ht tunnel used for sale

Used Complete Bottling Line for PET and Glass 2007 Depalletizer This unit takes bulk of bottles that are stacked on a pallet and places them onto an accumulation area before entering the Lowerator unit The operation of the machine is manual There are some forklift interactions with loading full pallets onto the infeed conveyor removing the empty pallets from the discharge conveyor and the placement of empty pallets at the operator level layer dividers Cleaning is carried out with the machine switched off and the hoist lowered Bottle Lowerator The Lowerator transfer the bottles from the Depalletiser operator level to the lower level Rinser before entering the Filler This unit is used for glass bottles only and can be mechanically adjusted easily depending on different bottle dimensions Gripper Rinser Bottle Rinser provides an excellent way to fully clean the bottles The bottle rinser is u ...

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Webomatic Shrinking and Drying Line consisting of the Webomatic STCW 60/80-L-E Shrink Tunnel and the Webomatic DU 60-L Drying Tunnel. Webomatic STCW 60/80-L-E Shrink Tunnel: This shrink tunnel boasts unique design details, ensuring impeccable shrinking results along your production line. Specifications: Model: STCW 60/80-L-E Max. Product Dimensions: 550×300 mm Max. Product Weight: 70 kg Power: 3PH / 400V / 50Hz / 45kW Machine Dimensions (LxWxH): 1,253x886x1,442 mm Machine Weight: 500 kg Webomatic DU 60-L Drying Tunnel: The DU drying unit delicately dries shrink packs, prepping them seamlessly for subsequent stages like weighing, labeling, and cartoning. Specifications: Model: DU 60-L Max. Product Dimensions: 550×270 mm Max. Product Weight: 70 kg Drying Capacity: 11,100 m3/h Power: 3PH / 400V / 50Hz / 7kW Machine Dimensions (LxWxH): 1,600×1,253×1,442 mm Machine W ...

1 banding machine with shrink tunnel Manufacturer: Urban Maschinenbau GmbH, Germany Type: SB 500 Fully automatic linear banding system to different types of products in groups and stacked high with shrink wrap to package. The banding system works with two film roles, cross sealed. Product feed with motorized infeed conveyor, linear Motorized film reel (top and bottom) Sealing and cutting through hot clamping with electronic temperature control Control Panel for easy control of all machine functions Direction of rotation of the machine: from left to right Ventilated electric cabinet Formats / products: Length: 200 mm Width: 180 mm Height: 210 mm Capacity: up to 2,400 products / h, depending on the product integrated heat shrink tunnel Tunnel width: 500 mm / tunnel height: 220 mm Electr. Supply: 380 V, 50 Hz Dimensions: approx. 2.5 x 2.0 x 1.8 m Weig ...

LIQUIDATION of washing machine of boxes and trays. Its condition is completely renovated, revised and guaranteed. Tunnel for washing trays or boxes, production 400/600 units / h. Manufacturer by INDUSTRIAL WASHING MACHINES LTD model CRUSADER 600. The tunnel is calculated and designed for a production of 400/600 ud / h, the water is heated by oil heating system, its washing phase with hot and soapy water, and its rinsing with mains water make its finish optimal. PROCESS Washing in closed circuit with hot soapy water. Rinsing with mains water. GENERAL CHARACTERISTICS Construction in stainless steel AISI 304. Tunnel dimensions: Length: 3,500 mm Width: 1,400 mm Height: 2030 mm Loading mouth 570 x 280 mm high (max. trays 600 x 400 x 280 mm). Loading height of 1,000 mm. Upper body with side hinges for registration and rounded shapes to facilitate sanitation and avoid water cross ...

IMA SHRINKWRAPPER, MODEL MS450EA-T450 Year of construction: 2006 Automatic machine with alternating movements operating with reels of shrinkable film. The packages obtained are subsequently heat-shrunk by the tunnel placed at the exit of the shrinkwrapper. The machine is designed to pack single or bundled cases or products in pre-glued cartons or trays of standardized dimensions. TECHNICAL DATA Net weight: Kg 1500 Length: mm 3100 Width: mm 2100 Height: mm 1980 Production characteristics: Shutter conveyor belt dim. (LxW): 1760 x 110 mm Polyurethan conveyor belt dim. (LxW): 540 x 280 mm Tunnel dimension (LxWxH): 1500 x 1000 x 1720 mm Tunnel conveyor belt dim. (LxW): 1300 x 500 mm The product coming from the upstream line enters the belt that accompanies it up to the level layering area. The bundle, pushed forward, causes the unwinding of the film from the two reels and ...

1 fully automatic film multi-shrink system With 2 identical Meurer films individual packaging Shrinkage systems. Shriveled 200 ml packages are placed in 5-er or 2 x 5-rods of the Meurer carton manufacturing and Packaging line fed and in 10 or 20 individual packaging packaged. Achievement: The inflow from the 2 single shrink plants to the Meurer carton packaging machine was 22,500 : 5 = 4,500 pieces of 5-piece individual packaging rods with 200 ml Tetrapack base Packaging Manufacturer Meurer Type: CM/BK 45 T80 Machine No. 861.5005.0199 Year of construction 2006 2 Meurer shrink systems with side-mounted 2 film roll unwinding lines per machine to change a film roll at to be able to carry out ongoing operation a.) 1 fully automatic film multi-shrink system Manufacturer Meurer Type: CM/BK 40 T80 Machine No. 861.004.0199 Year of construction 1999 Inlet height ...

Used machine for the application and sealing of shrink sleeve labels. Manufacturer PDC Europe SAS. New 2007. The machine consists of: 1. shrink sleeve label applicator PDC100BEM , 2.5 kW. The sleeve applicator is an automatic unit designed to apply neutral or printed PVC and/or PET sleeves. The process of making and setting the sleevs takes place in five working zones: The spool is supported and unwound up to the opening tetrahedron, The roll of sleev is opened and then directed to the cutting zone where it is cut to length. The sleeve is moved from the cutting zone to the ejector by means of a feeder. The product to be labelled is fed underneath the ejector, positioned underneath it precisely and moved on. The Sleeve is placed on the product using the ejector. Estimated weight of applicator: approx. 300 kg. 2. heating tunnel TAR1500-III for heat-shrinkable labels. Output 19 ...

Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. One will be free in June, one in October Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999

PicoPac VM405 shell seal device for Assietten menu trays incl. heat tunnel NHG801 Sealers with two-hand control Operating the device without guard sewn-on prevents safety device on the protective cover of the press Allows remove fast and tool-less quick change facility of the pressing frame of all parts to clean the device E.g. Heating tunnel is equipped with propane gas burner (supplied with pressure reducer, but without gas cylinder) Burner has a pilot flame burner with brief interruptions to, turn back completely, and then again turn on without again having to light Adjustable chain belt speed Heating tunnel is height-adjustable and suitable for the connection to other devices Both devices must be cleaned thoroughly before operating, because dirty

"PAWERT" SPM I-90/200 Manufactoring in 1992, reconditioned in 2016 Mechanical single head crank-type Briquette Press for continuous Heavy Duty operation. - Capacity: 2,650 Lbs/Hr (1,200 kg/Hr) depending on raw material quality. Briquette dimensions: 3-1/2" (90 mm) dia.; 3/4" to 11-3/4" (20 - 300 mm) length. Main drive: 75 HP (55 kW installed). High quality welded steel construction. Belt driven flywheel drive. Pre-Heated oil Chamber. This press has (200) press strokes per minute forcing the material through an extrusion chamber to produce uniform material at a high pressure; significantly reducing the volume from of chips/dust to a densified log. This line also has: fully automatic cutting saw control box. < Conveyor Belt. KALLFASS UNIVERSAL Type "600" Shrink Tunnel for packaging. The PAWERT Press was reconditioned in 2016 This is a complete line. it just needs the ...

The machine is designed to pack products individually, or in batches. OPERATION: After positioning the film on the reel unwinder and adjusting the work table according to the size of the product, the operator manually introduces the product into the film and transfers it to the welding frame. Once welding, the product is evacuated into the shrink tunnel through an ejection mat to retract the film. TECHNICAL: - Model: MATRIX - Power: 10 kW - Weight: 340 kg - Maximum height of the product: 180mm. - Height adjustable welding conveyor. - Pneumatic descent of the welding frame. - Control by push button, or pedal, or cycled operation. - Ejection mat with fixed speed of 7.6 m/min. - Metal mesh tunnel belt with variable speed from 3 to 10 m/min. - Electronic regulator-controlled pulse welding. - Welding blade in high position. - Tunnel temperature regulated by electronic th ...

Kallfass Universa 5050 Sprint, technical data: Welding frame dimensions: 500 x 500 mm Foil: Half tubular film, approx. 12 - 80 μm Foil roll outer diameter: max. 400 mm Film roll core diameter: approx. 76 mm Film roll width: max. 600 mm Working height: 850 - 915 mm Conveyor belt speed: infinitely variable Welding system: welding punch with wedge or profile shape continuous heating, temperature control and monitoring by PLC, specially coated, maintenance-free, completely odourless working Welding frame passage height: 110 mm as standard Power connection: 400 volt three-phase current, 50 Hz with protective earth Rated power: 3.5 kW Rated current: 5.1 A Control cabinet position: in working direction right Compressed air connection: 6 bar Compressed air consumption: 14 l/stroke Finish: Kallfass anthracite Kallfass Compact 650S, technical data: Tunnel passage width: ...

automatic, angle welder CMW/AL 80/60 with shrink tunnel CMS 60 - used - : Prices from location: 5.950.-€ (net) Manufacturer: Meurer Automatic angle welder CMW/AL 80/60 with shrink tunnel CMS 60 Year of construction 1996 Machine No.: 4.0514.04.96 Type plate shrink tunnel: Type: CMS 60 Angle welders: CMW/AL 80/60 The product may have the following maximum dimensions: 80 cm x 60 cm x 20 cm height. Output: Average 3000 pieces/hour The first part of the machine welds the film and the second part (the shrink tunel) makes the film smooth. Depending on the characteristic and size of the items, you can adjust the speed, quality of the welding and smoothness of the film. The control module and placed over the infeed belt (left part of the machine). Condition: good, but existing errors: Film processing must be accompanied manually because a spare part for automation is not av ...

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...

Kallfass Universa 400 with shrink tunnel, SlipTorque roller belt and conveyor belt Kallfass Universa 400 built in 2005 The system is immediately available. The price of the complete system includes the Universa 400, the Schlichter shrink tunnel, a SlipTorque roller belt and a conveyor belt. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Metronic embossing system - Control: Siemens S7-300 - Siemens Touch TP277 operator terminal - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel-knife system - Processable films PE and PO - Year of construction 2005 - Simple shrink tunnel DS-600 with switchable rotating bars - Conveyor belt 1000 x 400mm - SlipTorque roller conveyor 2 ...

Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulating blower Cooling fans 2 x control heater 1 x basic heating 1 x auxiliary heater with chain transport Metrics Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm More items - new and used - can be found in our shop! International shipping costs on request!

ID2788 Normet Injection & swap body for maintenance Normet undercarriage NT60 (generally revised), with 2 swap bodies (for injections with cement silo body (generally overhauled) & swap body for maintenance in the tunnel (new) (i.e. the swap body "maintenance unit" is necessary for supplying and maintaining the equipment, e.g. in tunnel construction. These are included Oil barrels, a 1000 liter diesel tank, an emergency generator, a workshop compressor and hose fittings, like at the gas station to fill up the devices with diesel or to refill oil). The maintenance unit is brand new and built as a swap body. Standardet undercarriage NT60 (completely overhauled), with 2 swap bodies (for injections with cement silo superstructure (refurbished) & interchangeable body for maintenance in tunnels (new) (i.e. the swap body "maintenance unit" is necessary for the supply and maintenance of the e ...

Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 2TM Year 2010 - Serial-No. KN 096776 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Shrinking tunnel with conveyor Film carriage on rails Dimensions of tunnel arc 544 x 387 x H 190mm Overall dimensions 1900 x 900 x Ht 1300mm Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect In production - Can be test

Packing machine and heating tunnel - automatic line adapted to packing 1.5 liter PET bottles in 3x2 packages The semi-automatic packaging unit consists of a packing machine and a heating tunnel, intended for packaging in collective packages - PET bottles, jars, cartons, cans, wraps in foil, seals and shrinks in a heating tunnel. Automatic packing machine, welding machine BAT FORUM STM 50x40 / 3RDKx2 - model: BAT FORUM STM 50x40 / 3RDKx2 - year of production: 2004 - max dimensions of the packed product: 1800 mm x 1750 mm - max height of the packed product: 3000 mm - efficiency: 30 welds per minute - installed power: 35KW (operating power: from 10KW to 15KW) - power supply: 380V, 50Hz Efficiency: 30 packets per minute Engines: 2 conveyors - power - 0.37 kW - Type: STKg 63X - 2 cs1, rpm - 2780 Film reel, 4 pcs: (top and bottom) - power - 0.25kW - TYPE - stkG 63X - 4CS1, rpm.  ...

Packing machine and heating tunnel - automatic line adapted to packing 1.5 liter PET bottles in 3x2 packages The semi-automatic packaging unit consists of a packing machine and a heating tunnel, intended for packaging in collective packages - PET bottles, jars, cartons, cans, wrapped in foil, sealed and shrinks in a heating tunnel. Automatic packing machine, welding machine BAT FORUM STM 50x40 / 3RDKx2 - model: BAT FORUM STM 50x40 / 3RDKx2 - year of production: 2004 - max dimensions of the packed product: 1800 mm x 1750 mm - max height of the packed product: 3000 mm - efficiency: 30 welds per minute - installed power: 35KW (operating power: from 10KW to 15KW) - power supply: 380V, 50Hz Efficiency: 30 packs per minute Engines: 2 conveyors - power - 0.37 kW - Type: STKg 63X - 2 CS1, rpm - 2780 Film reel, 4 pcs: (top and bottom) - power - 0.25kW - TYPE - stkG 63X - 4CS1, rpm. ...

Shrink tunnel for the SmiPak packaging machine The device is practically new, it was used only for packing tests. Technical data provided by the manufacturer • Maximum product height: 230 mm • Supply voltage: 380 – 415V 3PH-N-PE 50/60Hz • Maximum electrical power: 8000 W • Belt speed: 2.8 – 18.80 m/min. • Foil: Polyolefin, PVC, PE • Machine dimensions: 1310 x 835, h 1440 mm • Machine net weight: 187 kg • Machine packed weight: 223 kg In addition, I have two welders compatible with the tunnel. The given net price for the tunnel. Possibility of collection / delivery after individual agreement.

Automatic complete machine with shrink wrapping tunnel Automatic machine for packaging in thermal foil. It closes the package on 4 sides. The machine is operational, works in continuous mode. The input tray picks up and advances the item into the sealing chamber. It seals the film, cuts it off, removes excess film with the use of a side system for collecting waste. Then the internal feeder moves the item into the heating tunnel to shrink the film. Machine Parameters: - FAI PACK CS9700 packaging machine - FAI PACK FR30FT heating tunnel - Dimensions of packed items - knife length (930mm) package up to 650mm - width up to 500 mm - height up to 250-280 mm - Year of manufacture 2000

Sleeve wrapping line MULTIPACK/IT type 479 with shrink tunnel, year of manufacture 2001. The products are conveyed through a curtain of shrinkable foil and closed by a sealing device at the end of the packing system. Right afterwards, the packing unit is conveyed through a shrink tunnel causing the foil to shrink up and firmly enclosing the packing unit. This way, the packages can be secured against reopening and the multipacks again falling apart. The shrink tunnel has a wire belt width of approx. 300 mm, passage height approx. 300 mm, length approx. 1000 mm.

the system was used to wrap styrofoam boxes with smoked fish in foil using the angle welder,, max. number of machine cycles when idling: 20 cycles/min,, The two machines can also be purchased individually., wrapping machine:, The machine works in a stable vertical position thanks to its 4 columns and with a very even pressure on the shrink film. Excellent sealing effect with minimal wrinkling. Height and pressure of the welding frame are adjustable. Easily adjustable perforation module., Pack sizes:, Length: unlimited,, Length x height: up to max. 800 mm,, Cross sealing L/H (mm): 800/350, Dimensions wrapping machine: L x W x H: 3,420 x 1,965 x 1,400 mm., Energy consumption: 2.5 kW, Net weight: 800 kg, Shrink tunnel:, double air circulation,, adjustable airflow,, suitable for large products and/or high speed packaging., Max. product dimensions: L: 1,300 x W 600 x H 300 mm,, Tunnel size: L ...

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

Used filling and packaging line for delicatessen products, In use for mayonnaise, 500 g - jars,, Output: up to a maximum of 170 glasses/minute, consisting of:, OSMEKA - empty glass - depalletizing, pit design, year 2004, Output: 2 layers / minute,, buffer table with separation,, Turning and blowing machine, make Engler, year 2001, Output: max. 170 glasses/min,, Piston filling machine, make Engler, year 1998, Output: up to max. 200 glasses/min,, SAFELINE (METTLER TOLEDO99 metal detector, Drying tunnel, make ACI, Dri-Line Series, CLEVER sleever + shrink tunnel, LANGGUTH labeling machine, type E212/R-235, year 2000, Output: up to max. 170 glasses/min,, MR labeling technology, seal labelling, year 1998, Output: up to max. 200 glasses/min,, MEYPACK tray packer, year 1996, with foil wrapping machine + shrink tunnel, Output: 14,400 glasses / h - 20 cycles per minute

Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...

Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum film ...

Professional packaging system from a renowned German manufacturer. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. -Automatic welding frame movement by manual release. -Roller holder and product tray adjustable. -Height adjustment of the conveyor belt via hand crank. -Tunnel opening approx. 550 x 300 mm. -Hot air flows in the tunnel mechanically adjustable. -Maximum package dimensions approximately: 550 mm x 300 mm. -Maximum film roll width approx. 600 mm. -Perforation of the foil possible via 2 adjustable needle rings. -Machine with castors movable and lockable. -400 V / 7 KW. Setting options on the display: -Tunnel temperature. -Welding time. -Transport time of the conveyor belt. -Transport speed of the roller chain. Dimensions set-up approximately: length 2.5 x width 1.1 x he ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

new foil wrapping machine brand: ERREGI type: Compact 250 line consisting of 2 parts: wrapping machine and shrinking tunnel, with infeed and outfeed elements With automatic selection of 3 or more foil widths. wrapping machine: length of welding bar: 2.500 mm number of reel pairs top: 3 max. width of top reels: 2.450 mm number of reel pairs bottom: 3 max. with of bottom reels: 1.450 mm width of conveyor belts: 1.300 mm length of exit belt: 2.400 mm length of infeed belt: 3.500 to 2.200 mm (telescopic) working height (conveyor): 800 mm opening height (max. workpiece height): 700 mm min. workpiece weight: 5 kg shrinking tunnel: installed power: 54 kW average hourly consumption: 35 kWh length of shrinking area: 2.700 mm total length of tunnel: 3.700 mm width of conveyor: 1.500 mm working height (conveyor): 800 mm opening height (max. wor ...

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

FOOD CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -one side coated underside of fabric with additional wedge bar, (11 mm wide x 8 mm high) in the Middle -endless -Food safe, white -Dimensions: 5,100 mm x 300 mm width x thickness length approx. 1.2 mm, surface with tunnels. -Tunnel approx. 20 mm in height, distance approx. 300 mm, tunnel length 245 mm, studs tip inclined (see photo) On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible)

Pester PEWO-Pack 450SN collator bundler for cartons, with right angle infeed stacking/collation unit (cartons are collated on their narrow side), max. collation size 270 x 400 x 150 mm (LxWxH), up to 35 bundles per minute. With PEWO-Therm shrink tunnel (tunnel entrance approx. 420 x 150mm) and packing table with cross-pusher.

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

CALIBRATION TUNNEL COOLING TUNNEL LOADING TUNNELS EQUIPPED FOR DIAM TUBES. 20 TO 160 MM HOURLY PRODUCTION: 280-300 KG/HOUR

Product number: 2511 Type: T.T.O.R. 125 Year of construction: 2014 Capacity: 500 kg/hr Cube size: 10 x 20 mm Belt width: 295 mm Drying tunnel: 18000 mm Cooling tunnel: 4000 mm Big bag infeed bunker Capacity: max 1200 kg Platform height: 1550 mm Elevating height: 3000 mm Dimensions: 3100 mm x 2020 mm x 4750 mm. Box forming machine Box size: 210 x 100 mm Belt width: 100 mm Dimensions: 1500 x 1400 x 1630 mm Box closing machine Belt width: 100 mm Distance between dividers: 330 mm Dimensions: 2360 x 700 x 1600 mm Including form-, fill- and sealing machine for sugar sticks Rows: 5 pcs Package: 2-5 gram Capacity: 2-5 kg/min. Paper width: 200 mm Dimensions: 1400 x 1150 x 2200 mm abcs://abc.youtube.com/watch?v=2Uixi7OOdqI

We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.

Packaging machine PEWO - pack 450 SN with shrink tunnel Plant for stripping and packing products in boxes. The boxes are then wrapped in foil in the shrink tunnel. Very good ready-to-use condition, directly from production!

ERSA HOTFLOW - 7 Soldering furnace / tunnel dryer / belt dryer / continuous dryer Type: HOTFLOW – 7 Convection oven as soldering oven / tunnel dryer / belt dryer / continuous dryer for drying sheet materials on top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling bars at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Rated power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power: 67 KW Year of construction: 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm Exhaust pipes and additional fan can be supplied. Circuit diagrams are ...

Continuous dryers, tunnel furnaces, tunnel dryers, drying ovens, belt dryers for example semi-automatic flocking system Manufacturer: The parts to be dried are transported in a railway integrated in the dryer. Dimensions outside Width: approx. 3,860 mm Length: approx. 9,260 mm Height: approx. 1465 mm + base 1250 mm Dimensions Inside: Height approx. 820 mm without suspension track Width: approx. 3,230 mm Length approx. 9,000 mm

Oven 450 inner dimensions 2x2x6m PLC Uterna / Europe custom made oven Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfen Haubenöfen Drehherdöfen Thermische Nachverbrennungsanlagen forno a camera per trattamento termico alluminio forno a carro per trattamento termico alluminioforno a carro per trattamento termico alluminio forno a carro per trattamento termico alluminio forno continuo per trattamento termico alluminioforno continuo per trattamento termico alluminio forno continuo per trattamento termico alluminio linea batch per trattamento termico alluminiolinea batch per trattamento termico aliuminio forni industriali da  ...

OMSO DM144/ 6 LIDS, 6-Color Lid Printer, only used for 26,000 hrs ! Infeed Conveyor for feeding Vertical Lid Stacks Robotic removal of Lids from stack to Print Conveyor Auto-Denester Unit No Lid no Ink and No Lid no Print System ARCOTEC CG20-2 Pretreatment station Main 6-Color Print Unit Speed Control for Ink Fountain Rollers Printing Roller self-cleaning device Max. speed 30,000 Lids/ hr (depending on Lid size & shape) Max. Lid dia. Ø 200 mm Min. Lid dia. Ø 50 mm Max. Lid Height 25 mm Max. Rectangular Lid size: 200 x 200 mm Max. Printing dimensions: 180 x 180 mm No. of Printing Blankets 4 UV Tunnel TUV 0077-99 UV-Tunnel power rating : 8 kW Main printer power rating: 20kW Polytype Counter/ Stacker unit delivers Counted Lid Stacks. 400 V 3phase, 50 Hz, Printing Plate Pre-registration Unit. with Monitor Display

Packaging machine BVM Compacta Trend; good condition; is cleaned and checked before delivery; Welding0 width 500mm; Passage height 220mm; treadmill finger conveyor belt 1600mm; SC 4530 shrink tunnel with plastic link belt; Discharge belt 1000mm. Side sealing machine BVM Compacta Trend; good condition; will be cleaned and checked before shipping; sealing width 500mm; hight 220mm; infeed conveyor with fingers 160mm; shrink tunnel SC 4530 with plastic belt; outfeed conveyor 1000mm.

Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober with Original wooden cooling tunnel manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 305 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1930 work width: 305 mm different: With origin wooden cooling tunnel, approx. 8m extendable mass container absolutely in original condition ! We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, (EXW)unpacked

Flow wrapper with shrink tunnel Manufacturer: IFP Model: HSC 4S 500 Year of manufacture: 2012 Can run 2 types of films (shrinkable under-film) Incl. one IFP T-S 40/40 shrink tunnel

Properties: Used foil welding machine of the manufacturer Italdibipack Angle welder with shrink tunnel Condition: fully functional with signs of use Ideal for fast material transport Expertly dismantled and packaged Specifications: Total length: 2,200 mm Total width: 850 mm Total height: 1.500mm Shrink tunnel length: approx. 700mm Working height: 930mm film width: 600mm Weight machine: 270Kg Rated power: 5Kw Year of construction: 2012 Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals ...