We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,372 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
The SEEMA CS200m carton sealing machine offers all the advantages you can expect from a reliable carton sealer. The lower and upper conveyor belt drive also transports flat or tower shaped carton formats and pastes them. Width: min. 175mm - max. 500mm Height: about 450mm Strom / Volt: 240 Optional accessoriesReplacement drive belts 1345x50mm (ID6108) More then 300 machines new and second hand on our seema .de
used
Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping
used
plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm
used
Can be connected on the Alfa Laval 205 skid Check our other Resale entries
used
Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece
used
Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition
Ladies and gentlemen, we offer: Biomass Container Heating incl. storage container with hydr. Shear floor discharge Plant complete with saemt installations Heating capacity 450 kW reachable by conversions now 480 kW Hot water production Fuel: coarse, moist spaene, wood chips up to 40% HF Best measurement results: Dust content 0.04 g/m3 at exhaust temperature of 170 degrees C For more information and pictures we are available. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any w ...
used
ALFA-LAVAL Plate heatexchanger CLIP 10, YOM 1998. Used for milk pasteurisation. 5 sections, ±450 plates. good condition.
used
Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in ...
used
Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED
used
Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!
Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.
used
Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.
used
Used ceiling heater,Ideal for workshops Heat output:90/70-15C 39.5 KW Electrical voltage 1by230V Air volume flow:4640m3/pc. Speed 1330rpm Max feed temperature130C Max operating pressure 11 bar Weight 43Kg
used
Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20
used
Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
used
Fuel tank heating oil reservoirs for oil storage tank 20,000 Litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = approx. 6.90 m / D = 2.00 m / weight CA. 4,2 tons. / free charged ex works.
used
Fuel tank heating oil reservoirs for oil storage tank 20,000 Litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = approx. 6.90 m / D = 2.00 m / weight CA. 4,2 tons. / free charged ex works.
used
Fuel tank heating oil reservoirs for oil storage tank diesel storage tanks 40,000 Litres according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = 8.70 m / D = 2.50 m / weight CA. 7.5 tons. / free charged ex works.
used
Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use ...
used
GEA Ahlborn plate heaters used
used
Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 22,500 litre pressure vessel. This is a 22.5 cbm pressure vessel made of steel from the lined with an inner coating. Material S235JRG2 Steel . Container dimensions: Length : approx. 6,100 mm diameter: approx. 2,300 mm weight: approx. 5,500 kg Pressure: 10 Bar Shape: cylindrical ---------------------------------------------------------------------- --------------------- Of course, you can also help shape your tank system! All our systems are used in our company by selected employees extensively checked and checked. We also offer an inexpensive delivery on request. It is possible to ...
used
Full stainless steel heat exchanger in round shape. Previous use: heating air with steam. Suitable for heating or cooling aggressive gases/air.
used
Plate apparatus Sigma 37 Manufacturer: API Schmidt-Bretten GmbH & Co.KG Type: Sigma 37 Serial number: 61/28925/06 Output: 18,000 l / h Year of construction: 1978 Product: Solution 60% TS Temperature: 20 ° C - 95 ° C Max. Betreibsüberdruck: 10 bar Chamber: Serial number: 61/17825/04 Output: 18,000 l / h Holding time: 40 s Year of construction: 1978 Max. Operating pressure: 6 bar Tension: Initial size (new seals): 1.345 mm Biomass (seals consumed): 1,277 mm Movable lid.
used
Cat.-No. 14.00230 in very good condition Cat.-N°: 14-00230L available: 1 unit 115 m tube in AISI 304 DN 40 Mount according to your Specifications Other Sizes upon Request Measurement and weight: total height: 400 mm Width: 700 mm total length: 3000 mm weight: 185 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale General terms and conditions listed on our website. Prices are subject to change without notice. Visit our Web-Site: www.eurolux-ag.com
PCA Senertec heating oil system used with 32000 hours of operation System until the very end in operation Regulator in MSR1 Performance increase Power 5,3 kW thermal power 10,5 kW
used
Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
used
Heating power: 18.5 kW Max. Temperature: 350 ° C Max capacity: 20 ltr. 380 V / 50 Hz
used
Heating power: 18.5 kW maximum temperature: 350 ° C maximum capacity: 15 ltr. 380 V / 60 Hz
used
VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present
used
Heating capacity: 10,5 kW Max. Temperature: 350 ° C maximum capacity: 12 ltr. 380 V / 50 Hz protection class IP 54. Pressure vessels: 9 kW 12 bar 4.2 ltr. Max. Operating temperature: 350 ° C Minimum flow rate: 0,4 m³ / h
new
Electrically heated chamber furnace, make VEI type: KA_EB_TO external dimensions (w x h X d): 2500 x 2900 x 1700 mm usable dimensions (w x h X d): 1250 x 2000 x 1250 mm temperature: 250 ° C heating power: 24 kW
used
ELCO econom 2000 heating system Hall heating Air conditioning Wolf Type/serial No. 100-2 9201 Motor power 1 .1kw Nominal current 5.2/3,0A Voltage 380V Mot.Drehzahl 1500min Heat output of 63kW Air flow 5000 m³/h p.ext. 25Pa Ã?ldurchs. 6, 0 kg/h DIN-DVGW 90.03 f where Functionality is not known, the device is offered as a spare part supplier. Can the proper dismantling and pick-up at the location The iron bridge 16, 65795 Hattersheim be made. We are happy to answer questions phone 06190-93449-0 The complex can be visited by appointment. Price VB, make an offer. -> Note Please also our other ads < -. We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us! (SoPo 411)
new
Gas heated tempering furnace, make VEI type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross
used
heat holder - Alfa Laval - technical data (see also:) 750 litre/h Content: 7.31 ltr. average length: 19371 mm Diameter: 22 mm
new
Many thanks for your interest on our new Heating/cooling table for chocolate or sugar-, candy dough, please find follow our offer: Heating table / cooling table / working table for sugar or chocolate mass Dimensions (lxbxw) : 1200 x 800 x 800mm / or (lxbxw) : 800 x 600 x 800mm (after customers request we are able to produce other dimensions) Execution completely in stainless steel: folded plates made of stainless steel Standing on 4 feet, (square tube 50 x 50) optional height adjustable with two wheels and two castors water heated, closed system with electr. Thermostat, heat exchanger, circulation pump, safety valve 0.5 bar) Plate heat exchanger technical changes reserved Wir bieten diese Maschine als Neumaschine zum Verkauf an. I offer this machine as New machine
used
Short-time heating plant of API Schmidt-Bretten as a complete production line (small dairy) with integrated milk separator and storage tanks (3 insulated stainless steel tanks / 1000 ltr.) Performance: approx. 1000 LTR. / h
used
Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54
Qty. 1 Second-hand gas heated log furnace including hot shear Mfc.: ELHAUS Type: L250-90/135/4FK – WS250BD Built: 1999 Log dia.: 10” – 254 mm Log length: 5 – 7 m Billet length: 650 – 1300 mm Min. shear temperature: depending on the alloy approx. 340 – 400 °C Log temperature max.: 530 °C Heated by natural gas Hu=8.600 kcal/Nm³ Gas consumption: 234 kWh/tAl – 23.5 Nm³/t Al El. power: 130 kW Number of heating zones: 4 Number of circulating zones: 3 Dimensions of the furnace: 14.75 x 2.2 x 3.9 m - L x W x H Hot shear Recoil pressure: 0 – 100 bar Recoil stroke: 1.85 m Shear force: max. 1.69 MN at 210 bar Shear stroke: 360 mm Output pressure: max. 160 bar Output stroke: 325 mm Closing pressure: 210 bar Spreading stroke: 2 x 4.0 mm Dim.: Height above hallway: 2.9 m Length over everything: 3.95 m Width over everything: 2.65 m Hydraulic station Max. ...
new
electrical heated tempering continuous furnace external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7
used
Liescotherm heating system TG 04 No. 225724 and 225728 devices 58 KW Burner by Dr.B. Thyssen GmbH Type: IG50RN Manufacturer no. 6026 / 76 and 3136/77 L device adapted for natural gas H, operational group Year of construction: 1977 Decommissioning: 2005 Functionality is not known, the devices are offered as a spare part supplier. Can the proper dismantling and pick-up at the location The iron bridge 16, 65795 Hattersheim be made. We are happy to answer questions phone 06190-93449-0 There are 2 pieces, the plants can be visited by appointment. Price VB, make an offer. -> Note Please also our other ads < -. We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us! (SoPo 410)
used
Air heater Manufacturer: GEA Happel energy-saving technology Type: standard performance Year of construction: 1985 Technical data: Speed: 900 RPM Flow rate: 9,600 m ³/h Heating capacity: 11,700 watts Inlet temperature: 15 ° C Outlet temperature: 51 ° C Heating system: 90 / 70 ° C Maximum operating pressure: 200 ° C / 8 bar In very good condition!
used
CHP 60kW of electric power with approx. 108kW of thermal performance Compact system with enclosure and Cabinet mounted on the system. incl. power factor correction and emergency cooler.
used
Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.
used
1 pieces. tanks 30,000 litres, fuel oil tank fuel tank fuel station gas station home service station storage tank storage tanks Court gas station steel tank according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid, is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted RAL 7042 - traffic-grey. (Other RAL colours are possible upon request!) L = 10,00 m / D = 2.00 m / weight CA. 5,7 tons. / free charged ex works ...
We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.
used
Battenfeld UTR 300 heating controller for control of Unilog 4000 B
used
S1 - insulated 40,000 litres steel tank, aboveground storage tank, cased in zinc plates, heating coil inside, on 2 steel bases, former palm oil tank, good condition. Details of the tank: Contents: approx. 40 m³ / 40,000 litres material: stainless steel tank length: 9,00 m diameter: approx. 2.70 m incl. insulation / 2.50 m without insulation insulation: mineral wool approx. 10 cm, with zinc plating other: heating coil inside, single-walled The container is used, emptied inside and has been cleaned professionally. According with the age there are traces of use. This steel tank / container can be used as a storage tank for whey, vegetable oil, water, liquid food, many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. ...
used
Type: UTK 18 200-2a-2e Power: 2 X 11 kW + 1 X 7.5 of kW, 380 V, 50 Hz Perslucht: max 20-25 bar Weight: 4,000 kg YOM 1985 Scraped surface heat exchanger for heating, temperature holding and cooling of liquid, vegetable, high viscous and crystalline products. Previous used for heating, holding (volume ± 85 ltr) and with steam cooling of food products (sauces) and ammonia (NH3, 125 ltr., 17 bar,-20 ° C / 45 ° C). 2 independent ammonia system. Constant quality of the product, continuous running and inline cleaning system (CIP).
used
Pumps for heating and cooling devices as a replacement Brinkmann and Bacon, device Tooltemp Regioplast.