We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,560 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Industrial washing machine degreasing Disse GmbH Industrial washing machine for cleaning and degreasing machine parts of all kinds Rotary basket diameter approx. 95cm Two pneumatically opening doors on each side for: dirty side / clean side Outer mass Height approx. 240cm Width approx. 120cm Depth approx. 140cm Weight approx. 800kg
used
HST Maschinenbau GmbH homogenizer, type: HL 3-210T, serial number: 13DA242, year of construction: 2013, 55 kW, maximum pressure: 210 bar, weight: 3000 kg, capacity: 8000 liter per hour, dimensions: 1070 mm x 2000 mm x 1340 mm.
used
Ecolab Europe GmbH water filter system, type: UO 15000 AS/KS/SO, number: 38592, year of construction: 2016, 400 V, 50 Hz, 18 kW, 25 bar, dimensions: 4700 mm x 1200 mm x 1430 mm.
used
GEA Ecoflex GmbH plate heat exchanger used as cooler, type: NT 100X BC-10, number: 122/10147, volume: 117.88, PS: 0/8 bar, TS: -5/100°C, PT: 10.4 bar, dimensions: 1350 mm x 600 mm x 2100 mm.
used
Friedrich Wilhelm Heider GmbH horizontal tank used for hot water, year of construction: 1993, volume: 30.000 liter, maximum working pressure: 10 bar, maximum working temperature: 95ËšC, dimensions: 7000 mm x 2750 mm x 3150 mm.
used
Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!
used
Treif Maschinenbau GmbH slicer, model: DIVIDER 660+, machine number: 660003.244831.146031, year of construction: 2021, 380/480 V, 3 Ph, 50/60 Hz, 14 A, 7.5 kW, weight: 850 kg, plastic outfeed belt, belt width: 380 mm, total dimensions: 1850 mm x 1000 mm x 2410 mm. Including parts and extra knife.
used
Treif Maschinenbau GmbH slicer, model: DIVIDER 660+, machine number: 660002.219125.136225, year of construction: 2018, 380/480 V, 3 Ph, 50/60 Hz, 14 A, 7.5 kW, weight: 850 kg, plastic outfeed belt, belt width: 380 mm, total dimensions: 1850 mm x 1000 mm x 2410 mm. Including parts and extra knife.
used
Nedcon Lagertechnik GmbH steel pallet rack, type: NR 1, year of construction: 1992, consisting of: (2x) 23 uprights, dimensions: 1100 mm x 20000 mm, (2x) 380 beams, length: 2900 mm.
used
Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible
used
Nedcon Lagertechnik GmbH steel pallet rack, type: NR 1, year of construction: 1992, consisting of: (2x) 23 uprights, dimensions: 1100 mm x 20000 mm, (2x) 380 beams, length: 2900 mm.
used
Systec GmbH autoclave, type: VX-95, serial number: 6353, year of construction: 2015, 3 x 400 V, 50/60 Hz, 15.5 A, design temperature: -10 / 150ËšC, design pressure: -1 / + 4 bar, volume: 104 liter, dimensions: 800 mm x 550 mm x 1200 mm.
used
2 centrifugal pumps / self-priming Type: KSP 50 /150-2.3 Manufacturer: KPA Artern, Germany Capacity: 10,000 l/h Speed 1,420 rpm. Connections: Inlet NW 50 / Drain NW 50 Material: Stainless steel Medium: beer, wine, milk, etc. Connection: 380 V, 2.2 KW Weight: approx. 43 kg Dimensions: 50 x 30 x 35 cm Technical condition: refurbished
used
For sale a CNG natural gas traportable bundle Wystrach 600 litre 200 bar. Operating pressure: 200 bar Built: 2005 steel-built Dimensions: 120 x 80 x 180 cm Weight: 1000 kg
new
The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...
used
Alfred Bolz GmbH & Co s/s tank, number: 10 87 44/4, year of construction: 1981, capacity: 62.600 liter, dimensions: ø 3300 mm x 9600 mm.
1 Qty. 1 Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV G Built: 1989 Strip width max.: 2000 mm Wall thickness: max. 25 mm / Ø 530 mm 2 Qty. 1 Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV Hy Built: 1981 Strip width: max. 3500 mm Wall thickness: max. 12 mm 3 Qty. Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV Hy Built: 1983 Strip width: max. 3500 mm Wall thickness: max. 19 mm 4 Qty. 1 Second-hand 4 roll bending machine Mfc.: SW GmbH Type: SVRM Built: 1981 Strip width: max. 2000 mm Wall thickness: max. 16 mm
used
Waldner Laboreinrichtungen GmbH & Co. KG / Scala fume hood, year of construction: 2010, 230/400 V, 3 Ph, 50 Hz, 32 A, dimensions: 2150 mm x 910 mm x 2720 mm.
used
Haake water bath F3 thermostat thermal bath water bath temperature 20°-270°C Manufacturer: Haake GmbH Type: 001-4202
used
Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5
used
1 cool- and heatable, sterilizable, vacuum-resistant stainless steel process tank for the production of dairy, delicatessen, pharmaceutical and cosmetic products Manufacturer: Seitz-Werke, GmbH Type: DB 170. FW Machine. No.: 2226 Content: 187 litres Material: stainless steel V4A / 1.4571 Product-contacted parts polished Product room: pressure-resistant to 3 bar Double jacket for heating and cooling Double jacket: 35.5 litres, pressure-resistant to 2 bar Operating temperature: up to 133 C Ventilation and vent valve Rise tube Pointer thermometer from 0 - 160 C Pressure gauge Safety valve Filling opening NW 60 Bottom seat valve NW 20 Agitator flange available Operating instructions + list of spare parts, etc. Dimensions: approx. 0.8 x 1.4 m Weight: approx. 200 kg Technical condition: used, excellent as good as new operating condition
used
2 centrifugal pumps / centrifugal pumps, self-priming Type: KSP 50 /150-2.3 Manufacturer: Kyhäuserhütte Artern, Germany Power: 10,000 l/h Speed: 1,420 rpm. Head: 14 m Connections: Inlet NW 50 / Drain NW 50 Design: Stainless steel Media: beer, AfG, milk, lye, etc. Connection values: 380 V, 50 Hz; 2.2 KW Weight: approx. 43 kg Dimensions: 50 x 30 x 35 cm Technical condition: refurbished
used
APV Gaulin GmbH homogenizer, type: 2774 MC 25-3 TPS, serial number: 93L34298, capacity: 10500 l/h, permissible operating pressure: 200 bar, permissible operating temperature: 80 °C, power: 75.0 kW, weight: 2700 kg, dimensions: 1500 mm x 1600 mm x 1400 mm.
used
Thrun Behälter- u Apparatebau GmbH double jacketed s/s tank with mixer, number: 314185, year of construction: 1991, volume: 17000 liter, PS: 3/-0.9, TS: 20°C, dimensions: Ø 2900 mm x 4600 mm.
used
Rühle GmbH mobile cooled vacuum tumbler, model: MKR 220, number: 0685, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 16 A, 3.8 kW, volume: 220 liter, Busch vacuum pump, model: KC 0010 E, year of construction: 2017, capacity: 12 m³/h, dimensions: 1200 mm x 1300 mm x 1720 mm.
used
1 banding machine with shrink tunnel Manufacturer: Urban Maschinenbau GmbH, Germany Type: SB 500 Fully automatic linear banding system to different types of products in groups and stacked high with shrink wrap to package. The banding system works with two film roles, cross sealed. Product feed with motorized infeed conveyor, linear Motorized film reel (top and bottom) Sealing and cutting through hot clamping with electronic temperature control Control Panel for easy control of all machine functions Direction of rotation of the machine: from left to right Ventilated electric cabinet Formats / products: Length: 200 mm Width: 180 mm Height: 210 mm Capacity: up to 2,400 products / h, depending on the product integrated heat shrink tunnel Tunnel width: 500 mm / tunnel height: 220 mm Electr. Supply: 380 V, 50 Hz Dimensions: approx. 2.5 x 2.0 x 1.8 m Weig ...
new
We offer for fast CHP Scania DC12-16 motors/hull motors in exchange. MIW Motoren-Instandetzunsg-Werk GmbH North-West Ring 8 D-27404 Zeven/Germany E-mail= info at miw-zeven
new
We are stocked for CHP Fast with Scania Motor DC12/16 fuselage motors. MIW Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven/Germany e-mail: info at miw-zeven
used
cutting width:2500 mm Numbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kW length:6000 mm control:KS 20 A Messer Griesheim Documents:vorhanden
used
Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg
used
This is a special machine for the machining of ball bearing slewing ring supports, controls: Siemens SINUMERIK 810M, with documentation, one circuit board is defective.
used
X-travel: 650mm, y-travel: 650mm, z-travel: 650mm, clamping surface: 400x400mm, max. load: 400kg, length: 4600mm, width: 3920mm, height: 2900mm, weight: 12.8t, operational hours counter: ca. 60,000h, with documentation, was maintained regularly.
used
Kneading machine Kemper SPL 75 - 100 litres Masch. No. 672500 Strong and robust kneading machine in very good and well-maintained condition. Kneading machine from bakery.- 2 speeds- front and return pulse function timer no longer runs out- Operating hours: see photosPallet size, weight approx. 500kg (note when picking up) The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
P213 - used approx. 30 m3 / 30,000 L polyester tank, GRP tank, Speidel tank, standing, flat bottom. Technical details: Content: approx. 30 m3 / 30,000 litres Material: Polyester tank / GRP tank Manufacturer: Speidel Tank- und Behälterbau GmbH Dimensions: approx. 3.00 m x approx. 4.60 m high Other: Used polyester tank in very good condition, manufacturer Speidel. Vertical flat bottom tank, dome at the top of the roof, several connections, incl. filling line. The container can be used as a storage tank for many different media such as water, liquid food, whey, potato vapour bowls, molasses, manure, seepage juice, rapeseed oil or as a rain collection tank, etc. Price on request. Transportation can be arranged cheaply. We can also rework the tank as desired, please ask us. It is not possible to update all our listings daily. As our stock is constantly changin ...
new
Machine type TIG inverter welding system gas-cooled DC system Make Merkle Type MobiTIG 190 DC Connection voltage 1 x 230 volts Adjustment range 5 - 190 ampere Switch-on time 20% ED at 180 amperes 100% ED at 90 amperes Current adjustment infinitely variable max. weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare part box kpl. Equipped 18 month warranty 1 piece user manual New price €1,590.00 + VAT Price kpl. wi ...
used
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
used
Suction fan Pipe of 300 mm Engine 4 kW The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5
used
Weight: 1.05t, with documentation, an inspection is possible.
used
Was used to rework profile rollers for a hot rolling mill, was regularly serviced, with accessories, without spare parts, on-site inspection is possible, no videos available.
used
Working length: 3050mm, pressing force: 2500kN, number of operational hours unknown, including set of tools and documentation, on-site inspection is possible.
used
+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Industrial extraction system NESTRO NE160 manufacturer: NESTRO Lufttechnik GmbH type: NE 160 mach.-Nr.: 1041 year of construction: 1994 comm.-Nr.: 0549/210/100/0859 stock-Nr.: 1803 + Regular Price: 2.180,- € > Reduced Price: 1.090,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) intake manifold Ø: 160 mm filter area: 11,5 m² volume flow: 1.780 m³/h (after cleaning) Negative pressure in front of ventilator: 3.000 Pa Minimal volume: 1.447 m³/h Negative pressure in front of ventilator: 3.550 Pa Negative pressure at connection: 3.100 Pa – (4,0 m hose length mit Ø 160) working temperature: 5° to 4 ...
used
Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.
used
Table crosscut saw Irion UKS 800 DS Masch. No. 1360 Stop left 7 m Stop right 3.5 m Feeder Roller conveyor 400 mm wide Roll 300 mm long with programming control with documentation with data storage L x W x H Machine: 1650 x 1650 x 1750 mm Built in 1994 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12