high grade used for sale

High-voltage motor, electric motor, three-phase asynchronous motor with squirrel-cage rotor -Power: 630 kW -Voltage: 10500 V -Speed: 1493 rpm -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 54 -Documentation: everything available -Quantity: 1 piece available -Dimensions: 2440/1885/H1500 mm -Weight: 5000 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Handover: in current condition as viewed -Condition: without grinding spindle -Grinding spindle for: Lathe -electric: operated -Motor: VEM 0.75 kW -Bracket: Ø 80 mm -Dimensions: see photos -Total dimensions: 600/370/H350 mm -Weight: 60 kg

High-pressure standpipe -Pressure: maximum 30 bar -Predos is a special high-pressure stainless steel standpipe with a burst pressure of 70 bar. -Pressures of up to 30 bar may be required when clearing blocked drains. -High-pressure gauge -with lid lifter type: Hercules -in the suitcase -Dimensions: 1200/360/H200 mm -Weight: 16 kg

bore capacity in steel (diameter): 32 mm arm length: 1230 mm table surface area: 1200 x 500 mm bore stroke: 180 mm feed - independent: 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds: 60 - 1800 U/min taper MK: 4 total power requirement: 2,7 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A used cutting machine Polar 78XT Touch screen Side Tables Chrome-plated table Air table

Key data: 1200 mm, 1050 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center This 2013 Röders RXU 1200 is a top-tier 3-axis high-speed machining center engineered for maximum rigidity and flawless surface quality in complex milling operations. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1200 Machine number: 13761-12 Year of manufacture: 2012 2. Operational parameters Travel (X / Y / Z): 1200 mm / 1000 mm / 500 mm Clearance height: 600 mm Machining feed rate: 0 - 60,000 mm/min Table size: 1300 x 1100 mm Max. workpiece weight: 3000 kg Axis drives: Linear motors in all axes Spindle: GMN HCS170; 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 56 positions Max. tool diameter: 35 mm (HSK-F63) Operating hours: approx. 16,951 h Spindle ...

Offer 26119 Technical data: - Drilling performance in steel ST 60 30 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 125 mm - Drilling spindle speeds infinitely variable 80 - 3200 rpm - Tapping option by reverse / counterclockwise rotation up to M 20 - Projection 260 mm - Max. distance table - drilling spindle 825 mm - Table with 2 T-slots 500 x 360 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.8 / 1.5 kW - Space requirement approx. W 500 x H 1900 x D 950 mm - Weight approx. 230 kg - Cross table with handwheels

Key data: 1200 mm, 1000 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center Engineered for optimal accuracy and continuous precision, this 2012 Röders RXU 1200 provides exceptional 3-axis CNC performance for advanced manufacturing and toolmaking. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1200 Machine number: 13761-12 Year of manufacture: 2012 2. Operational parameters Travel (X / Y / Z): 1200 mm / 1000 mm / 500 mm Clearance height: 600 mm Machining feed rate: 0 - 60,000 mm/min Table size: 1300 x 1100 mm Max. workpiece weight: 3000 kg Axis drives: Linear motors in all axes Spindle: GMN HCS170; 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 56 positions Max. tool diameter: 35 mm (HSK-F63) Operating hours: approx. 16,951 h Spi ...

Key data: 1000 mm, 810 mm, 500 mm

Röders 3-Axis High-Speed Machining Center High-Dynamics Vertical Machining Center Featuring state-of-the-art drive technology, this 2018 Röders RXU 1001 delivers high dynamic performance and exceptional precision for demanding 3-axis machining applications. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RXU 1001 Machine number: 15355-14 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 1000 mm / 810 mm / 500 mm Clearance height: 700 mm Machining feed rate: 0 - 60,000 mm/min Table size: 996 x 796 mm Max. workpiece weight: 2000 kg Axis drives: Linear motors in all axes Spindle: 40.4 kW; 100 - 30,000 rpm Tool holder: HSK-F63 Tool magazine: 40 positions Max. tool diameter: 30 mm Operating hours: approx. 56,106 h Spindle hours: approx. 27 ...

Key data: 500 mm, 400 mm, 240 mm

Röders 3-Axis High-Speed Machining Center Compact 3-Axis High-Speed Milling Machine This 2006 Röders RXP 500 is a dedicated 3-axis high-speed machining center, highly regarded in the industry for micro-machining and delivering impeccable surface finishes. Technical Details ‍ 1. Machine identification data Name: CNC High-Speed Milling Machine Manufacturer: Röders Model: RXP 500 Machine number: 11714-65 Year of manufacture: 2006 2. Operational parameters Travel (X / Y / Z): 500 / 400 / 240 mm Table size: 550 x 450 mm (T-slots: 14 mm, spacing 63 mm) Max. workpiece weight: 400 kg Axis drives: Linear motors in all axes Feed rate: 0 – 40,000 mm/min Spindle: 14 kW; 42,000 rpm Tool holder: HSK E40 Tool magazine: 21 positions (optional up to 42 positions) Max. tool diameter: 16 mm Connections (Electrical): 400 V 3-phase (390V - 410V) ...

Key data: 600 mm, 450 mm, 300 mm

Röders 3-Axis High-Speed Machining Center 3-Axis High-Speed CNC Machining Center A proven performer in industrial milling, this 1999 Röders RFM 600/2 delivers reliable 3-axis high-speed cutting designed for precision tooling and mold making. Technical Details ‍ ‍ 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RFM 600/2 Year of manufacture: 1999 Machine number: 88194-80 2. Operational parameters Travel (X / Y / Z): 600 / 450 / 300 mm Table size: 700 x 550 mm Max. table load: 800 kg Spindle speed: 42,000 rpm Spindle motor power: 14 kW Feed rate: 0 – 30,000 mm/min Rapid traverse: 30 m/min Tool changer: 18-position Operating hours: approx. 108,888 h Spindle hours: approx. 18,625 h Control: Röders RMS6 Connections (Electrical): 400 V; 20 kVA 3. Weights Total machine weight: approx. 52 ...

GeneralTraveling column machine DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal1800 mmCross700 mmVertical700 mmTool changerType of magazineChain Number of tools30 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,75 x 3,45 x 2,75 mWeight approx.14320 KgMiscellaneousClamping SystemDIN 69872 NC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel range: +/- 90° Swivel speed: 40 rpmFixed tableFixed TableTable ...

T65 Digital Ultra Turrax Currency: MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

CONTROLS   conventional PRESS FORCES   total force (nominal): 75 to PRESS TABLE   table surface (left-right): 1250 mm   table surface (front-back): 1110 mm SLIDE   table surface (left-right): 960 mm   table surface (front-back): 750 mm SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 10 mm   stroke max.: 50 mm   stroke rate (min.): 120 /min   stroke rate (max.): 600 /min STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 300 mm ELECTRICAL SPECIFICATIONS   total power consumption: 15.5 kW DIMENSIONS / WEIGHTS   total weight approx.: 13500 kg ATTACHMENTS (PRESSES)   strip feeder: yes   feeder type: roll feeder

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Polar 78 XT Touch screen Spare blade

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

Polar 115 ED AT Autotrim Optionally available Jogger RA-4 Year 2007 Lift LW 1000-4 Year 1999 Transomat TR 130-EL-4 Year 2001

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Table clamping surface: 600 x 1800 mm Height adjustment of the boom: 450 mm small/large drilling radius: 305/1305 mm Spindle holder: SK 40 Quill stroke: 200 mm Spindle speeds infinitely variable: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency-controlled: 5.5 kW electr. Connection: 400 V, 14 kVA Weight: 3400 kg Space requirement: 3800 x 2000 x 2500 mm

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm c-axis: 360 ° b-axis: +10 / -110 ° control: Heidenhain iTNC 530 : : 42000 min/-1 : 20 / 15 kW table surface area: dia 750 mm max. table load: 800 kg : : 30 pos. tool taper: HSK E 50 feeds:: feed speeds: max. 90.000 mm/min rapid traverse: 90 m/min total power requirement: 73 kVA weight of the machine ca.: 11 t dimensions of the machine ca.: 3,3 x 2,9 x 3,1 m High dynamic 5-Axis-Precision Center equipped with: - CNC ControlHeidenhein iTNC 530 - ATC 30-fold (HSK E50) - Chip Conveyor approx 57000H working hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Brinkmann, pressure booster pump type FH 45-54-05 -Drive: 3.3 kW -Speed: 2900 rpm -Max. flow rate: 30 l/min -Max. delivery head: 168 m -Dimensions: 285/220/H1010 mm -Weight: 46 kg

There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible.

Maximum Spindle Speed 2800 RPM Brand Weiler Power Source Electric Control Type Conventional Machine Weight (kg) 800 Chamfer Triple Model/Type VS1 Year of Manufacture 1979

Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .

Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 kN (20 T). Speed range: 100 – 1800 spm. Year of manufacture: 1996. Hours under power: 51574. Feed BBV 101/75 on the left-hand side. Max. strip width: 125 mm. Max. feed pitch: 85 mm. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm. Ram height adjustment: 51 mm. Dimensions of the clamping plate: 510 x 400 mm. Bed opening: 400 x 160 mm. Max. distance of the mold width between the columns: 410 mm. Max. strip passage width: 260 mm. Connected load: 51 kVA. Power 400 V 50 Hz. Control voltage: 24 V. Machine dimensions: H 2540 x W 1661 x D 855 mm. Machine weight: approx. 3100 kg. Control cabinet and control system. Including all original technical documentation. Machine is now under power. Sound cabin sold separately, not included in machine price.

FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Specifications Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Feeder BBV 300 – fully synchronized mechanical strip feeder system ...

This high-speed precision stamping press, manufactured in 1987, delivers a maximum pressing force of 80 tons (800 kN) and is designed for demanding progressive-tool applications. With an operating range of 100–1000 strokes per minute, it combines high productivity with exceptional process stability. The machine features adjustable stroke lengths from 16 to 63 mm, a ram adjustment of 76 mm, and supports tools up to 970 mm width. A Bruderer BBV 202/120 strip feeder is included, allowing strip widths up to 202 mm and feed pitches up to 120 mm, ensuring precise material handling. The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners. Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 – 1000 SPM Main voltage: 40 ...

Pallet racking, as good as new 108 pitches - Multiple sites. Manufacturer: Jungheinrich Type: B Technical data: 10 stand frames, approx. 4,250 x 1,100 mm 36 supports, approx. 3,600 x K125 mm 72 locking pins The shelf load is 1,600 kg (with an evenly distributed load). 2.773,11 € net plus 19 % VAT from stock 21698 Harsefeld. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.

High-speed mixers Manufacturer: Henschel Type FM-4 Serial No. 80 5002 Double jacket for heating and cooling Total capacity 4 liters Working capacity 3 liters

Offer 26144 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity up to 45 mm - Tapping device up to M 36 - Feeds infinitely adjustable - Drilling spindle holder MK 4 - Drilling spindle stroke programmable up to 175 mm - Drilling spindle speeds infinitely variable 30 - 2400 rpm - Projection 300 mm - Table with 2 T-slots 600 x 500 mm - Height adjustable via rack with hand crank - min. - max. distance table - drilling spindle 70 - 830 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 600 x H 1980 x D 950 mm - Weight approx. 500 kg

Description WE OFFER AN HIGH TECH CNC LATHE TURNING AND MILLING CENTRE MACHINE IS COMMING OUT FROM FORMULA 1 - MERCEDES WORKSHOP MACHINE WAS FROM NEW HIGEST POSSIBLLE MAINTAINED WITH OFFICAL MORI SEIKI TECHNICAL DATA: Mori Seiki MT2000 CNC Lathe Description: Swing over bed - 700mm, Distance between centres - 1080mm, Max turning dia meter - 550mm, Max turning length - 1020mm, Bar capacity - 65mm, X Travel - 565mm, Y Travel - +/-80mm, Z Travel - 1077mm, B Indexing - +/-120deg, X Travel Turret 2 - 155mm, Z Travel Turret 2 - 1067mm, Spindle Speed - 4500rpm, Spindle nose - JIS A2-6, Tool Spindle Speed - 6000rpm, Tool Spindle type - Capto C6, ATC - 40 Tools, Max tool length - 280mm, Max tool weight - 7kg, Turret 2 Tools - 12, Square shank - 25mm, Boring bar shank diameter - 40mm, ...

Offer 25491 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Digital speed display - Projection 300 mm - Turning table with vice 440 x 440 mm - Column diameter 145 mm - Feeds-Electromagnetic 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Drilling spindle speeds infinitely adjustable with digital display - 200 - 3200 rpm - Drive 400 V / 1.8 / 2.9 kW - Lighting - E. footswitch - Space requirement approx. W 650 x H 1900 x D 800 mm - Weight approx. 470 kg

Emco Maximat V10-P Lathe. 3-speed 380V, 2-stage motor runs smoothly! Forward and reverse rotation. Geared spindle drive, gears run in oil. 8 spindle speeds adjustable from 60 to 2500 RPM. Automatic feed in longitudinal and cross directions. Norton gearbox for easy thread cutting. Metric. MT2 tailstock taper. Emco quick-change tool post with 7 holders. Made in Austria! Includes accessories as shown in the last two pictures at the front of the machine. The machine is in very good condition! Center distance: 650 mm Center height: 125 mm Spindle bore: 22 mm Overall dimensions: 125 x 55 x 40 cm

Klopp 1000 Quick Planer Total width: 150 cm Overall length: 3,330 cm Total height: 170 cm Planing width: 750 mm Working length: 1000 mm Table width: 900 mm

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg

This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Speed: 60 - 320 SPM Adjustable stroke 8–80 ...

HAMMELMANN HDP 124 Twin Unit Integration of 2 x Hammelmann HDP 124 high-pressure pumps Technical data: Manufacturer: Hammelmann GmbH, Germany Type: Twin Unit with 2 x HDP 124 Year of Make: 2013 Machine numbers: B3.01124.xxxx and B3.01124.xxxx Working pressure: 2 x 2,500 bar Max. flow rate: 2 x 24 l/min Piston Diameter: P17.5 Engines: 2 x DEUTZ TCD 2012 L06 2V, Stage 3 Engine power: 2 x 129 kW at 2,150 rpm Diesel consumption: approx. 45–70 l/h Tank capacity: approx. 900 litres Noise emission: LWA = 110 dB Water connection: Express coupling Minimum water pressure: approx. 3 bar Required water volume: approx. 2 m³/h Dimensions: approx. 11.05 m x 2.60 m x 4.50 m Weight: approx. 11,750 kg Built on: DAF 75.250 4x2 truck, 250 hp, 19 t box body Aquajet 12 – n°01 – year 2013 2450bar – 24l/min Engine Deutz 5 919h Pump 3 723h Aquajet 12 – n°02 – yea ...

taper MK: 3 feed:: 4 Stufen : 2580 x-travel: 2500 mm throat: 1000 mm : 1000/2800 mm weight: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Water jet high-pressure pump, high-pressure pump for water jet cutting, water jet cutting, water jet cutting system -Manufacturer: Deter Fluidtechnik, high-pressure pump for waterjet cutting with water tank and feed pump -High-pressure pump: Type PP1205/110V -Centrifugal pump: Calpeda NM 1/AE -Container: Stainless steel -Individual components: see photos -Dimensions: 1580/410/H600 mm -Weight: 118 kg

Polar 92 E Year of Make: 2000 E version, air table, 2x side tables Formica large, Spare blade. Immediately available!

Polar 66 E Year of Make: 2007 E Version Spare blade Very good condition - little used! Immediately available

Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Lowara, Multi-stage vertical centrifugal pump -Type: 5SV07F022T -Motor: 2.2 kW / 2860 rpm -Protection class: IP55 -Flow rate: max. 8.5 m³/h -Number: 2x pumps available -Price: per piece -Dimensions: 250/210/H685 mm -Weight: 30.2 kg

taper MK: 3 serial number: 4131 throat: 1000 mm documentation: ja clamping: hydraulisch kW weight of the machine ca.: 2,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Bruderer BSTA 80H is an 80-ton high-speed stamping press built for heavy-duty progressive-die production, fitted with a BBV 320/200 strip feeder and Unidor tool monitoring. In stock in Pforzheim, ready for inspection. Nominal force: 800 kN (80 tons) Tool monitoring: Unidor Stroke rate: 100–1,000 spm Strip feeder: Bruderer BBV 320/200 Adjustable stroke: 16–63 mm Clamping plate area: 970 mm Main drive: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip inlet height (adjustable): 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: approx. 15,550 kg Operating hours (main drive): approx. 28,067 h More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

For sale: Hammelmann HDP 72 High Pressure Pump ✅ Year of manufacture: 2016 ✅ Operating pressure: 440 bar ✅ Flow rate: 81 l/min ✅ Piston diameter: 35 mm ✅ Speed: 1,500 rpm ✅ Never used – in excellent condition Location: Oerlinghausen, Germany Please contact me for more information

The BSTA 50UL is a Bruderer high-speed precision stamping press rated at 500 kN (50 tons) nominal force, engineered for continuous progressive-die production at variable stroke rates from 100 to 1,120 strokes per minute. The press is equipped with a Bruderer BBV 202/120 strip feeder, delivering strip widths up to 203 mm and handling material thicknesses up to 2 mm. Adjustable stroke is set between 16 and 51 mm, with strip inlet height adjustable across a 50–140 mm range to accommodate varying tooling and material profiles. Nominal force: 500 kN (50 tons) Tool monitoring: Unidor Stroke rate: 100–1120 strokes per minute (variable) Strip feeder: Bruderer BBV 202/120 Adjustable stroke: 16–51 mm Mounting space / clamping plate: 760–940 mm Main drive: 22 kW Power supply: 400 V / 50 Hz Table area: 940 x 580 mm Strip inlet height (adjustable): 50–140 mm Max. strip width: 2 ...