We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,107 used machines on RESALE, but how to find them? Machine Search
used
Key data: 135 t, 3150 mm
HACO ERMS 36-135 CNC press brake was built in Belgium in 2006. The machine, with its robust construction and high press force of 135 tons, is ideal for even the most demanding machining of workpieces with a length of 3600 mm. To ensure a high level of safety and ease of use, the ERMS 135T CNC press is equipped with the intuitive HACO ATS 560 control and light curtains which prevent unwanted entry of the operator into the working area. The total weight of the press is approximately 88000 kg. Technical data of the HACO ERMS 36-135 press brake - maximum press force: 135 t - maximum sheet metal length: 3600 mm - controller: HACO ATS 560 - bending speed: 10 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - slider stroke: 200 mm - reaction time: 75 ms - distance between body walls: 3150 mm - safety distance: 300 mm - light curtains - foot control - motor power: 15 kW - ...
used
Y1 / Y2 / X / R / V Capacity: 100 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4700 mm Depth: 1600 mm Height: 2650 mm Weight: 9,1 ton
used
Hydraulic panel shears - storage machine - incl. foot switch, touch screen, rear installation room with light barrier monitoring, automatic/electric cutting gap, automatic/electric cutting angle, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - storage machine - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-
used
Specifications: - Cutting length up to approx. 220 mm - Cutting thickness - Steel with 400 N/mm² strength 4 mm - Stainless steel with 600 N/mm² strength 3 mm - Cutting angle 90 ° - Stroke rate up to approx. 35 1/min. - Depth stops left + right - Table support surface 600 x 400 mm - Table height approx. 1000 mm - E – Foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 800 x H 1200 x D 650 mm - Weight approx. 500 kg
used
Sheet thickness: 6,00 mm Sheet width: 2000 mm Depth rear gauge: 0 mm Maximum sheet thickness: 6 - 4 mm Max. cutting length: 2.060mm Strokes on full length: 30mm Strokes in short 1000 length:55 Cutting angle: 1,20 ° Length backgauge: 1.000mm Number of down holders: 9 Power: 7,5 kW Length: 2.150 mm Width: 1.750 mm Height: 1.700 mm Weight: ...
used
Capacity: 320 t Folding length: 4100 mm CNC Brand: _Unknown / Other CNC Model: Robosoft ATS 900 MACH-id 5560 MAKE HACO belgium TYPE ERM 40320 YOP 2005 SPECIFICATIONS Max. bending length 4100 mm Distance between column 3150 mm Max. pressing force 320 T Dis. Beam - Table 500 mm Beam stroke 250 mm Troth beam 330 mm Approch speed 80 mm/min. Working speed 8 m ...
used
Sheet thickness: 12,00 mm Sheet width: 3000 mm Depth rear gauge: 1000 mm MACH-id 5484 MAKE HACO TYPE HSL 3012 YOP 90 er SPECIFICATIONS Maximum sheet thickness 12 mm Max. cutting length 3100 mm Strokes on full length 17 mm Strokes in short 1000 length 21 Cutting angle 0,5 - 3 ° Length backgauge 0 - 1000 mm Number off down holders 18 Approach speed 50 mm/sec. Power 15 kW DIMENSIONS Length &n ...
used
Sheet thickness: 6,00 mm void: 0 Table length: 3000 mm Table width: 3000 mm Knife length: 3000 mm MACH-id 5325 MAKE HACO TYPE TS 306 YOP 80 er SPECIFICATIONS Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3050 mm Maximum sheet thickness 6 mm Backgauge stroke X in mm 0 - 1000 mm DIMENSIONS Length 3600 mm Width 2100 mm Height 2000 mm
used
Sheet thickness: 13,00 mm void: 0 Table length: 4100 mm Table width: 4100 mm Knife length: 4100 mm MACH-id 5322 MAKE HACO Belgium TYPE HSLX 4013 YOP 2000 SPECIFICATIONS Control Robosoft SC7p Guillotine / Lazer / Cutting table Guillotine Cutting lenght 4100 mm Maximum sheet thickness 13 mm Backgauge stroke X in mm 0 - 1000 mm DIMENSIONS Length 4300 mm Width 2500 mm Height 2200 mm
used
Sheet thickness: 6,00 mm void: 0 Table length: 0 mm Table width: 0 mm Knife length: 3050 mm MACH-id 5122 MAKE HACO Belgium TYPE HSLX YOP 2011 SPECIFICATIONS Control Cybelec CybTouch 8 Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3050 mm Maximum sheet thickness 6 mm Backgauge stroke X in mm 750 mm DIMENSIONS Length 3400 mm Width 4000 mm Height 2100 mm
used
Sheet thickness: 13,00 mm void: 3050 Table length: 0 mm Table width: 0 mm Knife length: 0 mm SPECIFICATIONS Controll SC 70 Robosoft Guillotine / Lazer / Cutting table Hydraulic Guillotine Cutting lenght 3050 mm Maximum sheet thickness 13 mm Backgauge stroke X in mm 0 - 1000 mm DIMENSIONS Length 4300 mm Width 2200 mm Height 2500 mm
used
CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...
new
: 6 mm : - t : 4 kW : 250 mm : 90 ° : 35 Hub/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 135 t : 3100 mm : 2600 mm : 400 mm : 200 mm : 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity: 150 t Folding length: 3600 mm CNC Brand: Robosoft SPECIFICATIES Besturing Robosoft Soort kantbank / zetbank / Mech. / Hydr .PressbrakeWerking Hydraulisch / Servo / Mechanisch Hydraulic Max. buig lengte 3600 mm Buig lengte tussen kolommen 3150 mm Max. tonnage T / of dikte in mm 150 Ton Uitlading 250 mm Slag lengte 120 mm Inbouwhoogte 325 mm Bereik achter aanlsag X in mm 750 mm Aantal gestuurde assen 2/3Vermogen Kw 11.4 kW
used
HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...
used
HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...
used
Sheet thickness: 13,00 mm void: 0 Table length: 3100 mm Table width: 1000 mm Knife length: 0 mm Make HACO 13 mm Type HSLX 3013 Year 2005 haco hslx 3013 with NC system SC 70 Sheet thickness (mm)T = 13 mm Sheet width (mm) L = 3.100 Depth rear gauge (mm)D = 1.000 NC system SC 70 Power 400 V / 22 kW New Euro 45.000
used
Key data: 3100 mm, 6 mm
HACO TS 3006 hydraulic guillotine shears manufactured in Belgium in 2006, are used in manufacturing plants to cut steel sheets with a maximum length of 3100 mm and a thickness of 6 mm. The machine has vertically aligned knives with four cutting edges, which ensure high precision and quality machining of workpieces regardless of the thickness and type of sheet. The angle of the cutting knives and the gap between them are adjusted by means of two levers at the rear of the machine. During machining, the workpiece is pressed against the cam in order to take an accurate measurement on the gauge located between the front stop and the bottom knife. Two parallel hydraulic cylinders drive the cutting bar (the upper knife attached to the slider) to perform the movement in the up-down direction. The HACO guillotine shears are offered with equipment which includes a foot control, a modern HACO SP ...
used
Sheet thickness: 4,00 mm Sheet width: 1500 mm Depth rear gauge: 0 mm Make Haco 4 mm Type SST 1504 Year 2002 SP8 Robosoft Haco schaar Sheet thickness (mm)T = 4 mm Sheet width (mm) L = 1.500 mmDepth rear gauge (mm)Swing beam Back stop 750 mm
used
Capacity: 135 t Folding length: 3100 mm CNC Brand: Robosoft CNC Model: ATL 2000 Make Haco 135 Ton Type ERM 30135 (Euromaster) Year 1992 Robosoft ATL 2000 - CNC Abkantpresse haco Capacity (metric tons) 135 Ton Folding length (mm)3.100 mm Down stroke or Up stroke CNC Crowning Tandem type Y1 / Y2 / X / V Axis 1 set tooling
used
electrical network - 380 V frequency – 50 Hz main fuse – 20A main engine directly on line main engine power – 7.5 kW motor with rear pressure gauge – AC 0.37 KW control: SP8 Cutting length - 3100 mm Thickness of cut sheet metal in grade S355 - 6 mm, stainless steel sheet - 4 mm.
used
sell angle notcher HACO VARI 220X220 variable angle and stainless steel blades like new
used
Sheet thickness: 6,00 mm Sheet width: 3050 mm Depth rear gauge: 750 mm Make Haco 3000 x 6 Type TS 306 Year 2000 haco schaar plaatschaar hydraulic guillotine Sheet thickness (mm) T = 6 mm Sheet width (mm) L = 3.050 mm Depth rear gauge (mm) D = 750 mm
used
Capacity: 135 t Folding length: 3100 mm CNC Brand: ATL CNC Model: 2000 Make Haco ERM 135 T Type EUROMASTER - ERM Year 1992 ATL 2000 Capacity (metric tons) 135 Ton Folding length (mm) 3.100 mm Down stroke or Up stroke Synchro Tandem type Y¹+Y²+X+ V1 set universal tooling
used
Hydraulic guillotine shear HACO TSX3006 The machine is located in Spain.
used
Shear with a capacity of 3 mts x max. 12 mm of mild steel cutting thickness,
used
Capacity 3050 x 250 tons EasyBend-2D CNC control Y1, Y2, X and R axis CNC controlled Manual Z1 and Z2 adjustment Manual crowning DSP laser safe Amada/Euroclamming Includes 1 set of tools More information on request
used
bending cap: 10 mm steel on three meter length Capacity: 140 ton x 3100 mm Passage between uprights: 2550 mm Max stroke: 180 mm Max distance between table -- ram: 400 mm Table width: 160 mm Locking speed: 60 mm/sec Working speed: 10 mm/sec Returning speed: 70 mm/sec Electric motor (power): 15 HP Weight: 14 ton
used
Specifications: Machine stands over the hallway, does not go into the floor - Printing capacity 400 t - Working width 3100 mm - Passage between stands 2600 mm - Table width 300 mm - Projection 400 mm - Installation height 500 mm - Ram stroke 550 mm - Table height 1000 mm - Drive 400 V / 50 kW - Space requirement approx. W 4100 x H 3800 x D 2200 mm - Weight machine approx. 24800 kg - Weight accessories approx. 1000 kg -with: - Swivel arm – control panel for press depth - Control ATS 460 renewed in 2007 - two-hand control panel, foot switch, - Sharpening tool 2500 mm - V – die 2700 mm - various short press brake tools
used
Haco - Com PPM 220 ton x 4100 mm CNC Capacity: 220 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 80 mm Working speed: 9 mm/sec Returning speed: 80 mm/sec Electric motor (power): 25 HP Length: 5400 mm Depth: 2400 mm Height: 2800 mm Weight: 16 ton
used
Capacity 3050 x 6 mm Adjustable backgauge
used
The machine is in good technical condition, it is possible to test it by agreement. Max. sheet length: 3000 mm Max. sheet thickness: 16 mm Weight approx.: 12000 kg Dimensions: 4200x1700x2300 mm
used
Machine Type: Press Brake Manufacturer: HACO Type: ERM36250 Year of construction: 2011 Condition: used / good Offer will only be sent if a complete imprint is provided! Location Warstein , Germany Reference MV-KÖL-0424-1 DESCRIPTION We offer you a used press brake from the manufacturer HACO. Press force 250t Bending length 3600mm further data on request. Availability: by arrangement Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted
used
Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between stands 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg -with: - Two-hand control panel with foot switch
used
sheet width: 3020 mm plate thickness: 25,00 mm no. of strokes: 4 - 8 Hub/min back stop - adjustable: ca. 1250 mm work height max.: 1040 mm Control: SC 70 cutting angle: 0,5 - 3,0 ° down holder: 18 Stück engine output: 56,0 kW weight of the machine ca.: 38.000 kg range L-W-H: 4200 x 2600 x 2650 mm good condition - ready to use (!) New price ~ 155.000 euros Furnishing: - heavy hydraulic / link-guided guillotine shears - HACO DNC - control model SC 70 200 programs x 127 sets per program Material library max. 32 materials programmable positioning from the backgauge automatic electro-hydraulic cutting gap adjustment automatic electro-hydraulic cutting angle adjustment automatic retraction from the backgauge automatic and manual programming mode Pivoting control panel, front left - electrical cutting length limitation - front finger protection - Ball casters in the table - 1x extra ...
used
This HACO PPV 30220 Bending machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO ATL 550 control unit. The machine has a pressing force of 2200 kN and a bending length of 3000 mm.
used
Haco PPM 135 ton x 4300 mm CNC Capacity: 135 ton x 4300 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3750 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 6 mm/sec Returning speed: 60 mm/sec Electric motor (power): 7,5 kW Length: 4470 mm Depth: 1550 mm Height: 2700 mm Weight: 10,4 ton
used
Capacity: 100 t Folding length: 3100 mm CNC Brand: _Unknown / Other CNC Model: BC 55 Graphical Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 100T Dis. Beam - Table: 400mm Beam stroke: 200mm Troth beam: 250mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Control: BC 55 Graphics Crowning: & ...
used
This HACO ERM 36150 bending machine was made in the year 2014 and has 1962 hours. It is equipped with a CONTROLLER M8519T control unit. The machine has a pressing force of 150 kN. Robot can be purchased additionally for price upon request.
used
This HACO HSL 3013 Shearing machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO SP8 control unit. The machine has a cutting thickness of 13mm
used
This Haco TS 3012 Shearing machine was manufactured in the year 2004 in Belgium. It is equipped with HACO SP 8 control unit. The machine has a max cutting length of 3000 mm.
used
This HACO PM 310V-3 Punching machine was manufactured in the year 2007 in Belgium. It is equipped with a TPC 50 Graphics control unit.
Description: Max. cutting length 3000 mm, material thickness 12 mm, cutting gap and backgauge can be adjusted separately via a digital display, for further details see photos weight approx.: 12,500 kg, Approx. Onsite Dimension. (l x w x h): 4,100 x 2,300 x 2,200 mm
used
pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm stroke: 130 mm dayligth: 325 mm throat: 250 mm working feed: 10,0 mm/sec return speed: 100 mm/sec table width: 180 mm work height max.: 865 mm Control: M 9101 oil volume: 225 Liter engine output: 11,0 kW weight: 11.500 kg Dimensions (LxWxH): 4270 x 1500 x 2530 mm Furnishing: - HACO / Robosoft NC control, model M 9101 controller - with external display / screen - pivoting control, front left - electric back gauge (X axis) - with 2x stop fingers, manually adjustable manual windage (Z axis) manual height adjustment (R axis) - hydraulic upper tool clamping - manual table crowning, adjustment with hand crank - segmented upper and lower tools - free-moving 2-hand control - free-moving footswitch - rear protective device (self-made) - User manual in German Machinevideo : https://www.youtube.com/watch?v=TXQTytSd_6Y&feat ...
new
: 150 t : 3100 mm : 2600 mm : 400 mm : 270 mm : 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 150 t : 3100 mm : 2600 mm : 400 mm : 270 mm : 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 200 t : 3100 mm : 2600 mm : 400 mm : 270 mm : 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 260 t chamfer lenght: 3000 mm distance between columns: mm upper beam stroke: 250 mm total power requirement: kW weight of the machine ca.: 17 t dimensions of the machine ca.: 3,40 x 1,90 x 3,45 m • Controlled axes: Y, X • Control: Haco type PB 2350 • Pivoting control panel, left front • Free-moving dual footswitch • Tool package: Stamp straight, H 175mm, approx. R 1.5 4 V block die V 15.22, 35, 50 mm Die V 100, length = 4 x 835 mm Die V 80, length = 4 x 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Working width: 3000mm, max. sheet thickness: 6mm.