hf spindle used for sale

Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle

Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer

Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...

Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm Spindle power: 0 kW CNC Brand: 0 CNC Model: 0 Technical data Throwing wheel diameter: 175 mm Table length: 300 mm Table width: 160 mm Table surface: Length: 305 mm Width: 175 mm Grinding length: 400 mm Grinding height over table: 245 mm Grinding spindle speeds: 2560 rpm Vertical adjustment rough: 165 mm Vertical adjustment fine: 12 mm Voltage 50 Hz 3x: 380 Volt Power: 1.50 kW Machine´s weight about: 200 kg Overall dimensions machine: Length: 700 mm Width: 500 mm Height: 1600 mm Various accessories: Magnetic plate: Length: 250 mm Width: 130 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1520 mm Table width: 300 mm Number of T-channels: 3 T-channel width: 14H7 mm Distance of the T-slots: 80 mm Clamping surface Length Grinding length: 1200 mm Grinding width: 400 mm Execution: hydraulic Max. distance from table to spindle-centreline: 500 mm Longitudinal travel (X-axis): 1280 mm Transversal travel (y axis): 350 mm Automatic cross-feed: stepless from: 0 m/min up to: 7 m/min Table speeds: stepless from: 0.3 m/min up to: 30 m/min Automatic vertical feed: from: 0.0001 mm up to: 0.0010 mm Diameter of grinding wheel: 400 mm Width of the grinding wheel: 80 mm Wheel int. diameter: 127 mm Grinding wheel speeds: from: 1480 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 7.5 kW Machine´s weight about: 3700 kg Overall dimensions mach ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: FANUC Series 21i-MB Technical data Table length: 3200 mm Table width: 1500 mm Longitudinal travel (X-axis): 3300 mm cross travel (Z-axis): 1680 mm Max. distance from table to spindle centreline: 1155 mm Table load max.: 6000 kg Passage between the columns: 2000 mm Grinding wheel: Diameter: 500 mm Width: 120 mm Bore: 203.2 mm Noise level: 70 dB (A) Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 32 kW Total power required: 66 kW Machine´s weight about: 32400 kg Overall dimensions machine: Length: 11030 mm Width: 6075 mm Height: 4450 mm Various accessories: Coolant system Paper filter facility Oil mist extractor Magnetic plate: Length: 3200 mm Width: 1500 mm Lamp Handwheel electroinic Status light

Key data: 700

Grinding length: 700 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 400 mm Technical data Table length: 750 mm Table width: 240 mm Grinding length: 700 mm Grinding width: 300 mm Execution: hydraulic Max. distance from table to spindle-centreline: 600 mm Transversal travel (y axis): 270 mm Automatic cross-feed: stepless from: 0.200 m/min up to: 7.00 m/min Table speeds: stepless from: 3.00 m/min up to: 30.0 m/min Automatic vertical feed: from: 0.0010 mm up to: 0.012 mm Vertical rapid traverse: 0.30 m/min Diameter of grinding wheel: 400 mm Width of the grinding wheel: 500 mm Grinding wheel speeds: number (steps) up to: 2200 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 5.00 HP Total power required: 20.00 HP Machine´s weight about: 3000 kg Various accessories: Coolant system Magnetic plate: Length: 700 mm Width: 250 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: FANUC Technical data Table length: 800 mm Table width: 300 mm Number of T-channels: 1 T-channel width: 14 mm Axial motion: Longitudinal travel (X-axis): 710 mm cross travel (Z-axis): 300 mm vertical travel (Y-axis): 400 mm Max. distance from table to spindle centreline: 360 mm Table load max.: 250 kg Grinding wheel: Diameter: 355 mm Width: 31 mm Bore: 127 mm Grinding wheel speeds fix: 1710 rpm Table speeds: stepless from: 3 m/min up to: 25 m/min Automatic cross feed: stepless from: 25 mm/min up to: 500 mm/min Grinding spindle motor: 3.7 kW Machine´s weight about: 2600 kg Overall dimensions machine: Length: 2300 mm Width: 2000 mm Height: 2600 mm Various accessories: Touch screen Coolant system Paper filter facility Electrical magnetic chuck Length: 600 mm Width: 300  ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 450 mm Table width: 180 mm Execution: hydraulic Max. distance from table to spindle-centreline: 400 mm Longitudinal travel (X-axis): 550 mm Transversal travel (y axis): 200 mm Table speeds: stepless from: 0.10 m/min up to: 30.0 m/min Automatic vertical feed: Diameter of grinding wheel: 200 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3.00 HP Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 1800 mm Various accessories: Coolant system Electrical magnetic chuck Length: 450 mm Width: 200 mm Wheel truieng attachment hydraulic Dust extraction Digital readout number of axis:: ELESTA (1 x trans.) Set of flanges

Magnetic chuck diameter: 0 mm Grinding height: 0 mm Grinding wheel diameter: 0 mm Spindle power: 0 kW CNC Brand: 0 CNC Model: 0 Technical data Rotary table:diameter: 300 mm Grinding height over table: 245 mm Grinding height over Magnetic chuck: 150 mm Bell grinding wheel: Diameter: 175 mm Spindle speeds: from: 2560 rpm Voltage 50 Hz 3x: 380 Volt Total installed power: 1.5 kW Machine´s weight about: 200 kg Overall dimensions machine: Length: 750 mm Width: 600 mm Height: 1670 mm Various accessories: Wheel trueing attachment Macnetic chuck diameter: 300 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 160 mm Execution: hydraulic Max. distance from table to spindle-centreline: 330 mm Longitudinal travel (X-axis): 483 mm Transversal travel (y axis): 171 mm Table speeds: stepless from: 1.50 m/min up to: 18.0 m/min Automatic vertical feed: from: 0.0010 mm Diameter of grinding wheel: 178 mm Width of the grinding wheel: 13 mm Grinding wheel speeds: from: 2880 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2.00 HP Machine´s weight about: 850 kg Overall dimensions machine: Length: 1600 mm Width: 800 mm Height: 1700 mm Various accessories: Coolant system Magnetic plate: Length: 350 mm Width: 160 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 840 mm Table width: 250 mm Grinding length: 600 mm Grinding width: 320 mm hydraulic with automatic cycle to spindle-centreline: 500 mm Longitudinal travel (X-axis): 680 mm Transversal travel (y axis): 270 mm Automatic cross-feed: stepless from: 0 m/min up to: 3 m/min Table speeds: stepless from: 0 m/min up to: 30 m/min Diameter of grinding wheel: 300 mm Width of the grinding wheel: 50 mm Wheel int. diameter: 127 mm Grinding wheel speeds: stepless from: 665 rpm up to: 2388 rpm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 7.8 HP Machine´s weight about: 2600 kg Overall dimensions machine: Length: 1880 mm Width: 1430 mm Height: 2300 mm Various accessories: Coolant system Paper filter facility Electrical magnetic chuck Length: 600 mm Width:  ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 275 mm Table width: 110 mm Max. distance from table to spindle-centreline: 170 mm Grinding wheel speeds: up to: 2800 rpm Diameter of grinding wheel: 175 mm Width of the grinding wheel: 13 mm Drilling cap. of grind.wheel: 32 mm Grinding spindle motor: 0.7 HP Machine´s weight about: 560 kg Overall dimensions machine: Length: 1300 mm Width: 1000 mm Height: 1700 mm Various accessories: Magnetic plate: Length: 240 mm Width: 125 mm Dust extraction

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1500 mm Table width: 400 mm Grinding length: 1500 mm Grinding width: 500 mm Grinding height: 450 mm Execution: manual hydraulic Max. distance from table to spindle-centreline: 380 mm Longitudinal travel (X-axis): 1630 mm Transversal travel (y axis): 500 mm Automatic cross-feed: stepless from: 0.003 m/min up to: 0.05 m/min Table speeds: stepless from: 1 m/min up to: 35 m/min Automatic vertical feed: from: 0.002 mm up to: 0.04 mm Diameter of grinding wheel: 400 mm Width of the grinding wheel: 76 mm Wheel int. diameter: 127 mm Grinding wheel speeds: from: 1440 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 10 HP Total power required: 20 HP Machine´s weight about: 6500 kg Overall dimensions machine: Length: 6650 mm Width: 2200 mm Height:  ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 180 mm Grinding length: 500 mm Grinding width: 250 mm Execution: hydraulic Max. distance from table to spindle-centreline: 400 mm Longitudinal travel (X-axis): 500 mm Cross travel (z-axis): 250 mm Automatic cross-feed: stepless from: 0 m/min up to: 7 m/min Table speeds: stepless from: 2 m/min up to: 20 m/min Diameter of grinding wheel: 200 mm Width of the grinding wheel: 20 mm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2 HP Machine´s weight about: 1200 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1800 mm Various accessories: Coolant system Magnetic plate: Length: 600 mm Width: 200 mm Wheel trueing attachment

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 200 mm Grinding length: 500 mm Grinding width: 230 mm Max. distance from table to spindle-centreline: 420 mm Longitudinal travel (X-axis): 550 mm Transversal travel (y axis): 210 mm Table speeds: stepless from: 0.5 m/min up to: 24 m/min Automatic vertical feed: from: 0.0001 mm up to: 0.0050 mm Diameter of grinding wheel: 225 mm Width of the grinding wheel: 25 mm Wheel int. diameter: 50.8 mm Grinding wheel speeds: from: 2850 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2.2 / 3 kW Machine´s weight about: 1600 kg Overall dimensions machine: Length: 2100 mm Width: 1400 mm Height: 2160 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 200 mm Table load max.: 150 kg Execution: hydraulic Max. distance from table to spindle-centreline: 415 mm Longitudinal travel (X-axis): 420 mm Transversal travel (y axis): 192 mm Table speeds: stepless from: 2 m/min up to: 28 m/min Automatic vertical feed: Vertical rapid traverse: 0.18 m/min Diameter of grinding wheel: 225 mm Width of the grinding wheel: 25 mm Wheel int. diameter: 51 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 2.2 kW Total power required: 6.1 HP Machine´s weight about: 1050 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 2250 mm Dimensions electric cabinet: Length: 800 mm Width: 300 mm Height: 1450 mm Various accessories: Electrical mag ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS Technical data Table length: 600 mm Table width: 200 mm Longitudinal travel (X-axis): 600 mm Cross travel (z-axis): 280 mm vertical travel (Y-axis): 370 mm Max. distance from table to spindle centreline: 500 mm Table load max.: 150 kg Grinding wheel: Diameter: 300 mm Width: 32 mm Bore: 76.2 mm Grinding wheel speeds: from: 800 rpm up to: 4200 rpm Table speeds: stepless from: 1 m/min up to: 24 m/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 10 kW Total power required: 12 kVA Machine´s weight about: 2300 kg Overall dimensions machine: Length: 2270 mm Width: 1500 mm Height: 1850 mm Various accessories: Coolant system Paper filter facility Electrical magnetic chuck Length: 450 mm Width: 240 mm Wheel trueing attachment Wheel dresser on CNC table Set o ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 900 mm Table width: 300 mm Grinding length: 600 mm Grinding width: 350 mm Execution: hydraulic Max. distance from table to spindle-centreline: 550 mm Longitudinal travel (X-axis): 500 mm Transversal travel (y axis): 320 mm Automatic cross-feed: stepless up to: 1.2 m/min Table speeds: stepless from: 1 m/min up to: 25 m/min Automatic vertical feed: from: 0.002 mm up to: 0.060 mm Diameter of grinding wheel: 300 mm Width of the grinding wheel: 50 mm Wheel int. diameter: 76 mm Grinding wheel speeds: number (steps): 2 from: 1400 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3.7/4.5 kW Machine´s weight about: 2800 kg Overall dimensions machine: Length: 2800 mm Width: 1800 mm Height: 2250 mm

Magnetic chuck diameter: 0 mm Grinding height: 0 mm Grinding wheel diameter: 0 mm Spindle power: 0 kW CNC Brand: 0 CNC Model: 0 Technical data Rotary table:diameter: 300 mm Grinding height over Magnetic chuck: 95 mm Bell grinding wheel: Diameter: 175 mm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2.2 kW Total installed power: 2.7 kW Machine´s weight about: 540 kg Overall dimensions machine: Length: 1900 mm Width: 1700 mm Height: 1800 mm

Operating hours: 40570 Technical data Rotary table:diameter: 750 mm Max. grinding height: 200 / 235 mm Travel of the fine feed: 300 mm Grinding heads number: 1 Table speeds: stepless from: 7/35 rpm Table load max.: 1000 kg Grinding wheel: Diameter: 470 mm Segments: 8 Dimension of the segments:: 120 x 40 x 80 mm Bell grinding wheel: Spindle speeds:: 24 m/s Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 30 kW Machine´s weight about: 6100 kg Overall dimensions machine: Length: 2800 mm Width: 1300 mm Height: 2400 mm Various accessories: Measuring instrument MARPOSS: E 5

Technical data Table length: 840 mm Table width: 250 mm Grinding length: 600 mm Grinding width: 350 mm Execution: hydraulic Max. distance from table to spindle-centreline: 550 mm Longitudinal travel (X-axis): 620 mm Cross travel (z-axis): 320 mm Automatic cross-feed: stepless up to: 1.2 m/min Table speeds: stepless from: 1 m/min up to: 25 m/min Automatic vertical feed: from: 0.002 mm up to: 0.060 mm Diameter of grinding wheel: 300 mm Width of the grinding wheel: 50 mm Wheel int. diameter: 76 mm Grinding wheel speeds: number (steps): 2 from: 1400 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 5.2 HP Machine´s weight about: 2800 kg Overall dimensions machine: Length: 2800 mm Width: 1800 mm Height: 2200 mm Various accessories: Wheel trueing attachment Set of flanges: 2 x

Control: Fuji Electric MONITOUCH Technical data Table length: 600 mm Table width: 250 mm Axial motion: Longitudinal travel (X-axis): 600 mm Cross travel (z-axis): 280 mm Max. distance from table to spindle centreline: 500 mm Grinding length: 600 mm Table speeds: stepless from: 1 m/min up to: 24 m/min Creep feed: from: 0.03 m/min up to: 0.40 m/min Automatic cross feed: stepless from: 0.010 mm/min up to: 10000 mm/min Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 9.5 kW Total power required: 13 kVA Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2910 mm Width: 2320 mm Height: 1840 mm Various accessories: Coolant system High pression colant device Paper filter facility Electrical magnetic chuck Length: 500 mm Width: 200 mm Diaform profiling device: Rapport 5:2 Handwheel electroinic Automatic central lubrication

Control: HB CNC 100 Technical data Table length: 800 mm Table width: 450 mm Grinding length: 800 mm Grinding width: 400 mm Grinding height: 500 mm Max. distance from table to spindle-centreline: 150 / 700 mm Longitudinal travel (X-axis): 900 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 550 mm Automatic cross-feed: stepless from: 0.01 m/min up to: 4 m/min Table speeds: stepless from: 0.02 m/min up to: 25 m/min Automatic vertical feed: from: 1 mm/min up to: 2000 mm/min Diameter of grinding wheel: 400 mm Width of the grinding wheel: 80 mm Wheel int. diameter: 127 mm Grinding wheel speeds: from: 1650 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 23 kW Total power required: 45 kVA Machine´s weight about: 4800 kg Overall dimensions machine: Length: 3200 mm Width: 2400 mm Height: 2400 mm Various accessories: Coolant system Paper filter facility Electrical mag ...

Grinding length: 4000 mm Grinding width: 1100 mm Grinding height: 1000 mm Wheel diameter: 4000 mm Spindle power: 30 kW CNC Brand: Fagor CNC Model: 8055 MACH-id   411 MAKE       DANOBAT Spain TYPE         RP 4000 YEAR       1987 / 20.. SPECIFICATIONS Controll      Fagor 8055 Cylindical / Surface / Other     Surface Grinding length       4000 mm X - Travel         1100 mm Y - Travel        1000 mm Electro magnetic table      4000 x 1000 mm Grinding wheel size      500 mm kW power on spindle      30 kW DIMENSIONS Length     11000 mm Width       4100 mm Height      4100 mm

Grinding length: 950 mm Grinding width: 440 mm Grinding height: 500 mm Wheel diameter: 0 mm Spindle power: 3000 kW CNC Brand: Fanuc MACH-id    4104 MAKE       OKAMOTO Japan TYPE         ACC 95 EX YEAR        1998 SPECIFICATIONS Controll        FANUC in 2 Axis Cylindical / Surface / Other      Surafce grinder X - Travel      950 mm Y - Travel     440 mm Z - Travel      500 mm Electro magnetic table      800 x 400 mm Work piece weight    500 Kg Spindle speeds / ranges       3000 Rpm Coolant / Filtration /Yes DIMENSIONS Length      4870 mm Width       2690 mm Height       2400 mm

- with swivel milling spindle - Three-phase motor 6.5/8.0 kW f. 6 speeds 1500/2250/3000/4500/6000/9000 rpm. - Electronic digital displays incl. 2 separate rotary switches for electr. Height and swivel adjustment of the milling spindle (rapid and creep speed in all directions) -Push button for electric upward movement - Milling fence with fine adjustment and Steel Stop Jaws Specifications: Table size 1350 x 800 mm Table height 870 mm Swivel range -5 degrees to +45 degrees Height adjustment approx. 150 mm Mandrel 30 mm, MK 5 Suction nozzle 120 mm diam., 2 pieces Dimensions (LxWxH) 1400 x 1300 x 1150 mm Weight 950 kg. incl. Holz-Her 4-roller feeder (8 speeds), Aigner table extension and stop for insertion milling.

Motor spindle Manufacturer: Fischer Spindle type: MFWS-2308/16/3 Condition: completely overhauled (used) Speed 3-stage infinitely adjustable Stage 1: 8 500 min.-1 Stage 2: 14,500 min.-1 Level 3: 16,000 min.-1

Motor spindle Manufacturer: White Model / Spindle Type: 175653 Condition: completely overhauled (used) Speed 3-stage infinitely adjustable Stage 1: 8 500 min.-1 Stage 2: 14,500 min.-1 Level 3: 16,000 min.-1

Multi-spindle drilling machine make STEINEL type BGS 140Machine -No: 9482Technical specifications:Number of spindles max .: 12 pieces:Articulated spindles installed: 3 pieces8 spindle speeds: 355 - 2800 rpm:Motor power: 1.2 kWDimensions L x D x H: 500 x 700 x 1900 mmWeight: 172 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic articulated spindle drilling machine make WÖLFEL type GBK 20Fabr. -No: 102028, built in 1975Technical specifications:Number of articulated spindles: 4 pieces18 spindle speeds: 75 - 1600 rpmTable size with channel: 800 x 660 mmTable adjustment via: hand crankHeight adjustment of the drilling head: hydraulicDrive power: 3.3 / 4.4 kWExternal dimensions of the machine: 800 x 1150 x 2900 mmWeight approx: 2000 kgWith- separate control cabinet 1000 x 550 x 1150 mm- separate hydraulic 700 x 400 x 1050 mm- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi-spindle and tapping machine make WÖLFEL type GBK 10Machine -No: 101015, built in 1985Technical specifications:Hole pattern diameter: 340 mm18 spindle speeds: 140 - 3000 rpm.Max drilling stroke: 400 mmTable size: 550 x 460 mmDistance table / drill headi. top position: 1300 mmDrive power: 3 kWExternal dimensions: 1300 x 850 x 2850 mmwith- extensive accessories- separate control cabinet- separate hydraulicsused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

Asynchronous motor, main spindle drive, 2AD100C-B05OB1-AS03-C2N1, R911246799, Rexroth, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. - Asynchronous motor, main spindle drive - Power: 12.6 - 18.9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

Asynchronous motor, main spindle drive, 2AD100C-B35OA1-AS03-A2N1, R911264223, Rexroth, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. - Asynchronous motor, main spindle drive - Power: 12,6 - 18,9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW

number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW

turning speeds:10000 U/min output:22 kw weight approx.:20 kg transmission ratio:1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case.

number of spindles:6 spindle passage:67 mm cam controlled multi spindle automatic lathe six main spindles D=67mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:81 mm cam controlled multi spindle automatic lathe six main spindles D=81mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:100 mm cam controlled multi spindle automatic lathe six main spindles D=100mm This is a sample image Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Main spindle control, RAC 2.3-250-380-A-00-W1, Indramat Bosch Rexroth, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The high quality part comes from a spare parts stock of a mechanical processing of a large automotive manufacturer. The main spindle control was repaired by Bosch Rexroth. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Double-sided double-spindle drilling and grooving machine Balestrini Pragma Top Characteristic Overall dimensions, mm - 1600х1600х1300 Power, kW - 4,5 Machine weight, kg - 1500 Drill diameter, mm - 16 Table height, mm - 950 Distance from the table to the spindle, mm - 100 Clamp - pneumatic

High-speed milling spindle HENNINGER Type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Stem dimension 110 mm (machine spindle to tension nut Tool holder MK4 with tightening thread M16 Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12,5 / 13 / 14 mm Net weight 6,5 kg good condition; used

DC main spindle drive, power converter device with digital control Simoreg V55 spindle module, drive controller, rectifier, DC regulator Manufacturer SIEMENS type SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0 Version V55 Basic unit Input voltage 3 AC 380 V Input frequency 50 / 60 Hz Input current 49 A Output voltage 380 VDC Output current 60 A Nominal power 22 kW Dimensions (W x H x D) 270 x 260 x 290 mm Weight approx. 25 kg The drive controller is still ready for operation in a Gildemeister GDM42. You can find the right drive motor under stock number 60347 Further components from Gildemeister can be found under stock number: 60346, 60347 , 60348; used

No. 5219: 1 Gebr. Spindle motor Fabr. SIEMENS, type 1PH6 206-4NE49-Z, with weight approx. 500 kg Drive power: 63/93 kW No. 5219: 1 used spindle motor Make SIEMENS, mod. 1PH6 206-4NE49-Z, with weight approx. 500 kg Main engine: 63/93 kW

Universal face and boring head LENZ Type LPA 1S Spindle tool, spindle head similar to WOHLHAUPTER UPA3 Tool holder: SK 40 - M16 Adjustment accuracy: 0.01 mm - Accessories as shown - Storage box Net weight: ca.5 kg good condition; used

spindle tilting: yes-5 bis +45°; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: manual; read out height: digital; read out tilting: digital; read out fence: scala; spindle diameter: 30 mm; speeds: 1500, 3000, 4500, 6000, 9000, 12000 U / min; motor power: 5 / 6 kW; motor brake: yes, automatically; suction connection: 2 x 120 mm; machine length: 1200 mm; machine width: 1400 mm; weight: ca. 950 kg;