hollow spindle used for sale

turning diameter over bed: 630 mm turning diameter over slide rest: 430 mm turning length: 1000, 1500 - 5000 mm spindle bore: 103 mm turning dia. in gap: 830 mm throat: 400 mm spindle turning speed - stepless: 15 / 11,5 - 1250 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: 60 - 1/4 TPI Whitworth-thread: 240 - 1 DP bed width: 500 mm spindle cone: 120 Metrisch number of feeds: 64 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 90 mm : MT5 quill stroke: 230 mm total power requirement: 11 kW weight of the machine ca.: 3010 kg Very robust European lathes come from the ZMM program. The lathes are perfect for all industrial applications. These machines are very popular in 93 countries around the world. The CU 630 model is available in the turning lengths ...

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: 320 mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Back grinder for JUNG surface grinding machines, etc. Operating voltage: 24 volts. Magnetic plate: 110 x 75 mm. Angle adjustment: 0 - 2 degrees. Dimensions: 500 x 200 x 125 mm high. In original JUNG wooden cassette, Tools and operating instructions. Weight: approx. 25 kg. Shipping with DHL possible in consultation. Visually, good little used condition. The device can be visited in consultation and is immediately available. Please also note my other entries.

Grinding length: 1500 mm Grinding width: 500 mm Grinding height: 350 mm Wheel diameter: 10 mm Spindle power: 20 kW CNC Brand: Fanuc CNC Model: Fanuc 210-M X - Travel:   1500mm Y - Travel:   500mm Z - Travel:   350mm Table Length: 1500mm Table Width:  500mm Table load:   700 Power:        20kW Speeds:       2800Rpm Coolant system:Yes Length:       6000mm Width:        2400mm Height:       2200mm Weight:       7000kg

CNC flat and profile grinding machine Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7,100 kg

Codice: 0222 - AI

Multi-spindle drilling machine make STEINEL type BGS 140Machine -No: 9482Technical specifications:Number of spindles max .: 12 pieces:Articulated spindles installed: 3 pieces8 spindle speeds: 355 - 2800 rpm:Motor power: 1.2 kWDimensions L x D x H: 500 x 700 x 1900 mmWeight: 172 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic articulated spindle drilling machine make WÖLFEL type GBK 20Fabr. -No: 102028, built in 1975Technical specifications:Number of articulated spindles: 4 pieces18 spindle speeds: 75 - 1600 rpmTable size with channel: 800 x 660 mmTable adjustment via: hand crankHeight adjustment of the drilling head: hydraulicDrive power: 3.3 / 4.4 kWExternal dimensions of the machine: 800 x 1150 x 2900 mmWeight approx: 2000 kgWith- separate control cabinet 1000 x 550 x 1150 mm- separate hydraulic 700 x 400 x 1050 mm- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi-spindle and tapping machine make WÖLFEL type GBK 10Machine -No: 101015, built in 1985Technical specifications:Hole pattern diameter: 340 mm18 spindle speeds: 140 - 3000 rpm.Max drilling stroke: 400 mmTable size: 550 x 460 mmDistance table / drill headi. top position: 1300 mmDrive power: 3 kWExternal dimensions: 1300 x 850 x 2850 mmwith- extensive accessories- separate control cabinet- separate hydraulicsused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic multi-spindle drilling machine make BURKHARDT + WEBER type HGB 100Order.-No: . 12141100 year of manufacture 1984Technical specifications:Feed :3-1400mm/min.Table size dia.: 550 mmGuide plate: 600 x 600 mmNumber of taps:412 speeds: 140 - 2800 rpm.Dimensions approx.: 2000 x 1800 x 2800 mm Hydraulic dimensions approx.: 1500 x 1000 x 2200 mmControl cabinet dimensions approx.: 2100 x 1100 x 700 mmWith- Automatic- separate hydraulics- control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand Screw Press Fabr. OSTERWALDER Type HSP 100Machine -No: 771504, built in 1977Press force: 10 tPassage between the uprights: 400 mmTable size: 450 x 380 mmInstallation height: 370 mmStroke: 370 mmlateral. Passage: 150 mmTable height: 80 mmSize of the diarrhea hole i. Table: 160 mmOutside dimensions: 900 x 900 x 2130 mmWith- pneum. loweringused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turning pin press make MATRAPressing force: 1.5 tProjection: 200 mmInstallation height: 300 mmTable diameter: 180 mmMandrel diameter: 55 mmOutside dimensions (without base) approx: 500 x 280 x 750 mmWith- UnderframeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Very nice model of a:Friction wheel forging press make BERRENBERG type RSSP 280/800Technical data from the original:Spindle diameter: 280 mmPressing force: 800 MPMaximum force: 1600 MPWorking capacity: 7000 MPMax. Stroke rate: 40 H / min.Size of the model approx: 420 x 260 x 540 mmSize of the original approx: 4200 x 2600 x 5400 mmMade by a training workshop in support of the sale of such a machine in the Soviet Union.Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Foot pendulum press Fabr. LUXTable size: 300 x 175 mmDiarrhea hole: 60 mmProjection: 110 mmOutside dimensions approx: 550 x 570 x 1450 mmused, older, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spindle press make RICHTER type HSP 25Machine -No: 510 built in 1953Max. Press force: 25 tTable size: 540 x 400 mmBear size: 420 x 200 mmSpindle diameter: 70 mmStroke: 180 mmExternal dimensions approx: 1200 x 1200 x 2000 mmused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual screw press manufactured by VEB Morgenröthe, type PSHZ 25Masch. -No: 3682 Year of construction 1963Technical specifications:Max. Pressing force: 25 tTable size: 500 x 430 mmBear size: 500 x 200 mmInstallation height: 430 mmSpindle diameter: 70 mmWeight approx: 950 kgExternal dimensions approx: 1450 x 1450 x 1900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand spindle press make RAS type 300/20-No: 108/7 built in 1957Technical specifications:Max. Printing capacity: 20 tPassage: 340 mmTable size: 250 x 620 mmStroke: 200 mmSpindle diameter: 60 mmColumn diameter: 70 mmRam area: 330 x 110 mmInstallation height: 260 mmWith- baseusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size: 240 x 210 mmProjection: 165 mmDistance table - ram: 250 mmExternal dimensions L x W x H: 400 x 310 x 640 mmColour blueused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size drm. : 200 mm2 recesses in the table: 30, 60 cm wideProjection: 265 mmDistance table - ram: 390 mmExternal dimensions L x W x H: 600 x 280 x 870 mmColor grayused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-column screw press make probably WMWTechnical specifications:Pressing force approx.: 10 t (estimated)Handwheel diameter: 800 mmProjection between the uprights: 400 mmTable size: 350 x 440 mmHole in the table Drm. : 100 mmRam: 130 x 110 mmInstallation height: 300 mmExternal dimensions L x W x H: 900 x 500 x 1780 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size Drm. : 200 mmThroat: 250 mmDistance table - ram: 300 mmMandrel diameter: 45 mmExternal dimensions L x W x H: 550 x 220 x 700 mmColor orangeWith- Base 1000 x 500 x 830 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Arbor press with ratchet drive make AGEO type DP 2Fabr. -No: 1231, built in 1964Technical specifications:Pressure force: 1.5 tProjection: 220 mmInstallation height: 350 mmRam diameter: 50 mmRam stroke: 350 mmWeight with underframe approx: 130 kgwith- Lever with ratchet- underframe- Support plate with slotsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 1500 (2m, 3m, 4m, 5m, 6m) mm turning dia. in gap: 850 mm bed width: 560 mm spindle nose: 11 spindle bore: 103 mm transmission ratio: 3 spindle turning speed - stepless: 9-55, 37-220, 220-1320 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 kW weight of the machine ca.: 4170 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these ...

turning diameter over bed: 760 mm turning diameter over slide rest: 520 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 950 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 (18,5) kW weight of the machine ca.: 5800 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. ...

turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 850 mm bed width: 560 mm spindle nose: 11 spindle bore: 103 mm transmission ratio: 3 spindle turning speed - stepless: 9-55, 37-220, 220-1320 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 kW weight of the machine ca.: 5500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these  ...

turning diameter over bed: 860 mm turning diameter over slide rest: 620 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 1050 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 90 mm thread - inch: 60 - 1/3 inch. thread - module: 0,125 - 22,5 Whitworth-thread: 240 - 1 1/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 432 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 18,5 kW weight of the machine ca.: 6300 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected.  ...

I sell a router for Koperfräsen Sicar, built in 1998. Milling head with motor Swivel + - 45° Spindle holder fi.10mm Electric motor: 1.9kW / 2800 rpm -> 18,000 rpm at the spindle 1.5 KW / 1400 rpm -> 9,000 rpm on the spindle Pneumatic connection the milling cycle, pedal operated. Made in Italy.

Fanuc touchscreen control Nikken 4th axis Twin rotary diamond disc unit - this unit is mountednbsp;vertically with a slide-way adjustment to cater for the differing grind heights. The unit is designed to mount twin opposing discs to support dressing in both directions and provide support for the 6 thou diamond tip radius.nbsp; Longitudinal travel X-axis (autom.): 1420 mm Cross-travel Y-axis (autom.): 750 mm Dimensions of the table: 1200 x 600 mm Max dia grindingstone: 457 x 100 x 203,2 mm Spindlespeeds: 10 > 1680 rpm Motorpower: 22 kW Length: 6202 mm Depth: 3445 mm Height: 2855 mm Weight: 11,8 ton

turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Siemens 840 C controller • Location I + III + IV + VI: Longitudinal and transverse slide • Position II + V: CNC slide and longitudinal slide Bvxhlj3gi3 • Advance position VI • Interceptor Position VI • KS system (emulsion) • Loading magazine Cucchi model Multi-6 156C15, YOC 2015, • Ruez hinge belt conveyor in the machine bed • Hinge conveyor Knoll 280 S-1/40 ID 26565 (outside) • Electrostatic separator ISI RON/A 2500A, ID 26295 • Without further accessories / tools • CUCCHI BLT Model Multi -6 YOM 2015

vertical adjustment: 150 mm working area: 400 x 150 mm 2825 rpm Dia ceramic grindstone: 175 mm Motorpower: 2,2 kW Length : 800 mm Depth: 520 mm Height: 1300 mm Weight: 160 kg

Description: compressed air operated tool holder: SK 40 incl. case and accessories Approx. Onsite Dimension. (l x w x h): 500 x 500 x 100 mm, weight approx.: 20 kg

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

number of spindles:6 spindle passage:40 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL

number of spindles:8

Asynchronous motor, main spindle drive, 2AD100C-B05OB1-AS03-C2N1, R911246799, Rexroth, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. - Asynchronous motor, main spindle drive - Power: 12.6 - 18.9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW

number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW

Spindle drive, Simotics, 1PH8103-1MG02-0BG1-ZNO.YF, Siemens, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Siemens and is therefore in a mint condition. - Asynchronous motor, spindle drive - Power: 7,5 KW - 380V / 3 pol. - max. 9000 rpm - max. 77 Nm - max. 42 A - 47 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Asynchronous motor, main spindle drive, 2AD100C-B35OA1-AS03-A2N1, R911264223, Rexroth, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. - Asynchronous motor, main spindle drive - Power: 12,6 - 18,9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

turning speeds:10000 U/min output:22 kw weight approx.:20 kg transmission ratio:1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case.

number of spindles:6 spindle passage:67 mm cam controlled multi spindle automatic lathe six main spindles D=67mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:81 mm cam controlled multi spindle automatic lathe six main spindles D=81mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:100 mm cam controlled multi spindle automatic lathe six main spindles D=100mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Equipped with 4 spindle drill head

1 set of boring bars for main bearing boring mill, carriage via cone, sleeve. Dimensions: DxL 20x940 mm 27x1100 mm 31.5x1400 mm 39.7x1700 mm Sale preferably as a set Price on request

equipped with UNIVER 508 feeder

1 set of hard chrome-plated boring bars for main bearing boring mill, carriage via groove. Dimensions: DxL 26x1250 mm 32x1850 mm 45x1850 mm Sale preferably as a set Price on request

v.v. tenoning machine carriage with crosscut guide; length approx. 660 mm; "Aigner" milling guides and feeding device; incl. flexible suction hose and various accessories (ATTENTION! Piping not included!)

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm