hfo engine used for sale

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Drop Roller for Hard Candy with electr. Engine roller size. : approx 58mm x 177 mm table size : approx. 750mm x 620mm x 750mm (lxwxh) Packing dimensions : approx. 30” x 30” x 25” (wooden box suitable for export) Net Weight : approx. 200 kg. Gross weight : approx. 250 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Machine with working table, electrical engine and gear box. Also available, machine hand driven, without electrical engine We offer this machine in as-is where it is condition delivery time: appr. 8-12 Weeks after payment in our warehouse

FOR SALE 2 SETS MTU 12V 331 PROPOLSUION ENGINES 1180W AT TURKEY TO WHOM IT MAY CONCERN; WE VE 2 SETS MTU MTU 12V 331 PROPOLSUION ENGINES 1180W AT OUR STOCK ENGINES HAS ZF GEAR BOXES ENGINES READY TO TRANSPORT PLS FIND ENGINE DETAILS ON BELOW. RUNNING HRS 7330 / 7320 hrs 12V TYPE 331 POWER 1180KW ENGINE NO. 5531091 / 5531092 YOB 1999 RPM 2340RPM GEAR BOXES MAKER ZF MODEL BW 255 RATIO 2,46A TRANSMITION NO. 499 CAP 28 WE SOLD SOME MINOR PARTS PARTS FROM ENGINES. IF YOU INTEREST WE CAN DISMANTLE PARTS AND OFFER IT. ENGINES ARE TURNING WITH GOOD SUCTION ENGINES READY TO TRANSPORT... IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US... Capt. Ayhan Ugurluba Regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

General of overhault engine immediately available from stock Contact= MIW GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0)4281-950583 Fax : 0049(0)4281-950585 info@miw-zeven.de abc.miw-zeven.de

4 Cyl. Ford industrial engine, alternator, tractor Ford 5000, pass.f. New Holland Mähdr. 8030

Carbon fiber shaft for ALV brake 440kW of 1000Nm.Spezialwelle with Flaschstücken. 980 wave length D = 125 flange outer 150.Ohne adatper (photo-packed).Info 0170/2204056Mail fa.raupp@t-online

Kubota V 1702, 4-Cyl. Diesel engine, water-cooled, 1732 cm3 displacement, 25.5kw/35 hp/2800 1/min. used machine, approx. 4,600 h, water pump new, incl. starter and alternator. Diesel engines 1-6 Cyl., various brands: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Power of 4.5 - 100 kw, used, partly as new. Petrol engines: 1-2 cylinders of 3-15 kw from B&S, Honda, Kohler, Robin, Wisconsin. Various coolers, starters, alternators and silencers in stock, various hydraulic pumps and hydraulic motors. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

E - engine of Exhaustor 3 x 380 volts.

The Jabsco 15780-0000 is a Cummins bronze Flexible Impeller engine cooling pump with a Flanged Ports, bare shafted pump only. This is a Marine diesel engine cooling pump for Cummins engine models K38 / K50 / KTA38 / KTA50. It is the same pump as Cummins engine part 3393018 / 4314820 / 4314522. Features : Pump Body:Bronze Port Size:Ports are Flanged Product Specs : Flow up to 400 GPM. Constructed from marine quality bronze and stainless steel. Easy to service and maintain. Excellent self-priming even from dry start-up. Unaffected by small solid contaminants. Engineered to high standards. High-grade design delivers extended lifespan.

REINTJES WAF 740 3.55:1

KTA 19 M3 600 HP / 1800 RPM sn 37169226

SN 238974 150 HP - 1500 RPM

For a gas engine K27 turbocharger ATL-No. IK510743400005 Ausführungsnr. 53279886791

SN 196883 165 HP- 1500 RPM

SCANIA DS 1441 A 21T SN 5516125

IVECO-FIAT 821 M

Flender engine, water cooled, with pump 3 ~ engine: ANWA-250ME-04 K No.: 3189850, IN the 2302, 1996 400 V VDE 96A 73.7 HP/55kW, cos. P. 0.87 50 Hz, 1475/min, th CI F, IP 54 DIN VDE 0530/91 DIN IEC 38/87, 0.530 t Cooling water consumption 15 l / min.

Frame Engine I With L-ringen

Motor 0 hours of operation (storage engine)

SUB: FOR SALE...1 STORK WERKSPOOR R156 HAVE A GDY SIR,. WE'VE 1 PCS STORK WERKSPOOR COMPLETE ENGINE FOR SALE. TYPE. R156 MOTOR NO. 20766 P.K. 205 RPM 1200 YOB. 1975 IF YOU INTEREST PLS DO NOT HESITATE TO CONTACT WITH US.. EX STOCK .ENGINES READY TO TRANSPORT. Capt. Ayhan Ugurlubay With kind of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Tip height: 107 mm top width: 350 mm circular diameter: bed 200 mm spindle bore: 25 mm taper tailstock: 2 MK spindle speed: 35 - 3500 rpm feeds: longitudinal and mm/U thread pitches plan: 0.2-3 mm electrical connection: 380 V, approx. 2.2 kW space: 600 x 1300 x 1230 mm weight: 850 kg

Diesel engine industry interest as a complete gene set very good condition over BRA on rapeseed oil 6900 with Leroy Somer generator for sale. If intrested the genset as a complete CHP incl. heat exchangers can be ordered all components year 2009 CHP manufacturer was the company Würz energy GmbH

MARINE DIESEL ENGINE Reference number 20131 Brand MITSUBISHI Model S12A(N) - MPTK Power 910 HP RPM 1550 RPM Serial number 11245 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system 12-cylinder, 4-cycle, water cooled diesel engine, with direct-injection, turbocharger, air-cooler, built-up heat exchanger and sea water pump Starter Electrical Start (24V) Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Expansion tank YES Heat exchanger YES DIMENSIONS LxWxH (cm) 2439mm1482mm1596mm Weight (kg) Net Weight 5000 kg

MAK M20 Spares for sale. 1.Reusable Cyl Heads Bare-Pressure Tested Free From Crack:8-10 2.Piston With Groove With in Limit:8-10 3.Con Rod-Free From Crack, Wear Within Limit:8-10 4.Fuel Pump-Good Condition:8-10 5.Reusable Liners Wear Below 0.20mm-Free From Crack, Welding or any Damages:8-10 6.L O Filter-Good Condition:2 7.Water Pump-Good Condition:1 8.Lube oil Pump-Good Condition:1 9.Turbo Charger K54-Good Condition:2 10.STD Condition 6M20 Crankshaft, Within Std Limits, no Crack, no Ovality , Hardness Within Limits:1 11.Cam Shaft 6M20-Good Condition:2 12.Woodward UG-8 - Good Condition:2 13.6M20 Engine Block-Good Condition:1 14.Cam Shaft Gear & Crankshaft Gear-Good Condition:2 15.FLY Wheel-Good Condition 6M20:1 16.After Cooler-Good Condition 6M20:1

Wartsila VASA V32 spare parts and complete engine also. 1.Reusable Liners wear below 0.30mm – free from crack, welding or any damages:8-10 2.Reusable Cyl heads bare – pressure tested free from crack:8-10 3.Piston with groove with in limit:8-10 4.Con rod – free from crack, wear within limit:8-10 5.Fuel pump - good condition:8-10 6.Centrifugal filter-good condition:1 7.Water pump – good condition:1 8.Lube oil pump - good condition:1 9.Turbo charger 354-11- good condition:2 10.Cam shaft – 12v32 A BANK & B BANK-good condition:2 11.WOODWARD 723 card - good condition:2 12.12v32 engine block - good condition:1 13.CAM SHAFT gear & CRANKSHAFT GEAR- good condition:2 14.FLY WHEEL- good condition 12V32:1 15.AFTER COOLER - good condition 12V32:1 If you are interested in complete engine part, please inform accordingly. For your information in past, we have supplied Engine  ...

We offer from stock Zeven-Germany: Refurbished replacement engine Lombardini LDW1404,full version. Engine is without intake manifolds, starters, Lima, oil pan. 12 months warranty MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Phone: 0049 (0) 4281-950583 Fax : 0049 (0) 4281-950585 E-Mail: info@miw-zeven.de abc..miw-zeven.de

OM 442 LA Mercedes-Benz replacement motor 340 HP Water-cooled 6-cylinder series engine (diesel) Wirtgen-version Complete the repair Mercedes Benz engine OM 442 LA. The engine was repaired using original spare parts. To investigate the durability of the engine, the engine has undergone an engine test run. Through this process, the customer receives an acceptance Protocol. The warranty period is 12 months or 3,600 hours of operation. Complete engine includes: Engine with fuel injection system, water pump, oil and fuel filter, turbocharger and compressor. Old part of deposit: 12.750,00

OM 501 LA Mercedes-Benz replacement motor 250-315 kW Water-cooled 6-cylinder engine (diesel) High pressure fuel injection system Euro II Complete the repair Mercedes Benz engine OM 501 LA. The engine was repaired using original spare parts. To investigate the durability of the engine, the engine has undergone an engine test run. Through this process, the customer receives an acceptance Protocol. The warranty period is 12 months or 3,600 hours of operation. Old part of deposit: 6.800,00 Complete engine includes: Engine with fuel injection system, water pump, oil and fuel filter, turbocharger and compressor.

OM 502 LA Mercedes-Benz replacement motor 330-448 kW 440 HP Water-cooled 6-cylinder engine (diesel) High pressure fuel injection system Euro II Complete the repair Mercedes Benz engine OM 502 LA. The engine was repaired using original spare parts. To investigate the durability of the engine, the engine has undergone an engine test run. Through this process, the customer receives an acceptance Protocol. The warranty period is 12 months or 3,600 hours of operation. Old part of deposit: 7.500,00 Complete engine includes: Engine with fuel injection system, water pump, oil and fuel filter, turbocharger and compressor.

OM 906 LA Mercedes-Benz replacement motor 150-205 kW 250 HP water-cooled 6-cylinder series engine (diesel) with high pressure fuel injection system Complete the repair Mercedes Benz engine OM 906 LA. The engine was repaired using original spare parts. To investigate the durability of the engine, the engine has undergone an engine test run. Through this process, the customer receives an acceptance Protocol. The warranty period is 12 months or 3,600 hours of operation. Complete engine includes: Engine with fuel injection system, water pump, oil and fuel filter, turbocharger and compressor. Old part of deposit: 5.500,00

OM 926 LA Mercedes-Benz replacement motor 240 kW 320 HP Water-cooled 6-cylinder series engine (diesel) Euro 5 suitable for Mercedes Axor Complete the repair Mercedes Benz engine OM 926 LA. The engine was repaired using original spare parts. To investigate the durability of the engine, the engine has undergone an engine test run. Through this process, the customer receives an acceptance Protocol. The warranty period is 12 months or 3,600 hours of operation. Complete engine includes: Engine with fuel injection system, water pump, oil and fuel filter, turbocharger and compressor. Old part of deposit: 5.500,00

We sell a reconditioned Scania DC 16 43 A (industrial engine). Before overhaul, the engine had 6600 hours.

Hydraulic radial engine manufacturer Calzoni MR. 3000-F1N1N2S2NX 0401 / 46528, 656592 250 bar Used Husky injection moulding machine, type GL225RS60/50

Hydraulic radial engine Manufacturer Denison/Calzoni Type MR300D - F1N1N2S2NX 0401 / 46529, 742056 250 bar Used from Husky injection moulding machine type GL225 RS60/50

New injection pump 0402 066 725(=PES6P110A120RS3336-1) NET 2.950,-EURO 6 x new injectors 0432 191 342 (Cummins # 408931500) net / piece 215,-EURO Mail: info@miw-zeven

Injectors new 6 x 0432 191 342/408931500 NET / piece 215,-EURO Injection pump new 0402 066 725/PES6P110A120RS3336-1 NET 2.950,-EURO mail:info@miw-zeven

Scania DC 16 43A industrial engine, 7000 operating hours, used and functional.

Yanmar 6N18AL

; Mileage [km]: 6; Power [PS]: 220

Scania diesel engine for generator drive, DC13-073A; Variable continuous power (PRP) 326 kW at 1500 1/min. (New)! Retail price: 19.000,00

; Mileage [km]: 8; Power [PS]: 260

; Mileage [km]: 8; Power [PS]: 340

Sell completely dismantled as part of DEUTZ TCD2015 V8 MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Email: info@miw-zeven

; Mileage [km]: 8; Power [PS]: 340

MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...

; Power [PS]: 101; Engine: Deutz TCD3.6L4

; Power [PS]: 101; Engine: Deutz TCD3.6L4