We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,372 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
This Gildemeister Sprint 65 linear Lathe was manufactured in the year 2008 in Italy and has 22399 production hours. It is equipped with a DMG FANUC 310 i control unit. The machine has a spindle speed of 5000 rpm.
used
This GILDEMEISTER CTX 420 V6 linear Lathe was made in 2007 and has 10282 production hours, of which 6954 are working hours. It is controlled by a SIEMENS 840D POWERLINE control unit. The machine has a spindle speed of 6000 rpm.
used
This Gildemeister sprint 65 linear Lathe was manufactured in the year 2007 in Italy. It is equipped with a DMG FANUC 310 i control unit. The machine has a spindle speed of 5000 rpm.
used
Turning diameter: 290 mm Turning length: 640 mm Turret positions: 12 CNC Brand: _Unknown / Other Make Gildemeister Type CTX 400 E Year 1996 CNC Lathe with revolver Centre height (mm)Swing = 290 Center distance (mm)Length = 640 Spindle bore Bore = 72 Speeds 5000 Rpm Revolver 12 Positions Collet device + inserts
used
This 3-axis GILDEMEISTER CTX 310 lathe was manufactured in 2003. It features a Heidenhain iT numerical control with DIN PLUS, TURN PLUS programming software, and a coolant lubricant pump. The lathe has a spindle bore of 68.5 mm and offers a speed range of up to 5000 rpm. It also includes 12 tool stations with a maximum torque of 86 Nm. The machine dimensions, including the chip conveyor, are 4173 x 1594 x 1730 mm. Reach out for further details regarding this horizontal lathe.
used
turning diameter: max. 42 mm turning length: ca. 120 mm control: 160i-TB Fanuc Main spindle:: max. usable bar diameter: 42 mm Max. speed main spindle: 6.500 min/-1 power capacity - main spindel: 7,5 / 5,5 kW C-Axis: 0,001 ° Subspindle:: max. usable bar diameter: 42 mm Max. Speed Subspindle: 6.500 min/-1 power capacity - Sub spindle: 7,5 / 5,5 kW C-Axis: 0,001 ° slide I:: x-axis: 65 mm y-axis: 350 mm z-axis: 120 mm rapid traverse: 30 m/min Accelaration: 5/10 m/s² feed power: max. 350 daN Tool Slide I:: number of toolpositions: 10 (6+4) pos. Number of fixed tools: 6 pos. Number of driven toolspositions: 4 pos. collets: ESX 20 slide II:: x-axis: 265 mm z-axis: 320 mm rapid traverse: X: 18 / Z: 30 m/min Accelaration: 5 m/s² feed power: max. 350 daN Slide Y2:: y-axis: 326 mm rapid traverse: 30 m/min Accelaration: 5 m/s² feed power: max. 350 daN Tool Slide II:: number of toolpositi ...
used
tool taper: 40 shaft cross cut:40 appr. 40 pieces axial driven tool taper with various cutters Used with Gildemeister GDM CNC lathe Sale as complete package or single, min. 5 pieces Price offered for complete package
used
Inv. Num. : 6136 Type: CTX alpha 5000 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Operating hours: 22803 h Switching-on hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Loader CNC Spacesaver SS 2500 (2018)
used
Floor No.: 3711 CNC LATHE Manuf.: GILDEMEISTER , Type: GDM 90 - MC Serial No.: 4.8164, Build: 1992 Specifications: Turning diameter 240 mm dia. Turning Length 500 mm Distance between Centres 1250 mm Main motor power 50 kw Main Spindle speed range 4000 rpm C Axis - Mainspindle Stroke 0.001 degree X Axis Stroke 215 mm Z Axis Stroke 850 mm Turret 1 with 12 Stations Turret 2 with 12 Stations Sub Spindle C Axis – Sub spindle Stroke 0.001 degree Accessories: Hydr. Chuck Mainspindle 300 mm dia Hydr. Chuck Supspindle 250 mm dia Various toolposts. Chip conveyor. Coolant. Gantry loader Length: 4850 mm + portal , Height: 2000 mm, Width: 3000 mm, Weight: 10.200 kg
used
Stock number: 3724 CNC LATHE Manufacturer: GILDEMEISTER, Type: GDM 42 / 2A Machine NO.: 45881, Year of construction: 1989 Specifications: circulation diameter 185 / 290 mm dia. max. rotation. over bed 550 mm dia. Main engine power 22/29 kw Main spindle speed range 40-6300 - 2 step rpm Bore through drawing tube 42 mm dia. X axis movement 190 mm Z Ash movement 450 mm Tool turret with 12 VDI 3425 - 40 mm stations Total power 42.5 kW Total power consumption 45 kva Accessories: Hydraulic main centering chuck 160 mm dia. Chip conveying. Cooling water system. Length: 3300 mm, Høhe: 1800 mm, Width: 2350 mm , Weight: 5300 kg
used
CNC lathe Manufacturer Gildemeister Type NEF CT 40 Year of construction Control EPL 2 Tailstock Center width approx. 600mm Turning diameter 400mm 12-speed revolver VDI 30 incl. div steel holder and lathe chuck Machine still rotates to 0.001mm accuracy, main drive motor renewed 2 years ago.
used
CNC control, numeric control, made of MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot M Year of construction approx. 1980 Rack with 20 module slots - 12 built-in modules Built-in modules : 1 piece 0.651.406-19.3 UNI 030655-1017 Universal Interface 1 piece 0.650.847-56.1 O32 output card 2 pieces 0.651.708-57.3 I32 032937-1017 Input card 1 piece 0.652.138-36.1 APC 1 piece 0.651.928-25.3 LAB Position control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY 030645-1017 Serial interface 1 piece 0.651.974-23.2 ABS termination card 1 piece 0.651.298-18.3 CPU 030649-101 7 CPU dimensions W x H x D 480x 260 x 220 mm Weight 7 kg Individual cards on request.; used
used
Hydraulic self-centering bezel, Luenette, Lynette SMW AUTOBLOK Hydraulic bezel with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER Lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Bezel base: 245 x 240 mm Type: fixed - 3 pieces roller bearing 35 mm- roll width 18 mm - hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Net weight: 65 kg good condition; used
used
6 spindle bar automatic Gildemeister GM32, 5x axial spindle (pos. 1, 2, 3, 4, 5), pick-up spindle pos. 6, double slide pos. 6, gruppo frizioni per filettare, 4x axial drive (pos. 1, 2, 4, 5), compound slide with drive pos. 5, conveyor belt for finished parts, chip conveyor, worm type, Number of spindles: 6, Max bar diameter [mm]: 32, Auto bar loader: Pietro Cucchi
used
6 spindle bar automatic Gildemeister GS20, compound slide with drive in pos. 1, compound slide with drive in pos. 2, compound slide in pos. 4, compound slide in pos. 5, 4x axial spindle (pos. 1, 2, 4, 5), rotating milling device in pos. 3, pick-up spindle pos. 6, swing rear machining arm drive in pos. 3, swing rear machining arm drive in pos. 6, swarf coneveyor, worm type, set of tool holders, set of cams, Number of spindles: 6, Max bar diameter [mm]: 20, Max bar feed [mm]: 100, Spindle speed [rpm]: 214 - 5.168, Spindle motor [kW]: 11, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Pietro Cucchi
used
turning diameter: max. 320 mm turning length: 450 mm control: 32 i S Fanuc centre height: 190 mm turning diameter over bed: 320 mm turning dia. over face-slide: 260 mm Main spindle:: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 11 / 7,5 kW max. Torque: 115 / 86 Nm usable bar diameter: max. ( 52 ) mm spindle bore: 68,5 mm spindle diameter in front bearing: 100 mm C-Axis: 360 x 0,01 ° axis stroke:: travel -x axis: 160 mm travel -z axis: 450 mm turret:: number of toolpositions: 12 pos. tool taper: VDI 30 Shank diameter: 20 x 20 mm Number of driven toolspositions: 6 pos. max. speed driven tool stations: 5.000 min/-1 power capacity - driven tool-stations: 3,7 kW Tailstock:: tailstock adjustment: 400 mm intake pressure max.: 4.000 N feeds:: rapid traverse: X: 20 / Z: 30 m/min Feed force ( X / Z ): 4,5 kN total power requirement: 24 kVA weight of th ...
used
Gildemeister GM 16-6AC, 4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5, 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5, threading device, 1x threading spindle, pick-up spindle, broaching device, set of cams, set of collets, bar-loader Cucchi Giovanni (YOM 2004), Working hours: 13.600
used
DMG Gildemeister CTX 320 Linear V6 CNC lathe with Y-axis, driven tools and second spindle CNC control Siemens 840D Powerline Turning diameter 240 mm Spindle bore diameter 51 mm Spindle speed 6000 rpm Spindle motor 20/16 kW X-axis travel 141 mm Y-axis travel: 32 mm Z-axis travel 450 mm W-axis travel 380 mm Minimum indexing of the main spindle of the C-axis 0.001° minimum indexing of the C-axis auxiliary spindle 0.001° Number of tools on turret 12 Number of driven tools 12 Spindle speed driven tools 5000 rpm Tool holder DIN 69880-30 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.
used
turning diameter: 210 mm turning length: 580 mm control: 840 D Siemens centre height: 190 mm turning diameter over bed: 330 mm turning dia. over face-slide: 260 mm Main spindle:: turning speed range - main spindle: max. 4.000 min/-1 power capacity - main spindel: 10 / 7,5 kW max. Torque: 115 / 86 Nm spindle bore: 68,5 mm max. usable bar diameter: 51 mm C - Axis: 0,001 ° axis stroke:: travel -x axis: 185 mm travel -z axis: 455 mm turret:: number of toolpositions: 12 pos. tool taper: VDI 30 Driven Tool Stations:: 6 pos. Tailstock:: tailstock adjustment: 400 mm intake pressure max.: 4.000 N feeds:: rapid traverse: X: 20 / Z: 30 m/min Feed force ( X / Y / Z ): 4,5 kN total power requirement: 21 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 8,0 x 2,2 x 2,0 m Documents: Chip conveyor: Coolantsystem: Tailstock: parts catcher: C-axis: driven tool stations: Signa ...
used
Gildemeister CTX Beta 500, Year of construction 2009, Control Heidenhain IT Plus, Travel X/Z 300/550 mm, Y axis +/- 60 mm, Main spindle up to 5,000 rpm, C axis, rods Ø up to 77 mm, 16-speed revolver, VDI 30, Addressed. Tools Interface Bar Feeder, programmable tailstock, Chip conveyor, three-jaw chuck Ø 250mm, 7,200 spindle hours, Accessories
used
CNC multi spindle bar automatic, Gildemeister GMC 35 ISM, - 6 integretat spidles with C-axis, - 5 compound slides pos. 1; 2; 3, 4; 5;, - intipendend feed for central block, - douple slide in pos. 6, - pick-up spindle in pos. 6, - 5 frontal spindles, rotating, with internal coolant supply, ISO 40, - swarf conveyor, - Fire fihthing system CO2, - ARTIS tool breakage control system, Stangenlademagazin :, Cucchi Pietro PB 41 Compact, Country of origin: Italy, Control: Siemens 840D, Operating hours: 56.000, Number of spindles: 6, Max bar diameter [mm]: 35, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 21, Total power requirement [kVA]: 107, Auto bar loader: Cucchi Pietro PB 41 Compact
used
Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Gildemeister lathe -Drive: 1.1 kw -Speed: 1410 rpm -Max. Pressure: 25 bar -Liter output: l/min -Filter -Hydraulic tank -Dimensions: 500/680/H660 mm -Weight: 98 kg
used
Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg
used
CNC bar lathe Gildemeister CTX 300 with Y axis Fanuc CNC model 16i - T Main spindle nose ASA 6 Main spindle power 12 Kw Main spindle hole 60 mm Turning diameter 230 mm Turning length 500 mm Number of RPM main spindle 5000 Number of tool holder turrets 1 Number of tools 12 Number of live tools 12 tool attachment type VDI 30 X-axis travel 160 mm Y axis travel + - 32 mm Z axis travel 500 mm Rapid feeds X Y Z 24 m/min Sub-spindle yes ASA 5 spindle nose Sub-spindle RPM 5000 / 9 Kw Sub-spindle hole 30 mm Iemca bar loader Swarf conveyor 2002 The machine can be seen working in our warehouse in Gussago BS.
used
6 spindle bar automatic Gildemeister GM32, 5x axial spindle (pos. 1, 2, 3, 4, 5), pick-up spindle pos. 6, double slide pos. 6, gruppo frizioni per filettare, 4x axial drive (pos. 1, 2, 4, 5), conveyor belt for finished parts, chip conveyor, worm type, Number of spindles: 6, Max bar diameter [mm]: 32, Auto bar loader: Pietro Cucchi
used
Gildemeister GD 16-5 - Top condition!, - Synchronized Guide bush, - 3off life tools slide 1, - rear working, - swarf conveyeor, - oil mist filter, - bar loader Iemca Smart 316
used
Gildemeister GMC20 ONE, Options / Accessories, - 5 Cross-slides pos. 1;2;3;4;5, - 2 Radial slides pos. 6 for cutting and rear-working operations, - 1 C-axis for the pick up spindle, - Pneumatic work-piece unloading chute for pos. 6, - Work-piece conveyor belt, - Swarf conveyor, worm type, - 5x Frontal tool spindle, fix, - Pick- up spindle in pos. 6, - High pressure coolant device 70l / 50bar, Country of origin: Italy, Control: Siemens 840D, Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 9,1, Z - travel [mm]: 70 / 140, Total power requirement [kVA]: 98, Weight of the machine ca. [kg]: 9.800, Auto bar loader: Cucchi Giovanni DBM.625
used
Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of construction: 2005 Spindle bore: 70 mm Center width: 1000 mm Circulation O above bed : 500 mm Circulation O over face slide: 290 mm Center height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 30 VDI 30 tool holders 2 driven tools VDI 30 1 collet chuck Coolant system 3 jaw chuck Röhm 0 250 mm 19 set of soft jaw inserts ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions
used
Universal lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE CONTROLLER (SIMATIC PANEL TOUCH SCREEN) Year of construction: 2001 Spindle bore: 52 mm Center width: 750 mm Circulation O above bed : 320 mm Circulation O over face slide: 150 mm Flat travel : 185 mm Speed range: 14 – 3550 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck 0 200 mm Tailstock with retractable quill Chip pan Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN VERY GOOD CONDITION
used
Key data: 205 mm, 650 mm
For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...
used
Gildemeister GMX 250 Linear The GMX 250 Linear is a turning-milling centre for producing rotational parts, type flange. It machines the complete part in one run without the operator interfering from a semi-finished part, for instance a cast part. In fact, from both sides using two clampers. The machine is able to turn, mill, drill, produce threads etc. Operating system – Heidenhain plus it with turnplus Working range Maximum turnable diameter 640 mm Maximum turnable diameter of the counter spindle 400 mm Distance between the spindles 1,500 mm Turntable length 1,185 mm Main drive Maximum output 28 kW Maximum speed 5,000 min-1 Maximum torque 320 Nm Tool magazine Number of tools in the magazine 46 Number of tools in the turret 12 Tool interface HSK 63, VDI 40 Main drive Maximum output 28 kW Maximum speed 5,000 min-1 Maximum torque 320 Nm
used
Key data: 520 mm, 625 mm, 5000 1/min
Manufacturer: Gildemeister Model CTX 420 V 3 Year of construction 2004 Condition Used Control Heidenhain iT Specifications Circulation diameter 565 mm Turning length 625 mm X-travel 260 mm Speed range - main spindle 25 - 5000 rpm Drive power - main spindle 25 kW Max. torque 270 Nm Spindle nose 170h5 Rod diameter 65 mm C-axis 0.001° Revolver Stations 12 pos. Tool holder VDI 40 Driven tool stations 12 pos. Speed driven tools 4500 rpm Drive power driven tools 12 kW Max. torque 27 Nm Tailstock mount MK 4 Rapid traverse X / Z 60 / 45 m/min Total power requirement 55 kVA Machine weight approx. 6.0 t Space requirement approx. (without bar feeder) 3495 x 2484 x 1885 mm Accessories/Equipment Bar feeder 3200 mm Iemca Master 880 MP-E Conveyor Parts catcher Conveyor belt C-axis Driven tools Collet Chuck Hainbuch 3 Röhm jaw chuck Too ...
used
Key data: 225 mm, 640 mm, 4000 1/min
1 pc used CNC lathe Make: Gildemeister Model : CT 40 Control: EPL 2 Built in 1987 Switch-on hours: 2250 hours Specifications Circulation over bed 400 mm Turning length 640 mm Turning diameter 225 mm Spindle size, flat flange 140h5 Spindle bore 72 mm Drive power 11 kW Speed range, infinitely variable 20-4000 min Z-rapid traverse/feed speed 10/5 m/min. X-rapid traverse/feed speed 10/5 m/min. Recording VDI 30 Number of tool positions 12 Length x Width x Height 3260x1720x1650 mm Machine weight 3400 kg Accessories: Hand chuck Documentation
used
Key data: 320 mm, 750 mm
Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 5 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation
used
Type: Sprint 20 linear Parameters: Manufacturer: Gildemeister Year of production / SO / GO: 2006 / - / - Description: The machine is in good technical condition. Sold including bar feeder: 3m LNS express-220 Linear axis Z1: 80mm Linear axis X1: 35mm Linear axis Y1: 240mm Linear axis X2: 230mm Max. turning diameter: 20mm Tool body diameter: 20mm Number of fixed tools for external machining: 6 Machine dimensions: 2275 x 1300 x 1760mm Machine weight: 2600kg Upon agreement, the possibility of a tour in progress.
used
Cycle-controlled lathe GILDEMEISTER NEF 720 With control MANUAL PLUS 4110 Year of construction: 2001 Spindle bore: 92 mm Center width: 1500 mm Circulation O above bed : 710 mm Circulation O over face slide: 410 mm Center height: 350 mm Speed range: 36 – 1800 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck Forkhardt 0 315 mm ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions
used
turning length: 600 mm max. turning diameter: 320 mm swing diameter above cross guideway: 365 mm control: CNC Pilot 4290 Heidenhain Main spindle:: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 28 / 21 kW max. Torque: 320 / 240 Nm spindle nose: 170h5 chucking diameter: 215 mm spindle diameter in front bearing: 130 mm spindle bore: 87 mm max. bar capacity: 65 mm c-axis: turret:: number of toolpositions: 12 pos. tool taper: VDI 30 Driven Tool Stations:: Number of driven toolspositions: 12 pos. tool spindle speed range: max. 4.500 min/-1 power capacity driven tool-stations: 3,1 kW max. Torque: 10 Nm axis stroke:: x-travel: 250 mm z-travel: 635 mm Tailstock:: tailstock: 580 mm taper of center: MK 4 diameter of quill: 120 mm quill stroke: 150 mm feeds:: rapid traverse: X: 24 / Z: 30 m/min total power requirement: 44 kVA weight of the machine ca.: 5 ...
used
CNC lathe Manufacturer: Gildemeister Type: CTX 620 Linear V3 Year of construction: 2007 Control: Heidenhain IT Circulation diameter: 800 mm Drive power: 40%/100% ED 43/33 kW Speed range from – to: 20-2500 rpm Weight approx.: 9600 Kg Equipment: Axes: X,Z,C axis Powered Tools: Yes Tool carrier: 12-speed turret Tailstock: Yes Quill Stroke Automatic: Yes Quill mount: MK5 Chip Conveyor: Yes Very good condition. Errors excepted
used
turning length: 1.000 mm swing diameter max. over bed cover: 600 mm swing diameter above cross guideway: 420 mm control: Eltropilot Heidenhain travel -x axis: 275 mm travel -z axis: 1.065 mm Main spindle:: turning speed range - main spindle: 16 - 3.200 min/-1 power capacity - main spindel: 27 kW max. Torque: 800 Nm spindle diameter in front bearing: 120 mm spindle bore: 85 mm chucking diameter: 260 mm spindle head: 220H5 turret:: number of toolpositions: 12 pos. Shank diameter: 40 mm turret change time: 0,8 sec. Tailstock:: diameter of quill: 100 mm quill stroke: 120 mm taper of center: MK 5 pressure center sleeve: max. 950 daN feeds:: rapid traverse: X: 10 / Z: 15 m/min Feed force: X: 500 / Z: 1.000 daN total power requirement: 52 kVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: 5,5 x 2,5 x 2,1 m Documents: Chip conveyor: Coolantsystem: Tailstock: hydraulic sy ...
used
CNC lathe Manufacturer: Gildemeister Type: CTX 410 V3 Year of construction: 2006 Control: Heidenhain IT Circumferential diameter: 505 mm Drive power: 40%/100% ED 28/21 kW Speed range from – to: 25-5000 rpm Weight approx.: 5600 Kg Equipment: Axes: X,Z,C axis Tool carrier: 12-speed turret Tailstock: Yes Quill Stroke Automatic: Yes Quill mounting: MK4 Chip Conveyor: Yes Very good condition. Errors excepted
used
max. turning diameter: 33 mm max. turning speeds: 8.000 U/min Number of axles: 8 St. turning speed rotating tools: 6.000 U/min control: FANUC Dimensions (L x W x H): 4.020 x 1.850 x 1.925 mm machine weight ab.: 4.200 kg CNC Turning- and Milling Center | GILDEMEISTER - SPRINT 32 linear equipped with C-axis for mainspindle and counter-spindle and bar feeder Iemca Further information: - collet holder for main and pick up spindle - 5 position 16x16 toolholder for slide 1 - 3 driven tools on slide 1 with spindles ESX16 - drive for rotating tools slide 2 - 4-pos.tool holder diam.32mm for slide - 2-chip conveyor h=1100 mm - pneum. ejector and unloading system with belt -pneum. - cleaning system for counterspindle¬ - collet - Mechanical preparation for oil mist filter - electr. and software preparation for bar loader – synchronization between main and counter spindle - constant cutting spee ...
used
Key data: 324 mm, 600 mm
CNC lathe GILDEMEISTER CTX 420 linear V 3 With control Heidenhain ELTROPILOT 4290 Year of construction: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circulation diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations 50 tool holders VDI 40 5 driven tools VDI 40 1 pc Hydraulic Lynette Tailstock with quill Conveyor Hydraulic jaw chuck Forkardt 0 250 mm Foot switch for jaw chuck + tailstock adjustment Coolant device 210 l ( 20 l/min ) 6 bar Operating instructions
used
This GILDEMEISTER CTX 310 Lathe was made in 2003. It is equipped with a HEIDENHAIN DataPilot 4290 control unit. The machine has a spindle speed of 5000 rpm. Its technical condition is normal with an accuracy of 0.01 mm. Throughout the years it was continuously maintained. In 2022, the main drive card and main engine were replaced. In December 2022, the main spindle bearings were exchanged. The replacement was made with new parts. The basic machine is equipped with a hydraulic chuck. Full documentation is available.
used
Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
used
Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
used
Gildemeister CTX 410 Year of construction: 2004 Controls: Heidenhain CNC lathe Travel: x-travel 250 mm z-travel 635 mm Max. turning length: 600 mm Circulation diameter over bed: 505 mm Circulation diameter over face slide: 365 mm Spindle bore: 87 mm Max. chuck diameter: 250 mm Max. torque: 320 Nm Max. tailstock displacement by hand/self-acting: 580 mm Tailstock mount/stroke: MK4/580 mm Area requirement (LxWxH): 6.5 m x 4.0 m x 1.8 m Weight: 4500 kg
used
turning diameter: max. 42 mm turning length: ca. 120 mm control: 160i Fanuc Main spindle:: max. usable bar diameter: 42 mm Max. speed main spindle: 6.500 min/-1 power capacity - main spindel: 5,5 kW C-Axis: 360 ° Subspindle:: max. usable bar diameter: 42 mm Max. Speed Subspindle: 6.500 min/-1 power capacity - Sub spindle: 3,7 kW C-Axis: 360 ° slide I:: x-axis: 65 mm y-axis: 350 mm z-axis: 120 mm rapid traverse: 30 m/min Accelaration: 5/10 m/s² feed power: max. 350 daN Tool Slide I:: number of toolpositions: 13 ((6+3)+4) pos. Number of fixed tools: 6+3 pos. Number of driven toolspositions: 4 pos. collets: ESX 20 slide II:: x-axis: 265 mm z-axis: 320 mm rapid traverse: X: 18 / Z: 30 m/min Accelaration: 5 m/s² feed power: max. 350 daN Slide Y2:: y-axis: 326 mm rapid traverse: 30 m/min Accelaration: 5 m/s² feed power: max. 350 daN Tool Slide II:: number of toolpositions: 11 ((4+3 ...
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 76500 Technical data Number of spindles: 2 Number of revolvers: 2 Swing over bed: 240 mm Spindle hole: 65 / 42 mm Turning diameter: 200 mm Bar diameter: 65 / 42 mm Clamping chuck diameter: 200 mm Turret carriage: Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Transversal travel (y-axis): +/-40 mm Carriage:: 2 Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Turret carriage: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 40-4000 rpm Main spindle: C axis (spindle,resolution): 0.025 ° Spindle speeds: stepless from: 25 rpm up to: 5000 rpm Torque max.: 200 Nm Back spi ...
used
Control: SIEMENS SINUMERIK 840 D Operating hours: 29500 Technical data Number of axis total: 4 Number of spindles: 2 Distance spindle nose: 580 mm Swing over cross-slide: 100 mm Swing over bed: 145 mm Spindle hole: 50 mm Turning diameter: 100 mm Bar diameter with collet: 36 mm Clamping chuck diameter: 140 mm Carriage 1: Longitudinal travel (Z-axis): 320 mm Transversal strocke (X axis): 220 mm Carriage 2: Longitudinal travel (X-axis): 345 mm Cross travel (z-axis): 120 mm Turret slide: number: 2 Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 30/6000 rpm Spindle speeds: 30/6000 rpm Power of driven tools: 2.1 kW Plage vitesse de rotation rad./axial: 30/6000 rpm Collet bore: 36 mm Spindle speeds: stepless from: 40 rpm up to: 8000 rpm Back spindle: max. speed: 40/8000 rpm Power of back spindle: 26/21 kW st ...
used
Table length: 3100 mm Table width: 900 mm Longitudinal X: 2500 mm Cross Y: 900 mm Vertical Z: 800 mm Positions ATC: 30 Positions APC: 0 CNC Brand: Heidenhain CNC Model: iTNC 530 MAKE DMG TYPE 250 linear YEAR 2004 SPECIFICATIONS X - Travel 2500 mm Y - Travel 900 mm Z - Travel 800 mm Controll ITNC 530 Table Length x Width 3100 x 900 mm Table load in kG 3000 Kg Spindle Taper HSK 63 kW power on spindle 35 kW Spindle speeds / ranges 18.000 Rpm ATC tool changer 30 Coolant true spindle / Bar 17 Bar Number off controlled axis 5 CNC Automatic milling head / Gr.0.001 Gr DIMENSIONS Length 6500 mm Width 3000 mm Height 3000 mm   ...