We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,888 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Clamping plate dimensions: 830x770mm, distance between tie-bars: 560x500mm, ejector stroke: 200mm, screw diameter: 60mm, injection pressure: 1778bar, weight: 11.1t, with handling.
used
Injection pressure: 2057bar, clamping force: 3500kN, heating output: 30.7kW, weight: 16.4t, operational hours counter: 62,600h.
used
Clamping force: 750kN, injection pressure: 1730bar, motor power: 15kW, stroke volume: 116cm³, operational hours counter: 19,802h, with tools.
used
Clamping force: 750kN, opening stroke: 40kN, connected load: 18.5kW, weight: 7.5t.
used
Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation.
used
With documentation, the machine should be tested.
used
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.
used
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.
used
Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation.
used
Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.
used
Connected load: 42kW.
used
Connected load: 40kVA.
used
Hydraulic operating pressure: 275bar, weight: 4.1t.
used
Closing force: 550kN, opening stroke: 400mm, mould height: 250-650mm, column distance: 360x335mm, max. ejector stroke: 80mm, table dimensions: 565x540mm, max. tool weight: 600kg, screw diameter: 38mm, controls: Procan MD, length: 3250mm, width: 1140mm, height: 2040mm, weight: 2.25t, operational hours counter: 29,664h, with robot interface.
used
Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021.
used
Closing force: 1550kN, distance between tie-bars: 500x500mm, plate dimensions: 750x750mm, tool opening path: 650mm.
used
Single-station machine for containers up to 5 ltr. Extruder 60/24D. ERinfachkopf W. Müller type S1/90. Nozzle up to 90 mm. Prpoprtional control for wagons / shape / calibration. Item removal. Mould dimensions: L 400/450 mm, W 350 mm, D 2 x 130 mm. Mould opening variable. PLC control
used
Hydraulic pressure: 210bar, weight: 3.1t.
used
Hydraulic pressure: 210bar, weight: 3.7t.
used
Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible.
used
Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.
used
There are two identical injection moulding machines available, closing force: 1750kN, screw diameter: 70mm, stroke volume: 690cm³, opening stroke: 1000mm, installation height: 350mm, weight: 10.5t, an inspection is possible.
used
Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.
used
Weight: 9.1t, the machine is leaking and the control card is missing.
used
Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.
used
Operational hours counter: 59,129h, with Handling PSA 2080.
used
Operational pressure: 210bar, weight: 4t, with documentation, without accessories.
used
Injection pressure: 2057bar, closing force: 2750kN, stroke volume: 1213cm³, heating output: 30.7kW, length: 8425mm, height: 2545mm, weight: 14t, operational hours counter: 5002h.
used
Clamping force: 2000kN, drive power: 37kW, injection volume: 377cm³, melt pressure: 1600bar. Screw diameter: 50mm, control: MC4 32-bit microprocessor control, nozzle type: R 15. Dimensions X/Y/Z: approx. 5160mm/1900mm/2240mm, weight: approx. 10000kg. Without oil filling and material conveyor/material hopper. Available from August, 2024. Documentation available. On-site inspection is possible.
used
Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.
used
There are two Injection Moulding Machines Demag Ergotech System 250/630-1450 available, clamping force 250t, clear tie bar width: 630mm, operating pressure: 190bar, weight: 13.1t, year of construction machine 1/ 2: 2001/ 2006, with documentation, an inspection is possible.
used
Clamping force: 250kN, heating output: 4.2kW, connected load: 15.2kW, weight: 2.1t, operational hours counter: 72.811h, with documentation, without accessories.
used
Clamping force: 250kN, heating output: 2.7kW, connected load: 69kW, operational hours counter: 97,696h, with documentation, without accessories, the hydraulic control valve is defective on the closing side.
used
Operational hours counter: 62,699h, with documentation, without accessories.
used
Operational hours counter: 85,318h, with documentation, without accessories.
used
Clamping force: 500kN, heating output: 9.4kW, connected load: 24.5kW, weight: 3.5t, operational hours counter: 68,747h, with documentation, without accessories.
used
Connected load: 86kW, operational hours counter: 58,952h, with documentation, without accessories.
used
Connected load: 51kW, operational hours counter: 72.552h, with documentation, without accessories.
used
Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.
used
There are two Ferromatik Milacron K-TEC 250 available, clamping force: 2500kN, injection pressure: 2258bar, stroke volume: 441cm³, engine power: 55kW, weight: 16.5t, operating hours of machine 1: 84,365h, on-site inspection is possible, without accessories.
used
Blowing moulding machine SIPA 4 cavities • Year: 1998. • Speed: 4.000 bph. • Model: SF 8/4. • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections.
used
Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.
used
Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- 600g, screw diameter: 55mm, L/D20, with 2x core puller hydraulic 1-fold, 2x core puller pneumatic, 1-fold mold temperature control, standard up to 90°C, an on-site inspection is possible.
used
Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible.
used
Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm.
used
max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg.
used
Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. Operating hours: 83111 (as of: 14.04.2021). Buyer must provide oil filling after purchase. Material conveyor not included. Available from 30.07.2024. Documentation available. On-site inspection is possible.
used
Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.
used
Platen dimensions: 1700x1250mm, with documentation, an inspection is possible.
used
Description COMPLETE ISLAND DIMENSIONS 7800 X 4000 X H4300 Press with second lateral injection press with rotary table thickness 166mm mold heating 12 zones Integrated Cartesian robot MULTILIFT V 15Kg Year 2011 X axis: 900 mm Y axis: 1400 mm Z axis: 3200 mm Motors: brushless B axis; not present C axis rotation: 90° Max load: 11 kg Interface integrated into the press