horizontal lathe used for sale

Stock number: UG6346 Used stainless steel Padovan (IT) filter with horizontal rotating discs. Filtration surface 20 m2. Working output in range 25000-27500 l/h. Machine had been working on fruit juice filtration / food industry. Has local control panel and has technical documentation.

: 330 mm : 5000 mm : 360 mm : 330 mm : 360x330 mm dimensions of saw-band: 5000x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fanuc touchscreen control Nikken 4th axis Twin rotary diamond disc unit - this unit is mountednbsp;vertically with a slide-way adjustment to cater for the differing grind heights. The unit is designed to mount twin opposing discs to support dressing in both directions and provide support for the 6 thou diamond tip radius.nbsp; Longitudinal travel X-axis (autom.): 1420 mm Cross-travel Y-axis (autom.): 750 mm Dimensions of the table: 1200 x 600 mm Max dia grindingstone: 457 x 100 x 203,2 mm Spindlespeeds: 10 > 1680 rpm Motorpower: 22 kW Length: 6202 mm Depth: 3445 mm Height: 2855 mm Weight: 11,8 ton

Okuma MA50HB HORIZONTAL. 10,000 revolutions. 60 tools. Renishaw and presetting. Perfect conditions

SNK CMV-100/5 5-Axis CNC Horizontal Machining Center New 2016 - Installed 2017 CNC Control: yes CNC Control: Fanuc 31i-B5 Main Specifications - See Below: See Below Table Size:: 1000mm x 1000mm (39.3 x 39.3 in) Distance from Pallet surface to spindle center: 0-1,300mm (0 -51.1 in) Distance from pallet surface to spindle end (when spindle is in vertical position): 0-1,000 mm (0-39.3 in) Max Table Load: 1,500 kg / table (3,300 lbs.) Spindle:: See Below Spindle Speed: 40 to 8,000 RPM Spindle Nose Taper: CT-50V (Dual face contact type) Coolant Thru Spindle: yes Spindle motor drive: VAC 30/22 kW (40/29.5 HP) Torque N-m: 26 to 653 Nm Travels: See Below Table Longitudinal (X-Axis): 1,500 mm (59.0 in) Column transverse (y-Axis): 1,330 (52.3 in) Spindlehead vertical (Z-Axis): 1,300 mm (51.1 in) Spindlehead tilt (A-Axis): +30 to -120 deg. Table rotation (C- ...

X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.

Horizontal FLORIDA Flowpack from ULMA. Ready for cuvetteof maximum 37cm or other similar big pack. Including a DOMINO printing coder. 2 units. Jaws not included.

CAM blister carton machine guk leaflet feeder two blister feeders Located in United Kingdom

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

(2) Asahi Sunac THP500-6 horizontal forging press (heading machine) Year: 2008 First stroke: 24 mm Second stroke: 50 mm Kickout power: 150 kN Open height: 625 mm Closed height: 425 mm Die (WxL): 500x490 mm Punch (WxL): 250x350 mm Ram stroke: 200 mm Forging force: 5000 kN Cycling time: 6.5 sec Crank speed: 60 RPM Machine weight: 28 t

cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Model: Fanuc CNC version: 18i-T Main spindle nose: ASA 6 Main spindle power: 22Kw Main spindle self-centering diameter: 210mm Main spindle bar passage: 65mm Turning diameter: 250mm Turning length: 500mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 X axis travel first turret: 215mm Z axis travel first turret: 510mm Rapid linear axis feeds X Y Z: 24m/min Counter-spindle: yes Spindle nose: ASA 5 Number of spins: 4000 Power against spindle: 3,7Kw Bar passage: 43mm Z stroke counterspindle : 515mm Bar loader model and brand: Iemca Master 880 Chip evacuator: carpet operated Presetting: yes Number of motorized tool holders supplied: 4 :::D IMENSIONS AND WEIGHT::: Length: 4000mm Width: 1900mm Height: 1800mm Weight:  ...

5-Axis Horizontal Machining Center with Pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D control Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazines. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234

5-axis horizontal machining center Makino MCD 2016 Year of construction 2005 Fanuc 16MC + Pro 3 Controller 2-fold pallets 1,300 x 1,300 mm Pallet load per pallet max. 12,000 kg ! 4e axis B-axis 360° / 0.001° 5e axis 25° spindle holder, C-axis + /- 185° X 2,000 mm Y 1,600 mm Z 1,500 mm Spindle drive power 50 kW Spindle speeds up to 15,000 rpm. Tool holder BT50 Big Plus 99-fold automatic tool changer ATC Renishaw Touch Probe Scales on X, Y, Z, B axes Conveyor IKZ 28 bar Great condition To be visited under power Offer number MH-6265

Horizontal packaging machine. Filling head not included. Machine has not been operated for years, but was working when decommisioned. Dimensions: Width: 70 to 140 mm Height: 100 to 200 mm Filling capacity: 5 to 250 cc

: neu : ca. 10 Wochen ab Auftrags : Türkei : 15300 € : 286.11 € : 4160x34x1,1 mm : 20-100 m/min : 320 mm : 320 mm : 610x320 mm : rund 260 mm, quadrat 225 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : 740 mm : 0.12 kW : 0.37 kW : 2.2 kW : 2100 mm : 1200 mm : 1350 mm : 1150 kg : rund 320 mm, quadrat 320 blade brush control panel height adjustment by switch hydromechanical belt tension inverter material limitation shaft cooling equipment saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping € 970,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 € : 402.05 € : 4800x34x1,1 mm : 20-100 m/min : 380 mm : 380 mm : 430x380 mm : 590 mm : 0.12 kW : 0.55 kW : 3 kW : 2900 mm : 950 mm : 1660 mm : 1342 kg blade brush control panel hydraulic vice optical adjustment switch hydromechanical blade tension inverter mechanic top clamping material limit shaft coolant pump saw blade security switch gearbox pressure adjustment 1,2 meter roller table user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 9300 € : 176.7 € : 2730x27x0,9 mm : 35-70 m/min : 230 mm : 230 mm : 240x230 mm : 590 mm : 0.12 kW : 0.37 kW : 1.3 kW : 1700 mm : 800 mm : 1500 mm : 530 kg blade brush control panel height adjustment switch hydromechanical blade tension inverter mechanic top clamping material length stop coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 69200 € : 1266.36 € : 9500x54x1,6 mm : 20-100 m/min : 1020 mm : 1020 mm : 1020x1020 mm : rund 675 mm, quadrat 675 : 535 mm : 0.12 kW : 2.2 kW : 7.5 kW : 4500 mm : 1700 mm : 2750 mm : 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTION: hydraulic top clamping € 1.940,-- chip conveyer € 1.540,-- turn table for turning the machine for mitre cutting € 5.730,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 99500 € : 1820.85 € : 9600x54x1,6 mm : 20-100 m/min : 800 mm : 800 mm : 1300x750 mm : rund 800 mm, quadrat 770 : rund 570 mm, quadrat 570 : rund 800 mm, quadrat 770 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 5050 mm : 2200 mm : 2900 mm : 6700 kg Hydraulischer Spannstock Digitalanzeige für Winkelanzeige Hydraulische Klemmung des Sägearmes Sägearmdrehung von Hand Stufenlos einstellbare Absenkgeschwindigkeit des Sägearmes Automatische Sägerahmenanhebung nach Schnittende Sensitive Schnittdruckregulierung in Abhängigkeit der Materialbeschaffenheit Hydromechanische Bandspannung über Manometer ablesbar Mobiles Bedienpult Schräg verzahntes konisches Schwerlastgetriebe Angetriebene Späne Bürste Bandführung über Hartmetallplatten und Rollen Automatische Bandbruchsicherung Kühlmitteleinrichtung HYDRAULISCHE ANHEBUNG DES SÄGERAHMENS Bet ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 27500 € : 508.75 € : 5000x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 640x360 mm : rund 360 mm, quadrat 360 : rund 310 mm, quadrat 270 : rund 360 mm, quadrat 360 : 800 mm : 0.12 kW : 3 kW : 3000 mm : 1200 mm : 1910 mm : 1635 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (sample photo - roller table see photo - optio ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51200 € : 936.96 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 0.37 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional a ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 78800 € : 1442.04 € : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 600 mm : 1000x600 mm : rund 650 mm, quadrat 600 : rund 440 mm, quadrat 440 : rund 650 mm, quadrat 600 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 4750 mm : 1970 mm : 2630 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 26700 € : 493.95 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 320 mm : 350x320 mm : rund 160 mm, quadrat 150 : rund 260 mm, quadrat 180 : rund 300 mm, quadrat 250 : 740 mm : 0.12 kW : 1.1 kW : 2.2 kW : 2100 mm : 2200 mm : 1500 mm : 1660 kg blade brush NC control panel hydraulic vice hydromechanical blade tension inverter coolant pump saw blade security switch gearbox height adjustment user manual in GERMAN or ENGLISH OPTION: hydraulic blade tentioning € 1.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 44100 € : 815.85 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available,  ...

CNC controller: FANUC 31i-B Axes X-axis travel mm: 1.050 Y-axis travel mm: 850 Z-axis travel mm: 970 B-axis degrees: 0,001º Distance spindle nose - table surface mm: 100-950 Worktable Number of pallets: 2 Table dimensions mm: 630x630 Maximum workpiece size (D x H) mm: ø1.100x1.100 Max. workpiece weight kg: 1.200 APC time s: 15,5 Spindle Spindle speed rpm: 10.000 Spindle drive power kW: 30 (25% ED) Spindle torque Nm: 420 (25% ED) Tool system Tool holder: HSK-A100 Tool magazine slots: 90 Max. Tool Diameter mm: ø250 Max. Tool Length mm: 550 Tool-to-tool time s: 2,4 Chip-to-chip time s: 4,5 Equipment Electronic Handwheel Chip conveyor 3D Renishaw tool probe Rinsing gun Signal lamp High pressure pump Mist collector 4th axis RS 232 interface Internal coolant supply 4x pallets Toolholders are not included Machine running times Spindle Working: 6.026 B ...

Used flow wrapper PFM; Type: Tornado LD SS S Horizontal flow wrapper for gas-tight packs for M.A.P. applications. El. Connection : 380 V, 50 Hz, 17.3 A, 9.7 kW Net weight: approx. 1,800 kg Further data on request. Visits and test runs are possible by arrangement.

Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

5-Axis Horizontal Machining Centre MCM Tank 1300 5-AXIS New in 2017 Siemens 840D solution line Twin pallets 630 x 800 mm Work weight max. 1500 kg NC rotary table - 4th axis B-Axis 360° / 0.001° NC-Tilting head 5th axis A-Axis +80°/-95° / 0.001° X 1300 mm Y 1400 mm Z 1400 mm Feeds and rapids to 50000 mm/min. Spindle drive 40/52 KW Spindle speeds to 10000 rpm Tool taper ISO 50 199 tool ATC Linear scales for higher accuracies Renishaw sample Chip conveyor CTS 65 bar Beautiful machine – excellent condition Operating hours 11544 - 05/2020) Spindle Working hours 6784 (05/2021) Inspect under power Proposal Number MH-6155

pressure: 100 kN stroke: 0-200 mm table-size: 450 x 1000 mm working speed:: 6-10 mm/ sec. return speed: 20 mm/sec work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 1,5 kW bending capacity max. - round: 42x3,2 mm : 150x10 mm weight: 320 kg dimensions: 1010x480x1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralHorizontal Machining Centre in travelling column construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical100000/100000/100000 mm/minRapid traverse longitudinal/transverse/vertical100/100/100 m/minWorking area 1Longitudinal630 mmCross800 mmVertical750 mmIntegrated motor spindle speedMASTER®Drive power (100% DC) 30 kWDrive power (40% DC) 46 kWTorque (100% DC) 130 NmTorque (40% DC) 200 NmSpeed range - 15000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 400 kg / 882 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z - axis 630 x 800 x 750 mm/24.8 x 31.5 x 29.5 in axis kinematics A / B (basic machine without NC rotaryClamping hydraulics 2/4 channels f. working tabl ...

: neu : ca. 6 Monate ab Auftragse : Türkei : 29300 € : 591.86 € : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 570x560 mm : 590 mm : 0.12 kW : 1.1 kW : 4 kW : 500 mm : 1050 mm : 2050 mm : 2242 kg NC control double column band saw 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tension inverter linear way optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch gearbox user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

:::SPECIFICATIONS::: CNC Model: Fanuc - CNC version: 31i - MODEL B - Tool connection: BT 40 - Spindle power: 25Kw - Number of spindle revolutions: 12000 - Number of tools: 60 - X Axis Stroke: 710mm - Y Axis Stroke: 680mm - Z Axis Stroke: 680mm Rapid feeds linear axes X Y Z: 50m/min Guides: roller Pallet size: 500x500mm Pallet type: continuous Maximum load allowed: 500 x 2Kg High cooling pressure: yes System with external tank with filter: yes Chip evacuator: carpet Other technical data: Normal chip evacuation system and dust scraping :::D IMENSIONS AND WEIGHT::: Length: 4600mm Width: 4500mm Height: 3100mm Weight: 16000Kg

Type 21 - ideal for processing slitting knives, circcular knives Magnetic table max inclination of table: +- 10° speed of table: 24 gt; 200 rpm Dimensions of the table: dia 300 mm Distance between table -- spindlecentre: 100 mm Max dia grindingstone: 180 > 250 mm Spindlespeeds: 2000 rpm Motorpower: 2,2 kW Length: 1480 mm Depth: 900 mm Height: 1850 mm Weight: 1400 kg

Surface grinder where the magnetic table can be tilted at an angle of -7°/0°/+7° Magnetic table of 600 mm Max horizontal stroke of grinding wheel: 610 mm Longitudinal travel X-axis (autom.): 610 mm Dimensions of the table: dia 600 mm Motorpower: 10 hp Weight: 6 ton Cooling system: yes

Flat conveyor belt on aluminium substructure - MTF Technik GL-HM140 Year of construction: Flat conveyor belt on aluminium substructure Length of the support belt 260 cm, width of the support belt 37.5 cm With the regulation of the height Mobile conveyor belt, on wheels Price: On request

Flat conveyor belt on aluminium substructure - MFördersysteme GFV/2 (3 pcs.) Year of construction: 2005 Flat conveyor belt on aluminium substructure Length of the support belt 400 cm, width of the support belt 50 cm With the regulation of the height Price: On request

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 11900 € : 242.76 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.12 kW : 0.37 kW : 2,2 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal CNC machining center Manufacturer Mazak Type FH 6800 Bauajhr 1999 Control Mazatrol 640M Travel X/Y/Z 1050/800/880 80 fold tool changers SK50 2 compartment pallet changers Pallet size 630 x 630mm 1° Division Conveyor IKZ internal coolant supply Machine is geometrically in very good condition. It was regularly maintained.

Horizontal CNC machining center Manufacturer Mazak Type FH 880 Year of construction 1997 Control Mazatrol Mplus Travel X/Y/Z 1300/1100/1000 80 fold tool changers Tool holder SK50 2 compartment pallet changers Pallet size 800 x 800 controlled rotary table ( 4th axis ) Conveyor IKZ internal coolant supply 3D Radio Accelerator Machine is in a used good condition. Geometrically, the machine is very good.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 59000 € : 1180 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 670x540 mm : rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm : 0.12 kW : 2.2 kW : 4 kW : 3100 mm : 2350 mm : 2150 mm : 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.230,-- micro coolant equipment € 890,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 66.800,-- The data for this ad was created with ModulMWS - t ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 52200 € : 1044 € : 5400x41x1,3 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm : 0.12 kW : 1.1 kW : 4 kW : 2850 mm : 2350 mm : 2000 mm : 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.230,-- micro coolant equipment € 890,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 58.900,-- The data for this ad was created with ModulMWS - ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 42800 € : 864.56 € : 5200x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 610x360 mm : rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm : 0.12 kW : 1.5 kW : 3 kW : 2850 mm : 2250 mm : 1870 mm : 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.120,-- micro coolant equipment € 770,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 48.300,-- The data for this ad was created with ModulMWS - ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 32600 € : 658.52 € : 4380x34x1,1 mm : 20-100 m/min : 325 mm : 325 mm : 400x325 mm : rund 325 mm, quadrat 325 : rund 300 mm, quadrat 265 : rund 190 mm, quadrat 190 : 655 mm : 0.12 kW : 1.1 kW : 2.2 kW : 2130 mm : 2150 mm : 1650 mm : 1860 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.120,-- micro coolant equipment € 770,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 36.900,-- The data for this ad was created with ModulMWS ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 32600 € : 658.52 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 750x540 mm : rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm : 0.12 kW : 4 kW : 3000 mm : 1300 mm : 2150 mm : 2445 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame 3° inclined saw band user manual in GERMAN or ENGLISH (the vertical hydraulic clamping shown on the photos ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 13100 € : 267.24 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.12 kW : 0.37 kW : 2 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with encoder and NC control blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.