horizon pf 40 used for sale

Baking press, meaching, semi-automatic stuffing machine for pieces of meat in fibrous, for fibram wraps, etc. and / or elastic net and collagen up to 170 mm in diameter. Use round molds, there are several sizes ask for information. Standard bagging chamber of 500 mm. electropneumatic operation. Manufactured by Possenti, model F-PFT5- 000. Used equipment, its condition is excellent, fully restored and with guarantee.

Gebrauchte Fritteuse für 60 Donuts. Manuell. Für weitere Informationen kontaktieren Sie mich bitte

Proficoater Hymmen PFC-S 1400 Painting system for the application of UV-curing lacquer systems with integrated roller troweling machine Conforms to EC Machinery Directive Coating: from above Operating side: left, Working height: 900 +/- 50 mm, Nominal width Application roll: 1,400 mm, Effective usable width: 1,300 mm, Delivery height: max. 100 mm, Feed rate: 6 - 30 m / min, drive control, Mains voltage: 400 V, 50 Hz, Protection class: IP 54, Power consumption: approx. 16 kW, Fuse: 63 A on site, Total length: approx. 5.660 mm, Total width: approx. 2,700 mm, Part speed: approx. 12 m / min in reversing mode, Approx. 8 m / min in the flow, Plates: wood panels, Plate length: min. 300 mm, Plate weight: max. 80 kg / m², Varnish: UV paints solvent-free 60 140 DIN4sec, 3 - 40 g / m² depending on the lacquer system and selected program, EX range: The application machine ELX-S is designed for ...

Pfannenberg DTI 6401, air conditioner 400 VAC dimensions (W x H x D) 485 x 1536 x 278mm, DTI 6401 400V SC 7035, control cabinet fan, Operating voltage:400 V/AC Air flow:282 m³/h, spring-loaded connectionwidth:485 mm, Weight: 69 kg, power 2000 W With temperature control: Yes

Power contactor SQUARE D CLASS 8502 PF3. 22 63 A 660 V AC Control voltage: 220 V AC 50 Hz / 240 V AC 60 Hz 3 N/ spare part for wood sanding machine PAUL ERNST KKB/K VBS1300x2500 !, used, tested ! Dimensions: 105 x 75 x 140 mm

Lubrication pump WOERNER PFZ-A/0.12 New ! Dimensions: 130 x 120 x 100 mm

Lubrication pump WOERNER PFZ-M 1,25/5/P 1.13/P V: 1,25 cm3/U pmax: 210 bar New ! Dimensions: 190 x 190 x 160 mm

Lubrication pump WOERNER PFZ-M 1,65/4/P 1.16/P V: 1,65 cm3/U pmax: 210 bar New ! Dimensions: 190 x 190 x 160 mm

ET module, signal box, position indicator, limit switch box ROTECH PF3EVFAZ Sensors: 2x PEPPERL+FUCHS SB3,5-E1 New, with documents ! Dimensions: 160 x 80 x 90 mm

Hydraulic cylinder, double-acting HAWE PF80/55 Piston diameter: Ø 80 mm Rod diameter: Ø 55 mm stroke: 180 mm Flange diameter: Ø 178 mm mounting opening: Ø 130 mm rod thread: M42 x 1,5 used ! Dimensions: 410 x 180 x 180 mm

Hydraulic cylinder, double-acting HAWE PF65/45 Piston diameter: Ø 65 mm Rod diameter: Ø 45 mm stroke: 250 mm Flange diameter: Ø 158 mm mounting opening: Ø 110 mm Rod thread: M42 x 1,5 used ! Dimensions: 480 x 160 x 160 mm

Filter fan, control cabinet fan PFANNENBERG TYPE: PF2000 impeller diameter: Ø 100 mm V: 56 m3/h Motor : 19 / 18 Watt 230 V 1AC 50 / 60 Hz used, tested ! Dimensions: 150 x 150 x 80 mm

Pistofon RFT, MEASURING ELECTRONICS OTTO SCHÖN DRESDEN PF101 TYPE 00003 MKD PF101-32673 Sound frequency: approx. 180 Hz Sound pressure level: approx. 118 dB in wooden box New ! with documents and test report ! Dimensions ( Pistofon ): Ø 50 x 200 mm Dimensions ( barometer ): Ø 103 x 40 mm Dimensions ( wooden box ): 360 x 130 x 100 mm

Digital flow switch for air SMC PF2A712H-F20-69 Measuring range: 600 - 12000 l/min Operating pressure: 0,,0,1 - 1.5 MPa ( 1.0 - 15.0 bar ) Output1: max 80 mA Output2: 4 - 20 mA Operating voltage: 24 V DC Installation length ( without pipes ): 220 mm Connections: G 2 with reductions to 3/4 approx. 1.8 m Connection cable New ! Dimensions ( without pipes ) : 220 x 75 x 115 mm Dimensions ( with pipes ) : 680 x 150 x 115 mm

Digital flow switch for water SMC PF3W740-04-E-M Measuring range: 5 - 40 l/min Operating pressure: max. 1,00 0 MPa ( max. 10 bar ) Output1: max 80 mA Output2: 1 - 5 V Operating voltage: 12 - 24 V DC installation length ( without pipes ): 98 mm Connections: G 1/2 female thread Material: Edelsahl, Kunststoff mit Anschlusskabel Neu ! Dimensions ( without cable ) : 98 x 38 x 70 mm

Horizontal flow pack packaging machine. Manufactured by PFM Spa. Swift model. Speed: (up to 100 mechanical cycles per minute). Machine dimensions: 2575 mm long x 1037 mm wide x 1800 mm high. Package dimensions: minimum length 80 mm - maximum 350mm, minimum width 15 mm - maximum 200mm and minimum height 1mm - 60mm. General technical data of the machine: weight 310 kg, power consumption 3.5Kw, voltage 380V three-phase 50Hz.

Surface measuring system, roughness gauge MAHR perthometer PFM Art.Nr. 6720907 Roughness depth sensor: Ø 8 mm approx. 1.4 m Connection cable with plug Matching roughness depth probes - see ME888, ME889, ME890, ME891 ! New ! Dimensions (without cable): 112 x 24 x 24 mm Dimensions (packaging): 120 x 60 x 30 mm

Surface measuring system, roughness gauge MAHR perthometer PFM Art.Nr. 6720907 Roughness depth sensor: Ø 8 mm approx. 1.4 m Connection cable with plug suitable roughness depth sensors - see ME888, ME889, ME890, ME891 ! used, tested ! Dimensions (without cable): 112 x 58 x 34 mm Dimensions (packaging): 120 x 80 x 40 mm

For sale lot of machines, main for thread grinding, and gear grinding, also horizontal pfauter, best price for bundle. Reishauer NRK Reishauer US x2 Klingelnberg HNC 35K Wmw hinterdrehmachine x2 Reinecker hinterdrehmachine Kapp grinding Wmw niles 35/20-29 Horizontal Pfauter Lindner grinding x2 Klingelnberg gear test machines

Bakery and shop fittings Pforzheim Dismantling planned from 08.9.2024 to 30.September 2024 everything must be outside. Machinery and equipment are bakery condition, therefore no guarantee and warranty. Prices are net price. Dismantling and transport is organised by the buyer. Please send me an email with the machine number.

Description: serial number: 28793 control: SIEMENS Sinumerik 840D  , max. wheel diameter: 130 mm wheel width: 25 mm min. module: 0.5 max. module: 4 stroke rate: 500 - 2500 strokes/min. stroke: 30 mm shock spindle diameter: 85 mm total power requirement: 48 kVA  , please also have a look at the video and the PDF document of this machine max. wheel diameter: 130 mm, module min./max.: 0.5 / 4, gear width: 25 mm, control: SIEMENS Sinumerik 840D, stroke length max.: 30 mm, no. of strokes: 500 - 2500 rpm, total power requirement: 48 kW, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,400 x 3,000 mm

Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours

Surface-mounted luminaire, industrial lamp, wall and ceiling lamp SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm

Surface-mounted luminaire, industrial lamp, wall and ceiling luminaire, with emergency luminaire SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm

Control box, pre-wired PAGUS 400 x 400 x 200 mm 4x push button 1x toggle switch 4x indicator lights 1x power contactor 1x power contactor with auxiliary switch and thermal motor contactor 3x miniature circuit breaker control box: 400 x 300 x 200 mm used, checked! Dimensions: 420 x 300 x 240 mm

Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 400 x 400 mm Working height: 60 mm Groove width: 14 / 24 mm Dimensions: 400 x 400 x 60 mm

Pneumatic cylinder FESTO DNGU-32-400-PPV-A S3 158098 stroke: 400 mm rod diameter Ø 12 mm Dimensions: 545 x 95 x 50 mm used tested.

grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm working height: 115 mm all threads on clamping surfaces M12 x 1,75 Pitch: 50 mm holes ( top ): Ø 20 / 50/55 mm holes ( bottom ): 2x Ø 25 mm width guide ( bottom ): 160 / 200 / 300 mm Height guide (bottom): 55 / 30 / 65 mm spare part for machining center HECKERT CWK400 ! used, tested ! Dimensions: 550 x 400 x 115 mm

grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes (top): Ø 20 / 50 mm holes (bottom): 1x Ø 32 mm, 2x Ø 25 mm, 3x Ø 18 mm bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm used, tested ! Dimensions: 490 x 400 x 95 mm

Grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes ( top ): Ø 20 / 50 mm fixing bolt ( top ): Ø 50 x 10 mm holes ( bottom ): 1x Ø 32 mm, 2x Ø 25 mm thread (bottom): 4x M16 x 2.0 bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 490 x 400 x 105 mm

Pneumatic cylinders, round cylinders, double-acting NORGREN RA/8063/M/400 stroke: 400 mm piston diameter: Ø 63 mm rod diameter: Ø 20 mm rod thread: M16 x 1.20 5, Length: 30mm pmax: 1.0 -16.0 bar New ! Dimensions: 600 x 76 x 76 mm

Pneumatic cylinder NORGREN RA/8160/M/400/H stroke: 400 mm Rod diameter: Ø 40 mm pmax: 16 bar Pivot: Ø 40 mm New Dimensions: 750 x 280 x 180 mm

Pneumatic cylinders, standard cylinders FESTO DNG-40-400-PPV-A 36343 DSBG-40-400-PPVA-N3 1646557 stroke: 400 mm rod diameter: Ø 16 mm pmax: 12 bar New ! Dimensions: 565 x 55 x 55 mm

Fittings with plug-in connection REXROTH MECHMAN Series QR1 Standard 10 x straight fitting 212 100 405 0 10 x elbow fitting 212 200 405 0 thread: M5 hose diameter: Ø 4 mm fitting set consists of - 20 fittings ! New ! Dimensions: 60 x 60 x 65 mm

pneumatic cylinder, standard cylinder, double-acting, with flexo coupling FESTO DNC-50-400-PPV-A 163379 stroke: 400 mm rod diameter Ø 20 mm rod thread: M16 x 1,5 pmax.: 12 bar with flexo coupling FK-M16X1,5 used, tested ! Dimensions: 740 x 65 x 65 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DNC-40-400-PPV 163361 stroke: 400 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25 pmax: 12 bar spare part for machining center HECKERT CWK400 D !, among others! used, tested ! Dimensions: 565 x 54 x 54 mm

Linear actuator FESTO DGPL-40-400-PPV-A-B-KF-GK-SH 175136 stroke: 400 mm piston diameter: Ø 40 mm Carriage: 167 x 82 mm pmax: 8 bar New ! with documents ! Dimensions ( Linear actuator ): 700 x 97 x 91 mm Dimensions ( packaging ): 730 x 200 x 150 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS working surface: 400 x 400 mm height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate HAHN & KOLB, IFA ASCA Working surface: 400 x 400 mm DIN 876 height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm

fitting to Orion or Zenit filters, without seals Number available (price per tank): 70 material: NORYL  40x 40 customs no.: 84212200 More then 300 machines new and second hand on our seema .de

Clamping bracket STANKO clamping surface: 400 x 400 x 64 mm bridge width: 30 / 88 / 90 / 87 / 33 mm Groove width: 18 / 32 mm Groove depth: 35 mm Mounting surface: 400 x 270 x 35 mm 2x slotted hole: Ø 20, Length: 120 mm used, tested ! 85 KG (heavy duty) Dimensions: 400 x 400 x 270 mm

Compact cylinders, pneumatic cylinders, double-acting FESTO DNC-32-400-PPV-A 163315 1376429 piston diameter: Ø 32 mm stroke: 400 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar with flexo coupling: FK-M10X1,25 ( 6140 ) used, tested ! Dimensions: 625 x 45 x 100 mm

Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 550 x 450 x 195 mm, weight approx.: 90 kg

Glycerine pressure gauge, Bourdon tube pressure gauge, pressure gauge, pressure gauge with Bourdon tube, 2pcs WIKA 0 - 400 bar EN837-1 Measuring range: 0 - 400 bar Ø 63 mm Class: 1,6 scale division: 20 bar Process connection: G 1/4 B Mounting position: horizontal Connection position: rear Material: Housing: 1.4301, Measuring system: Cu alloy, Connection: Brass Other quantities on request ! New ! Dimensions ( pressure gauge ): 68 x 60 x 68 mm

stainless steel, for Orion filter  More then 300 machines new and second hand on our seema .de

Cooling unit Bitzer 4P-10.2Y-40P with condenser condenser for TK or Plus cooling. For more information call 00436641838175 or Info@frigocom.at

Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling table (belt type ) Strecher force: 200-300 ton Die oven Finsihing table and saw Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER Hot saw Operation desk PLC type (need sone ...

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.

Extrusion press with 400 mm Ø, 55 kW drive, hard cast screw and pre press PZSVG 40 (built 1996, 15 drive), on 4 hydraulical posts. Complete, incl. 1 set spare parts (replacement screw and windlass).