We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,442 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Positions APC: 0 CNC Brand: 0 CNC Model: 0 Control: HAAS AUTOMATION Technical data Table length: 1219 mm Table width: 457 mm Table load max.: 794 kg Longitudinal travel (X-axis): 1016 mm Transversal travel (y-axis): 508 mm Vertical travel (z axis): 635 mm Pallets: number: 2 Tool changer: Number of tools: 40 Tool diameter max.: 64 mm Diameter with free adjacent pockets: 127 mm Tool lenght: 330 mm Max. tool-weight: 5.4 kg Time of tool changing: 2.8 sec Distance spindle nose to table: 742 mm Spindle speeds: stepless up to: 12000 rpm Work feed rate: 21.2 m/min Rapid traverse:: 35.6 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 22.4 kW Machine´s weight about: 6300 kg Various accessories: Coolant system: 208 l Tool setter Renishaw Pallets chanching device:
used
- Engraving pitch bottom plate: approx. 5 x 5 mm - Engraving depth bottom plate: approx. 1.45 mm - Sheet thickness: approx. 1.5 mm - Top/bottom plate connection shaft: approx. 16 mm - Collar radius: 96.5 mm
used
- Wafer size: D = 30 mm, L = 130 mm - 12 pieces
used
- Wafer size: D = 40 mm, L = 97 mm - 10 pieces
used
Steinhoff PRO 3 076 - Baking oven for rolled sugar cones - Capacity: approx. 9.500 pcs./ hour - Wafer length: 90 mm - Number of baking plates: 76 pcs. - Year of manufacture: 1998
used
Flat waffle machine HAAS SWAK 64 Haas/Hebenstreit Price £75,000 Built around 1980 Location Germany Dimensions: -Height: 1500 mm -Height machine head: 2200 mm -Width: 1300 mm -Wide machine head: 1860 mm -Length: 12,000 mm Power supply: -Power: 4 kW -Power: 3x380 V -Number of baking plates: 64 -Engraving: 2.5mm x 0.5mm -Plate size: 460 mm x 290 mm -Leaf thickness: 2.8 mm-3.0 mm -Efficiency: 450-500 kg/8 h -Weight of leaf: 55 g/leaf -Baking time: 2:20 min Machine is sold together with the arc cooler and is currently in storage.
used
Hollow hip machine Haas EWB Price: £25,000 Machines # 3379 Built: 1975 Power: 10 kg/hour Connection power: 2.5 KW Volt 3x 380 Natural gas:? Location: Poland Dimensions -Length: 3.20m Bed: 1.70m -Height: 1.40 m The machine is used to make holhippets between 50 and 220 mm in length. The thickness can be adjusted manually.
used
Haas HTRO D 200 G waffle squirrel Price negotiating matter Built in 2002 Location Poland Product: 110 x 47 mm, 23 ° Dimensions: -Height: -Width: -Length: Energy supply: -Performance: -Power supply: -Gas: Natural gas -Gas consumption: About 25 m ³/h -Number of baking plates: 100 -Number of baking courts per baking plate 2 -Engraving exterior: 6 x 6 mm -Plate size: -Core strength: 1.6 mm Machine is currently in production. Walterwerk/GAM/Haas
used
Flat waffle machine Haas SWAK 72 including arch cooler Manufacturer: HAAS Model: SWAK 72 Machine No.: 11351 Dimensions baking plate: 460 mm x 290 mm Number of baking plates: 72 Weight Net: 17,000 kg Length: 11,705 mm Height machine head: 2,030 mm Height machine body: 1,600 mm Machine is currently still in production and is sold together with an archcooler. Hebenstreit/Haas/Danger
used
HAAS SWAK 40 for waffle chopsticks Manufacturer: HAAS Model: SWAK 40 Factory number: 18812 Waffle blade dimensions: 460 mm x 315 mm 40 baking plates - 120 rods per baking plate Dimensions: Net Weight: 10,200 kg Length: 6.665 mm Height machine head: 2,030 mm Height baking machine: 1,290 mm Gas oven HAAS RAISES DISPUTE DANGER
used
Filling device electrically heated agitator tank approx. 90 litres capacity heated Mouvex ring piston pump, electric heating, control cabinet with Siemens PLC and FU for pump and agitator, in mobile stainless steel frame.
used
Haas TRO 140G Price: 110,000 € Machine No: 18767 Built: Number of baking tongs 140 , 2 baking places per pliers Upper engraving without Underengraving 5 x 5 mm Rand yes Tool 22°30' Power consumption: approx. 2.5 kw/h Gas consumption: approx. 24 m3/h Location: Germany The machine is used for the production of sweet, twisted squirrels with standard industrial size and flattop. Winders, conveyor belt, ready-to-wearer, metal detector and stacking table are included. The machine is in a well-maintained condition. The machine is currently stored. Haas, GAM, Steinhoff, Walter, Industry
used
used
Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Lenght: 340 Height: 250 Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery
used
Machine Details Warehouse number 1105-03409 Machine Type Machining Center - Vertical Brand MIKRON - HAAS Type VCE 1000 VF 3 Year of construction 1998 Control type CNC Control Haas Storage location FRANCE Country of origin USA Delivery time immediately Freight base EXW (Incoterms 2010) Technical details x-displacement 1016 mm y-way 508 mm z-way 635 mm Control Haas Table clamping surface 1219 X 457 mm Rapid speed 25 m/min Table load 1000 kg Speed range 7500 1/min Drive power - Milling spindle 15 kW Number of tools in the magazine 20 pieces Tool holder SK 40 Information IMMEDIATELY FREE IN GOOD CONDITION UNDER POWER
used
Machine Details Warehouse number 1105-03446 Machine type machining center - Horizontal Haas brand Type HCE 400 P Year of construction 2000 Control type CNC Haas control system Storage location FRANCE Country of origin Japan Delivery time by arrangement Freight base EXW (Incoterms 2000) Price Technical details x-displacement 560 mm y-way 635 mm z-path 560 mm Haas control system Pallet size 400x400 mm Table load 400 kg Spindle motor 22 kW Spindle speed 8100 1/min Rapid speed 36 m/min Pallet changer type 2-fold rotation Table indexing 360000° ° Tool magazine: 30 x BT 40 Total power requirement 54 kVA Machine weight approx. 8 t Space requirement approx. 2.8 x 5.5 m Accessories Conveyor Information Still very precise horizontal center full B AXIS 30X BT 40 TOOL CHANGER CNC HAAS 2 PALLETS 400 X 400 MM
used
Machine Details Warehouse number 1105-03536 Machine type CNC lathe - inclined bed machine Haas brand Type SL 20 THE Year of construction 2006 Control type CNC Control Haas Storage location HAGUENAU Country of origin Delivery time immediately Freight base from location Technical details Turning diameter 584 mm Turning length 533 mm Control Haas Chuck diameter 210 mm Passage 51 mm Circulation diameter 584 mm Speed 4000 rpm Power 407 Nm Power 15 KW Tool changer 12 COMPARTMENT Gear levels 0 Total power requirement 25 kW Machine weight approx. 5 t Space requirement approx. 3.3 X 2 X 1.9 H m Information CNC HAAS LINING SLIDE 210 MM+ TAILSTOCK SPAENEFOEDERER
used
- Condition: used
used
Twist drill grinding machine make HAASE type WS 20Machine -No: 40175Technical specifications:Grinding range: 2 - 20 mmDrilling angle adjustment: 60 - 180°Stepless milling angle adjustment: 0 - 25°Power connection: 220 V / 50 HzApprox. weight: 12 kgExternal dimensions approx.: 400 x 300 x 250 mmwith- 2 clampsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Machine Details Stock number 1105-03899 Machine type: CNC lathe - inclined bed machine Make HAAS Type HL 2 Year of construction: 1997 Control type: CNC Control Haas Storage location HAGUENAU FRANCE Country of origin Delivery time: immediately Freight base from location Technical details Turning diameter 250 mm Turning length 520 mm Control Haas Chuck diameter 204 mm Passage 76 mm Swing diameter 420 mm Speed 3400 rpm Power: 407 Nm Power: 15 KW Tool changer 12 SPEED Total power requirement 20 kW Machine weight approx. 4 t Dimensions approx. 3.3 X 2 X 1.9 H m Information CNC HAAS TURRET VDI 12 POSITION LINING DIA 204 MM TAILSTOCK
used
Haas VF2 CNC Vertical Machining Center 3 axis: 762x406x508 mm
used
Haas UMC 750SS 5 axis machining center Machine is like new Magnetic table(never used) Tools re included(value is around 25.000 USD)
used
Haas Minimill HE Machining center - vertical Photos attached Minimill HE
used
Haas VF-3 Vertical Machining Center Installation done November 2014 X : 1016 mm Y : 508 mm Z : 635 mm Machine is in good working condition
used
Haas VF-4 Vertical Machining Center X : 1270 mm Y: 508 mm Z : 635 mm HRT 210 CNC Servo rotary table HSM High speed machining Chip conveyor Preperationg of 4th axis
used
Haas VF3 Vertical Machining Center X : 1015 mm Y : 508 mm Z : 600 mm Machine can be tested
used
x 406mm Y 305mm Haas control Max spindle speed 6000 rpm Main spindle power 6 kW Tool magazine 10 pcs. SK 40 cone Dimensions 2.0 x 2.0 x 2.5 m Weight approx. 2.2 t
used
X - 1250mm Y - 508mm Z - 650mm - Haas controls - warehouse 20 pcs - 7500 revolutions - CT40 cone - chip ejector - documentation 4 axis hrt 210 and a faster and more powerful processor
used
X - 1000mm Y - 508mm Z - 650mm - Haas controls - warehouse 20 pcs - 7500 revolutions - CT40 cone - chip ejector - documentation 4 axis hrt 210 and a faster and more powerful processor
used
HAAS CNC milling machine - Spindle speed: 1800 rpm - Spindle motor power: 5.6 kW - Total weight: approx. 2t - maximum turning length: 762 mm - maximum turning diameter: 406 mm - from a training center with a few hours Good condition fully functional can be visited and tried on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before buying and tested under electricity. Please ask questions before purchasing to avoid ambiguity. For general questions or an appointment for a visit, I am always available at the telephone number below or above. Errors in description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
used
From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.
used
Control: Siemens 840 D X - axis 540 mm Y - axis 300 mm Z - axis 300 mm A - Axis (dividing apparatus) 360° C - Axis (rotary table) 255° Grinding spindle: HSK50 Tool changer: 4-fold Other accessories: Factory available Software: Customer-specific factory delivery Suction LTA Coolant system Turbo Separator Extinguishing system
used
Table length: 1270 mm Table width: 500 mm Longitudinal X: 1270 mm Cross Y: 508 mm Vertical Z: 635 mm CNC Brand: Haas X - Travel: 1270mm Y - Travel: 508mm Z - Travel: 635mm Table Length: 1320mm Table Width: 500mm Table load: 800 Feed rate X-Axis:20000mm/min. Feed rate Y-Axis:20000mm/min. Feed rate Z-Axis:20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:15kW Speeds / ranges:10000Rpm ATC / revolver: 24 Length: 3500mm Width: 2500mm Height: 2800mm Weight: 5500kg
used
Control Haas Clamping table surface ... 500mm Axis X ... 762mm Axis Y ... 508mm Axis Z ... 508mm Spindle speed.. 0-8100 rpm controlled axes ... 5 cooling ... 69bar BT 40 workpiece weight... 300kg Magazine slots ... 40+1 L x W x H ... 3990 x 2340 x 2570mm Machine weight ... 8664kg The machine is in good condition, possible to test under electricity.
used
Machining center milling machine HAAS EC-1600ZT from 2020. The machine is in very good condition, used on a regular basis, 100% efficient.
used
Machine Details Stock number 1105-03828 Machine type machining center - vertical Make HAAS Type VF 4 U Year of construction 2008 Control type CNC Control Haas Storage location HAGUENAU FRANCE Country of origin USA Delivery time immediately, Zwvkf. reserved Freight base from stock, freely loaded on trucks Technical details x-travel 1270 mm y-travel 508 mm z-travel 635 mm Control Haas Table clamping surface 1320 x 500 mm Rapid traverse 20 m/min Table load 800 kg Speed range 8000 1/min Drive power - milling spindle 15 kW Number of tools in the magazine 20 pieces Tool holder SK 40 Machine weight ca. 5.5 t Information SHOE MACHINE ENERGIZED INTER FACE FOR 4 AXIS
used
X : 508 mm Y : 406 mm Z : 394 mm 10000 rpm Renishaw probe Machine is in good condition
used
Haas bar feeder - Machine Test Only. NEW year 2020 Never used except for machine testing Comes without the adapter cones
used
Pig dehairing machine Haas Delivery time: 30 days after advanced payment
used
Builder: HAAS Model: 700/1500 HDWV-D Motor: CAT C9 300 HP Work Data: W. 6.850 mm x L. 2.530 mm x H. 2.700 mm Operative Data: W. 8.700 mm x L. 2.530 mm x H. 3.200 mm Year: 2011 Hourly Production: 30 t/h Rotor: 2 Pz (TWIN SHAFT) Rotor Data: L. 1.500 mm x D. 700 mm Rotor Tools: 7/6 TOOTH per ROTOR + 4 TOOLS Weight: 19.000 Kg
used
Welding laser Haas Trumpf HL124P with worktable
used
Machine Details Stock-No. 1105-03881 Type of machine milling machining centers - vertical Make HAAS Type SUPER Mini Mill Year of manufacture 2002 Type of control CNC Storage location FRANCE Country of origin USA Delivery time IMMEDIATELY Freight basis EXW Technical details X-Travel 408 mm Y-Travel 305 mm Z-Travel 256 mm turning speeds 6,000 rpm Tool Changer 10-fold Rapid Travel X/Y/Z 15.2 m/min total power requirement 5,6 kW Weight of the machine approx. 2 t dimensions of the machine approx. 2 x 2 x 2 m Additional information CNC HAAS very nice
used
VF2SS vertical machining center :::SPECIFICATIONS::: CNC Model: Haas Tool connection: BT 40 Spindle power: 22Kw Number of spindle revolutions: 12000 Number of tools: 24 X Shaft Stroke: 760mm Y Axis Stroke: 406mm Z-axis stroke: 508mm Rapid feeds linear axes X Y Z: 35m/min Table dimensions: 914x356mm Table capacity: 680Kg Guides: roller High cooling pressure: yes Pressure value: 20bar Chip evacuator: screw Presetting: yes :::D IMENSIONS AND WEIGHT::: Length: 3175mm Width: 2500mm Height: 2667mm Weight: 3629Kg
used
Pig stunning trap type SBF 1400 - For normal pigs up to 150 kg and single anesthesia - Ejection side seen to the left or right of the drive - With automatic cardiac electrode - Stunning trap covered with PE plastic sheets - Made of stainless steel 1.4301 - Pneumatically operated shut-off door prevents the pig from returning - Trap is pneumatically narrowed and the animal is thus fixed - Control by operating personnel by means of pneumatic control/electrical control
used
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm working length X: mm working length Y: mm working depth Z: mm Workpiece dimensions: mm Workingpiece thickness from to: mm Motor output: kW Number of axles: St. Number of milling agregates: St. Number of heads vertical: St. Number of heads horizontal: St. Overall size: mm Weight: kg Year: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
According to the 2019 nameplate. Purchased in 2020. Didnt work much. There is equipment. In excellent working condition. Located in Kaliningrad. Sold by a private person. Owned machine. Made in USA
used
On a Multigrind® CU, a wide variety of Precision tools for machining absolutely dimensionally accurate and produce economically. Of course, other components can also be sanded. Only approx. 6,500 h operating hours Workspace: X-axis 630 mm Y-axis 465 mm Z-axis 630 mm C-axis rotation angle 300° A - Axis SK50 (rotary axis) Option HSK80 Grinding spindle HSK50 X3 axis pneumatic Dressing unit with structure-borne noise Tool changer Workpiece changer for 4 pallets integrated 2nd probe for calibrating the grinding wheels Extinguishing system Kraft & Bauer Extraction LTA Coolant system Turbo Separator Clamping devices according to customer requirements and requirements Software package depending on process requirements On-site commissioning and training Financing of the machine possible! Delivery possible in Q4 / 2023
used
This HAAS TM 2 Vertical Machining center was manufactured in the year 2021. It is equipped with a HAAS control unit. The machine has a spindle speed of 4000 rpm.
used
This HAAS VF-4 Vertical Machining center was manufactured in the year 2022 in the United States. It is equipped with a HAAS control unit. The machine has a spindle speed of 10000 rpm.
used
This HAAS TM2-HE vertical machine center was built in 2007. It is equipped with a Fanuc based control unit and has 3 axis. The machine has an SK 40 taper.