We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,262 used machines on RESALE, but how to find them? Machine Search
used
Description Hoesch MFD CNC Heavy Duty Lathe with Siemens Control Details Face plate Ø 2,006 mm Center height 1,499 mm Reversible saddle Ø 2,235 mm Circulation diameter over bed Ø 2,997 mm Turning length 12,192 mm min/max workpiece held in chuck Ø 457 mm/1,600 mm Maximum workpiece weight 110 tons Speed range 0.5-140rpm (300hp engine) Feed range 0.0118-7.08"/rpm Permanent capacity Ø 356-902 mm Copy depth 508 mm inductive Maximum cutting force 30,000 Nm Double drum with constant capacity Ø 356-902 mm 50 Ton Capacity, Roll Type
used
used filter press Hoesch - cast iron small filter press from cast iron to the filter of liquids solutions, dirty waters, oil, biooil, rapeseed oil-used - with handwheel - downpour filter records 30x30 cm - with collective tub - tilled manual pump - dimension ca 1,00x0,5x0,7 m - weight approx. 300 kg with hand pump the arrangement stands to the rent and for the purchase at the possession.
used
turning diameter over bed: 2100 mm turning diameter over slide rest: 1300 mm turning length: 6800 mm workpiece weight: 25000 kg main drive motor: 140 kW Control: Siemens type: 840 C faceplate: 1100 mm bed width: 2500 mm steady: 800 mm steady: 800 mm steady: 800 mm steady: 600 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 2000 mm turning diameter over slide rest: 1050 mm turning length: 7000 mm speed: 1,6 - 250 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Turning diameter: 1400 mm Turning length: 2600 mm Spindle bore: 0 mm Motor power: 0 HP/kW CNC Brand: Siemens CNC Model: 810 Make Hoesch DR 14 Type DR 1400 N - 1 DR Year 1992 CNC Rail wheel lathe wheel set lathe Centre height (mm) Chuck = 1.400 Center distance (mm) Swing = 1.400 Spindle bore DBC = 2.600 Work load = 5000 Kg Siemens 810 Chip conveyor
used
swing diameter: 436 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m It is a unit price. There are 6 pieces available. For crankshaft work. The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine dimensions 15000x4000 mm Bed width 4300 mm Bed height 800 mm Machine weight 300000 Kg Max. load of a machining part fixed between centers without steady rests 150000 Kg Max. load of a machining part fixed between face plate and steady rests 300000 Kg Max. machining diameter 3700 mm Min. machining diameter 300 mm Face plate diameter 2700 mm Max. machining part length 15000 mm Distance between quill and bed guideways 1900 mm Face plate speed range (on 4 steps) 0.315-100 rpm Max. rotation face plate torque 30000 daNm Max. torque to stress between jaws for max. load of 150000 Kg 70000 daNm Turning support (4 tool holders) : Max. turning force 30000 daN Cross travel (ball screw) 1400 mm Cutting blade max. length 1020 mm Working feed range (longit. and transv.) 0.1-4000 mm/min Rapid feed range (longit. and transv.) 5000 mm/min Tool holder dimensions 120x60x35 mm Ta ...
used
General SKU132X770 LocationBarneveld MakeEberhard Hoesch & Söhne, Düren TypeGK6/3500/SO No.32 6333 Year of construction1988 Main Features MaterialHastelloy Volume3500 Ltr. Motor9.2 KW Specified Features - Stirring vessel MaterialStainless steel 2.4610 (Hastelloy C-22) Open stirring vessel(1x) Capacity3500 Ltr Vessel sizesdia. 1800x1300mm Dished bottomcheck Flat top sidecheck With covercheck Manhole800x450mm Outletdia. 175mm With jacketcheck With propellor stirrerHoesch Gegenstromrührer With gate type stirrercheck Motor9,2 KW + 7,5 KW, 380/660 Volt Speed mixing shaftvariable (12-49 prop./ 21-87 Rpm gate)Stirring vesselsHoeschStirring vessels > Stirring vesselsBrand > Hoesch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...
used
used
DC motor with forced ventilation VEM MFD 60.1-F 03 ( MFD60.1-F03 ) TGL 39434 ( TGL39434 ) 0,3 / 20,2 / 24,6 kW 20 / 4500 / 3700 rpm 39 / 400 V external excitation 270 V forced ventilation 0,37 kW 220 / 380 V wave: Ø 58 mm used, tested ! Dimensions: 900 x 360 x 470 mm
used
DC motor with forced ventilation VEM MFD 132.1-F 02 ( MFD132.1-F02 ) TGL 39434 ( TGL39434 ) 0,15 / 20,8 kW 20 / 2840 rpm 30 / 400 V external excitation 330 V forced ventilation 0,18 kW 220 / 380 V Welle: Ø 42 mm used, tested ! Dimensions: 800 x 530 x 360 mm
used
DC motor with forced ventilation VEM MFDr 160.2-F 02 ( MFDr160.2-F02 ) TGL 39434 ( TGL39434 ) 0,4 / 15 / 19 kW 20 / 2850 / 2250 / 950 rpm 58 / 400 / 400 V external excitation 270 V forced ventilation 0.37 kW 220 / 380 V wave: Ø 55 mm shaft for tachogenerator: Ø 16 mm Flange: 320 x 320 mm used, tested ! Dimensions: 870 x 650 x 400 mm
used
DC motor with flange for forced ventilation VEM MFD 132.2-900 ( MFD132.2-900 ) TGL 39434 ( TGL39434 ) 0,2 / 10 / 16,4 kW 20 / 5000 / 3000 / 1650 rpm 42 / 400 / 400 V external excitation: 270 V flange for forced ventilation: 150 x 150 mm Flange: 250 x 250 / 270 x 280 mm used, tested ! Dimensions: 760 x 290 x 430 mm
used
DC motor VEM, ELBTALWERK MFD 132.4 - 900 ( MFD132.4-900 ) TGL 39434 ( TGL39434 ) 18,4 / 14,0 / 0,25 kW 1500/3000 / 4500 / 20 rpm 400 / 400 / 41 V DC external excitation: 270 V DC shaft: Ø 42 mm flange: 260 x 260 mm pulley: Ø 165 mm, 8x belt profile: 10 / 2 x 12 mm used, tested ! Dimensions: 940 x 290 x 360 mm
used
DC motor with external ventilation VEM MFDr 132.1-F 01 ( MFDr132.1-F01 ) TGL 39434 ( TGL39434 ) 0,15 / 20,8 kW 20 / 2840 rpm 30 / 400 V external excitation 330 V Forced ventilation: 0,18 kW 220 / 380 V Welle: Ø 42 mm Flange: 250 x 250 mm used, tested ! Dimensions: 800 x 540 x 350 mm
used
Verbufa forming machine, type: MFD 400, type number: 51276-C-0012, serial number: 2085952, year of construction: 2008, 230 V, 50 Hz, 10 A, dimensions: 1400 mm x 1500 mm x 1700 mm. Including 2 crates with parts.
used
CNC bending line for bending sheets up to a thickness of 8 mm and a width of 2500 mm. The machine is being sold due to its lack of use, it was practically unused. the machine is connected, functional and can be demonstrated in action.
used
Product number: 2728 Type: MFD Model: 51670-C-0014 Serial number: 208280 Year of construction: 2010 Working width: 400 mm Lanes: 4 pieces Product size: max 55 mm Outfeed height: 1150 mm Power: 230VAC, 50Hz, 2kW Dimensions: 950 x 1200 x 1800 mm For forming filled products
used
Plymovent Mobile Welding Fume Extractor Model MFD The MFD is a mobile welding fume extractor with a disposable filter and integrated fan. Designed for occasional to regular dry welding. Dimensions W x D x H : 80 x 120 x 120 cm Weight : approx. 85 kg Year : 2015 Power : 750 W Connection : 400 V / 3 ~ Lot is loaded for free
used
Two-way hydraulic bending machine, with CNC numerical control, with two bending jaws and deflection compensation (bombing). Upper instruments segmented. Year of manufacture 11/2008. These are two separate devices: a) material loading, b) double-sided bending machine with a table for feeding material incl. its rotation options. The machine was put into operation in 2009 and was only used for about half a year. It is possible to buy the bending machine itself, or just with the serving table. Bending capacities: material width: 2,500 mm thickness: max. 8 mm (material up to 400 N/mm2) edges with minimum height = up to 6 times the strength of the board minimum radius = up to 1.5 times the strength of the board.
used
Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor -Manufacturer: Euromate mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg
used
Turning diameter: 1400 mm Turning length: 2650 mm Spindle bore: 0 mm Motor power: 0 HP/kW Make MFD HOESCH Type DHR II 130 K S Year 1965 wheel lathe Radsatz drehmaschinen mfd hoesch Centre height (mm) Gauge = 1435 Center distance (mm) Chuck = 1400 Spindle bore L = 2,650 Under power !Profiling turning Double support Used Wheel lathe mfd hoesch ( hegenscheidt) for sale. Gebrauchte radsatz drehmaschine von mfd hoesch ( hegenscheidt ) zum verkauf
Qty. 1 Second-hand roll lathe Mfc.: Herkules Type: WD-700 Built: 1952 General overhauled by Hoesch-MFD in 1990 Centre height: 600 mm Turning length: 2750 mm 2-axis digital display – Mfc.: Micro Wizard Longitudinal drive Standstill torque: 14 Nm Rated revolution: 2500 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min. Plain drive Standstill torque: 14 Nm Rated revolution: 3000 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min.
used
Capacity: 250 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm Make : MFD HOESCH - Germany Typ : PR 250 / 1000 Age : 1992 Height of centre : 500 wheel Ø : 1.000 mm pressing force : 250 ton cylinder stroke : 500 mm Cylinder Ø : 300 mm Cylinder piston Ø : 270 mm working force: 360 bar Pressing speed : 0 - 80 mm/min Pinole feed : 0 – 1300 mm/min Return speed : 0 – 1300 mm/min Centring device Centre angle : 90° Pinole diam. Ø : 100 mm Cylinder diam. Ø : 110 mm Pinole stroke : 500 mm Recently retrofitted Kuenstler Bahntechnik New PC for making marking & measuring protocolcalibration system Big package with differen ...
used
turning diameter over bed: 2235 mm turning diameter over slide rest: 2997 mm turning length: 12200 mm Control: SIEMENS faceplate diameter: 2000 mm total power requirement: 300 hp weight of the machine ca.: / t required space: / m HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Faceplate 2006mm. Centre Height 1,499mm Swing Over Saddle 2235mm. Swing Over Bed 2997mm. Turning Length 12192mm. Min/Max Workpiece Held In Chuck Ø457/1600mm. Maximum Workpiece Weight110 Ton. Speed Range 0.5- 140rpm (300hp Motor). Feed Range 0.0118-7.08/Rev. Steady Capacity Ø356-902mm. Copying Depth 508mm lnductive. Maximum Cutting Force 30,000Nm. Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working
used
Key data: 1435
Turning diameter: 1435 mm Turning length: 0 mm Spindle bore: 0 mm Motor power: 0 HP/kW Fields of application machining of two wheel sets at the same time turning of wheel tyre profiles on wheel sets in situ machining of brake discs on wheel sets in situ machining of single wheel sets machining of coupled wheel sets machining of wheel sets of different gauges on all mainline railway, metro and tram vehicles Rail track gauge: 1.435mm Max. wheel tread Ø:1.400mm Min. wheel tread Ø:500mm Number of slides: 2 + 2 Power: 2 x 30 kW Length: 7.000 mm Width: 8.000 mm Height: 2.600 mm Weight: 32.000 kg The tandem a ...
used
Key data: 1400 Siemens, 2450 840 D
Turning diameter: 1400 mm Turning length: 2450 mm Turret positions: 0 CNC Brand: Siemens CNC Model: 840 D Output 1 wheel set 1 hour Rail track gauge: 1435 + 1000 mm Max. wheel tread Ø: 1.400mm Min. wheel tread Ø: 500mm Max. axle length wheel set:2.450mm Speeds / ranges: 133Rpm Number of slides: 2 Power: 2 x 30 kW Length: 8.900 mm Width: 8.000 mm Height: 3.500 mm Weight: &nbs ...
used
Chamber filter plates PP Polypropylene chamber filter plate -for almost all manufacturers: Rittershaus & Blecher, Passavant, Netzsch, Hoesch, von Roll, Diemme, Filox, Andritz, etc. Cake thicknesses and plate thicknesses are freely selectable depending on the application and filtration conditions. The chamber filter plate made of plastic is characterized by excellent chemical resistance and easy handling due to its low dead weight. - One component - The filter surface consists of a special conical bump structure. This pimpled structure supports the filter cloth and ensures excellent filtration performance for each individual chamber. - Filtratin inputs and filtrate sequences individually according to customer requirements - High plan parallelism, thus flawless sealing in the closed state. Standard formats: 250, 400, 470, 500, 630, 800, 915, 1000, 1067, 1200, 1300, ...
used
Capacity: 250 t Table length: 2500 mm Table width: 1000 mm Stroke: 1000 mm CNC Brand: Siemens CNC Model: Siemens TOUCH Railway presses Hegenscheidt MFD - PR 250 / 1000 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Centre height: 550mm Max. wheel tread Ø: 1100mm Max. wheelset length:2500mm Max. pressing force:250T Max. cylinder stroke:500mm Cylinder Ø: 300 Working speed: 10 - 80mm/min. Pinole feed: 1300mm/min. Return speed: 1300mm/min. Length: 6100mm Width: 5730mm Height: 3750mm Weight:&nbs ...
used
DIEDESHEIM vertical lathe Vertifront 120-12 CNC. Electrics and geometry overhauled in 2007 for approx. 290.000,00 €! Former machine of the company Hoesch Rothe Erde Lippstadt, permanently maintained and maintained. Equipped with two turret supports (5-fold), protective hoods against emulsion vapors, housing see pictures, CE compliant. Details: Type 120-12 CNC Machine number L738 Year of construction 1983 Refurbished 2007 Space requirement approx. 20 sqm Weight approx. 20 to Power consumption approx. 110 kW Headstock Main spindle bearingsØ axial 500 mm radial 240 mm Cross Slide Unit Vertical slide stroke 800 mm (Z-axis) Paddling slide stroke 1,000 mm (X-axis) Basic hydraulics complete, system RING 2x2 axis CNC path control SIEMENS Sinumerik 3 TT Optional accessory 6-fold face plate clamping ideal for thin-walled workpieces ...
used
Bausch complete vial line including labelling and inspection in „as-new condition comprising: Bausch type 721 De-bagging machine for vial tubs size 221 x 379 x 49.5 mm, with oRABS Bausch type 411 enclosed sterile transfer chamber to decontaminate outer surfaces using 4 UV light lamps Bausch type 721 De-lidding and de-nesting of the vial tubs under isolator Bausch type 534 filling and closing machine for stoppers/rubber bungs, operates under class A conditions into an isolator for toxic products, rotary infeed table, pre- and post-weighing for the In-Process Control (IPC) of a 100% weight verification of each vial, pre-gassing with nitrogen, dosing using 4 peristaltic pumps with a filling accuracy of up to +/-1% Bausch type 551 closing machine for aluminium crimp caps and flip-off with rotary infeed table, under isolator Bausch type 309 cleaning machine for external washing, rinsi ...
used
Wire electrode, welding wire 1x FEMI FM3 EN 440 G4 Si 1 Diameter: Ø 1,2 mm, quantity: approx. 15.0 kg 1x HOESCH WEKO 1 EN 422 M G2Si1 diameter: Ø 1.0 mm, quantity: approx. 15.0 kg reel: Ø 300 mm New ! Dimensions ( single ): 300 x 300 x 100 mm Dimensions ( packaging ): 310 x 310 x 210 mm
used
Description: Workbench with: - 40 mm MFD wooden board - 4 pcs. Adjustable feet Length 1524 mm Width 650 mm Height above floor 885 mm Table load max. 1000 kg Approx. Onsite Dimension. (l x w x h): 1,530 x 650 x 880 mm, weight approx.: 62 kg