We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,266 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
HSK - Guillotine shears with motor drive: - Engine: Dietz 380-3-50, 2.2 kW - D. Stroke rate 100 p.min - Weight approx. 700 kg - Drive via brake motor - Cutting triggering via movable foot switch - Scissor table with support table widened to approx. 600 mm - Side stop TA 500 with scale - Rear width stop ZA 500 in foldable design - Manual adjustable. For long sheets, stops can be placed upwards. - Fully installed and ready to use Additional: Pneum. Hold
used
Shrink chuck, Shrink chuck KENNAMETAL HSK A100x25x115 HSK100ATT25115M Tool: Ø 25 mm Cantilever length ( A-dimension ): 115 mm Mounting: HSK - A100 New ! Dimensions ( shrink chuck ): 165 x Ø 100 mm Dimensions ( packaging ): 130 x 105 x 175 mm
used
Tool holder KENNAMETAL TH1533413 / HSK100-A Lk-Nr.: 102642147 Tool: Ø 10 mm / 2x 60° indexable plate Cantilever length ( A-dimension ): 162 mm Mount: HSK - A100 New Dimensions ( tool holder ): 215 x Ø 100 mm Dimensions ( packaging ): 130 x 105 x 225 mm
used
Plug coupling, compressed air safety coupling, 2 pieces BILZ HSK 2 ( HSK2 ) Material: steel nominal diameter: 10 mm width across flats: 36 mm external thread (AG): 1/2 inch ( cylindrical Whitworth pipe thread ), length: 12 mm New ! dimensions ( single coupling ): 82 x 44 x 44 mm
used
Tool carrier trolley, CNC transport trolley LISTA HSK-A63 48 seats on one floor work surface: 600 x 470 mm working height: 790 mm side work surface: 495 x 305 mm working height: 910 mm lower work surface: 600 x 470 mm working height: 230 mm wheeled, 2 fixed wheels, 2 steerable wheels with parking brake used, tested ! dimensions: 1090 x 520 x 940 mm
used
Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Workshop trolley: stable tool trolley -4 drawers: lockable, see photos for layout -Contents: 25 tool carriers HSK A63/B80 -Total dimensions: 885/555/H995 mm -Weight: 101kg
used
Tool holder, tool holder, milling holder, milling tool -Milling holder: HSK 63 holder, 7 pieces -Type: different versions see photos -Price/tax: complete -Transport dimensions. 470/100/H95mm -Weight: 8.8 kg
used
Clamping set OTT - JAKOB HSK A100 / B125 95.103.636.5.1 ( 9510363651 ) 182714/1 Thread: M16 x 1.5 New! Dimensions ( clamping set ): 138 x 53 x 53 mm Dimensions ( packaging ): 145 x 80 x 72 mm
used
Description: 6 tool holders, brand Freutek, type HSK-63F-ER40, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg
used
Description: 42 pieces Toolhodler HSK 63 from different manufacturers misc. Interfaces like Shrink fit, collet and Weldon Transportdimensions: 1.200 x 800 x 400 mm, ca. 90 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 70 kg
used
Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm
used
Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 1998 SKU:4-060-24-0165 2.056.10.3021 Saw blade: ø180 mm Nmax: 10,000 rpm
used
Tool carrier, receptacle for milling mandrels, 5 pieces goblet TUL-SYSTEM HSK63 plastic Dimensions( one tool carrier): 240 x 140 x 130 mm used, tested ! Dimensions: 620 x 240 x 130 mm
used
Tool carrier trolley, CNC transport trolley KELCH TUL-SYSTEM HSK63 96 seats on two floors < br /> Floor 1: Working height: 330 mm, 48 seats Floor 2: Working height: 830 mm, 48 seats per floor 16 plastic tool carriers ( 240 x 140 x 130 mm ) 3 seats each per tool carrier mobile, 2 fixed wheels, 2 steerable wheels with parking brake with cover used, tested ! Dimensions: 1160 x 550 x 1180 mm
used
Sealing plugs, 6 pieces GÜHRING GM300 4985 63.000 16136705 type of adapter, machine side: HSK63-C used, tested ! Dimensions ( plug ): 65 x 65 x 45 mm Dimensions (packaging): 235 x 150 x 125 mm
used
Tool holder, tool magazine, tool holder, milling holder, milling tool -1 recording: HSK80 -for tool changers -Shrink chuck collet flat chuck reducing sleeves cutter head shell end mill -Weight: 2 kg
used
Tool magazine, tool holder, tool holder, milling holder, milling tool -1 recording: HSK80 -for tool changers -Shrink chuck collet flat chuck reducing sleeves cutter head shell end mill -Weight: 2 kg
used
Description: Consisting of 8 pieces Partly equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 300 x 160 x 200 mm, weight approx.: 20 kg
used
Description: Consisting of 8 pieces Approx. Onsite Dimension. (l x w x h): 400 x 300 x 50 mm, weight approx.: 20 kg
used
Description: Consisting of 16 pieces Partly equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 400 x 300 x 70 mm, weight approx.: 50 kg
used
Description: Consisting of approx. 40 pieces Partly equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 800 x 600 x 70 mm, weight approx.: 70 kg
used
Description: In various sizes and designs Mainly from the manufacturer SCHUNK and WALTER Consisting of approx. 43 pieces Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 100 kg
used
Description: Consisting of approx. 20 holders Partly equipped with cutterheads and other non-mounted cutterheads from the manufacturer AVANTEC Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 150 kg
used
Description: 6 tool holders, brand Freutek type HSK63F ER32-80, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg
used
Description: 6 tool holders, brand Freutek type HSK63F ER32-80, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg
used
Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg
used
Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg
used
Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg
Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours
used
Surface-mounted luminaire, industrial lamp, wall and ceiling lamp SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm
used
Surface-mounted luminaire, industrial lamp, wall and ceiling luminaire, with emergency luminaire SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm
used
Control box, pre-wired PAGUS 400 x 400 x 200 mm 4x push button 1x toggle switch 4x indicator lights 1x power contactor 1x power contactor with auxiliary switch and thermal motor contactor 3x miniature circuit breaker control box: 400 x 300 x 200 mm used, checked! Dimensions: 420 x 300 x 240 mm
used
Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 400 x 400 mm Working height: 60 mm Groove width: 14 / 24 mm Dimensions: 400 x 400 x 60 mm
used
Pneumatic cylinder FESTO DNGU-32-400-PPV-A S3 158098 stroke: 400 mm rod diameter Ø 12 mm Dimensions: 545 x 95 x 50 mm used tested.
used
grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm working height: 115 mm all threads on clamping surfaces M12 x 1,75 Pitch: 50 mm holes ( top ): Ø 20 / 50/55 mm holes ( bottom ): 2x Ø 25 mm width guide ( bottom ): 160 / 200 / 300 mm Height guide (bottom): 55 / 30 / 65 mm spare part for machining center HECKERT CWK400 ! used, tested ! Dimensions: 550 x 400 x 115 mm
used
grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes (top): Ø 20 / 50 mm holes (bottom): 1x Ø 32 mm, 2x Ø 25 mm, 3x Ø 18 mm bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm used, tested ! Dimensions: 490 x 400 x 95 mm
used
Grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes ( top ): Ø 20 / 50 mm fixing bolt ( top ): Ø 50 x 10 mm holes ( bottom ): 1x Ø 32 mm, 2x Ø 25 mm thread (bottom): 4x M16 x 2.0 bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 490 x 400 x 105 mm
used
Pneumatic cylinders, round cylinders, double-acting NORGREN RA/8063/M/400 stroke: 400 mm piston diameter: Ø 63 mm rod diameter: Ø 20 mm rod thread: M16 x 1.20 5, Length: 30mm pmax: 1.0 -16.0 bar New ! Dimensions: 600 x 76 x 76 mm
used
Pneumatic cylinder NORGREN RA/8160/M/400/H stroke: 400 mm Rod diameter: Ø 40 mm pmax: 16 bar Pivot: Ø 40 mm New Dimensions: 750 x 280 x 180 mm
used
Pneumatic cylinders, standard cylinders FESTO DNG-40-400-PPV-A 36343 DSBG-40-400-PPVA-N3 1646557 stroke: 400 mm rod diameter: Ø 16 mm pmax: 12 bar New ! Dimensions: 565 x 55 x 55 mm
used
Fittings with plug-in connection REXROTH MECHMAN Series QR1 Standard 10 x straight fitting 212 100 405 0 10 x elbow fitting 212 200 405 0 thread: M5 hose diameter: Ø 4 mm fitting set consists of - 20 fittings ! New ! Dimensions: 60 x 60 x 65 mm
used
pneumatic cylinder, standard cylinder, double-acting, with flexo coupling FESTO DNC-50-400-PPV-A 163379 stroke: 400 mm rod diameter Ø 20 mm rod thread: M16 x 1,5 pmax.: 12 bar with flexo coupling FK-M16X1,5 used, tested ! Dimensions: 740 x 65 x 65 mm
used
Pneumatic cylinder, standard cylinder, double-acting FESTO DNC-40-400-PPV 163361 stroke: 400 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25 pmax: 12 bar spare part for machining center HECKERT CWK400 D !, among others! used, tested ! Dimensions: 565 x 54 x 54 mm
used
Linear actuator FESTO DGPL-40-400-PPV-A-B-KF-GK-SH 175136 stroke: 400 mm piston diameter: Ø 40 mm Carriage: 167 x 82 mm pmax: 8 bar New ! with documents ! Dimensions ( Linear actuator ): 700 x 97 x 91 mm Dimensions ( packaging ): 730 x 200 x 150 mm
used
Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS working surface: 400 x 400 mm height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm
used
Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate HAHN & KOLB, IFA ASCA Working surface: 400 x 400 mm DIN 876 height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm
used
fitting to Orion or Zenit filters, without seals Number available (price per tank): 70 material: NORYL 40x 40 customs no.: 84212200 More then 300 machines new and second hand on our seema .de
used
Clamping bracket STANKO clamping surface: 400 x 400 x 64 mm bridge width: 30 / 88 / 90 / 87 / 33 mm Groove width: 18 / 32 mm Groove depth: 35 mm Mounting surface: 400 x 270 x 35 mm 2x slotted hole: Ø 20, Length: 120 mm used, tested ! 85 KG (heavy duty) Dimensions: 400 x 400 x 270 mm
used
Compact cylinders, pneumatic cylinders, double-acting FESTO DNC-32-400-PPV-A 163315 1376429 piston diameter: Ø 32 mm stroke: 400 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar with flexo coupling: FK-M10X1,25 ( 6140 ) used, tested ! Dimensions: 625 x 45 x 100 mm
used
Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 550 x 450 x 195 mm, weight approx.: 90 kg