homag saw used for sale

Description: Rubber pads conveyor belt renewed approx. 2022 Annual maintenance by HOMAG incl. various new parts (see photos) Second glue pot (serviced annually) Single-sided machine for joint trimming of straight workpiece edges, gluing and finishing of various edge materials from the roll or as strips, up to 20 m edge thickness, with longitudinal and transverse throughfeed. Fixed stop side on the left. BRIEF DESCRIPTION OF THE BASIC EQUIPMENT: BASIC MACHINE WORKPIECE TRANSFER DEVICE - TOP PRESSURE CONTROL power control PC22 FREE SPACE Joining unit GLUING PART A20 BASIC for rolls up to 3 mm and strips up to 20 mm NOISE PROTECTION CAPPAGGREGATE FREE SPACE for further processing units BASIC MACHINE: Continuous machine stand for setting up the processing units Workpiece support with extendable roller rail approx. 800 m Glue roller drive for feed stop Glue container lift ...

Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 1998 SKU:4-060-24-0165 2.056.10.3021 Saw blade: ø180 mm Nmax: 10,000 rpm

Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.

Description: vertical cut max 2500 mm maximum cutting length 3660 mm saw velocity Disco 300 mm 5,5 Kw 2855 rpm incisor velocity Disco 120 mm 0,55 Kw 2820rpm postforming saw group Disco 300 mm 0,75 kw, 2803 rpm motor power 6,25 Kw The machine is equipped with a 3rd motor that cuts and prevents 'tearing' of the material voltage 380 dimension 4800x1700x2670 mm weight 1900 Kg cutting length: 4,200 mm, cutting height: 2,500 mm, Approx. Onsite Dimension. (l x w x h): 4,800 x 1,700 x 2,670 mm, weight approx.: 1,900 kg

Description: • Horizontal panel saw • Serial number 0-341-03-0163 • Total installed power 14 KW • Cutting width 3200 mm • Cutting depth approx. 3200 mm • Cutting height approx. 50 mm • 5 Grippers • Main saw blade: max. diameter 300 mm and motor 5.50 KW, rotation speed 4550 rpm • Scoring saw blade: max. diameter 150 mm and motor 0.55 KW, rotation speed 5100 rpm • Saw carriage feed speed: 6 - 32 m/min • Saw carriage return speed: 32 m/min • Pushers feed speed: 18 m/min • Front air tables: one fixed of dimensions 1800 x 600 mm and 2 movable of dimensions 1800 x 600 mm • Control CNI VIC 800 Approx. Onsite Dimension. (l x w x h): 5,250 x 6,200 x 2,070 mm, weight approx.: 4,000 kg

Manufacturer: Homag Getriebe Verstellung Oberdruck/Maschinenhalter Bett, Type: auf KF Homag, FREETEXT1: 3 Verstellgetriebe, FREETEXT2: 4 Winkelhalter Bett,

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, trimming units from the BRANDT KM 36 edge banding machine -Motors: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price / fee: complete -Dimensions: 500/560 / H670 mm -Weight: 51 kg

Aggregate for 4-Achs CNC to the extension for the 5-th axis

Board repair line with double end profiling line in top condition Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: Feeding station with feeding rollers, Automatic vacuum lifting table for lengths up to 6 m Conveyor systems Repair line 1 Turning station Transfer service Repair line 2 automatic vacuum lifter for stacking (6m) Stacking roller conveyor Control cabinet with machine control Profilfraessanlage Stacking Tables; very well

Edge gluing machine - see picture Next: Edge gluing machine NEY-SENIOR SKM 100/3 gemaess Pictures

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

ID-Nr. 1-056-11-0400

CAN axis motor -Type: PSE 4225 DP-M -Dimensions: 175/115/H65 mm -Weight: 2 kg

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

Single sided postforming line, capable of doing L - and U profiles, with or without insert. Workpiece thickness: 16 to 60 mm. Min. workpiece width: 150 mm. Workpiece overhang: 70 mm. Max. laminate overhang: 105 mm. Feed speed 3 - 18 m/min. Fence side at the left Equipment: Squaring and shaping part: 1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate 1 x scoring, motor 1 kW, top position 1 x milling unit for the laminate when doing U profiles 1 x laminate support Postforming part 1 x blow cleaning nozzle 6 x glue nozzle for the glue application 2 x glue roller 9 x IR heating, each 2,2 kW 2 x Hot air blower, each 10 kW 1 x Basic postforming pressure zone for L-profiles, using rollers 1 x Basic postforming pressure zone for U-profiles, using rollers 1 x VF postforming pressure zone for special profiles, using pressur ...

This HOMAG BAZ20/50/16/K Wood working machine was manufactured in the year 1998. It is equipped with a PC 85 mit SPS control unit. The machine has a spindle speed of 17500 rpm.

Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness  ...

Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.

Exchange units for contour milling HOMAG

Sanding unit Make: HOMAG Type: PS10

Oscillating buffing unit HOMAG

Buffing unit - 1 motor

Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm.

Length: 11,250mm, width: 5250mm, height: 2600mm.

Max. workpiece dimensions: 3000x1050mm, connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm.

Current: 50A, nominal voltage: 400V.

Current: 63A, nominal voltage: 400V.

Connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm.

With feeder and destacker Wemhöner 184.

Working width: 1250mm, working height: 100mm, with scoring and milling aggregate, with control cabinet, without documentation, manufacturer unknown, either Homag or Bäuerle.

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...

Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.

1 Quickmelt incl. evaluation device level. Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below.

Key data: 4500 , 1300 , 485

CNC machining center VEGA 5X 5 axis center

Forderband - Wood waste disposal Stainless steel strap, with carrier Horizontal strip: 1,500 mm Total length 3,200 mm Climbing belt: 2,600 mm at 1,600m elevation