grün used for sale

Umwaelz pump heating pump pump new and unused, ovp 1 pcs Grundfos UPC 50-120 3-400Volt 50Hz Special price Special price

Key data: 500

Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...

Technische Daten: - Saug- und Druckstutzen Durchmesser 300 mm - max. Volumenstrom 6500 m3/h - zug. Unterdruck 2500 Pa - Motorleistung 7,5 KW / 400 V - Drehzahl 3000 U/min. - verstärkter Mantel und Stahlflügelrad vorwärts gekrümmt direkt auf der Motorwelle - grundiert und lackiert - inklusive Schwingungselemente - inklusive Schaltschrank mit Stern-Dreieck-Schalter - Abmessungen L=800, B=847, H=790 mm - Gewicht 250 kg

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

Hilge GmbH (Groupe Grundfos) HYGIANA II/4 BLOC 25 m3/h

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Centrifugal pump, CRN10-02 A-P-G-V-HQQV, 20,2m, 10m3/h, Grundfos, used - overhauled Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used and overhauled! The part was bought from a spare parts store of a company, was overhauled by a specialised company and is in a very good condition and fully functional. Vertical, multistage centrifugal, Booster pump. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,75 KW, H: 15,3m, Hmax: 20,2m, Q: 10m³/h 260 x 200 x 590mm hoch, 31kg, Function guarantee for used goods! For used goods, we can not provide a conventional warranty and warranty. Since we know that the device works, we give you a functional guarantee w ...

für Türblatt und Blendrahmen Abmessungen 179 x 112 x 40 mm Für Holzstärken von 50 - 80 mm Ausführung: Werkzeugkörper aus Stahl, bestückt mit HW-Wendeplatten, HW-Kantenrunder und HW-Nutmessern. Rückschlagarm, spandickenbegrenzt, vorzugsweise für Handvorschubarbeiten. Grundgarnitur = 3-tlg. mit Wischenringen, auf Schraubbüchse 50/40 oder 50/30 Anwendung: Zur Herstellung von variablen Doppelfälzen bei Fenster- und Türenelementen. Durch Umlegen von Zwischenringen und Einsatz mit oder ohne HW-Nutmesser kann mit dem selben Werkzeug das Profil für den Blendrahmen und für das Türblatthergestellt werden.

Centrifugal pump, CRI5-2 A-CA-I-V-HQQV, 14,3m, 5,8m3/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 9m, Hmax: 14,3m, Q: 5,8m³/h 160 x 220 x 450mm hoch, 17kg, Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device d ...

ISM Shibaura N843L, 3-cylinder water-cooled diesel engine, displacement 1,662 cc, power 26.1 kw/35 hp/2,700 1/min., functional. We supply diesel engines 1-6 Zyl., various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Performance of 4.5 to 100 kw, used, partly new. Gasoline engines: 1-2 cylinders of 3-15 kw from B & S, Honda, Kohler, Robin, Wisconsin. Various coolers, starters, light machines and silencers in stock, hydraulic pumps and hydraulic motors. Jodau Kommunal-, Umwelt- & Grünpflegetechnik Inh. Joachim Dau 24941 Flensburg, Wieselhof 29

Centrifugal pump, CRN1-3 A-CA-G-V-HQQV, 19,2m, 1,8m3/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 15,6m, Hmax: 19,2m, Q: 1,8m³/h 220 x 180 x 450mm hoch, 17kg, Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the devic ...

Manufacturer: Grundfos Number: 1 Model: NB 100-200/181 A-F-A-GQQE Built: 2008 Rated flow current: 284.3 m3/h Nominal head: 33.4 m Speed: 2950 rpm Pressure: 16 bar Temperature range: 0-90 °C Power: 37 kW The pumps never went into operation after installation and therefore virtually unused. Technical specifications and data sheets are available and will be sent on request.

CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...

oven 650 1.0x1.0x5m bogie 6 zones PLC data monitoring Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermi ...

Manufacturer: Grundfos Number: 3 Model: NBE 50-160/167 A-F-A-BAQE Built: 2008 Rated flow current: 87.4 m3/h Nominal head: 32.6 m Speed: 2900 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Furnace 1200 working temperature 100 - 1200 Celsius size 1x1x2m auto door auto bogie Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen Poreba Gurutzpe Tacchi Gem ...

Manufacturer: Grundfos Number: 3 Model: NBE 65-160/173 A-F-A-BAQE Built: 2008 Rated flow current: 126.9 m3/h Nominal head: 33.4 m Speed: 2910 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 15 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Renner compressed air tank Product description: Compressed air tank lying down Manufacturer: Renner SKU: 02280 Built: 2018 Condition: New device technical details: • Volume: 90 litres • max pressure: 11 bar • Compressed air output: G1 inches • Weight: 36 kg • powder-coated outside • Tmax: 100°C • Pieces: 4 pieces in stock High-quality compressed air tank Made in Germany (BWB container factory), with test certificate. metrics: • L x W x H: 970 x 290 x 410 mm Our price: 249,00 € (EUR) FP plus VAT from the grunow location (Brandenburg) (Changes and errors to technical data and prices reserved!)

Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible

Key data: 4

Renner piston compressor RIKO 700/270 ST KT Product name: Piston compressor Model: RIKO 700/270 ST-KT Manufacturer: RENNER Device Number: 1008851 Product number: 04837 Year of construction: 2021 Condition: As good as new technical details: Effective delivery quantity: 570 Container capacity: 270 Ltr. Intake capacity: 700 l/min Maximum pressure: 10 bar Sound pressure level LpA: 78 dB(A) Cylinders/steps: 2/2 Weight: 227 kg Temperature range: -10°C to +80°C 1 x pressure gauge tank pressure automatic pressure switch 1 x manual condensate drain by ball valve incl. refrigeration compressed air dryer RKT +0035 (refrigerant 134a) incl. automatic steam trap D03 for the compressor Stand-standing unit with rubber feet Engine data: Motor power: 4.0 KW Power supply: 400 V / 50 Hz Speed: 940 rpm Transport dimensions: L x W x H: 1,490 mm x 506 mm x 1,323  ...

DECKEL FP2A Universal toolroom milling machine CNC Control GRUNDIG Contour 3 Rigid angle table 390x620 mm X/Y/Z: 300 x 300 x 400 mm Spindle quill 80 mm Spindle speed 40…4000 rpm Feed 2-3600 mm/min SK 40 Spindle motor 1,6/2,0 kW Weight 1295 kg

Central cooling lubricant preparation, 96 KW, HL1000/10000, Knoll, used Top Used - Top condition New in our programme is a top central cooling lubricant treatment plant from Knoll. The plant was in operation only about 10 years. - Central cooling lubricant preparation of the company Knoll, - The new price of this plant is approx. € 160,000. - Central cooling lubricant preparation of the company Knoll, - Year of construction 2009 - top condition, - Total output 96 KW, - with 4 Grundfos immersion pumps as pressure pumps, a 15KW, 17m³/h, 191m, - new price of one pump € 8360,-. - incl. 4 pieces switchable Mahle double filter / separating agent filter with differential pressure sensing, - cleaning of the cooling lubricant by means of belt cleaning, - belt width 150cm - incl. integrated cooling system from Hyfra Pedia, TRK540-S-E, 27,6 KW - Data of the cooling system ...

Immersion pump, MTR 15 16/16 A-W-A-HQQV, 15 KW, 225m, 17m³/h, Grundfos, used Special price (The current market price for a new device is € 8,380 excl. VAT) If you have a VAT number, we will be happy to issue you an invoice without VAT. Used! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - 15 KW - Hmax. 225m - 17m³/h - 400/660 V - 50 Hz - 2920 rpm - Immersion pump, cooling lubricant pump - Pump stainless steel - Immersion depth 80cm - Overall dimensions 148 x 45 x 50cm - approx. 200kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. Since we know that the device works, we give you a functional warranty when you buy it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.

Description Universal tooling machine from Lid suitable for tooling, fixture construction, training as well as mold making Technical data Year of construction / YOM 1991 Speeds / Spindle 63 - 6300 rpm Steuerung Control CNC Grundig Dialog 11 Vorschübe / Feeds 2 - 3000mm/min Tisch / Table 910 x 530mm Recording / Taper ISO 40 Way / Travel (X,Y,Z) 600x500x500mm Weight /Weight ca 1830kg Changer / Tool changer No Dimensions / Dimension 2500x2000x2000mm Travel: 600x500x500mm Speed: 31.5 - 6300 rpm The machine comes from a tool making and has been regularly serviced.

Storage number: 3572 Various Manufacturer: GRUNDFOS PUMP , Type: CRK 4-100/10 A-W-A-AUUV Specifications: Rated Flow 66.7 l/min Stages impellers 12 pc Volt 380 v Depth of the pump 385 mm Engine Power 2.2 Max Print 8 Bar Weight: 29.6 kg

Storage number: 3574 miscellaneous Manufacturer: GRUNDFOS , Type: CR2-60A-A-A-AUUE specifications: Rated Flow 2.5 m3/h Volt 380 Engine Power 0.75 Max pressure 16 bar/120 C Bar Pressure height 37.7 m Weight: 15 kg

HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2,950 rpm • Power supply ...

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

Code 0733 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 4 MA S/N 2204-1372 Year 1987 Control Grundig - Contour 2 Table 800 x 460 mm Longitude ( X – axis ) table 485 mm Vertical ( Y – axis ) table 380 mm Cross ( Z – axis ) spindle 385 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 63 - 3150 rpm Feeds X-Y-Z 2 - 3000 mm/min Rapides 3 m/min Spindle motor 3,7 / 4,4 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Code 1815 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 3 A S/N 2206-0593 Year 1980 Control Grundig 2102 ( position ) Table 800 x 460 mm Longitude ( X – axis ) table 500 mm Vertical ( Y – axis ) table 400 mm Cross ( Z – axis ) spindle 300 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 25 - 2500 rpm Feeds X-Y-Z 1 – 500 mm/min Rapides 1,5 m/min Spindle motor 2,0 / 4,0 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Key data: 4200 , 2200

PUTSCH panel saw Product Name: Putsch Panel Saw Type: SVP 420 M Machine number: S-420-10.420.013 Condition : New device Technical details: • max. cutting length: 4,200 mm • max. cutting height: 2,200 mm • highest horizontal cut: 2,080 mm • max. cutting depth: 60 mm • Connection for suction: 100 mm diameter • Engine power: 5 hp/3.75 kW • Saw blade speed: 5,300 rpm • Saw blade diameter: 250 mm • Dimensions: L x W x H = 5,750 x 1,400 x 3,150 mm • Weight: approx. 1,000 kg Transport dimensions: L x W x H 1st box 1,150 x 3,100 x 1,200 mm 2nd box 5,300 x 150 x 235 mm Number of packaging units: 2 • the model series 420 is particularly suitable for continuous use in confined spaces • electr. driven, automatic shifterost • swung away center support for narrow workpieces • sliding system  ...

Code 8520 DESCRIPTION CNC bed milling machine Make DECKEL Model FP 42 A S/N 2388 – 0155 Year 1981 Control Grundig 2301 Table 1380 x550 mm Longitude ( X – axis ) table 1170 mm Vertical ( Y – axis ) table 370 mm Cross ( Z – axis ) spindle 370 mm Spindle taper 40 ISO 21 Speeds 10 - 2000 rpm 21 Feeds X-Y-Z 1 - 2500 mm/min Spindle motor 3,7 / 4,4 kW – 380 Volts Weight 3000 kgs Accessories Coolant Condition Machine is in good condition

Used Sabroe DXA26F water cooled chiller. Complete with a Sabroe / Stal S26B screw compressor, ABB M2FA 315 SMA 2 V36 elektromotor: 50 Hz - 200 kW - 2977 RPM, Alfa Laval MK15-BWFDR plate heat exchanger as condenser with a volume of 201,9 liters, plate heat exchanger as evaporator, oil seperator, oil cooler, Grundfos MG160MB2-42FF300-H3 water pump, VEM K21R 63 G 2 /2292 pump and pressure and safety switches and a Siemens Simatic HMI display. Product specifications: Brand: Sabroe Type: DXA26F Product type: Water Cooled Chiller Capacity kW: 630,0 (Capacity based on -9°C/+40°C) Capacity Tons: 179,1 Refrigerant: NH 3 (ammonia) Refrigerant Type: R717 Weight in kg: 6.545 Sizes: 4950x1800x2670 mm (LxWxH) Compressor(s) type & model: Stal S26B Display: Siemens Simatic HMI

Dosage pump,Grundfoss,DME 940,240 W,max capacity 940 l/h.

Feed pump,Grundfoss type DME 12-6AP-PP,max 12 l/h.

Feed pump,Grundfoss type DDA 7,5-16 FCM,max 7,5 l/h

Dose pump,Grundfos Alldos DMH PVC,Max capacity 24 l/h.

grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm grinding wheel diameter: 350 mm grinding wheel width: 50 mm bore: 127 mm : MK 4/5 work piece spindle speed: 50-500, stufenlos 1/min workpiece spindle - bore: 35 mm grinding head swivelling: 360 ° grinding spindle head - swivable: 12 + - ° grinding spindle speed: U/min : bis 0,05 mm/Ø : bis 0,05 mm/Ø : ±11 ° longitudinal feed of the table: 340 mm table speeds: 0-5 m/min : kg cross travel: mm : kg : mm grinding depth: mm : mm tailstock quill taper MT: 3 MK quill travel: 20 mm centre distance: 340 mm : M 48x3 total power requirement: 4,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,02 x 1,2 x 1,45 m overhauled with Tschudin geometrical protocoll. Internal grinding device is not in the offer included. Extra costs 5.000 Euro. Die Werkzeugmaschine entspricht zum derzeitigen Zeitp ...

Control: GRUNDIG DIALOG 112 Technical data Table length: 700 mm Table width: 400 mm Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 500 mm Vertical travel (z axis): 500 mm Tool changer: Number of tools: 20 Spindle nose SK: 40 Vertical spindle speeds: stepless from: 20 rpm up to: 8000 rpm Feeds: longitudinal from: 0 mm/min up to: 10000 mm/min transversal from: 0 mm/min up to: 10000 mm/min vertical from: 0 mm/min up to: 10000 mm/min Rapid traverse:: 15 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 kW Total power required: 35 kW Machine´s weight about: 6500 kg Overall dimensions machine: Length: 4000 mm Width: 3000 mm Height: 3000 mm Various accessories: Dividing attachment 4th axis

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten  ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

Control: DECKEL GRUNDIG MILL PLUS Operating hours: 11799 Technical data Table length: 1100 mm Table width: 650 mm Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 650 mm Vertical travel (z axis): 550 mm Milling head divisions (B): 90 ° Tool changer: with double gripper Number of tools: 25 Tool diameter: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 315 mm Spindle nose: ISO: 40 Spindle speeds: up to: 6300 rpm Vertical spindle speeds: Feed range: 1-15000 mm/min Rapid traverse:: 15 m/min Spindle motor: 16.2 kW Total power required: 29 kW Machine´s weight about: 5500 kg Overall dimensions machine: Length: 3100 mm Width: 2300 mm Height: 2500 mm Various accessories: Coolant system Lamp

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...

Turning diameter: 450 mm Turning length: 900 mm Turret positions: 12 CNC Brand: Siemens CNC Model: 840 D SPINNER - TC 800 110 CNC Lathe Ø 450 x 900 mm C-Axis MACH - ID 6415 Make: SPINNER Type: TC 800 110 Control: SIEMENS 840D YOP: 2018 Glass scales X/Z Axis Shop turn MAHLE Filter mist A11 Spindle nose Dust Enviro 850 – 3500 M3 Grundfuss ikz 15 Bar Max. turning Ø:450mm X-Axis:        360mm Z-Axis:        900mm Spindle bore:  110mm Speedrange:    2600Rpm ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  4Mk Length:        4.700 mm  Width:         2.000 mm  Height:        2.200 mm  Weight:        7.500 kg 

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrically overhauled with ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...

Product name: Compressor Manufacturer: Kaeser Type: EPC 340-100 Article number: 1.5746.7 Year of construction: 2011 Condition: in good used condition, checked technical details: operating pressure: 10 bar • Delivery quantity: 230 l/min (6 bar) • Speed: 1,500 rpm • Container: 90 l • Weight: 73 kg without consoles (per console 15.0 kg) • Sound pressure level dB(A): 73 Engine data: • Motor: 400 V, 1.7 kW Metrics: L x W x H: 1,120 x 350 x 910 mm Transport dimensions: • L x W x H: approx. 1,200 x 800 x 1100 mm • Transport on pallet: 1,200 x 800 mm Our price: 839,00 € (EUR) FP plus VAT from location Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

grinding diameter: 250 mm grinding length: 1000 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the serv ...