generator 20 kw used for sale

Caterpillar Very low Running Hours1354 , Year 2012 Radiator Cooled set is available for sale. Generator Details: MAKE:CATERPILLAR TYPE:3512B KW:1424 KVA:1700 RPM:1800 YEAR:2012 RUNNING HOURS:1354hrs Injector: 3861769 ECM SOFTWARE 3440317 TURBO 299401 Above Good Running Caterpillar Generator has been Removed from Oil Rig... Condition is Excellent... Engine with Alternator on Common base Frame..

10 Cummins 1 MW, containerized, 2021 new, 0 hours, $238,000 each 7 Caterpillars 1.6 MW, containerized, 2012, some hours average 16,000, $247,000 each stock of 15 small chinese Diesel fired Gensets, 100 - 300 kW, brand new, 0 hours, alltogether 2.41 MW el, $345,000 all. All subject to prior sale.

10 Cummins 1 MW, containerized, 2021 new, 0 hours, $238,000 each 7 Caterpillars 1.6 MW, containerized, 2012, some hours average 16,000, $247,000 each stock of 15 small chinese Diesel fired Gensets, 100 - 300 kW, brand new, 0 hours, alltogether 2.41 MW el, $345,000 all. All subject to prior sale.

Single-line pump, for fluid grease, central lubrication, lubrication pump SKF MKF1-KW2-20001+428 Q: 0,0,1 l/min pmax: 30 bar engine: Shang Yi Motor 178-900-043+428 230 V 50 / 60 Hz 0.12 / 0.15 kW ( 120 / 150 W ) Without tank ! New, with documents ! Dimensions ( pump, upright ): 215 x 135 x 285 mm Dimensions ( packaging ): 380 x 310 x 140 mm

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

Weiss Temperature Test Chamber KWP 64/75 Cooling-heating mode : -70°C ... +130°C Cooling: 2.5 approx. k/min Heating: 3.0 approx. K/min Temperature stability: +-0.5...+-1.0K Insertion dimensions: height 1360 mm, width 880 mm, depth 1000, mm External dimensions: height 1215 mm, width 800 mm, depth 960 mm Test chamber dimensions height 400mm, width 500mm, depth 325mm The connection voltage is: 230V/1Ph+N+PE/ 50 Hz (+6%/-10%) Gplvqvbz Connected load: 1.4 kVA Plug: Schuko 16A Weight : 180 kg Type: KWP 64/75 The Weiss temperature chamber has been monitored with calibrated and calibrated test equipment!

KWANDONG”(2x) DOOSAN 746 kW each (2006) Gross/Net tonnage 56/38; L X B X D; 23.5 x 4.80 x 2.05 M Ship name: HHIC-2 Port of registry: Philippine Subic Delivery day: 2006.12 Gross Tonnage: 40 Tons Class: Korea Society of Ship Inspection & Technology Capacity: 60

Linear guide carriage INA KWVE-25-WL-UG G3-V1 009-191-518/0431 New ! Dimensions (packaging): 200 x 140 x 70 mm

Dual Inverter, Compact Inverter AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA Input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 1x Regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Dual inverters, compact inverters AMK AMKASYN KWD 2 Version 03.11 2x 2.0 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Dual Inverter, Compact Inverter AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA Input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x Regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Heating controller KIEBACK & PETER KWH-A 24 V ( 24V ) ambient temperature: 0...50°C New ! Dimensions: 150 x 135 x 100 mm

Cooling module for welding machines, circulating air cooling module for water-cooled welding machines KJELLBERG KWE 501 400 V Dimensions: 530 x 335 x 395 mm

single-line pump, central lubrication, lubrication pump VOGEL MKU2-KW3-22013+428 Q: 0,2 l/min p: 30 bar engine: 0.105 kW 2700 rpm 230 V 1AC 50 / 60 Hz tank capacity: 2.7 l used, tested ! Dimensions: 300 x 140 x 300 mm

Centrifugal pump, water pump, KSB KWPKA 80-250 Q: 27.8 l/sec. ( 100 m3/h ) H: 20 m Intake side: Internal diameter: Ø 100 mm Flange diameter: Ø 160 / 210 mm pressure side: Internal diameter: Ø 80 mm Flange diameter: Ø 1 1 40 / 200 mm Engine: SIEMENS 1LA5163-4GA70 11 kW 1455 rpm 380 / 660 V 3AC 50 Hz New ! Dimensions: 1270 x 600 x 600 mm

Dual inverters, compact inverters AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x controller card: AMK KW-R03 spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC !, among others used, tested ! Dimensions: 200 x 55 x 320 mm

Dual inverters, compact inverters AMK AMKASYN KWD 2 Version 03.07 2x 2.0 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x controller card: AMK KW-R03 spare part for cylindrical grinding machine NOMOCO VSR5-230-CNC ! used, tested ! Dimensions: 200 x 55 x 320 mm

Linear guide carriage, ball guide carriage REXROTH KWD-020-SNS-C1-N-1 R162281420 Height Guide carriage: 25.35 mm design: SNS ( narrow, normal, standard height ) nominal size: 20 mm New, with underlays ! Dimensions ( Linear Guide Carriage ): 75 x 44 x 26 mm Dimensions (packaging): 90 x 70 x 35 mm

Brush machines with injection molds Our entire machine park from the brush department is for sale. We sell machines with injection molds. The full list of machines and injection molds is in the attachment.

Description: 5.28 KWp New solar modules 16x Trina TSM-330DD06M.05 polycrystalline solar modules packed with 16 solar modules each on a pallet. Pallet NO. 2 Nominal power per solar module: 330 Wp Condition of solar modules: new Logistical data solar modules: 1,700 mm x 1,00 mm x 35 mm Logisticdata: Dimensions per pallet: 1,800 mm x 1,200 mm x 760 mm Weight per pallet module: 315 kg Total weight: 315 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 760 mm, weight approx.: 315 kg

Description: 4.59 KWp New solar modules 3x DMEGC DM495M10-66HSW, 2x DMEGC DM450M6-72HSW, 5x Suntech STP450-B72/vhn solar modules mono packed with 10 solar modules each on a pallet. Pallet NO. 1 Nominal power per solar module: 450 Wp, 495 Wp Condition of solar modules: new Logistical data solar modules: 2,092 mm x 1,038 mm x 35 mm, 2,092mm x 1,135mm x 35mm, 2,095mm x 1,038mm x 35mm, Logisticdata: Dimensions pallet: approx. 2,100 mm x 1,200 mm x 550 mm Weight pallet modules: approx. 270 kg Total weight: 270 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 2,100 x 1,200 x 550 mm, weight approx.: 270 kg

Description: 8,255 KWp New solar modules 3x Jinko JKM54HC-B, Longi LR5-54HIB-400M, Jinko JKM400M-54HC4-B, Denim UM3410BB108H, Canadian CS6R-430H-A6, Jinko JKM420N-54HC-4-B, Hyundai HiE-S410VG solar modules packed in 20 solar modules each a palette. Pallet NO. 4 Nominal power per solar module: 400 Wp - 430 Wp Condition of solar modules: As good as new Logistical data solar modules: 1,720 mm x 1,134 mm x 30 mm, 1,720mm x 1,194mm x 30mm , 1,722mm x 1,134mm x 30mm , 1,722mm x 1,134mm x 30mm , 1,720mm x 1,130mm x 30mm , 1,720mm x 1,140mm x 35mm Logisticdata: Dimensions pallet: approx. 1,800 mm x 1,200 mm x 825 mm Weight pallet modules: approx. 450 kg Total weight: 450 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 825 mm, weight approx.: 450 kg

Description: 5,705 KWp New solar modules 2x Canadian Solar CS3L-360MS, 1x Longi LR4-60HPB-360M, 1x Jolywood JW-HD120N-380, 3x Denim M2B375BT620H, 2x Longi LR4-60HPH-375M, 3x Risen RSM40-8-390MB, 3x URECO FBK400MFD solar modules packed ever 15 solar modules on a pallet. Pallet NO. 3 Nominal power per solar module: 360 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,770 mm x 1,048 mm x 35 mm, 1,754mm x 1,037mm x 34mm, 1,756mm x 1,038mm x 35mm, 1,754mm x 1,037mm x 35mm, 1,254mm x 1,038mm x 35mm, 1,750mm x 1,095mm x 30mm, 1,722mm x 1,133mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 675 mm Weight pallet modules: approx. 332 kg Total weight: 332 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 675 mm, weight approx.: 332 kg

Description: 3,795 KWp New solar modules 1x Neo-Solar D6N29E3A, 1x JA-Solar JAM60S02-300, Hanover Solar HS300M-30D, Hyundai HiE-345SG, JA-Solar JAM54S31-390MR, Jinko JKM390N-6RC3-B, Denim UM3450BB120H solar modules packed with 11 solar modules each on a pallet. Pallet NO. 6 Nominal power per solar module: 300 Wp - 450 Wp Condition of solar modules: New Logistical data solar modules: 1,640 mm x 990 mm x 30 mm, 1,650mm x 990mm x 30mm , 1650mm x 990mm x 30mm , 1,620mm x 1,070mm x 30mm , 1,720mm x 1,030mm 30mm , 1,850mm x 1,630mm x 30mm , 1,910mm x 1,130mm x 30mm Logisticdata: Dimensions pallet: approx. 1,950 mm x 1,200 mm x 550 mm Weight pallet modules: approx. 255 kg Total weight: 255 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,950 x 1,200 x 550 mm, weight approx.: 225 kg

Description: 6,235 KWp New solar modules JA-Solar JAM60S02-300/PR, Canadian CS3L-375MS, Trina TSM400DE09.08, Trina TSM-390DE09.05, Canadian CS6R-400MS, Phono-Solar PS400M6H-18NH solar modules packed with 16 solar modules each on a pallet. Pallet NO. 5 Nominal power per solar module: 365 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,668 mm x 1,050 mm x 35 mm, 1,764mm x 1,047mm x35mm , 1,753mm x 1,095mm x 30mm , 1,754mm x 1,096mm x 30mm , 1,754mm x 1,096mm 30mm , 1,721mm x 1,133mm x 30mm , 1,720mm x 1,132mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 740 mm Weight pallet modules: approx. 359 kg Total weight: 359 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 740 mm, weight approx.: 359 kg

Linearantrieb G.A.S., Gesellschaft für Antriebs- und Steuerungstechnik mbH KA 50 HUB 200 ( KA50HUB200 ) 302502 stroke: 200 mm used, tested ! Dimensions: 315 x 160 x 95 mm

Tilting table, clamping table PAGUS Clamping surface: 200 x 200 mm 60° Tiltable 3 grooves Groove width: 14 / 24 mm Dimensions: 245 x 205 x 110 mm

Pneumatic cylinder DESTACO K 3000 - 200 - 6 stroke: 200 mm rod diameter Ø 65 mm Dimensions: 540 x 130 x 130 mm

Pneumatic cylinder FESTO DNGU-32-200-PPV-A S3 158098 stroke: 200 mm rod diameter Ø 12 mm Dimensions: 345 x 95 x 50 mm

Pneumatic cylinder FESTO DNC-100-200-PPV-A 163472 stroke: 200 mm rod diameter: Ø 35 mm pmax: 12 bar used, tested ! Dimensions: 580 x 115 x 160 mm

Pneumatic cylinder JOUCOMATIC PES 125 TA 200 RDM 45070772 Piston Ø 125 mm stroke 200 mm rod diameter Ø 32 mm Dimensions: 500 x 220 x 155 mm

Scooter ITOH DENKI Power Moller PM 570 AS - 15 - 200 - 3 - 200 - NR 630 A Diameter: Ø 63 mm Length: 200 mm New ! Dimensions: 260 x 70 x 70 mm

3-jaw chuck, three-jaw chuck, lathe chuck WMW, ROTO RECORD DH 200 x 3 - III TGL30 2332 Outer Ø: 200 mm Centering Ø: 155 mm bolt circle Ø (chuck) : 174 mm bore Ø: 54 mm height with jaws: 106 mm including feed wrench used, tested ! dimensions ( lathe chuck ): 200 x 200 x 106 mm

4-jaw chuck, four-jaw chuck, lathe chuck WMW, NILES DH - A - 200 x 4 TGL30 2332 outer Ø: 200 mm centering Ø: 155 mm bolt circle Ø (chuck) : 174 mm bore Ø: 54 mm height with jaws: 104 mm including feed wrench used, tested ! Dimensions ( lathe chuck ): 200 x 200 x 104 mm

Centering vice, centric clamp PAGUS jaw width: 200 mm jaw height: 50 mm wingspan: 0...200 mm on turntable with graduation 360° rotatable used, tested ! Dimensions: 500 x 300 x 180 mm

Power chuck, 3-jaw chuck, three-jaw chuck, wedge hook chuck RÖHM KFD-200/3HS 143888 outer diameter: Ø 200 mm Height without jaws: 110 mm Passage: Ø 66 mm Speed: max. 6500 rpm Flange diameter: Ø 200 / 170 mm bolt circle diameter: Ø 134 mm 3x screw M12 x 1.75 jaws individually adjustable by toothing ! with accessories ! New ! Dimensions ( lathe chuck ): 200 x 200 x 110 mm Dimensions ( packaging ): 230 x 230 x 240 mm

Pneumatic cylinders, variant cylinders, round cylinders, double-acting SMC CD85N25-200-B stroke: 200 mm Piston diameter: Ø 25 mm Rod diameter: Ø 10 mm Rod thread: M10 x 1,25, Length: 20 mm pmax: 1.0 MPa ( 10 bar ) Mounting thread: M22 x 1.5, length: 20 mm Mounting socket: Ø 8 mm, length: 16 mm New ! Dimensions: 340 x 30 x 30 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DSBC-40-200-PPVA-N3 1376663 stroke: 200 mm piston diameter: Ø 40 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, length: 22 mm pmax: 12 bar used, checked! Dimensions: 363 x 54 x 54 mm

pneumatic cylinder, standard cylinder, double-acting FESTO DSBC-40-200-PPVA-N3 1376663 stroke: 200 mm piston diameter: Ø 40 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm pmax: 12 bar New ! Dimensions: 363 x 54 x 54 mm

Belt cylinder NORGREN M/146025/M/200 stroke 200 mm piston diameter Ø 25 mm 1 - 8 bar Carriage: 130 x 32 mm used, tested ! Dimensions: 400 x 75 x 65 mm

Pneumatic cylinders, standard cylinders, double-acting FESTO DNC-63-200-PPV-A SA1318278A 2025368642 / 40 B9088 stroke: 200 mm rod diameter Ø 20 mm pmax.: 12 bar used, tested ! Dimensions: 400 x 75 x 125 mm

Hydraulic test press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 pressure max: 200 kN stroke: max approx. 200 mm (at the moment burned by measuring probe and limit switch) greatest height: 400 mm table: 340 x 340 mm 380 V Dimensions: 1300 x 840 x 2050 mm

Welding table, straightening table, straightening flap, work table, clamping table, straightening plate, straightening table, spotting plate PAGUS Working surface: 205 x 205 mm height: 85 mm used, tested ! Dimensions: 410 x 205 x 85 mm

Welding table, straightening table, straightening pad, working table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 200 x 200 mm height: 80 mm used, tested ! Dimensions: 390 x 200 x 100 mm

Drill, high-frequency tool, high-frequency machine BOSCH 0 602 118 001 0.36 / 0.42 KW 200 / 265 V 150 / 200 Hz connection cable approx. 3.5 m used, tested ! untested ! Dimensions: 450 x 300 x 90 mm

Drilling machine, high-frequency tool, high-frequency machine BOSCH 0 602 102 001 0,16 / 0.2 KW 2300 / 3300 rpm 200 / 265 V 150 / 200 Hz connection cable approx. 2.8 m used, tested ! untested ! Dimensions: 350 x 200 x 70 mm

3-jaw chuck, three-jaw chuck ROTO RECORD DHAP 200 TGL 30 2334 outer Ø: 200 mm bolt circle Ø: 175 mm bore Ø: 54 mm height with jaws: 120 mm max. 3200 rpm split jaws ! Dimensions: 200 x 200 x 120 mm

3-jaw chuck, three-jaw chuck BISON 3204-200 outer Ø: 200 mm bore: Ø 55 mm br />

4-jaw chuck, four-jaw chuck, lathe chuck BISON 3604-200 outer Ø: 200 mm bore: Ø 55 mm br />

Tin Shears, High Frequency Sheet Metal Nibbler, High Frequency Tool, High Frequency Machines BOSCH EW/HEP 64A4Z1 0,1 / 0.12 KW 2075 / 2775 strokes / min 200 / 265 V 3AC 150 / 200 Hz sheet thickness: max. 2.5 mm approx. 3.5 m Connection cable used, checked! dimensions ( without cable ): 240 x 230 x 90 mm