136,420 used machines on RESALE, but how to find them? Machine Search
Key data: 50 t, 270 mm, 850 mm
Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D controller. Automatically controlled side stop for convenient machining of your sheet metal parts from single part production to series production.
Specifications: Working length: 4100 mm Max. bending power: 10.0 mm Bend: 8.0 mm Diameter upper roller: 310 mm Diameter of lower rollers: 285 mm Hardened rollers hydraulic snap roller bearing Conical bending device Control panel with digital display CE mark Dimensions (length x width x height)): approx. 5100 x 1250 x 1400 mm Weight: approx. 6.2 tons Condition: very good, almost mint condition The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Specifications: 2 castors hydraulically adjustable 3 rollers driven Shaft diameter: 120 mm Roll diameter: 390 mm lateral hydr. Controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 to The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Specifications: 2 castors hydraulically adjustable 3 rollers driven Bending moment: 48 cm/3 Roll diameter: 360 mm Main motor power: 7.5 KW Dimensions (length x width x height): approx. 2000 x 1300 x 1900 mm Weight: approx. 5.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Rothenberger Robull Type L Hydraulic Pipe Bending Machine Larger, Sturdier Version Think it's type L. The number on the nameplate begins with L. The version that you can still buy at the moment is smaller and the bending glasses at the front are not so stable. Good used condition, full function, without the tripod foot. This is available to buy at Rothenberg, or simply build it yourself. Total weight 68 kg. Further dimensions can be found in the pictures. Shipping is done on several packages due to the weight
Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,
Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools
tube diameter: 4-20 mm wall strength: 2 mm bending radius min.: 10 mm bending radius max.: 75 mm bending speed: 35 mm/min pull up length of tube: 2000 mm Control: total power requirement: 7,5 kW weight of the machine ca.: 1,1 t dimensions: ca. 3100x1000x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max tube diameter 76 mm Max Tube thickness 3 mm Max lenght 6000 mm
Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.
weight: 200 kg : 931855500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja positioning automatic: ja documentation: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 12-54 mm (Kupfer / Edels. mm serial number: EBD 022 99 002 mode of operation: Schneiden/ Entgraden / Re speed: Rollen 450 U/min m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: bis 60 mm weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 75 (800) mm : 60 (750) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 100 x 11 (1000) mm Axis diameter: 80 mm work speed: 6,0 m/min Tool diameter: 242 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,5 x 1,05 x 1,4 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm : 30 mm L-beam: 20 x 20 x 4 mm flat steel: 25 x 6 mm Axis diameter: 20 mm work speed: 11 U/min total power requirement: 0,2 kW weight of the machine ca.: 80 Kg dimensions of the machine ca.: 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: max. 16 mm square edge steel: 16 mm round bar steel: 16 mm weight: 45 Kg : 180 ° dimensions: 0,4 x 0,4 x 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: Handbetrieben weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 420 Kg dimensions of the machine ca.: 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2070 mm plate thickness: 4 mm distance between columns: 2100 mm diameter of upper rolls: 140 mm total power requirement: KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1270 mm plate thickness: 3,0 mm distance between columns: 1300 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 x 8 mm square edge steel: 12 mm round bar steel: 15 mm weight: 0,025 t : 51 x 31 x 22 cm dimensions: 135 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35 (600) mm : 35 (900) mm L-beam: 50 x 50 x 5 (800) mm T - beam - web outwards: 60 x 7 (600) mm Axis diameter: 50 mm work speed: 4,5 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,1 x 0,8 x 1,5 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 8,0 mm distance between columns: 1070 mm diameter of upper rolls: 150 mm pre-bending capacity: 6,o mm connected load: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35 mm : 35 mm bar material dia. max.: 70 x 2 mm rectangle: 60 x 60 x 3 mm flat steel: 60 x 10 mm Axis diameter: 50 mm work speed: 4,3 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,9 x 0,95 x 1,4 m Profile bending machine with: - Foot pedal right/left rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: max. 3 Zoll wall strength: 3 mm pressure: 16 t weight of the machine ca.: 45 Kg dimensions: 0,8 x 0,6 x m : 0,65 x 0,60 x 0,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,39 t dimensions of the machine ca.: 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm tube diameter: 140 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 100 x 5 mm square edge steel: 16 x16 mm round bar steel: 18 mm L-beam: 100 x 8 mm dimensions: 400 x 290 x 280 mm weight: 35 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mm plate thickness: 8 mm pre-bending: total power requirement: 7,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3600x1250x1350 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 40 mm pre-bending: 32 diameter of upper rolls: 460 mm diameter of lower rolls: 420 mm side roll diameter: 360 mm power capacity: 30 kW min. bending diameter: 1380 mm weight of the machine ca.: 30,1 t dimensions of the machine ca.: 6,3 x 2,3 x 2,6 m 4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm - Warranty 12 months Optional Accessories: - variable speed of rotation (5.858,00 Euro) - material feeding table (5.100,00 Euro) - center support (18.750,00 Euro) - 2 x side supports (15.000,00 Eur ...
tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 2,0 mm distance between columns: 2150 mm roll diameter: 90 mm total power requirement: 1,5 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,5 x 0,7 x 1,3 mm Sheet metal bending machine 3 rollers - 2 driven rollers - Foot switch - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm : 30 mm flat steel: 50 x 10 mm L-beam: mm Axis diameter: 30 mm work speed: 6,0 U/min roll diameter -toolpieces: 132 mm total power requirement: 0,75 kW weight of the machine ca.: 0,25 Kg dimensions of the machine ca.: 0,6 x 0,8 x 1,3 m Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: ? mm wall strength: ? mm bending radius min.: ? mm roll diameter: div. ca. 100 - 240 mm roll diameter - bore: 60 mm Shipping weight: 950 kg Packing: 1,20,80,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible.
Very few working hours: approx. 200 h Technical and visual condition: very good+ Pictures attached Price: 16.000 EUR net ExW Heavy welded steel construction Horizontal and vertical work possibility All three rollers driven by hydraulic motor and planetary gear Hardened rolls Hydraulic delivery via two lower rollers Lateral mechanical straightening rollers, infinitely adjustable Separate control panel with foot control and 2 digital displays Bending performances profile type optional Explanations for bending performance, profile type optional The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 Bending performances profile type standard Square material dimensions [1] 45 mm Square material min. bending Ø [1] 500 mm Square material dimensions [2] 15 mm Square material min. bending Ø [2] 380 mm Flat material l ...
WAFIOS CNC winding and bending machine Type FTU5.3-98 Year of manuf. 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm WAFIOS CNC winding and bending machine Type FTU5.3-98 Built in 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm
Roller sets for profile bending machine HERKULES WETZLARThe rollers fit on a profile bending machine HERKULES WETZLAR type BO 238 N for 3-roll ring bending machine, also come from such a machine.Shaft diameter 80/60 mmRoller diameter 160/180 mmRoller width max 180 mmThe machine had 2 driven rollersWeight of all rollers approx. 100 kggood condition; used
Reversible prism, 1-piece die block for die bending machineBending tool for press brakeReversible prism with 6 different prismsPrism size 30 mm with 3 mm radius for 90, 40 mm with 4.5 mm radius for 90 50 mm with 4 mm radius for 90, 18 mm for 90, 10 mm for 90 12 mm for 45Dimension 90 x 88 mmPrism length 3000 mmWeight 147 kgGood condition; used
4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons
used, technically overhauled reinforcing steel bending machine. PCN control unit Rotations of the bending disc 8/16 rpm. Connection 16 A Single bend max. 1 piece of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.
used, technically overhauled reinforcing steel bending machine. PCN control unit Rotations of the bending disc 8/16 rpm. Connection 16 A Single bend max. 1 piece of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: LECHNER Maschinenbau e.K. Type: 3100/110 Year of Make: 2020 Voltage: 400V Power consumption: 1.5 kW Power connection: 3 phases, zero, PE Upper roller diameter: 60 – 100mm Maximum working length: 1100mm Nominal capacity: 3.2mm (sheet thickness) Feed: 5m/min All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
Key data: 100 t, 215 mm, 3100 mm
Ref.Nr. 00882 Name of the system: Used press brake Manufacturer: Beyeler Model PR4 1000 KN x 3100mm Year of construction 2000 Machine hours Not visible Power 100 tons Working range 3100mm DNC 80 control system Mains voltage 400V Connected load 5.5kW Machine weight 7000 kg Mains Frequency/Frequez 3~50Hz Max Pre-Fuse 20 AT Max Compressed Air 8Bar Max closing speed mm/s 200mm/s Pressing speed 1-10 Max stroke 215mm Max stop time 110mS Min safety distance 350mm Technical condition Fully functional
Pipe bending machine Type: Gigalus 130 S Producer: Mewag Year: 2014 bending and shaping of 3D pipes with a diameter of min. 40mm and wall thickness min. 4mm. Based on CAD drawings, it converts the exact shaping of pipes into the final form, including the simulation of bending angles. Engine power: 40kW max.radius: 450mm bending accuracy: +/- 0.2 degree length accuracy: +/- 0.5 mm Machine in good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines
maximum number of results exceeded
please refine your search
