140,936 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Hegla Year of manufacture: February 2002 Model: VSG-A 46 MT Type of machine: Cutting system for laminated safety glass (VSG) Running direction: right to left Connected load: 35 kW Dimensions of the system (width x height x length): 13.2 x 6 x 1 meters Maximum glass size (width x height): 4600 x 3210 mm Maximum single glass thickness: 16 mm Condition: Rated 2 out of 6 (good), where 1 is very good and 6 is unsatisfactory Operational status: Operational (yes) Additional equipment: Annual maintenance carried out by Hegla Additional documentation included: Operating manual, wiring diagram, layout drawing Remarks: Stops are worn in line with the age of the machine; mechanical alignment required Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: DURMA Model: HESSE AD-R 30175 Year of manufacture: 2013 Type of machine: Edge bending machine / bending machine (press brake) Bending length: 3000 mm maximum Pressing force: 175 tons Control system: CNC control with graphic display, 4-axis controlled Connectivity: Network connection Bending capacity: Full bending width can be maximized at 8mm Table feature: Automatically controlled table pre-stressing Find more here - .ucymachines/ Contact us at - sales@ucymachines
It utilizes Near-Infrared (NIR) sensors, used in automated recycling and waste management facilities to identify and sort plastics. Note the camera needs to be replaced. The machine cant run without it. 1. General Specifications - Minimum Grain/Particle Size: 15 mm - Maximum Grain/Particle Size: 220 mm - Weight Distribution of Sorted Material: - 35 g per piece (making up 25% of the volume) - 50 g per piece (making up 75% of the volume) - Total Machine Weight: 1,650 kg 2. Electrical & Power Requirements - Electrical Connection: 380–440 VAC, 3-Phase, 50/60 Hz - Connected Load / Power Consumption: 10 kW 3. Optical & Scanning System (Light Bridge) - Resolution: 240 Pixels - Scanning Width: 1,000 mm (1 meter) - Clear Height above Belt: Approx. 250 mm 4. Pneumatic Ejection System (Nozzle Bar) - Valves with Nozzles: 62 - Nozzle Pitch / Distance: 15.5 mm - Maximum Pressure: 10 bar - O ...
sheet width: 4050 mm plate thickness: 10 mm weight of the machine ca.: 18 t distance between columns: mm total power requirement: kW dimensions of the machine ca.: m Delem DAC-362 NC-control programmable limit stop automatic cutting crack adjustment automatic cutting angle adjustment The machine has only 800 working hours Technische Daten / technical details: Schnittlänge / max. cutting length 4050 mm Schnittleistung / cutting capacity 10 mm Ausladung / overhang 210 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 15 kW Gewicht der Maschine ca. / weight 18000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 -Load capacity: kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 320 x 950 mm -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg
Max. diameter of the cut material ... 300mm Control Siemens ... Simatic S7-1200 Machine weight ... 1420kg L x W x H ... 2600x2080x2140mm The machine is in good condition. if possible under power.
A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical length measurement error: 2+L/300µm, volumetric length measurement error: 2.8+L/300µm, probe head: Renishaw PH10M, touch probe: Renishaw TP200, probe interface: Renishaw PI200. Machine dimensions X/Y/Z: approx. 1200mm/1200mm/2100mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.
Impressions=2.5 m, Condition= Very Good , Availability= 2026-07-16, 5 – Colours (4 colours, white overprint or varnish) Counter reading (black): 207,773 Counter reading (colour): 2,538,002 Auto-Duplex, Booklet finisher Bama print tray (rear, single-sided only) Documentation/manual E-43A Fiery Controller with Command Workstation 6.3. ES-2000 spectrophotometer for optimal colour calibration. 2 dual vacuum feeders (LCIT RT5100) SR5060 Booklet Maker Finisher.
- suitable for embossing and diecutting - standard machine without ink unit - with the existing accessories
- Round pile feeder RFH-56 - Automation Kit Feeder (Touch Screen) - Control unit ACC 2.4 - 1. Station with 6 buckles - 2. Station with 4 buckles - Gate fold - SBP-66+MKE-VE delivery
Key data: 40 t, 2050 mm
Hesse E 2040 - Hydraulic press brake - Cybelec DU 6000 CNC control - 3 controlled axes (Y1, Y2, X) - Manual Wila crowning table - 2 adjustable support arms - Light barriers - Incl. bending tools & operating instructions - Year of construction 2008 Technical data - Pressing capacity: 40 t - Bending length: 2050 mm - Distance between stands: 1650 mm - Rapid traverse: 150 mm/s - Bending speed: 15 mm/s - Retraction speed: 100 mm/s - Stroke: 160 mm - Projection: 350 mm - Motor power: 4 kW - Operating voltage: 3x 400 V - Oil tank capacity: 60 l - Machine dimensions WxHxD: 2800 x 2400 x 1600 mm - Weight: 4060 kg
A heated Herbst stainless steel agitator is offered. Vessel volume: approx. 15l, vessel design: double-walled, vessel material: stainless steel, agitation system: vertical process agitator, speed control: continuously variable, maximum temperature: 100°C, heating power: 3kW, agitator power: 0.37kW, vessel diameter: 280mm, vessel height: 280mm, outlet diameter: 25mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1900mm, weight: approx. 300kg. An on-site inspection is possible.
number of spindle speeds: 10.000 U/min NC rotary indexing table Ø: 630 mm control: HEIDENHAIN - iTNC 530 numbers of positions in the tool changer: 32 tool taper: SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: 900 kg Rear feed width: mm Cutting length: 5300 mm Motor output: 4,6 kW Cutting height: 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mm y-travel: 650 mm z-travel: 650 mm Control: Siemens 840 D total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 510 mm, 1500 mm, 300 U/min
Hello, I get this lathe at the beginning of August. With a lot of accessories: steady rest, lathe chuck – clamping jaws, quick-change holder and.. Heidenreich & Harbeck Type Hanseat 480 Year of manufacture 1980 Center height 255 mm Turning diameter over support 300 mm Center width 1500 mm 24 speeds from 23.6 to 2500 n1/min Tailstock MK 4 Chuck F 250 Motor 380 Volt 11 kW Transport dimensions: Length 3200 mm Width 1200 mm Height 1550 mm Weight 2.5 to. Lathe Hanseat 480 incl. accessories St Description 1 instruction manual 1 Lynette small 1 Lynette large 1 4- Jaw chuck small 1 4- Jaw chuck large 15 quick-change tool holders Set designation 2 jaws for 4-jaw chuck 38 jaws for 3-jaw chuck
Heidolph Multi Reax Multi-Tube Stirrer Speed: 150 to 2,000 rpm (electronically controlled) Orbital stroke: 3 mm Timer: up to 999 minutes with end-of-cycle signal Capacity: 26 tubes from 10 to 16 mm or 12 tubes from 16 to 32 mm Maximum load: 1.5 kg Dimensions: 270 × 172 × 410 mm Weight: approx. 9.8 kg Power consumption: 50 W Included: 2 original accessories
Description Item # 8976 – Z-BLADE GUM MIXER Manufactured by HERMANN LINDEN Double Z-Blade Mixer Type KIIN200 Bowl measures 700mms long x 750mms wide x 680mms deep Hydraulic 200litres capacity
Heidelberg Stitchmaster ST 400 Saddle Stitching Line consisting of - 6 Feeder 3 x TAS400 1 x TAL400 2 x DVU450 - Cover feeder DFA400 - Stitching Station with 6 stitching heads - 2 Loop stitching heads - 4 Standard stitiching heads - Three-Knife Trimmer TR400 - Center knife - Cross delivery CHA
x-travel: 800 mm y-travel: 630 mm z-travel: 560 mm total power requirement: 60 kW weight of the machine ca.: 12.5 t dimensions of the machine ca.: m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _______________________________________________________ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features 5-Axis SIEMENS CNC Path Control, Mode ...
max. temperature: 1350 Grad size of opening: 300 mm depth of chamber: 600 mm total power requirement: 25 kW weight of the machine ca.: 1,5 t : : : : : Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening. Model DKM 5 Year 1965 ______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mm Working height above floor 1.050 bzw. 1.625 mm Heating up time 20°-1.350° = hardening chamber 2,75 h Heating up time 20°-1.000° = preheating chamber 2,00 h Exter ...
sheet width: 3000 mm plate thickness: 4 mm work height max.: 900 mm : 450 mm total power requirement: 5,5 kW weight of the machine ca.: 4800 kg dimensions of the machine ca.: 4250 x 1500 x 1850 mm Equipment: - electric bending angle adjustment - electric upper beam adjustment - foot switch - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3020 mm plate thickness: 5 mm distance between columns: 3020 mm Control: Simatec OP7 stroke: 450 mm back stop - adjustable: 2000 mm work height max.: 900 mm total power requirement: 22 kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operators manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 420 mm throat: 400 mm workpiece height: 285 mm cutting speed: 15 - 1400 m/min table surface area: 500 x 500 mm saw band length: 3200-3400x6-20x0,9 mm work height max.: 955 mm voltage: 380 V total power requirement: 1.5 kW weight of the machine ca.: 470 kg dimensions of the machine ca.: 950 x 750 x 1820 mm Furnishing: - robust, vertical - band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL strip welding machine model BSO, with shears and grinding motor - swiveling table 15°/45° - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Hebefix A10 weight max.: 10 t machine weight ab.: 49 kg (2 Stück) kg : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Bedienpanel Heidenhain TNC 131 : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offered is a WALTER 5-axis CNC tool grinding machine for the production and resharpening of rotationally symmetrical cutting tools such as drills, milling cutters, reamers and special tools. Travels X/Y/Z: 400mm/250mm/580mm, C-axis swivel range: +/-200°, A axis: 360°, rapid traverse X/Y/Z: max. 15m/min, linear axis resolution: 0.0001mm, center height range: 130mm-165mm, max. workpiece diameter: 190mm, workpiece mounting: ISO 50, spindle motor power: 4.4kW, grinding spindle speed: 6000rpm, spindle diameter: 70mm, max. grinding wheel diameter: 200mm, control: WALTER HMC 400. Overall dimensions X/Y/Z: approx. 1420mm/2010mm/2150mm, weight: approx. 3100kg. An on-site inspection is possible.
turning diameter over bed: 455 mm turning diameter over slide rest: 285 mm turning length: 1.000 mm center height over bed: 225 mm centre distance: 1.000 mm digital readout: 2-Achsen ANILAM bed width: 330 mm spindle taper: KK 6 DIN 55027 spindle bore: 45 mm turning speed range: 16 - 1.000 U/min power requirement: 3,0 / 4,2 kW taper in tailstock-quill: MK 4 dia. of quill: 62 mm quill stroke: 145 mm coolant: voltage: 400 V total power requirement: 4,5 kW weight of the machine ca.: 1,95 t dimensions of the machine ca.: 2,45 x 1,10 x 1,80 m - Serial-No.: 29-2561 - ANILAM 2-axis digital readout - 4-jaw tool holder - coolant equipment ATTENTION! Machine is sold without a chuck. Upon request and for an additional charge, the following 3-jaw spiral chucks can be included: - CENTER Ø 200 mm = 780.00 EUR - CENTER Ø 250 mm = 1,030.00 EUR The data for this ad was created with ModulMWS - the sof ...
sheet width - max.: . mm plate thickness: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Blade length 300 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 850 mm swing diameter: 1200 mm turning height: 1000 mm Control: Siemens type: 840 D Tool changer: 36 Pos. x-travel: 870 mm z-travel: 1020 mm : live tooling: c-axis: 0 weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTe ...
x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm Control: Siemens type: 840 D size of pallet: 400x500 mm numbers of pallets: 4 : 360 ° turning speeds: 10-16000 U/min Tool changer: 160 Pos. Cooling through the spindle: spindle taper:: HSK 63 chip conveyor: total power requirement: 55 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Machine with Siemens 840 D control for 4 axes - Digital drive technology, direct position measuring systems - 4-position pallet changer - Full B-axis - Coolant system with internal coolant supply - Hydraulic workpiece clamping - Filtration system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 i ...
turning diameter over bed: 540 mm turning diameter over slide rest: 270 mm turning length: 2500 mm spindle passage: 60 mm turning speeds: 600 U/min Rapid travel: steady for max. workpiece diameter from: 270 mm steady for max. workpiece diameter from: 170 mm faceplate: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No. 47 No. 171 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...
Tol measurements: . 0 weight max.: . t range L-W-H: . mm Tool trolley with contents: 1 set of SK50 chucks High-speed spindle Spindle for internal cooling Cutter heads The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 4000 mm grinding width: 1450 mm workpiece height: 1250 mm column daylight: 1500 mm Passage height: 1420 mm table surface area: 4240x1250 mm T-slot - distance: 160 mm T-slot - width: 28H12 mm T-slots: 10 workpiece weight: 20.000 kg table speed -stepless-: 1-50 m/min grinding motor: 22 kW turning speeds: 960 U/min total power requirement: 125 kW weight of the machine ca.: 67 t dimensions of the machine ca.: 13,2x7,8x5,1 m Peripheral grinding support: 960 rpm, 22 kW Universal grinding support: 7 kW, 500-2900 rpm Dressing device The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are inter ...
used
x-travel: 2750 mm y-travel: 400 mm z-travel: 325 mm spindle taper ISO: 50 throat: 450 mm turning speeds: 31,5-2000 U/min Feed: 0,4-200 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
throat: 600 mm tool adaptor: 50,60 SK power requirement: . kW flange:: 500x500 mm Width of nail head: 270x220 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
throat: 600 mm tool adaptor: 60,60 SK power requirement: . kW flange:: 500x500 mm Width of nail head: 320x300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
degree: 250 °c width: . mm height: mm depth: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No.8505548 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: 40 control: Heidenhain type: TNC 155 milling-head swivable +/-: boring spindle: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...
x-travel: 500 mm y-travel: 360 mm z-travel: 400 mm Control: Siemens 810 tool taper: SK 40 table surface area: 800x390 mm T-slot - width: 14H7 mm number of T-slots: 6 T-slot - distance: 63 mm turning speeds: 20-4000 U/min transmission ratio: 4 Feed: 1-2000 mm/min rapid traverse: 5 m/min total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,5x2,9x1,9 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appoint ...
Heidenhain Scanning 284 786-01 / 00 22 20 2 units available The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
23286601 3 units available The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Heidenhain ROD 429 – 1250 for Indramat motors, ID 514777-03 Incremental rotary encoder with integral bearing for separate shaft coupling Output signal: TTL Shaft: Solid shaft, 10 mm, length 20 mm Electrical connection: M23 flange socket, male, 12-pin with coding pin Connection direction: radial Line count: 1250 Output signal: TTL Max. sampling frequency: 300.00 kHz Power supply: 5 V (+-10%) Flange design: Plastic flange for insulated mounting Shaft: Solid shaft, diameter 10 mm, length 20 mm Protection class: IP 64 (EN 60529) Operating temperature: -40/+100 °C Electrical connection: M23 flange socket, male, 12-pin with Coding pin Connection assignment: D312664 Connection direction: radial The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of ou ...
HEIDENHAIN Rotary Encoders and Angle Measuring Systems ROD 1424.039B/2500 ROD 1424.039B/2500 I/U ID No. 297252-32 HEIDENHAIN INCREMENTAL ROTARY ENCODER IN CAST HOUSING OUTPUT SIGNALS SQUARE-WAVE SIGNALS, TTL LEVEL ELECTRICAL CONNECTION RADIAL FLANGE SOCKET WITH CODING PIN (PIN 7) LINE COUNT 2500 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created ...
The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Positioning and route control The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
