We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,771 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Longitudinal X: 2600 mm Cross Y: 700 mm Vertical Z: 700 mm Positions ATC: 12 CNC Brand: Heidenhain CNC Model: iTNC 530 X – Travel: 2.600mm Y – Travel: 700mm Z – Travel: 700mm A – Axis: 360000° B – Axis: +/- 110 ° Table Length: 2.900mm Table Width: 700mm Table load: 2.150Kg Table Ø: 750mm Feed rate X-Axis: 40.000mm/min. Feed rate Y-Axis:&n ...
used
Power: 5.5kW, length: 2800mm, width: 1300mm, height: 1700mm, weight: 2.7t.
used
Max. operating pressure: 70bar, hydraulic fluid filling quantity: 630l, with loading portal and sliding guide with carriage.
used
Blade length: 5600mm, opening width: 1000mm, band length: 2800mm, an inspection is possible.
used
Opening dimensions: 1300x700mm, cutting speed: 0.4-2,5m/min, cutting range: 5-60mm, length: 4000mm, width: 2500mm, height: 2500mm, suitable for XPS plates, including conveyor belt.
used
With documentation, the machine was only in operation for a few hours, has adjustable shoulders and matching format parts, an on-site inspection is possible.
used
Bag dimensions: 30-400x10-200x0-70mm, max. output: 250 bags/min, connected load: 4.5kW, length: 3000mm, width: 1075mm, height: 1600mm, weight: 900kg.
used
With documentation, an inspection is possible.
used
With documentation and some accessories, an on-site inspection is possible, but not under power.
used
Output: 200-300hl/h, operational pressure: 7bar.
new
pressure: 80 t stroke: 285 mm flat steel: 300 x 25 mm working feed: 10,0 mm/sec return speed: 10,0 mm/min work height max.: 930 mm table:: 750 x 1425 mm total power requirement: 10,0 kW motor: 400 Volt 50 Hz weight: 1700 kg range L-W-H: 1500 x 750 x 1800 mm oil volume: 120 l Furnishing : - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 40 t stroke: 285 mm flat steel: 250 x 24 mm working feed: 10,0 mm/sec return speed: 10,0 mm/min work height max.: 930 mm table:: 660 x 1250 mm total power requirement: 4,0 kW motor: 400 Volt 50 Hz weight: 1450 kg range L-W-H: 1450 x 650 x 1800 mm oil volume: 40,0 l Furnishing : - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 20 t stroke: 185 mm flat steel: 200 x 12 mm working feed: 10,0 mm/sec return speed: 10,0 mm/min work height max.: 930 mm table:: 480 x 1060 mm total power requirement: 2,2 kW motor: 400 Volt 50 Hz oil volume: 12,0 ltr. weight: 530 kg range L-W-H: 1150x480x1200 mm Furnishing : - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Stepless adjustment of speed / pressing force - Double foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
There are three identical machines available, connected load: 8.5kW.
used
Capacity round maximum diameter: 90 mm Angle degrees maximum: 290 Capacity square: 290 mm Workpiece height: 34 mm Workpiece width: 11 mm Capacity rectangle: 290 mm easy intuitive touchscreen panel clear Mitre cutting angle scale Double Mitre cutting L + R Working height vice 795 mm Coolant tank 35 L with bronze nozzle Capacity 90°400 ° Cutting flat 90°460 x 300 mm Capacity L 45°290 ° Cutting 45°300 x 200 Cutting speed Vario15 - 90 Circle blade size4300 x 34 x 1,1 mm Power3 kW
new
cutting diameter: 170 mm dimensions of saw-band: 2080 x 20 x 0,9 mm table height: 880 mm cutting speed: 40 + 80 m/min : 170 mm : 125 mm : 150 x 190 mm : 95 x 120 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 870 x 1.550 x 1.740 mm mm Miter band saw Demonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 30 - 75 m/min connected load frequency: 230 V capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm total power requirement: 2,35 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Drilling capacity: 292 mm Drilling depth: 12000 mm Spindle taper: 275 Number of heads: 1 CNC Brand: Fanuc CNC Model: Fanuc O-M Drilling depth 12.000 mm 3 chuck 710 mm Bore 292 mm Min. steady diameter 50 Max. steady diameter 400 Speed Range 1 : 0 - 500 Speed Range 2: 500 - 1000 Min tool diameter : 50 max tool diameter : 275 Dimensions (Estimate) Length35000 mm Width4500 mm Height2400 mm Weight55000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
new
CNC flat and profile grinding machine Control: CNC SINUMERIK 840 D workpiece size 800 x 400 x 360 mm Table load: 500 kg Grinding wheel dimensions: 500 x 203 x 80 mm Spindle speed: 600 - 2000 rpm Total power requirement: 62 KW Dimensions: 6.2 x 2.8 x 2.78 m Machine weight: 7,100 kg
used
CNC portal machining center make PORTATEC type PBZ 30/18Year of construction 1999Table mounting and processing surface X u. Y: 3000 x 1800 mmvertical processing height Z: 300 mmSpindle mount: ISA 30Number of tools in the magazine: 8Passage between the uprights of the portal: 2080 mmSpindle speed: 1500 - 24000 rpm.External dimensions approx: 4000 x 2500 x 1800 mmDrive power: 7.5 kWWith- Portatec-Siemens control- Tool changer- Vacuum pump for table clamping- add. Pre-head clamping on the table- dedusting system- Handheld remote control device- many tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CNC machining center Fabr. LEADWELL type TDC 450Machine -No: LISIE0304 built in 1995X-axis: 450 mmY-axis: 350 mmZ axis: 250 mmTable mounting surface: 660 x 350 mmSpeed range milling: 10000 rpm.Tool holder: BT 30Feed range: 1 - 12000 mm / min.Rapid traverse longitudinal / transverse / vertical: 36 m / min.Total power requirement: 10 kWDimensions approx: 1700 x 2400 x 2600 mmWeight approx. 2.0 tonsWith- Fanuc controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Horizontal CNC machining center make MATSUURA type MC 600 H - 45Masch. -No: 870706216 Year of construction 1987Table work area: 450 x 450 mmTable longitudinal path X: 600 mmvertical travel of the headstock Y: 450 mmStander traversing Z: 480 mmTable index increment: 0.001 mmMax. Table load: 500 kgNumber of tools in the changer: 50Distance table spindle axis: 85 - 525 mmCenter of table spindle: 125 - 605 mmSpindle diameter: 80 mmSpindle mount: BT 40Spindle speed: 30 - 6000 rpm.Rapid traverse XYZ: 15000/15000/15000 mm / min.Feed rate stepless: 1 - 5000 mm / min.Drive power: AC 7.5 / 11 kWWeight: 8200 kgWith- CNC control Fanuc 11 M- Number of change tables 2- a lot of tool holders- 14461 operating hours- Chip conveyorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Err ...
used
CNC machining center for wood/plastic and composite materialMake REICHENBACHER type Vision - 1, year of construction 1999Technical specifications:Travel X:3740 mmTravel Y:1680 mmTravel Z:340 mmC axis = rotation: +/- 360°Feeds axis speed: 60 m/min.Feed web speed: 85 m/min.Z axis: 20 m/min.C axis:90°/sMilling unit speeds: 1500 - 18000 rpm.Tool holder: SK 40Distance table and spindle min./max.: 80 / 420 mmEnd mill diameter: 24 mmProfile milling cutter diameter: 100 mmTool changer slots:12Tool length max.: 200 mmTool diameter max.: 200 mmTool mass per piece / total: 6 - 50 kgTable size: 3800 x 1500 mmDrive power: 25 kWWeight approx.: 6.5 tWith- Drilling unit spindle speed 4500 rpm., 2.2 kW- Vacuum / grid table- CNC control Siemens 810 D with central unit CCU2 and software module MMC 103- Compressed air requirement 300 - 500 L/min.- Filter systemused, in good conditionPrice on request.Deli ...
used
Hydraulic bending machine manufactured by SANDTTechnical specifications:Table size 1200 x 600 mmWidth tool 70 mmPressure at 150 bar approx. 20 t (calculated)External dimensions L x W x H 1200 x 700 x 1300 mmWeight about 1200 kgHydraulic oil content 60 lused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Drilling capacity: 10000 mm Drilling depth: 10000 mm Spindle taper: 290 Number of heads: 1 CNC Brand: Siemens CNC Model: Siemens Simatic panel Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Max. drill Ø steel:290mm Drilling depth: 10.000mm X - Travel: 10.000mm Length: 25000mm Width: 2000mm Height: 2000mm Weight: 30000kg
new
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min Control: CNC total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Flowpack machine Connection values:400 V / 50 Hz / 3 Ph Power: 2,5 kW Machine weight: 650 kg Serial number: A / 583 Condition: fully functional Availability: as of now Machine dimension (LxWxH): approx. 3885 x 880 x 1900 mm
used
Stock number: UG6346 Used stainless steel Padovan (IT) filter with horizontal rotating discs. Filtration surface 20 m2. Working output in range 25000-27500 l/h. Machine had been working on fruit juice filtration / food industry. Has local control panel and has technical documentation.
used
Fanuc touchscreen control Nikken 4th axis Twin rotary diamond disc unit - this unit is mountednbsp;vertically with a slide-way adjustment to cater for the differing grind heights. The unit is designed to mount twin opposing discs to support dressing in both directions and provide support for the 6 thou diamond tip radius.nbsp; Longitudinal travel X-axis (autom.): 1420 mm Cross-travel Y-axis (autom.): 750 mm Dimensions of the table: 1200 x 600 mm Max dia grindingstone: 457 x 100 x 203,2 mm Spindlespeeds: 10 > 1680 rpm Motorpower: 22 kW Length: 6202 mm Depth: 3445 mm Height: 2855 mm Weight: 11,8 ton
used
SNK CMV-100/5 5-Axis CNC Horizontal Machining Center New 2016 - Installed 2017 CNC Control: yes CNC Control: Fanuc 31i-B5 Main Specifications - See Below: See Below Table Size:: 1000mm x 1000mm (39.3 x 39.3 in) Distance from Pallet surface to spindle center: 0-1,300mm (0 -51.1 in) Distance from pallet surface to spindle end (when spindle is in vertical position): 0-1,000 mm (0-39.3 in) Max Table Load: 1,500 kg / table (3,300 lbs.) Spindle:: See Below Spindle Speed: 40 to 8,000 RPM Spindle Nose Taper: CT-50V (Dual face contact type) Coolant Thru Spindle: yes Spindle motor drive: VAC 30/22 kW (40/29.5 HP) Torque N-m: 26 to 653 Nm Travels: See Below Table Longitudinal (X-Axis): 1,500 mm (59.0 in) Column transverse (y-Axis): 1,330 (52.3 in) Spindlehead vertical (Z-Axis): 1,300 mm (51.1 in) Spindlehead tilt (A-Axis): +30 to -120 deg. Table rotation (C- ...
used
X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.
new
cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden
used
(2) Asahi Sunac THP500-6 horizontal forging press (heading machine) Year: 2008 First stroke: 24 mm Second stroke: 50 mm Kickout power: 150 kN Open height: 625 mm Closed height: 425 mm Die (WxL): 500x490 mm Punch (WxL): 250x350 mm Ram stroke: 200 mm Forging force: 5000 kN Cycling time: 6.5 sec Crank speed: 60 RPM Machine weight: 28 t
used
CNC Model: Fanuc CNC version: 18i-T Main spindle nose: ASA 6 Main spindle power: 22Kw Main spindle self-centering diameter: 210mm Main spindle bar passage: 65mm Turning diameter: 250mm Turning length: 500mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 X axis travel first turret: 215mm Z axis travel first turret: 510mm Rapid linear axis feeds X Y Z: 24m/min Counter-spindle: yes Spindle nose: ASA 5 Number of spins: 4000 Power against spindle: 3,7Kw Bar passage: 43mm Z stroke counterspindle : 515mm Bar loader model and brand: Iemca Master 880 Chip evacuator: carpet operated Presetting: yes Number of motorized tool holders supplied: 4 :::D IMENSIONS AND WEIGHT::: Length: 4000mm Width: 1900mm Height: 1800mm Weight: ...
used
5-Axis Horizontal Machining Center with Pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D control Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazines. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234
used
5-axis horizontal machining center Makino MCD 2016 Year of construction 2005 Fanuc 16MC + Pro 3 Controller 2-fold pallets 1,300 x 1,300 mm Pallet load per pallet max. 12,000 kg ! 4e axis B-axis 360° / 0.001° 5e axis 25° spindle holder, C-axis + /- 185° X 2,000 mm Y 1,600 mm Z 1,500 mm Spindle drive power 50 kW Spindle speeds up to 15,000 rpm. Tool holder BT50 Big Plus 99-fold automatic tool changer ATC Renishaw Touch Probe Scales on X, Y, Z, B axes Conveyor IKZ 28 bar Great condition To be visited under power Offer number MH-6265
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 15300 € : 286.11 € : 4160x34x1,1 mm : 20-100 m/min : 320 mm : 320 mm : 610x320 mm : rund 260 mm, quadrat 225 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : 740 mm : 0.12 kW : 0.37 kW : 2.2 kW : 2100 mm : 1200 mm : 1350 mm : 1150 kg : rund 320 mm, quadrat 320 blade brush control panel height adjustment by switch hydromechanical belt tension inverter material limitation shaft cooling equipment saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping € 970,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 € : 402.05 € : 4800x34x1,1 mm : 20-100 m/min : 380 mm : 380 mm : 430x380 mm : 590 mm : 0.12 kW : 0.55 kW : 3 kW : 2900 mm : 950 mm : 1660 mm : 1342 kg blade brush control panel hydraulic vice optical adjustment switch hydromechanical blade tension inverter mechanic top clamping material limit shaft coolant pump saw blade security switch gearbox pressure adjustment 1,2 meter roller table user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 9300 € : 176.7 € : 2730x27x0,9 mm : 35-70 m/min : 230 mm : 230 mm : 240x230 mm : 590 mm : 0.12 kW : 0.37 kW : 1.3 kW : 1700 mm : 800 mm : 1500 mm : 530 kg blade brush control panel height adjustment switch hydromechanical blade tension inverter mechanic top clamping material length stop coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 69200 € : 1266.36 € : 9500x54x1,6 mm : 20-100 m/min : 1020 mm : 1020 mm : 1020x1020 mm : rund 675 mm, quadrat 675 : 535 mm : 0.12 kW : 2.2 kW : 7.5 kW : 4500 mm : 1700 mm : 2750 mm : 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTION: hydraulic top clamping € 1.940,-- chip conveyer € 1.540,-- turn table for turning the machine for mitre cutting € 5.730,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 99500 € : 1820.85 € : 9600x54x1,6 mm : 20-100 m/min : 800 mm : 800 mm : 1300x750 mm : rund 800 mm, quadrat 770 : rund 570 mm, quadrat 570 : rund 800 mm, quadrat 770 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 5050 mm : 2200 mm : 2900 mm : 6700 kg Hydraulischer Spannstock Digitalanzeige für Winkelanzeige Hydraulische Klemmung des Sägearmes Sägearmdrehung von Hand Stufenlos einstellbare Absenkgeschwindigkeit des Sägearmes Automatische Sägerahmenanhebung nach Schnittende Sensitive Schnittdruckregulierung in Abhängigkeit der Materialbeschaffenheit Hydromechanische Bandspannung über Manometer ablesbar Mobiles Bedienpult Schräg verzahntes konisches Schwerlastgetriebe Angetriebene Späne Bürste Bandführung über Hartmetallplatten und Rollen Automatische Bandbruchsicherung Kühlmitteleinrichtung HYDRAULISCHE ANHEBUNG DES SÄGERAHMENS Bet ...
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 27500 € : 508.75 € : 5000x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 640x360 mm : rund 360 mm, quadrat 360 : rund 310 mm, quadrat 270 : rund 360 mm, quadrat 360 : 800 mm : 0.12 kW : 3 kW : 3000 mm : 1200 mm : 1910 mm : 1635 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (sample photo - roller table see photo - optio ...
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 51200 € : 936.96 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 0.37 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional a ...
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 78800 € : 1442.04 € : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 600 mm : 1000x600 mm : rund 650 mm, quadrat 600 : rund 440 mm, quadrat 440 : rund 650 mm, quadrat 600 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 4750 mm : 1970 mm : 2630 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was create ...
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 26700 € : 493.95 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 320 mm : 350x320 mm : rund 160 mm, quadrat 150 : rund 260 mm, quadrat 180 : rund 300 mm, quadrat 250 : 740 mm : 0.12 kW : 1.1 kW : 2.2 kW : 2100 mm : 2200 mm : 1500 mm : 1660 kg blade brush NC control panel hydraulic vice hydromechanical blade tension inverter coolant pump saw blade security switch gearbox height adjustment user manual in GERMAN or ENGLISH OPTION: hydraulic blade tentioning € 1.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 44100 € : 815.85 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available, ...
used
CNC controller: FANUC 31i-B Axes X-axis travel mm: 1.050 Y-axis travel mm: 850 Z-axis travel mm: 970 B-axis degrees: 0,001º Distance spindle nose - table surface mm: 100-950 Worktable Number of pallets: 2 Table dimensions mm: 630x630 Maximum workpiece size (D x H) mm: ø1.100x1.100 Max. workpiece weight kg: 1.200 APC time s: 15,5 Spindle Spindle speed rpm: 10.000 Spindle drive power kW: 30 (25% ED) Spindle torque Nm: 420 (25% ED) Tool system Tool holder: HSK-A100 Tool magazine slots: 90 Max. Tool Diameter mm: ø250 Max. Tool Length mm: 550 Tool-to-tool time s: 2,4 Chip-to-chip time s: 4,5 Equipment Electronic Handwheel Chip conveyor 3D Renishaw tool probe Rinsing gun Signal lamp High pressure pump Mist collector 4th axis RS 232 interface Internal coolant supply 4x pallets Toolholders are not included Machine running times Spindle Working: 6.026 B ...