees maximum: 480 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id   3542 MERK  Knuth Germany TYPE  HB 810 L YEAR   2008 SPECIFICATIES  Circel / Band zaagVol / Half automaat  Bandsaw Verstek zagen links en rechts ˚Graden  ANgle cutting 45 Gr .Capaciteit bij 90 ˚ Graden rond Ø  810 mm Capaciteit bij 90 ˚ Graden plat  810 x 850 mm Capaciteit bij 45 ˚ Graden rond Ø  810 mm Capaciteit bij 45 ˚ Graden plat  480 x 850 mm Zaag blad / band afmeting  8200 x 41 x 1,3 mm Zaag snelheid M/Min. 20 - 100 M/min AFMETINGEN Lengte  3900 mm Breedte  1200 mm Hoogte 3350 mm  

spindle diameter: 130 mm x-travel: 5000 mm y-travel: 3000 mm control: Heidenhain TNC 426 taper ISO: 50 P.D.B. w-axis: 900 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Right Angle Vertical Head Spindle Support Metal Way Covers Operator Platform The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 1600 mm Cross Y: 1050 mm Vertical Z: 1020 mm Number of pallets: 0   Positions ATC: 120   CNC Brand: Siemens CNC Model: 840 D SPECIFICATIONSX - Travel  1600 mm Y - Travel  1050 mm Z - Travel  1020 mm W - Travel  600 mm bed / plano / portal / moving column  HMCControll Siemens 840D Table Length x Width  1000 x 1000 mm Table load in kG  2500 Kg Spindle Taper  Bt50   kW power on spindle  30/40 kW Spindle speeds / ranges  3000 Rpm ATC tool changer  120 Coolant true spindle / Bar  20 Bar Number off controlled axis 5  

max. wheel diameter: 150 mm gear width: 300 mm max. module: 4,5 min. module: total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 4160x 34 x 1,1 mm cutting width: 450 mm : 320 mm : 320 x 320 mm capacity 90 degrees: flat: 450 x 320 mm capacity 45 degrees: round: 320 mm : 180 mm Capacity 45° rectangular: 330 x 320 mm : 160 mm : 150 mm : 150 x 150 mm capacity 60 degrees: round: 240 mm capacity 60 degrees: square: 320 x 320 mm capacity 60 degrees: flat: 230 x 220 mm speed: 20 - 100 m/min total power requirement: 2,69 kW weight of the machine ca.: 1,03 t dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged  ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 1600 mm Cross Y: 1050 mm Vertical Z: 1020 mm Number of pallets: 0   Positions ATC: 120   CNC Brand: Siemens CNC Model: 840 D SPECIFICATIONS X - Travel   1600 mm Y - Travel  1050 mm Z - Travel   1020 mm W - Travel   600 mm bed / plano / portal / moving column HMC     Controll   Siemens 840D Table Length x Width   1000 x 1000 mm Table load in   kG   2500 Kg Spindle Taper   Bt50   kW power on spindle  30/40 kW Spindle speeds / ranges  3000 Rpm ATC tool changer   120 Coolant true spindle / Bar   20 Bar Number off controlled axis  5  

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm work height max.: 690 mm Capacity 90° rectangular: 700 x 360 mm : 360 mm : 360 mm Capacity 45° rectangular: 450 x 360 mm : 360 mm : 360 mm : 590 x 360 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 3,67 kW weight of the machine ca.: 1,46 t dimensions of the machine ca.: 2850 x 1,3 x 1800 m Horizontal band saw with linear guideways, ideal for mitre cuts between 90° and +30°. Auto height adjustment sensors ensure that the bow can approach the material at high speed. The hydraulic cutting control makes the bow rise up again after a cut has been made. This process is controlled by a digital counter on the control panel. The bow angle is shown in the digital display. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 4160 mm cutting width: 610 mm : 320 x 320 mm Capacity 90° rectangular: 610 x 320 mm dimensions of saw-band: 4160 x 34 x 1,1 mm : 320 mm : 320 x 320 mm Capacity 45° rectangular: 355 x 320 mm : 280 mm : 280 mm : 280 x 280 mm capacity 60 degrees: round: 320 mm capacity 60 degrees: square: 320 x 320 mm capacity 60 degrees: flat: 510 x 320 mm speed: 20 -100 m/min total power requirement: 2,7 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,1 x 1,2 x 1,35 m Beka-Mak Lineer Sledge horizontal bandsaws have been designed to give a low cost compact and rugged machines.The bow is constructed in heavy gauge steel and mounted two chromed and grinding pillars offer a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pum ...

cutting diameter: 800 mm saw band length: 9600 mm cutting width: 1300 mm capacity 90 degrees: square: 800 x 800 mm : 1300 x 750 mm : 800 mm : 770 mm Capacity 45° rectangular: 570 x 750 mm capacity 60 degrees: round: 570 mm capacity 60 degrees: square: 770 x 770 mm capacity 60 degrees: flat: 570 x 750 mm : 800 mm : 770 mm : 1070 x 750 mm table height: 880 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 12,42 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: 5,05 x 2,2 x 2,9 m Product Description PRODUCT DESCRIPTION Two way powered mitre with NC angle setting Features ?Powered mitre setting with NC control ?Mitre cuts to +/-60 deg with +/-0.1 deg tolerance ?5-deg inclined blade for optimum cutting performance ?Hydraulic blade tensioning ?Blade deviation control with auto shut off ?Cutting feed & pressure regulation ?Material height sensor with rap ...

cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 170 mm cutting capacity - round: 250 bei 45° mm work height max.: 940 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 230 mm total power requirement: 3,0 kW weight of the machine ca.: 665 kg dimensions of the machine ca.: 2660 x 204 x 2060 mm Description: The ARG 330 F. is a robust manual metal band saw with high cutting accuracy for medium to heavy workpieces! Your exceptionally compact design, as well as its massive saw frame made of gray cast iron are ideally suited for use in workshops and production facilities. The The basic equipment of the machine enables the processing of a wide variety of different materials, including stainless and tool steels. With With this machine, miter cuts ar ...

cutting diameter: 90° / 810 mm saw band length: 8200 mm cutting width: 850 mm : 810 x 810 mm : 850 x 810 mm : 480 mm : 480 x 480 mm Capacity 45° rectangular: 480 x 810 mm table height: 585 mm cutting speed: 20 - 100 m/min dimensions of saw-band: 8200 x 41 x 1,3 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 5,5 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3,9 x 1,2 x 2,35 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. ?inverter ?hydromechan ...

closing pressure: 5980 kN clamping plate: . mm distance between columns: . mm total power requirement: kW weight of the machine ca.: 22,5 t dimensions of the machine ca.: m Spraying machine Manufacturer Acheson, Model DAG 1000 FCT S-B AB, Year of construction 2001, Foundry robot Manufacturer ABB, Model IRB 440F / 45, Control S4C-Plus, Year of construction 2004, trimming Manufacturer rice, Model SEP 7-20, An oven can optionally be purchased Manufacturer Westofen, Model W 80, Capacity 800 kg, Built in 1985 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2500 mm y-travel: 2100 mm spindle taper ISO: 50 spindle turning speed range: 5-1000 U/min spindle travel: 900 mm Radial face slide: 650 mm radial face slide travel: 250 mm angular milling head: rotary table:: table surface area: 2000x2500 mm table height: 800 mm table travel: 1700 mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Table, Floorplate, tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mm saw band length: 0 mm cutting width: 0 mm total power requirement: kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 6000 mm y-travel: 2000 mm Plate area: 9000x6000 mm digital readout: AEG total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2500 mm y-travel: 1900 mm w-axis: 1100 mm radial face slide travel: mm rotary table:: 1800x1300 mm table adjustable: 1000 mm digital readout: Pfillips workpiece: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 510 mm z-travel: 510 mm Control: Mazatrol M 32 size of pallet: 500x500 mm spindle taper ISO: 40 turning speeds: 50-10000 U/min Spindle capacity: 7,35 KW tool magazin:: 60 Cooling through the spindle: bar numbers of pallets: 6 total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10500 mm y-travel: 1200 mm z-travel: 1600 mm control: Heidenhain TNC 426-CA taper ISO: 50 P.D.B. Table dimensions: 1100 x 12000 mm spindle speeds: 20 - 2000 mm voltage: 380 V total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 4000 mm y-travel: 2500 mm z-travel: 7000 mm taper ISO: ISO 50 P.D.B. total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 800 mm z-travel: 5000 mm control: Siemens tool adaptor: ISO 50 number of spindle speeds: 285-3000 voltage: 380 V total power requirement: 36 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions 2x workpiece holders with (2x) hydraulic support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 205 mm x-travel: 10000 mm y-travel: 2500 mm w-axis: 500 mm spindle travel: 1250 mm Control: Heidenhain type: TNC 355 spindle taper ISO: 50 transmission ratio: 2 feed - independent: 0-3000 mm spindle motor: 37 kW total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: 14,1x3,2x5,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 25,4 x 0,9 mm weight of the machine ca.: 0,4 t Dimensions (LxWxH): 1,5 x 0,9 x 1,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.