grinder centerless used for sale

Fanuc touchscreen control Nikken 4th axis Twin rotary diamond disc unit - this unit is mountednbsp;vertically with a slide-way adjustment to cater for the differing grind heights. The unit is designed to mount twin opposing discs to support dressing in both directions and provide support for the 6 thou diamond tip radius.nbsp; Longitudinal travel X-axis (autom.): 1420 mm Cross-travel Y-axis (autom.): 750 mm Dimensions of the table: 1200 x 600 mm Max dia grindingstone: 457 x 100 x 203,2 mm Spindlespeeds: 10 > 1680 rpm Motorpower: 22 kW Length: 6202 mm Depth: 3445 mm Height: 2855 mm Weight: 11,8 ton

Grinder,stainless steel,IKA type MF 10 B,with screen.

Grinder with mixer Kolbe MWE 32 , Capacity: 1300kg/h Electrical power: 6.5kW Dimensions: 80x130x130cm

Professional Coffee Grinder Voltate: 220V Power: 1.1KW Capacity: 30-40kg/h Fitness: 20-200mesh N/W: 40kg Material: SUS304 Stainless steel low noise, easy operation, finer grinding,no dust, high quality for shop, for home, for industry OBS: Product used less off 2 months, perfect condition. Product with CE certification and ISO 9001.

grinding wheel diameter: 0 mm power requirement: 0 kW following grinding spindles available: 1 Stck. Fortuna SA 85 x 272.2 R, Nr. 100 588, 2.500 U/min - à 700 Eur 1 Stck. Fortuna FAVS 100 R, 250.250, 12.000 U/min - à 700 Eur 1 Stck. SKF 1033293-1 (ex Hoefler) - à 1200 Eur 1 Stck. SKF 1033293-2 (ex Hoefler) - à 1200 Eur 1 Stck. SKF 1040329 (ex Hoefler) - à 1700 Eur The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale second hand sanding maschine steinemann. Up and down paper, super wide, 200kw. 1990 yc. Short used.

Petroncini grinder with a capacity of more than 200 kg per hour Was stored and not used for many years Unknown year Unknown condition Make your offer Can be refurbished as new with extra costs Type "The roasters agency" in the search bar to see other listings

Type 21 - ideal for processing slitting knives, circcular knives Magnetic table max inclination of table: +- 10° speed of table: 24 gt; 200 rpm Dimensions of the table: dia 300 mm Distance between table -- spindlecentre: 100 mm Max dia grindingstone: 180 > 250 mm Spindlespeeds: 2000 rpm Motorpower: 2,2 kW Length: 1480 mm Depth: 900 mm Height: 1850 mm Weight: 1400 kg

Surface grinder where the magnetic table can be tilted at an angle of -7°/0°/+7° Magnetic table of 600 mm Max horizontal stroke of grinding wheel: 610 mm Longitudinal travel X-axis (autom.): 610 mm Dimensions of the table: dia 600 mm Motorpower: 10 hp Weight: 6 ton Cooling system: yes

Mixer-grinder 130 mm Completely made of special stainless steel Holeplate diameter: 130 mm Hopper volume approx. 150 liters Mixing shaft with paddles Machine dimensions in mm: Width: 900 Depth: 1 380 Height: 1 350 Installed power: 8,6 kW Voltage: 400 V, 50 Hz

Mixer-grinder 200 mm 200 mm hole plate diameter Almost completely made of solid stainless steel 2-speed working worm 1-speed mixing paddle motor, approx. 1,5 kW with 2 mixing arms, independent of working worm, with automatic drive Hopper capacity approx. 300 litres (mixing capacity approx. 150 kg) Integrated lifting device, for standard meat bins Machine dimensions in cm: Width: 265,0 Depth: 175,0 Height: 190,0 Power of the motor: 37,0 kW Installed power: 40,0 kW Voltage: 380 V, 50 Hz Machine weight: approx. 1200 kg

Mixer-grinder 130 mm Type: Seydelmann ME 130 Completely made of special stainless steel Hole plate diameter: 130 mm Hopper capacity: about 170 l Throughput depending on material type, speed, cutting set up to 3000 kg/h One-speed mixing mechanism 2-speed working worm Machine dimensions in cm: Width: 90,0 Depth: 120,0 Height: 136,0 Installed power: 18 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg

vertical adjustment: 150 mm working area: 400 x 150 mm 2825 rpm Dia ceramic grindstone: 175 mm Motorpower: 2,2 kW Length : 800 mm Depth: 520 mm Height: 1300 mm Weight: 160 kg

Description Feeding mouth size: 270 x 340 mm Cutting chamber size: 270 x 300 mm Engine power: 4 Kw Rotating Blades: 30 Fixed blades: 2 Grid Hole Size: 6 mm Material extraction: motorized screw

Technical details Manufacturer: GEA Niro Soavi Model: Ariete NS3110H Type: Piston homogenizer Viscosity : < 500 cP Maximum particle size: up to 500 microns Operating temperature: < 90?C Execution : Sanitary / aseptic Max. capacity: approx. 15,000 L/h (variable capacity from 5,500 to 15,000 L/h) Flow rate: variable / fixed / multiple Maximum working pressure: 200 bar Maximum back pressure: 5 bar Minimum in feed pressure range: 4 to 6 bar Motor power (supply required): 110 kW Power supply: 3 ph / 400 V / 50 Hz Water supply: min 2 bar Air supply : min 6 bar Product temperature : < 90?C Cleaning temperature : < 140?C Cleaning cycle : 30 min Sterilisation temperature : 140?C Number of stages / homogenisation level: 2 Plunger diameter: 85 mm Plunger stroke. Piston stroke : 100 mm Options added by the manufacture ...

Description Inlet size: 230 mm x 295 mm Cutting Chamber Size: 150 mm x 300 mm Motor power: 4 kW Rotating Blades: 12 Fixed blades: 2 Grid hole size: 5 mm Material extraction: collection drawer with hole for suction. New rotary blades.

Description Inlet size: 430 mm x 45 mm Cutting Chamber Width: 450 mm Processing thickness: 3;5;8;10 mm Engine power: 11 kW Rotating Blades: 16 Fixed blades: 2

Description Inlet size: 430 mm x 45 mm Cutting Chamber Width: 450 mm Processing thickness: 3;5;8;10 mm Engine power: 11 kW Rotating Blades: 16 Fixed blades: 2

Description Inlet size: 450mm x 350mm Cutting Chamber Size: 450mm x 380mm Engine power: 18.5 kW Rotating blades: 3 Fixed blades: 2 Grid hole size: 8 mm Drawer Material: Drawer New grille and belts, ground blades New grille and belts, ground blades

Max. width of cutting: 530 mm The temperature of the meat block: up to -25 C The Control panel mounted on the machine Installed power: 32 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 200 Length: 190 Height: 210 Delivery time: 30 working days after advanced payment

Description Inlet size: 210 x 600 mm Cutting Chamber Size: 150 x 195 mm Engine power: 2.2 kW Rotating blades: 3 Fixed blades: 2 Grid hole size: 5 mm Extraction Material: container with hole for suction

Description Feeding Mouth Size: 400 x 190 mm Cutting Chamber Size: 160x150 mm Motor power: 1,5 Kw Rotating blades: 2 Fixed blades: 2 Grid Hole Size: 5 mm Extraction Material: box with suction hole with auger effort control

Description Feeding Mouth Diameter: 400 x 200 mm Cutting Chamber Diameter: 150 x 200 mm Motor power: 2.2 kw Rotating blades: 3 Fixed blades: 2 Grid Hole Size: 8 mm

Description Feeding Mouth Diameter: 400 x 200 mm Cutting Chamber Diameter: 150 x 150 mm Motor power: 1.5 kw Rotating blades: 3 Fixed blades: 2 Grid Hole Size: 6 mm

Description Feeding Mouth Diameter: 400 x 200 mm Cutting Chamber Diameter: 150 x 200 mm Motor power: 2.2 kw Rotating blades: 3 Fixed blades: 2 Grid Hole Size: 6 mm

Description Feeding Mouth Diameter: 600 x 300 mm Cutting Chamber Diameter: 160 x 155 mm Rotating blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Extraction Material: standard collection drawer

Description Tria granulator complete with blower for material extraction and dust cyclone Feeding Mouth Diameter: 470 x 435 mm Cutting Chamber Diameter: 470 x 250 mm Motor Power: 7.5 Kw Rotating blades: 6 Fixed blades: 2 Grid Hole Size: 9 mm Material Extraction: By Blower NEW BLADES

Description Power inlet: 210 x 135 mm Granulation Chamber: 150 x 90 mm Rotating blades: 3 Fixed blades: 2 Grille Holes: 5.5 mm

Description feeding spout: 400 x 200 mm granulation chamber: 400 x 200 mm motor power: 4 kW rotating blades: 3 fixed blades: 2 grid holes: 5 mm material extraction: drawer with hole for aspirator or blower Granulator with film group.

Description TRAILER GROUP max speed: 55 m / min roller diameter: 82 mm roll width: 400 mm roller opening: 6 mm motor power: 0.25 kW

Rear grinder JUNG type HA 20 Device no.: 3344 Profile depth: max. 15 mm Angle adjustment: 0 to 2 Magnetic plate: 115 x 115 mm Clamping area: 110 x 75 mm Height magnetic plate: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Current consumption: 1 Ampere Operating voltage: 24 volts, DC voltage (V/DC) - mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg good condition Suitable in cutting tool mould making for conical back-ground cutting plates or mould inserts.; used

Description POWER SUPPLY: 550 x 540 mm GRANULATION ROOM: 160 x 100 mm ENGINE POWER: 1.5 kW ROLLING LAMPS: 2 FIXED LAMPS: 2 GRAY HOLES: 5 mm PRODUCTION: / MATERIAL EXTRACTION: material extraction with drop in drawer Granulator with forced feed through auger, screw power 0.75 kW

Grinding diameter: 630 mm Grinding length: 4000 mm Workpiece weight: 900 kg CNC Brand: Siemens CNC Model: SIEMENS 840D 4 Axis controlled X, U, Z and C Axis Large steady rest package 6 units Concave grinding Covex grinding Dressing system Rebuild by Primoteq Centre height:           315mm Grinding Ø:              630mm Grinding length:         4000mm Grinding stone dimensions:710 x 80 x 305mm Table inclasement:       -5 to + 5° Tailstock:               6Mk Coolant system:          Yes Filtration:              Yes Length:                  12000mm Width:                  &nb ...

Description POWER SUPPLY: 370 x 300 mm GRANULATION ROOM: 250 x 270 mm ENGINE POWER: 14 kW ROLLING LAMPS: 3 FIXED LAMPS: 2 GRAY HOLES: 6 mm PRODUCTION: / MATERIAL EXTRACTION: material extraction via blower, blower 0.75 kW Granulator with forced feed through auger

Description POWER SUPPLY: 712x410 GRANULATION ROOM: 710x430 ENGINE POWER: 22 kW ROLLING LAMPS: 3 + 3 FIXED LAMPS: 2 + 2 GRAY HOLES: 3 mm PRODUCTION: 490 kg / h (with 8 mm grid) MATERIAL EXTRACTION: Extraction of material by fall with predisposition for side aspirator

Grinding length: 1250 mm Grinding width: 625 mm Grinding height: 710 mm Wheel diameter: 120 mm Spindle power: 30 kW X - Travel1250 mm Y - Travel625 mm Z - Travel710 mm Table Length1250 mm Table Width1250 mm Table load2000 Power48 kW Speeds3,15 - 31,4 Rpm

Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 500 mm Wheel diameter: 400 mm Spindle power: 16 kW X - Travel:              1000mm Y - Travel:              500mm Z - Travel:              500mm Table Length:            1000mm Table Width:             500mm Table load:              500 Feed rate X-Axis:        28000mm/min. Feed rate Z-Axis:        1000mm/min. Grinding stone dimensions:400 x 100 x 127mm Power:                   16kW Speeds:                  1400Rpm Feed rate Y-Axis:        10000mm/min. Lengt ...

Description Granulator complete with blower Mouth size: 300x190 mm with feeding coil Cutting chamber size: 120x120 mm Grid size holes: 6 mm Engine power: 1.1 kW,

Description Granulator complete with blower Mouth size: 300x190 mm with feeding coil Cutting chamber size: 120x120 mm Grid size holes: 6 mm Engine power: 1.1 kW, Blowing power: 0.25 kW

Description Feeding mouth size: 420 mm x 160 mm Cutting Chamber Size: 430 mm x 180 mm Engine power: 1.5 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Approximate production: 20 - 400 Kg/h Material Extraction: Drawer with extraction hole Machine never used, in like new condition

Description Feeding mouth size: 420 x 160 mm Cutting chamber size: 430 x 180 mm Engine power: 1.5 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Production: 20-400 Kg/h Material extraction: drawer with extraction hole Machine never used, in like new condition

Grinding diameter: 600 mm Grinding length: 5000 mm Workpiece weight: 5000 kg Cylicrical grinder with table inclesment C-Type open steady rest Work load up to 5000 Kg Table speed 1 - 6 M/min Headstock 120 Rp&nbsp; Centre height:           310mm Grinding Ø:              600mm Grinding length:         5000mm Grinding stone dimensions:750 x 100mm Table inclasement:       0 - 6° Length:                  9900mm Width:                   2300mm Height:                  2200mm Weight:                  19000kg

2 Rolls coffee grinder with an output between 600kg and 1 ton per hour depending on the ground size Spare sharpened set of rolls included

Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Sanding pad for belt sanding machine Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Overall dimensions mm 330 x 150 x 100 h Weight kg 4

Grinding length: 900 mm Grinding width: 360 mm Grinding height: 450 mm Wheel diameter: 300 mm Spindle power: 4 kW CNC Brand: Siemens Magnet table 800 x 400 mm Min. distance table to spindle center 125 mm Max. distance table to spindle center 575 mm Feed rate override all axis Vario speed grionding spindel drive Plunge cut grinding Parametic grinding and dressing Grinding intermittent & continious cross feed Coolant tank & filtration system Specifications Metric US Standard X - Travel900 mm Y - Travel450 mm Z - Travel360 mm Table Length1200 mm Table Width400 mm Table load700 Feed rate X-Axis30.000 mm/min. Feed rate Z-Axis400 mm/min. Grinding stone dimensions300 x 50 x 76,2 mm Feed rate Y-Axis4000 mm/min

Description Feeding mouth size: 480 x 260 mm Cutting Chamber Size: 480 x 230 mm Engine power: 11 kw Rotating Blades: 12 Fixed blades: 2 Grid Hole Size: 8 mm Production: 150 Kg/h Material extraction: integrated suction with cyclonic filter

Description Feeding mouth size: 210 mm x 415 mm Cutting Chamber Size: 200 mm x 420 mm Engine power: 3 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Approximate production: 50 - 80 Kg/h Material Extraction: Collection drawer with suction hole.

GEA PowerGrind Grinder 280 Robust industrial grinder Suitable for coarse and fine grinding of fresh and frozen meat. Applications include ground meat for formed products, sausages, minced meat, pet food and ground frozen vegetables.

Description Feeding mouth size: 210 mm x 415 mm Cutting Chamber Size: 200 mm x 420 mm Engine power: 3 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Approximate production: 50 - 80 Kg/h Material Extraction: Collection drawer with suction hole.

Description Feeding mouth size: 210 mm x 415 mm Cutting Chamber Size: 200 mm x 420 mm Engine power: 3 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Approximate production: 50 - 80 Kg/h Material Extraction: Collection drawer with suction hole.