horizontal gear hobbing used for sale

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

harden furnace 1200 0.6x0.6x1.0m temperature 100 - 1200 Celsius possible various size Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Ha ...

From stock dissolution, unused. 1 x Leroy Somer OT 2603 V33D U N 138084801/001 gearbox Flange: 35 cm The machine is electrically tested before sale and receives a DIN VDE 0113 test report.

Planing comb to Maag gear planing machine

Gear motor Lenze Flange gear motor, shaft diameter 25 mm Wavelength 50 mm 1.5 kW Reduction 20.04 Output speed 172.1 In good condition, ready for use Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Magnet agitator 0,55 kW gear motor,141 rpm,220/380 V.,Ø 300/600 stainless mixing blade.

Gear pump,stainless,acid proof steel,ECO GM4,0,25 kW,theoretical capacity 400 l/h.

Gear pump,stainless,acid proof steel,ECO,Pulsafed GM8,1,1 kW,Theo. cap. 2500 l/h.

Gear Pump,stainless steel,ECO GM8,1,5 kW,710 rpm.,Theo. cap 1900 l/h

technical details gearbox: - Speed range output shaft: 18 - 49 rpm - Torque: 10.5 mkp = 103 Nm - infinitely adjustable via handwheel Technical data engine: - Manufacturer: BBC / YQU 80 MC 2a - Number: GS 608117 - 33 - Voltage: 380/200 V - Current: 2.6/4.5 A - Frequency: 50 Hz - Power: 1.1 kW - Cos φ: 0.86 - Speed: 2,860 rpm - Total weight: 40 kg - Dimensions: 600 x 280 mm - Hole dimensions base plate: 90 mm longitudinal / 140 mm wide - Transport dimensions: 700 x 450 mm (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

workpiece diameter: 125 mm module: 4 Control: SIEMENS 840 C x-axis: 105 mm y-axis: 40 mm z-axis: 500 mm total power requirement: 47 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2,6x2,1x3,1 m with measuring and palletizing system from Hörzer & Fehrenbach for gearwheels (bore receiver) Workpiece diameter: 17-39.5 mm Component height: approx. 6-15 mm Oblique as well as straight toothed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 250 mm centre distance: 0 mm honing length max.: mm max. module: 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch ...

max. wheel diameter: 400 mm gear width: 0 mm module: pinion diameter - max.: 254 mm axial cross angle: 90 ° total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is loaded with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automat ...

max. wheel diameter: 2500 mm gear width: 0 mm max. module: 34 min. module: 1 total power requirement: ca. 15 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 6 total power requirement: 25 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: NA mm max. module: 5 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manual Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 120 mm gear width: 160 mm max. module: 3 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: NA mm gear width: NA mm max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manually operated 2-Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2000 mm gear width: 0 mm max. module: 0 dimensions of the machine ca.: 2x1,2x1,5 m uncomplete machine body with drive motor. drive unit fully functional. Without grinding unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two Gear Motors SEW Eurodrive, Model: V112, 3 Motor, S1-100% ED, SN: E189357 Device in good condition. Please check manufacturer site: Kanitech Machine store in warehouse in Poland , 55-300 Środa Śląska If needed any additional photos or videos or if you are planning visit to check our equipment you are welcome. Possible transport organization, transport cost covered by buyer. Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, entered into the register of entrepreneurs of the Polish Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commer ...

max. wheel diameter: 650 mm gear width: 200 mm max. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mm table bore diameter: 150 mm number of strokes - stepless: 35,5 - 560 c/min max. ram stroke: 230 mm feeds: 3,55 - 40 mm/min radial feed: 0,8 - 9 mm/min work-spindle diameter: 110 mm total power requirement: 28,2 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,8 x 2,3 x 2,5 m Gear shaping machine for the production of spur gears, for Internal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630 complete Modernisation + overhaul in 2012 with: - new painting - new electrical system from Telemecanique - Counter Holder - Chip conveyor - Coolant unit - change gears Not used in production again after overhaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

P1251

max. wheel diameter: 400 mm gear width: 200 mm max. module: 10 min. module: 1 profile depth: 25 mm x-axis: 630 mm y-axis: 400 mm z-axis: 190 mm U-axis: 80 mm a- axis: 360 ° b-axis: +/- 30 ° max.helical angle: 30 ° grinding wheel diameter: 250 - 350 mm spindle speeds (infinitely variable): 1500 - 2800 U/min grinding slide feeds: 6000 mm/min center distance betw. workpiece-tool min/max.: pitch max.: 9000 mm pitch min.: 10 mm electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 38 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,2 x 2,6 x 2,8 m horizontal Profil Gear Grinding Machine for Spur and Helical External Gears. Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor Wheels. Equipped with: - CNC Control FANUC 0i-MF -- for 6 Controlled Axis (4 simultaneously) - Gear Measuring System - Chip and Sludge Removal System - Pape ...

max. wheel diameter: 1600 mm gear width: 250 mm max. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mm base circle dia. - min.: 150 mm specimen weight from/to: 4000 kg feeler adjustment movement - parallel: 1400 mm max.helical angle: 0 - 90 ° wheel diameter with counterstay: 1000 mm feeler adjustment movement - parallel: 800 mm centre height: 1150 mm electrics - voltage/frequency: 400 / 50 V/Hz dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m total power requirement: 2 kW weight of the machine ca.: 3 t Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle, Profile c ...

max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1,5 total power requirement: 62 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - wo ...

max. wheel diameter: 400 mm gear width: NA mm max. module: 1 min. module: 10 total power requirement: 12 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total ele ...

heavy gear, angular gear -Translation: 20: 1 -Drive shaft: 35 mm -Output shaft: 2x 22 mm -Weight: 27 kg

Gear, stin gear -Drive shaft: Ø 28.7 mm -Output shaft: Ø 44.2 mm -Dimensions: 420/320/H280 mm -Weight: 77 kg -Translation: 1: 14

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 60 total power requirement: 25 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 ______________________________________________________________________ ___________ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12 ...

max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...

max. wheel diameter: 330 mm gear width: 180 mm max. module: 7 min. module: 0,5 total power requirement: 12 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hypoid gearbox, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 4,565 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: TPK+050S-MF3-175-0E1-1S11, I=175, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Free additional flange, see photos - Motor side: Centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: Centring D140mm, pitch circle D168mm x z12, - Additional flan ...

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

max. wheel diameter: 1500 mm gear width: 550 mm max. module: 25 min. module: 2 workpiece weight max.: 6000 kg max. number of teeth: 432 min. number of teeth: 12 table diameter: 990 mm grinding wheel size: 400 mm total power requirement: 75 kW weight of the machine ca.: 20,5 t dimensions of the machine ca.: m With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gearboxes, pinion gears, angular gears, transmission gears -Drive shaft: Ø 20 mm -Dimensions: 200/180/H200 mm -Weight: 11 kg -Translation: 1:13.8

Gear, stin gear -Drive shaft: Ø 19 mm -Drive shaft: Ø 19 mm hollow shaft -Dimensions: 260/240/H180 mm -Weight: 12 kg -Translation: 1:2.9

Gear, stin gear -Drive shaft: Ø 38 mm -Drive shaft: Ø 28 mm -Dimensions: 330/280/H280 mm -Weight: 30 kg -Translation: 1:20

Gear, stin gear -Drive shaft: Ø 25 mm hollow shaft -Hollow shaft: Ø 24 mm -Dimensions: 220/190/H185 mm -Weight: 14 kg -Translation: 1:20

Gear motor 220 volts, angular gear, electric motor -Voltage: 220V -Power: 1100 W 5.0 A. -Speed: 12 rpm -right/left run -Control switch -Dimensions: 650/220/H230 mm -Weight: 13 kg

Gear, cogs, spur gear -Gear: helical, 59 teeth -Diameter: Ø 344 mm -Tooth width: 80 mm -Dimensions: see photos -Total dimensions: Ø 344 x 467 mm -Weight: 78 kg

Gear, gears, spur gear -Gear: Spur gear 30 teeth -Shaft mount: inside Ø 42 mm -Measurements: see photos -Dimensions: Ø 80 x 60 mm -Weight: 0.9 kg

Gear, gears, spur gear -Gear: 35 teeth -Shaft mount: inside Ø 60 mm -Measurements: see drawing in the photos -Dimensions: Ø 368 x 78 mm -Weight: 16 kg

Gear, stin gear, angular gear -Translation: 1: 7 -Shaft dimensions: see photo -Construction: B3 -Dimensions: 120/80/H120 mm -Weight: 2.1 kg

Gearboxes, pinion gears, angular gears, transmission gears -Translation: 1: 11.21 -Drive shaft: Ø 16 x 45 mm -Output shaft: Ø 25 x 50 mm -Dimensions: 315/145/H155 mm -Weight: 9.7 kg

heavy gear, angular gear -Type: E 880 G -Shaft: Ø 20 mm -Length: 50 mm -Flange: Ø 125 mm -Dimensions: 260/280/H160 mm -Weight: 16 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis for: pedestrian stacker -Wheel: 220 x 70 mm -Dimensions: 220/250/H640 mm -Weight: 54 kg

Manufacturer Niles Model ZSTZ 1250 Year 1986 Maximum wheel diameter : 1250 mm Module + : 30

Manufacturer Gleason Model Pfauter P 200 G Year 1999 Machine is in good condition

Reishauer AZA Gear Grinder The machine is in very good condition with complete equipment. It is connected to electricity and can be seen in operation. Complete documentation.

max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1.5 max. workpiece diameter: 275 mm tooth width: max. 5.5 mm spiral angle: 0 - 60 ° number of teeth: 5 - 120 transmission ratio min.: 1:1 transmission ratio max.: 1:10 milling drive motor: 20 kW workpiece drive: 14.5 kW total power requirement: 62 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel ...