We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,375 used machines on RESALE, but how to find them? Machine Search
used
pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Punching capacity: 25 t plate thickness: 10 mm no. of strokes: 120 Hub/min punch diameter: 105 mm positioning accuracy: 0,1 mm weight of the machine ca.: 1.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 80 t throat: 295 mm stroke: 14-150 mm no. of strokes: 34-85 Hub/min ram - range of adjustment: 85 mm table surface area: 900x580 mm table height: 850 mm hole in the table: Ø180 mm ram surface: 560x380 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: BxTxH 1800x1850x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 50 t throat: 230 mm stroke: 12-110 mm no. of strokes: 40-100 Hub/min ram - range of adjustment: 70 mm table surface area: 740x440 mm table height: 840 mm hole in the table: Ø 140 mm ram surface: 460x300 mm tool hole in ram: Ø 45 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: BxTxH 1500x2500x2510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 85 Hub/min ram - range of adjustment: 60 mm table surface area: 820x530 mm ram surface: 260x210 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 125 t throat: 360 mm stroke: 20 - 130 mm table surface area: 920 x 690 mm ram surface: 580 x 400 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm hole in the table: 200 mm tool hole in ram: 50 mm daylight (stroke down, ram adjustment above): 500 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: B 1,32 x T 1,8 x H 2,82 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table surface area: 700 x 270 mm taper in main spindle: ISO 40 turning speeds: 8: 150 - 1660 U/min turning speed range - horizontal: 8. 110 - 1230 U/min feeds: 8: 25 - 285 mm/min weight: 900 kg quill stroke: 60 mm total power requirement: 3,7 kW range L-W-H: 1,3 x 1,38 x 1,65 m Condition: ready for operation: Video available on our website.: CE signed: Electric 380 Volt: Cooloing pump: Digital readout 2 axis: x+y / Digidata KNT 7000 Fixed working table: Vertical milling head swivelling +quill adjustment: chip pan: Swiveling table: 600 x 250 mm Slotting head: Hub 80 mm Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes ...
used
pressure: 63 t throat: mm stroke: 8 - 120 mm no. of strokes: 135 Hub/min max. distance table - ram: 560 mm ram adjustment: 70 mm table surface area: 800 x 600 mm ram surface: 500 x 400 mm total power requirement: 12 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 1500 t daylight: 5060 mm mould space: - mm table surface area: 5000 x 2700 mm main drive: 90 kW max. ram stroke: 800 mm ram adjustment: 600 mm no. of strokes: 10 Hub/min ram head dimension: 5000 x 2700 mm die cushion stroke: 200 mm die cushion: to total power requirement: kW weight of the machine ca.: t MECHANICAL PRESS - Distance between clamping plate and ram with stroke at bottom, adjustment at top: 1600 mm - Compressed air pulling device in the table -- stroke 200mm - Ejector in ram -- Stroke 150mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 1600 t stroke: 300 mm dayligth: - mm ram adjustment: 8 mm table-size: 1500 x 1200 mm ram surface: 1320 x 1180 mm ram strokes: 75 Hub/min Shut Height: 800 mm main drive: 132 kW total power requirement: - kW dimensions of the machine ca.: - m total wight: - t Slide Knockout - 1st stage: 5 ton - 2, 3, 4 stage:15 ton each - Knockout Stroke: 40 mm Bottom Knockout - 1st & 4th stage: 5 ton - 2nd & 3rd stage: 20 ton - Stroke: 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 2500 t stroke: 360 mm dayligth: - mm ram adjustment: 8 mm table-size: 1500 x 1400 mm ram surface: 1400 x 1400 mm ram strokes: 70 Hub/min Shut Height: 1000 mm main drive: 190 kW total power requirement: - kW dimensions of the machine ca.: - m total wight: - t 2500 ton Sumitomo hot forging press together with a 150 ton Komatsu OBS press - Model: OBS-150 - Capacity: 150 ton - Stroke: 200 mm - SPM: 256 - 50 - Slide Plate: 700 x 650 mm - Bed: 1250 x 780 mm - Die Height: 420 mm - Adjust: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Rail wheel, flanged wheel, roller, track wheel, wagon wheel -Roller: smooth design, without bearings -Wheel: Ø 290 mm -Width: 75mm -Hub: Ø 28 x 70 mm -Number: 4x wheel available -Price per piece -Total dimensions: Ø 290 x 75 mm -Weight: 8.6 kg/pc.
used
Rail wheel, flanged wheel, track roller, track wheel, wagon wheel -Roller: with angular groove, without bearing -wheel: Ø tot. 218mm -Groove width: 55 mm -Hub: Ø 45 x 52 mm -Number: 3x wheel available -Price per piece -Total dimensions: Ø218 x 87 mm -Weight: 9.9 kg/pc.
used
Average output 800-1200 kg/h depending on materials and moisture DIAGONAL LOADING BELT Steel structure, side walls,PVC anti-slip belt,1,4 kw motor, Dimensions: 850×6000 mm. AGGLOMERATOR D1300 Steel barrel diameter 1300 mm. Main motor 250 kw (available with 300 kw motor on request) Replaceable inner steel lining Side door for inspection and blades replacement, Sucking vent for steam extraction Oleodynamic power station 0,75 kw with electrovalve which controls opening of unloading door.water loop cycle for cooling hub bearings belt. Electrical cabinet Dimensions: L mm.3950, W.mm.2.280, H. mm.4652. DISCHARGING HOPPER Diagonal, engine moved auger for material extraction (1,1 kw) Discharging height 830 mm from ground Depressure pipe inspection window safety inner grid Appx dimensions : 1000×1500 mm. Auger diam.180 mm. The line is offered reconditioned. Complete with electrical drawings and ...
used
Max. wheel diameter 420 mm gear width 120 mm Max. module 8 Min. module 0,5 control BWO CNC yes. of strokes 32-800 Hub/min total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5.3 x 3.9 x 3.4 m
new
sheet width: 2100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 11 Stk no. of strokes: 28 Hub/min oil volume: 150 l total power requirement: 11 kW dimensions of the machine ca.: 3010 x 2100 x 1640 mm weight: 4500 kg Available from stock -------------------------------------------------- --------- electrical / hydraulic CNC swing cutting shear with CYBELEC CNC touch screen control with electric / hydr. Cutting gap adjustment -------------------------------------------------- --------- Furnishing: - CNC electrical / hydraulic swing cutting shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material selection, including sheet thickness Cutting line lighting - motorized back gauge, travel = 1,000 mm (X axis) on ball screws automatic Can be ...
new
sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm throat: 350 mm cutting angle: 0,5 - 1,5 ° down holder: 14 Stk no. of strokes: 16 - 24 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4100 x 2200 x 2190 mm weight of the machine ca.: 7060 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up a ...
used
pressure: 100 t throat: 370 mm stroke: 10 - 140 mm no. of strokes: 58 Hub/min ram adjustment: 80 mm table surface area: 900 x 670 mm ram surface: 410 x 430 mm table height: 760 mm tool hole in ram: 65 mm toolpiece height max.: 450 mm weight of the machine ca.: 6 t pneumatic clutch-brake combination Mechanical fracture plate in the ram Two-hand operation Foot control UVV until 03/2023 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Vollgatter Wurster Dietz GDZ71 durchla 710mm hub 600mm Motor 70kw Spanwagen hilfswagen Spaltkeil rollerngang
used
pressure: 125 t plate thickness: 2 mm no. of strokes: 100-1000 Hub/min Control: Bruderer total power requirement: 50 kW weight of the machine ca.: 23 t dimensions of the machine ca.: ca. B 3 x L 6 x H2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 25 t plate thickness: 4 mm no. of strokes: 60-160 Hub/min total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Price EXW loaded for free on suitable transport. Very friendly EU transportation cost. Please Details: Jones and Shipman 1310 universal, precision ID/OD grinder, high accuracy, suitable for precision engineering and gauges. We are using it for parts adjustments in our workshop. In very good original condition, from 1st owner (We are the second but we are using only a few hour a week, and keep it clean and tidy) I has almost all accessories, even those are not normally supplied with used or new grinder. See photos please. Jones and Shipman is a high quality, top workmanship, universal, reliable, well designed and done, Easy to operate, precision machine for fine and complex jobs. The machine has universal wheelhead, adjstable to any angles required. The machine is very quiet, has precise semi automatic feed mechanism. Metric machine. We do not know the year of machine but it h ...
used
ram hammer weight: 26 kg ram hammer stroke: 200 mm type: KO : 596 no. of strokes: 220 Hub/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 3100 mm plate thickness: 10.0 mm thickness at Niro-steel: 6.0 mm cutting angle: 2.0 ° down holder: 14 Stück no. of strokes: 13 - 18 Hub/min back stop - adjustable: 1000 mm Control: ELGO P40T column arm: 250 mm oil volume: 265 l engine output: 22,0 kW weight: 9600 kg range L-W-H: 4700 x 2300 x 2200 mm New price from 56.000 euros Special price on request Furnishing: - electro-hydraulic sheet metal plate shears oscillating cut - ELGO NC control - model P40T Touch, front left control panel - CNC electro-motorized back gauge, with ball screws including retraction function selectable Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSL ...
new
sheet width: 3100 mm plate thickness: 10 mm rear stop: 1000 mm throat: 350 mm cutting angle: 2,0 ° down holder: 14 Stk no. of strokes: 13 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 4050 x 2500 x 2170 mm weight of the machine ca.: 10575 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.tra ...
used
pressure: 35 t throat: 230 mm stroke: 12-84 mm no. of strokes: 135 Hub/min ram - range of adjustment: 70 mm table surface area: 600x460 mm ram surface: 340x170 mm hole in the table: 220x130 mm table height: 800 mm tool hole in ram: Ø 35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1800x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 3050 mm plate thickness: 12,0 mm ST plate thickness: 8,0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0,5 - 3,0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Number of working hours: 18.822 h total power requirement: 22,5 kW weight: 8.500 kg range L-W-H: 4180 x 2030 x 2210 mm Furnishing: - Robust hydraulic, link-guided guillotine shears - Electro-motor backgauge with analogue display Fine adjustment via hand wheel, front left - Control panel, front left - manual cutting gap adjustment, from behind - electro-hydraulic cutting angle adjustment - Front finger protection - Stable front support table - 1x side stop with T-slot and millimeter scale - 3x support arms - 1x free moving footswitch - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325234 The data for this ad was c ...
used
sheet width: 3100 mm plate thickness: 4 mm distance between columns: 3170 mm back stop - adjustable: 650 mm down holder: 11 Stück cutting angle: 1,5 ° no. of strokes: 30 Hub/min table height: 750 mm total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of machine L x W x H: 3,60 x 1,50 x 1,40 m Accessories: electr. back stop, angle front stop, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 1250 mm plate thickness: 16.0 mm thickness at Niro-steel: 10,0 mm blade length: 1300 mm cutting angle: 2-3 Grad no. of strokes: 13 Hub/min back stop - adjustable: 500 mm Control: konv. table height: 810 mm blade length: 1300 mm oil volume: 350 l engine output: 18.5 kW weight: 3900 kg range L-W-H: 2150 x 1200 x 1900 mm Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - hydraulic cutting angle adjust ...
used
plate thickness: 6.5 mm thickness at Niro-steel: 5.0 mm angle adjustable from - to: 30 - 140 Grad no. of strokes: ca. 50 Hub/min table:: 950 x 1030 mm blade length: 220 x 220 mm total power requirement: 4.0 kW weight: 800 kg range L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros Special price on request Furnishing: - electro-hydraulic notching machine - Multi-functional machine with 2x workstations 1x notching, 1x bending station including bending tools - manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment - large / stable work table - 2x angle stop, adjustable - automatic cutting gap adjustment - freely movable foot switch - Connection cable + 16A plug - Cutting performance: 6.0 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -93970 ...
used
pressure: 63 t throat: 315 mm stroke: 16 - 125 mm max. distance table - ram: 417 mm ram adjustment: 70 mm no. of strokes: 80 Hub/min table surface area: 800 x 630 mm ram surface: 500 x 400 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 1,5 x 2,2 x 2,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 195 x 210 mm ram hole: 40 H7 mm hole in the table: 250 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t throat: 315 mm stroke: 8 - 120 mm table surface area: 630 x 800 mm dayligth: 560 mm ram adjustment: 70 mm no. of strokes: 56/90 Hub/min ram surface: 400 x 500 mm total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 1,5 x 2,2 x 2,75 m The following work is/was carried out on the machine. partial overhaul: - Machine is completely disassembled, checked - Machine is repainted - new press safety valve - New separate control cabinet with touch panel and ABB safety control - new shaft bearing - A current UVV test and braking time measurement is carried out before delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 75 t throat: 290 mm stroke: 12 - 100 mm ram adjustment: 80 mm no. of strokes: 140 Hub/min table surface area: 830 x 560 mm ram surface: 630 x 300 mm total power requirement: kW weight of the machine ca.: 6,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 30.0 t punching cross-cut in cmm: 30 in 9.0 mm stroke: 0 - 28.0 mm column arm: 610 mm work height max.: 1010 mm no. of strokes: ca. 35 Hub/min oil volume: 35.0 l punching cross-cut in cmm: 270 mm² total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel Machine link: https://mhp.logotech.de ...
used
pressure: 100 t stroke: 10-130 mm no. of strokes: 30-90 Hub/min throat: 330 mm ram - range of adjustment: 100 mm table surface area: 950x660 mm ram surface: 540x440 mm hole in the table: Ø 230 mm table height: 1000 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Paper drill Dürselen Corta PB 04 N; good condition; cleaned and tested; 4 drill heads; drilling lubrication and cooling; Impulse lubrication for highly adhesive products; speed control; Speed table lift adjustable; Max. Stack height 50mm; Insertion depth behind drill 42mm; sliding table; Hole spacing 31.7-293mm; optionally with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; internal drill bit impulse lubrication for sticky materials; speed adjustable; table hub speed; max.pile hight 50mm; Depht Behind Drillers 42mm; sliding table; hole distance 31.7-293mm; for oiption with 7x Filofax drilling head.
used
sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 2,0 ° no. of strokes: 15 Hub/min back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm from a maintenance workshop (vehicle construction) maintained condition () New price ~ 41.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back ...
used
sheet width: 3190 mm plate thickness: 6 mm distance between columns: 3250 mm cutting angle: 1,2 ° no. of strokes: 32-75 Hub/min column arm: 100 mm back stop - adjustable: 5-1000 mm table height: 800 mm oil volume: 150 l total power requirement: 15 kW weight of the machine ca.: 6200 kg dimensions of the machine ca.: 3500x2000x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 80 t stroke: 8-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 100 mm table surface area: 900x625 mm ram surface: 600x280 mm hole in the table: Ø 150 mm table height: 1000 mm tool hole in ram: Ø 40 mm : 490 mm weight of the machine ca.: 7 t dimensions of the machine ca.: BxTxH 1800x2200x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. ram stroke: 2 - 300 mm groove width: 2 - 32 mm power capacity: 8 kW no. of strokes: 2 - 300 Hub/min throat: ca. 300 mm Max. installation height: ca. 450 mm automatic feeds: 0,01 - 0,15 mm work speed: 0 - 30 m/min return speed: 30 m/min weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,5 x 1,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 600 t stroke: 300 mm no. of strokes: 20 - 35 Hub/min hole in the table: 1500 x 600 mm table-size: 3000 x 1400 mm ram adjustment: 0 - 120 mm number of connecting rods: 2 Stück table surface area: 3000 x 1400 mm dimension of ram: 3000 x 1300 mm control: Simpac total power requirement: 36 KVA weight of the machine ca.: 105 t required space: 10 x 2 x 5 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.