heater used for sale

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...

fat baking plant Delivery time: 2 weeks Cart/Trolley: 1 loader/Kipptrögel: 10 Total length without storage: 1280 mm Total height: 1075 mm Total width: 820 mm Total length with tray: 2350 mm Total weight: 220 kg Volt / heart: 3 x 400 V / 50 Hz Power supply: 8.6 Capacity: 60 PCs Oil capacity: 67 ltr. Capacity of the trolley: 600 PCs. depending on the weight Operating instructions: german Description Digital display for the oil heater digital display for the fermentation Chamber button for lifting the basket button for lowering the basket

Used stainless steel fluid bed dryer made by Glatt model WST CD 30. New 1988. Pressure 2 bar. 15 KW ventilator, air heater and cyclones included. Unit still installed. Control Panel.

1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.

Fig.1 screen master 2000 Regulating, control and recording device was used in a dairy to control and record the milk heater.

Tank internal dimensions (lxwxh) 700x550x500mm Exterior dimensions (lxwxh) 880x730x750mm Basket dimensions (lxwxh) 640x490x80mm Ultrasound peak power 8000W 40 kHz operating frequency (others available) max. capacity 175Liter Heater 6KW 400V/50 Hz Clip on lid or hinged cover possible also available rinsing baths or dripping plates.

Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 m³ Tank for dirty HCl: 50 m³ Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 310 m³ Qty. 3 Baths HCl 152.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built:

Description Brand Pro Froid Model Copeland Scroll ID SH4797 Status Active Year of manufacture 2010 Location Bucure?ti / Bucharest (RO) Old price: 13 500 Euro. 1. Refrigeration and Climate Circuit 1.1. Pro Froid (Franta) GC4/CCR3SH 4PCS15ZC/SC Packed air cool condensing unit: • 3 pcs. Semi-hermetic Piston Bitzer 4PCS 15.2Y compressors • 3 pcs. crankcase heater • 1 pc. Liquid receiver • 1 pc. HP and LP safety pressure switches • 3 pcs. HP safety pressure switches • 3 pcs. LP safety pressure switches • 3 pcs. electric panel boxes – IP 54 • 3 pcs. electrical engine protection devices • 3 pcs. Mounted valves on compressors • 1 pc. Automatic electric panel • 1 pc. oil management system 1.2. Electric and control panel 1.3. air cooled condenser S060 3MSC 6PH/6PL SV 1.4. Helpman / Alfa Laval coolers / ventilators / fans – 17 pcs. 1.5. Electri ...

Producer: BONGARD Weight: 160 kg Length x width x height: 1230 x 780 x 550 mm Power supply: 400V/50 Hz Convection steam oven - Heater rods 10.30 kW - 4 shelves inside dimensions 400 mm x 420 mm - Height between the shelves 90 mm - Temperature up to 250 ° C Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 ABC.inter-wiba.com.pl Info@inter-WIBA.com.pl Tel. 0048 33 8125860

C350 D5 Open A019J715 Genset Model C350 D5, 350kVA Standby, 320kVA Prime, NT855G6, Diesel, Open Emergency Standby Power (ESP) Emission Level; No Certification Local Code and/or Regulation, CE Output Voltage, 400/230, 3Phase, Wye, 4Wire Engine NT855G6 Engine Air Cleaner-Duty Rating, Normal Duty Engine Coolant Heater, 240V Main Generator HCI4E, 50Hz, 12 Leads, 380-415V, 163C, Emergency Standby Power (ESP) Exciter/Voltage Regulator-Torque Match Exhaust Silencer Grade, Industrial, Flange BS10, Inlet 6 Inch, Outlet 6 Inch, in-Line Entry Exhaust System Accessories, Bellows Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture, 50% Antifreeze, 50% Water Primary Electrical Isolation Device One Circuit Breaker Primary Electrical Isolation Device 630A, 690V IEC, 600V UL, 4Pole, End  ...

C400 D5 Open A019J729 Genset Model C400 D5, 400kVA Standby, 360kVA Prime, NTA855G4, Diesel, Open Emergency Standby Power (ESP) Emission Level, No Certification Local Code and/or Regulation, CE Output Voltage, 400/230, 3Phase, Wye, 4Wire Engine NTA855G4 Engine Air Cleaner-Duty Rating, Normal Duty Engine Coolant Heater, 240V Main Generator HCI4F, 50Hz, 12 Leads, 380-415V, 163C, Emergency Standby Power (ESP) Exciter/Voltage Regulator-Torque Match Exhaust System Silencer Grade, Industrial, Flange BS10, Inlet 6 Inch, Outlet 6 Inch, in-Line Entry Exhaust System Accessories, Bellows Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture, 50% Antifreeze, 50% Water Primary Electrical Isolation Device One Circuit Breaker Primary Electrical Isolation Device 630A, 690V IEC, 600V UL, 4Pole ...

FOR SALE 3 SET ALFA LAVAL HEATPAC EHM 40kW TO WHOM IT MAY CONCERN; WE VE 3 PCS HEATER OF ALFA LAVAL HEATPAC EHM 40Kw AT OUR STOCK. NO. 0903-12987 MANUFACTURE YEAR 2005 DESIGN VOLTAGE 440V DESIGN TEMP. 160 C. DESIGN PRESSURE 1.5 MPa TEST PRESSURE 2.25 MPa MADE IN SWEEDEN WE VE ADDATIOANALY 2 SETS ALFA LAVAL HEATPAC EHM 72kW AT OUR STOCK IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services Info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

C440 D5 Open A019J736 Genset Model C440 D5, 440kVA Standby, 400kVA Prime, NTA855G7, Diesel, Open Emergency Standby Power (ESP) Emission Level, No Certification Local Code and/or Regulation, CE Output Voltage, 400/230, 3Phase, Wye, 4Wire Engine NTA855G7 Engine Air Cleaner-Duty Rating, Normal Duty Engine Coolant Heater, 240V Main Generator HC5C, 50Hz, 12 Leads, 380-415V, 150C, Emergency Standby Power (ESP) Exciter/Voltage Regulator-Torque Match Exhaust System Silencer Grade, Industrial, Flange BS10, Inlet 6 Inch, Outlet 6 Inch, in-Line Entry Exhaust System Accessories, Bellows Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture, 50% Antifreeze, 50% Water Primary Electrical Isolation Device One Circuit Breaker Primary Electrical Isolation Device 800A, 690V IEC, 600V UL, 4P ...

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 750 l/h power heating heater / oil boiler 70 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Laenge 1400 mm width 900 mm Height 1850 mm Weight 350 / 450 kg Gas consumption flu acetic gas 5.5 kg/hr. Gas consumption natural gas natural gas 7.5 m3/hr. ; New machine - best condition

Mouldingpresse The MP / 3E is a hydraulic press for the production of Clayprofilen such as rubber seals, protective, decorative or chrome strips. By inserting an appropriate form template in the bolt head, almost any profile can be produced up to a diameter of 65 mm. Manufacturer: Wadhwa Type: MP / 3 p Year of construction: 1995 Temperature controller Speed controller Via a rotary control a stepless adjustment of the speed is possible heated sealing head The built-in heater in the bolt head is adjustable Foot switch Weight: 125 kg Fully functional All information without guarantee Sold only to businesses

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 600 l/h power heating heater / oil boiler 55 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Oil consumption 6 kg/hr ; New machine - best condition

6000 l, steel rubberized, ruehrwerk and pump (2 pieces) Next: 6000 l, PP, pump, ruehrwerk 5500 l, steel rubberized, Ruehrwerk 6000 l insulated, ruehrwerk, heater 6000 l insulated, weighing attachment see pictures

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1000 l/h power heating heater / oil boiler 90 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm Weight 350 / 430 kg Oil consumption 10 kg/hr ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1500 l/h power heating heater / oil boiler 140 kW Electrical power 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm weight 500 / 600 kg Gas consumption flu vinegar gas 11 kg/hr Gas consumption natural gas 15 m3/hr. ; New machine - best condition

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 2000 l/h power heating heater / oil boiler 180 kW Electrical power 1.8 kW Electrical connection 230V 5 0Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm Weight 492 / 600 kg Oil consumption 19 kg/hr ; New machine - best condition

Technical data: -Operating temperature adjustable from 80 ° to 300 ° -Interior dimensions approx. B H 1000 x 1200 X 900 mm -mot. Small parts conveyor for feeding with small parts -Utility room 0.88 m³ -Total steam room 1.99 m ³ -Exhaust volume 85 m³/h -maximum amount of solvent 22 Gr. / per batch -Door opening B 1000 x H 1100 mm -Opening flap in the door approx. B 750 x H 270 mm -Power heater 24 kW -Power Fan 4.45 kW -Space requirement approx. B H 2000 x 2900 m. fan x T 1800 mm -Weight approx. 2000 kg -Control settings with or without timer min / hrs / day -Timer -controlled temperature preselection -Temperature display -Emergency - of - buttons

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 500 l/h power heating heater / oil boiler 45 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Gas consumption flu vinegar gas 4 kg/hr Gas consumption natural gas 5 m3/hr. ; New machine - best condition

Rated power: up to 400 l/h (80C pasteurtemp., 10C input temp. Juice) Thermal power: approx. 35 kW Electrical power: 1.4 kW Electrical connection: 230V 50Hz (1 phase) Electrical fuse: 16 A Laenge: 910 mm Width: 960 mm Height: 1850 mm weightweight (heating circuit emptied):260 kg weight (heating circuit filled): 360 kg Heating heater consumption: approx. 3.5 liters/h exhaust gas connection: 150mm Max. Exhaust temperature: 180C sound power level (LW, A): 83dB; New machine - top condition

Gabler D600 Thermoformer, age 2000:- Unwind Stand Indramat Servomotor Indexing. Top & Bottom Heaters, total Capacity 73.9 kW Indramat Servomotor Forming Station Forming area: 600 x 320 mm Depth of draw neg./pos.: 40/15 mm Stacking and counting Station Counted/ Stacked Products transferred automatically to Delivery Conveyor Waste Material Winder Main Machine PLC Controller: Siemens SIMATIC S5 P3 3A Heater PLC Controller: Siemens SIMATIC S5 95U Operator Touch Pad Control Panel (OPC) : Siemens SIMATIC OP27 Machine has been refurbished in 2014, New set of Cams added during Refurbishment. Excellent Production Condition

Stock number: 3291 INDUCTIONS HEATER Manufacturer: SKF, type: TIH-1000E/C650 Machine no.: 060420, year of build: 2006 Specifications: Automatic residual magnetism Max. 100 kVA Temperature control of Max 240 degree Maximum work-piece weight 2500 kg Length: 1250 mm, height: 1850 mm, width: 2870 mm, weight: 2000 kg

TO WHOM IT MAY CONCERN ; WE VE GEA WESTFALIA OIL SEPARATORS OSD 6 WITH BELOW EQUIPMENTS AT OUR STOCK PLS FIND DETAILS ON BELOW --TYPE OSD6 - 91 - 067 / 3 & OSD -91-067 / 6 YOB 2006 SERIAL NO 9037-463 & 9038 - 150 BOWL SPEED 12000 VOLT 380VOLT FREQUIENCY 50Hz --ELWA HEATER TYPE 5609-V kW 12 BAR 6 -- TRANSFER FEED PUMPS --CONTROL PANELS EX STOCK READY TO DELIVER. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Continuous Juice Pasteurizer Pasteurization Plant Pasteurizer 8500 ltr/h used heat pasteurize pasteurize cool juice durable make flow heater continuous paste sterilizer used. The pasteurizer plant was used for pasteurizing and cooling back drinks and apple juice. Manufacturer: Anlagenbau AG Worb Power approx. 8500 liters per hour Built c. 2001 0.6 m2 / 117 kW / max. 120 °C Including: - Pipe heat exchanger/tube heat exchanger and plate heat exchanger - 1x stainless steel tank with lateral rubging agitator - 1x pump type R905-2W - 1x stainless steel coolant compensating tank Odenwald Y.O.M. 1992, volume 112 liters. - Buffer tank - 3x Alpha Laval centrifugal pumps, type LKH114155 (11 kW) & type LKH113555 (7.5 kW). - Stainless steel switching/control cabinet Room requirement complete system approx. 6000 x 4400 x 3700 mm The plant has already been dismantled and  ...

Used rotary ovens W&P, Type: Rototherm REC 1280 -In bakery condition- Built in 1997 or 1994 - for trolleys 80 x 100 cm - Petrolium heater - incl. 1 pcs. trolley per oven - used in the bakery until the end - Condition: Good, well maintained El. Connection: 380 / 220 V, 50 Hz, 104 kW Baking space: 12.6 m2 Petrolium throughput: 9.0 kg/h There are 2 pieces available. Delivery costs on request. Inspection and test run are possible on request.

Complete dairy - Plate heat exchanger / milk heater from API Schmidt boards automatic heating system including documentation and temperature recording - 3 x tank storage 1000 l. each with agitator (insulated) - CIP cleaning system 3 x stainless steel container (500 l.) with direct steam injection - Process tank 160 Ltr. Content

with Ultra Turrax T25 Vacuum pump with controler IKAVAC Heater Huber Control unit RE 1621 l P various spare parts Operating manuals Dimensions LWH: 1200 x 800 x 860 mm Weight: approx. 100 kg

Used High-speed Horizontal form-fill-seal machine Fuji Alpha VII 3430 is specifically designed to package various sizes of product for a variety of industries. Machine type :FW3430/B End sealer diameter : B125 Capacity :10 to 100 packs/min Cut length: 130 to 430 mm (Up to 3,999 mm according to the spec.) Product size to be wrapped Width: Up to 170 mm Height: Up to 30 mm Wrapping film width: up to 650 mm Outside diameter: up to 300 mm Wrapped products properties: Individual food, chemicals or manufactured products Wrapping materials properties: Film which can heat and seal Motor capacity: 3.39 kW Heater capacity: 3.15 kW Electric supply source Three-phase AC 200 V 50/60 Hz 30 A (Transformer for other voltage included) Power consumption 6.54 kW

Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time

Key data: 800 , 149 , 35

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

ELWIK RT-C1 hot runner control system is a very important device for ensuring the right temperature during the injection process. The temperature controller for an injection moulding machine, having one heating zone with current load of 16 A, is used in cooperation with central nozzles, which enables the processing of all types of plastics. The temperature can be regulated from 0°C to 500°C. Thanks to the functions and protections used, the temperature cmould temperature controller guarantees continuous and uninterrupted operation, preventing, for example, complete burning out of the heater by drying it when the supply voltage is reduced. The extremely important auto-adaptation function automatically sets the P, PI, PID parameters without exceeding the set temperature, while the sequential control, especially important with a large number of nozzles installed in the mould, significa ...

ELWIK RT-C hot runner control system is a device for ensuring the right temperature during the injection process. The mould temperature controller, built in a panel system, adjusts temperature in the range from 0 to 500°C using a coding switch. The advanced technology and safety features included in the device guarantee uninterrupted and reliable operation of the mould temperature controller. The P, PI, PID parameters are set automatically by the temperature controller to the injection moulding machine, thanks to an auto-adaptation function that ensures that the pre-set temperature is not exceeded. The heater is dried when the supply voltage is reduced, completely protecting it from burning out. The mould temperature controller is equipped with six heating zones with a 16 A load per zone, making it possible to process any type of plastic. Technical specifications of the ELWIK RT-C ...

harden furnace 1200 0.6x0.6x1.0m temperature 100 - 1200 Celsius possible various size Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Ha ...

Membrane ultrafiltration XL 300 by B&P Engineering with a maximum efficiency of filtered apple juice of 30 -35 m3/h. Year of production 2007 / Expansion 2018. Very good condition. Technical parameters: 1. Membrane modules Type A19 FPA 20 12", quantity: 120 pcs. (installed on June 2022) 2. The filtration area is 300 m2 3. Capacity: 30 -35 m3/h of apple juice 12 Bx 4. Filtration/washing temperature 50 -55 degrees Celsius. c 5. Maximum working pressure 6 bar Ultrafiltration devices: 1. A block of 120 filter modules mounted on the frame of the device 2. Pump block: INOXPA DIN -FOOD, INOXPA SE26, PACO 3. CIP station: Grundfos dosing system + two capacity tanks. 100 l for  NaCLO, NaOH 4. Clear juice/CIP tank vol. 2.5 m3 5. Tubular heater 6. Control cabinet with a touch panel.

oven 1100 1.5x1.5x2m t max 1150 150kw auto door auto bogie PLC Haubenofen Schachtofen Sonderanlagen Härt en GlühenNormalisieren Weichglühen Isothermglühen Vergüten Anlassen Entspannen Hubschritt-Kettenförderofen Ringherdofen Kammerofen Durchstoßofen Drehherdofen buerstlein Rollenherdofen Gußplattenbandofen Reinigungsanlagen Schutzgaserzeuger Ofenanlagen zum Homogenisieren von Aluminium Kammerofen zum Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Fore ...

; Gross weight [kg]: 800; Engine: Perkins 403A-15G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450

; Gross weight [kg]: 2400; Engine: Volvo TAD732GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger

; Gross weight [kg]: 16780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 800; Engine: Perkins 403D-11G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: sockets 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 1456; Engine: Volvo TAD531GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 185

Key data: 1500 , 210 , 40

Manufacturer: Demag Type: 150/475 - 440 concept Year of construction: 1999 Control: NC 4 Control Locking type: Knee lever Closing force: 1500 kN Tie bar spacing: 475 mm x 450 mm Plate size: 690 mm x 660 mm WZ Installation height: min 230 max 460 mm Opening distance: 450 mm Plate spacing max: 910 mm Screw: 40 mm Lifting volume: 231 ccm / 210 gram PS Injection pressure: 1855 bar general Engine: 22 kW Heater: 11.7 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 6600 kg Screen text: German Optional extras Core train: x1 central lubrication Air valve Robot interface

1 complete ready-to-use WEHO hot air heater operated with heating oil, immediately available from the site for self-dismantling