gear machine fo used for sale

One side centering tips, opposite side SK50 adapter in different mounting diameters

Klingelnberg PFS600 Gear tester

MITSUBISHI GUIDELESS CNC GEAR SHAPER Model ST40A s/n will advise Condition; NEW Condition Delivered and installed July 2020 low hours Less than 1900 hours Machine was delivered and installed 3rd QTR of 2020 and has been hardly used. Customer is looking to sell due to limited work and project loss.machine is available for immediate inspection. Machine is equipped with all required features, Tailstock & Pinion support, chip conveyor and all options. Machine wont last contact us today Machine specifications to follow shortly: -Maximum diameter capacity 18" / 450 mm Option -Maximum DP/ module 3.175 DP/8 mod -Maximum work width 4.52" / 115 mm -Maximum cutter stroke 5.31" / 135 mm -Maximum helix angle + 45 deg -Cutter stroke 30-600 SPM -number of cuts 1-4 -Center distance from cutter Max/ Min 16.73" / -4.92" -Maximum radial travel 21.65" -Height of work table to spindl ...

Under current

Wheel diameter - max. 320 mm Wheel width 50 mm Module - max. 7.5 Module - min. 2.1 Total power requirement 13 kW Machine weight approx. 7 t Space requirement approx. 1.7 x 1.9 x 2.7 m Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through-hole spindle pieces 78 mm. Dive max 20 mm. Cut feeds, infinitely variable 0.04 - 25 mm/min. Distance between taper tip/workpiece spindle... 100 - 345 mm. Distance between the centre of the cone and the cutter head axis 25 - 150 mm. Distance between the center of the taper and the milling head spindle... 80 - 220 mm. Max. ring wheel Ø at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer cone spacing approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes of angle... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, external 85 m ...

Wheel diameter - max. 300 mm Spindle speeds 250 - 2800 rpm Feed min/max 45/125 mm Module 8 Taper spindle ISO 40 Partial head angle 110º Total power requirement 3 kW Machine weight approx. 1.5 t Space requirement approx. 1.5 x 1.4 x 1.9 m

max diam 250 , max modul 5

Key data: 250 , 400 , 10

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

max diam 340 , max modul 8

Max. grinding length : 450 mm Max.clamping length : 700 mm Thread diameter : 3–200 mm Thread pitch : 0,40–80 mm Max. angle pitch : -25º / +25º Grinding wheel diameter : 275-350 mm Grinding wheel width : 8-40 mm Grinding wheel bore : 160 mm Grinding wheel speed : 1550-1900 rpm Weight approx : 3500 kg

Gear hobber sharpener Kapp AS 305 B

Inv. Num. : 7169 Type: RM 80 Producer: Wera Created: 2002 Parameters: Operating system: SIEMENS SINUMERIK Maximum gear diameter: 80 mm Machine weight: 3500 kg

Spiral Bevel gear generator Klingelnberg AFK 201, AFK203

Description: Connection: 13 kVA Table circle diameter with external and internal gearing: max. 250 mm Shaping module for cover profile and steel: max. 5 mm For sprockets up to roller diameter: 16 mm Distance between cutting wheel and workpiece axis to the outside: max. 250 mm To the inside: max. 70 mm Table slide travel: max. 320 mm Stroke length: max. 50 mm Stroke position displacement: max. 25 mm Shaping spindle diameter: 90 mm Mounting hole in the push spindle: 50 mm Workpiece table diameter: 186 mm Distance between the top edge of the table and the face of the shaping spindle (without cutting wheel holder) at 50 mm stroke length: max. 245 mm Attention: the machine can be transported on a normal standard truck Approx. Onsite Dimension. (l x w x h): 6,000 x 4,000 x 3,500 mm, weight approx.: 6,500 kg

Wanderer 31 L500 Screws & Thread Milling Machine -Workpiece length max. 500mm -Oscillating range above bed approx. 400mm -Spindle bore approx. 80mm -Speed range 55 - 250 rpm -Work light -Interchangeable wheels (see range) Dimensions: LxWxH 2.5x1.4x1.6 meters /Weight 2600Kg Errors / input errors excepted Coqznl9t

Manufacturer: WMW Type: ZFWZ 500 x 5 Stock number: 1010 Wheel diameter - max.: 500 mm Wheel width: 180 mm Module - max. 5 Module - min. 0.5 Total power requirement 3.5 kW Machine weight approx. 1950 kg Table bore: MK 5 Distance between milling cutter and workpiece 10 - 200 mm Speed range: 50 - 200 rpm Table diameter: Ø 250 mm Control: conventional

Description: Various spare parts for Koepfer 140 gear hobbing machines Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm, weight approx.: 75 kg

Description: Technical details: Wheel diameter - max. 406 mm, wheel width 420 mm, module - max. 4.3, module - min. 0.5, cutter speeds 49 - 246 rpm, table bore diameter 80 mm, total power requirement 7 kW Approx. Onsite Dimension. (l x w x h): 2,800 x 1,600 x 2,200 mm, weight approx.: 3,500 kg

Gearwheel Shaping machine WMW Modul ZSTTK 1250x24

max diam 670 , max modul 12

CNC Control : SIEMENS 840D Max. Module : 7 Max. Diameter : 400 mm Z axis vertical travel : 200 mm X axis horizontal flange travel : 255 mm Y axis – shifting : 135 mm Work piece holder inclination : 45° Max. Wheel diameter : 350 mm Min. Wheel diameter : 270 mm Filtration unit

PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding ...

Description: SN 13135 Toothing width - max. 25 mm Pitch circle diameter - external toothing 120 mm Pitch circle diameter - internal toothing 120 mm z-way 150 mm Spindle diameter 85 mm Mounting taper - steep taper PKP 45 Workpiece table - Ø 160 mm Table bore 63 mm Stroke rate - infinitely variable 500 / 2500 strokes/min Workpiece speed max. 125 1/min. Bevelling angle - max. + / - 45 ° Tool diameter max. 125 mm Table load max. 1000 KG Minimum distance table surface - tool spindle 0 / + 180 mm Maximum distance table surface - tool spindle 200 mm Maximum distance table surface - tool spindle 350 mm Connected load 40 kVA Description: Motorised stroke adjustment, workpiece storage, automatic workpiece change, chip conveyor (magnetic), coolant device Dialogue program, fault diagnosis max. wheel diameter: max. 250 mm, module min./max.: max. 3,5, control: SINUMERIK 840 C S ...

Max. wheel diameter : 400 mm Gear width : 0 - 300 mm Max. module : 8 Min. module : 0,3 Number of teeth : 5 - 999 Tooth width (Z1- grinding slide travel) : 0 - 300 mm Centre distance : 60 - 700 mm Max. helix angle : +/- 45 ° Workpiece weight max : 300 kg Tip circle diameter : 10 - 400 mm Root circle diameter : 10 - 400 mm Equipment/Accessories : CNC : Siemens 840D Pallet conveyor : Coolant/filter device Novotecnic : CNC dressing device REISHAUER :

Description: Machine no. 6121 Wheel diameter - max. 125 mm Module - max. 3 Toothing width max. (spur gears) 24 mm SINUMERIK 840 D control unit Table diameter 145 mm Table bore 80 mm Table speed infinitely variable 0.03 - 50 rpm Centre distance -25 to +180 mm Swivelling angle max. 12 degrees Inclination angle - max. 45 ° Stroke rate (double strokes) 1,500 - 3,000 DH/min Shock spindle speeds min./max. 0.0076 - 43 rpm Stroke position adjustment 70 mm Stroke length min./max. 0 - 30 mm Shaping spindle diameter 85 mm Cutting wheel holder HSK 80 B Drive power 7.5 kW Total power requirement 30 KVA Description: Tool: Number of teeth = 1 - 200 module min. 0.05 Workpiece: Number of teeth = 1 - 1500 module min. 0.05 Counter holder rotatable with 4 positions Automatic workpiece changing device Linear workpiece belt Approx. Onsite Dimension. (l x w x h): 4,300 x 2,800 x 2,900 mm, weight approx.: 8 ...

Description: serial number: 1038  , the largest cross-section of the knife: ,32 - 20 mm table diameter: ,630 mm slider adjustment: ,500 mm slotting height: ,320 mm  , the offer does not include other elements of machines, devices and tools that are not related to the machine.  , please also have a look at the videos and the PDF documents of this machine weight approx.: 5,650 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 3,100 mm

Description: serial number: 29660 control: SIEMENS Sinumerik 840D  , travels: X-axis: 160 mm Y-axis: 220 mm Z-axis: 350 mm max. tool diameter: 130 mm milling head swivel angle (A-axis): +/- 45°  , workpiece table: outer diameter: 200 mm clamping diameter: 150 mm bore: 45 mm max. table speed: 1000 rpm  , milling head: , drive power: 11.5 kW max. module: 3 mm max. milling cutter speed: 4000 rpm max. head circle diameter of the milling cutter: 100 mm max. cutter length: 317 mm max. cutter length (toothed): 240 mm  , rapid traverse: X-axis: 20 m/min. Y-axis: 10 m/min. Z-axis: 7 m/min.  , connected load: 40 kVA  , including: ASTOS DML200/1576/1340 Chip Conveyor, YOM: 2006, weight: 150 kg RELEN UC Compact 1 Extraction Filter, YOM: 2006, power: 0.57 kW, rotational speed: 2750 rpm, air supply 1200 m3/h  , witho ...

Description: serial number: 057129 control: REXROTH INDRAMAT BTV20  , rated power: 33 kW  , including: KNOLL KTS 25-60-T Screw Spindle Pump RUMA MZ 90 B 500 Cleaning Machine YOM 2005, max rotary speed: 4000 rpm, max. quantity of solids: 12 kg, power: 2.2 kW, weight: 850 kg control: REXROTH INDRAMAT BTV20, total power requirement: 33 kW, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 3,000 x 2,800 mm

Description: serial number: 44742 control: SIEMENS Sinumerik  , max. wheel diameter: 150 mm min. module: 1.25 max. module: 3.5 tooth width: 45 mm bore diameter: 100 mm clamping surface: 1300 x 300 mm  , including: IFE IFS 2000 Suction Filter, YOM: 1998, power: 0.75 kW conveyor/transportation system  , please also have a look at the PDF documents of this machine control: SIEMENS Sinumerik, max. module: 3.5 mm, Approx. Onsite Dimension. (l x w x h): 2,800 x 2,500 x 2,800 mm, weight approx.: 7,000 kg

Description: SAMPUTENSILI SU-SM 2TA Gear Tooth Deburring Machine weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,000 mm

Description: serial number: 28793 control: SIEMENS Sinumerik 840D  , max. wheel diameter: 130 mm wheel width: 25 mm min. module: 0.5 max. module: 4 stroke rate: 500 - 2500 strokes/min. stroke: 30 mm shock spindle diameter: 85 mm total power requirement: 48 kVA  , please also have a look at the video and the PDF document of this machine max. wheel diameter: 130 mm, module min./max.: 0.5 / 4, gear width: 25 mm, control: SIEMENS Sinumerik 840D, stroke length max.: 30 mm, no. of strokes: 500 - 2500 rpm, total power requirement: 48 kW, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,400 x 3,000 mm

Description: Control type: CNC, control name: Siemens Sinumerik 840 C Technical details: Workpiece diameter at ratio 1:10 300 mm, workpiece diameter at ratio 1:1 212 mm, number of teeth - max. 200, number of teeth - min. 6, x-travel 300 mm, X - axis speed 0.1-5,000 mm/ sec., y-travel 400 mm, Y - axis speed 0.1-5,000 mm/sec., A - axis -170 / +170 °, total power requirement 38 kW, machine weight approx. 10 t, space requirement approx. 4.20 x 2.20 x 2.10 m weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 2,200 x 2,100 mm

Description: serial number: J0173 control: SIEMENS Sinumerik 840D  , travels: X-axis: 160 mm Y-axis: 220 mm Z-axis: 350 mm Z4-axis (counterholder): 350 mm  , largest milling head swivelling angle: +/- 45°  , tool (cylindrical milling cutter): largest permissible tip circle diameter: 100 mm largest toothed length: 240 mm largest length: 317 mm  , workpiece table: outer diameter: 200 mm clamping diameter: 150 mm bore:45 mm max. workpiece weight: 3 kg  , workpiece: max. workpiece diameter: 130 mm max. modul: 3 mm  , feed rate: X-axis: 20 m/min. Y-axis: 10 m/min. Z-axis: 7 m/min.  , connected load: 40 kVA  , including: REVEN UC Compact 1 Oil Separator, YOM: 2008, power: 0.57 kW, rotational speed: 2750 rpm, air supply: 1200 m3/h ASTOS DML 200x1576x1340 Chip Conveyor, YOM: 2009, weight: approx. 200 k ...

Description: serial number: 75041 control: SIEMENS Sinumerik 840D working hours: approx. 74676 hrs.  , travels: X-axis: ,490 mm Y-axis: 220 mm Z-axis: 300 mm  , rotary and swivel axes: A1-axis (grinding head): rotation angle: +/- 48° rotational speed: 28°/s B1-axis (grinding spindle): power: 10 kW max. rotational speed: 4010 rpm C-axis (workpiece spindle): torque: 180 mm rotational speed: 0 - 480 rpm C1-axis (tool carrier): swivel angle: 30°  , rapid traverse: X-axis: 15 m/min. Y-axis: 5 m/min. Z-axis: 5 m/min  , workpiece diameter: 5 - 400 mm total power requirement: 42 kVA  , please also have a look at the PDF documents of this machine control: SIEMENS Sinumerik 840D, Approx. Onsite Dimension. (l x w x h): 3,500 x 3,500 x 2,700 mm, grinding head swivellable +/-: +45/-45 °, x-motion: 490 mm, y-motion ...

Description: serial number: 362013 control: BURRI  , workpiece diameter: 10 - 360 mm max. workpiece weight: 60 kg module: 0.5 - 7 mm teeth: 6 - 999 helix angle: +45° to -45° clamping: 162 - 556 mm carriage stroke: 200 mm grinding wheel diameter: 250 - 350 mm grinding wheel width: 104 mm average speed: 63 m/s number of gears: 1 - 5 power consumption: 8 kVA  , including: PROMOT S5 NC Automatic Loading System, YOM: 1998, serial number: 97049501, control: SIEMENS Sinumerik KRAINTEK RM Cleaning System, YOM: 2017, power: 3 kW KNOLL AE 1114 Cooling/Filtration System, YOM: 2008, connected load: 50 kW, control: SIEMENS Simatic Panel KNOLL HL 1000/3300 Hydrostatic Filter, YOM: 2008 ELBARON RH 20 D Suction Filter, YOM: 1998, power: 1.5 kW  , please also have a look at the PDF documents of this machine workpiece diameter: 10 - 360 mm, control: BURRI, m ...

Description: serial number: 76220 control: SIEMENS Sinumerik 840D HMI working hours: approx. 36527 hrs.  , travels: X-axis (grinding worm feed): ,195 mm Y-axis (shift feed): 160 mm Z-axis (grinding feed): 100 mm  , rotary and swivel axes: B-axis (grinding spindle): power: 10 kW max. rotational speed: 5555 rpm C1 and C2-axis (workpiece spindle): torque: 25/70 mm rotational speed: 0 - 1000 rpm C4-axis (turn dressing device): swivel angle: 30° max. rotational speed: 5 rpm  , auxiliary axes: A-axis (bevel angle adjustment): rotation angle: +/- 40° rotational speed: 28°/s C3-axis (turn turret): swivel angle: 225° rotational speed: 50 rpm  , rapid traverse: X-axis: 15 m/min. Y-axis: 5 m/min. Z-axis: 5 m/min  , workpiece diameter: 10 - 145 mm number of teeth: 5 - 150 max. shaft length: 350 mm module rang ...

Description: machine number: G0500 control: SIEMENS Sinumerik  , length of clamping surface: 1550 mm number of T-slots: 2 mm width of the T-slots: 18 mm distance between the T-slots: 180 mm centre height (tailstocks): 350 mm swivelling range of the fine wheel head (U-axis): +/- 30° centre distance tailstock/fine wheel: 120 - 225 mm  , travelling distance of infeed slide (Z-axis): 105 mm  , tool: outer diameter: 225 - 275 mm bore diameter: 160 mm width: 60 mm  , workpiece: outer diameter: 40 - 150 mm module: 1.25 - 4.0 mm max. tooth width: 45 mm  , max. tool speed: 2000 rpm feed speeds: Z-axis: 2 m/min. Y-axis: 2 m/min. U-axis: 12°/s  , connected load: 27 kVA  , please also take a look at the PDF documents of this machine workpiece diameter: 45 - 150 mm, control: SIEMENS Sinumerik, weight approx.: 6,000 kg, Approx.  ...

Description: serial number: G0502 control: SIEMENS Sinumerik 840C  , length of clamping surface: 1550 mm number of T-slots: 2 mm width of the T-slots: 18 mm distance between the T-slots: 180 mm centre height (tailstocks): 350 mm swivelling range of the fine wheel head (U-axis): +/- 30° centre distance - tailstock/fine wheel: 120 - 225 mm  , infeed slide: movement range (=travelling distance Z-axis): 105 mm  , tool diameter: 225 - 275 mm bore diameter: 160 mm tool width: 60 mm  , workpiece diameter: 40 - 150 mm module: 1.25 - 4.0 mm max. tooth width: 45  , please also have a look at the PDF documents for this machine workpiece diameter: 40 - 150 mm, control: SIEMENS Sinumerik 840C, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 3,500 x 2,300 mm

Description: serial number: J0146 control: SIEMENS Sinumerik 840D  , travels: X-axis: 160 mm Y-axis: 220 mm Z-axis: 350 mm Z4-axis (counterholder): 350 mm  , largest milling head swivelling angle: +/- 45°  , tool (cylindrical milling cutter): largest permissible tip circle diameter: 100 mm largest toothed length: 240 mm largest length: 317 mm  , workpiece table: outer diameter: 200 mm clamping diameter: 150 mm bore:45 mm max. workpiece weight: 3 kg  , workpiece: max. workpiece diameter: 130 mm max. modul: 3 mm  , feed rate: X-axis: 20 m/min. Y-axis: 10 m/min. Z-axis: 7 m/min.  , connected load: 40 kVA  , including: ASTOS DML 200/1576/1340/60 Chip Conveyor, YOM: 2008, weight: 150 kg REVEN UC Compact 1 Oil Separator  , without conveyor system and tool cabinet  , please also ha ...

Description: serial number: D0043 control: SIEMENS Simatic OP7 working hours: approx. 42802 hrs.  , max. wheel diameter: 300 mm gear width: 100 mm max. module: 5 max. workpiece: 1100 mm spindle bearing diameter: 100 mm diameter of spindle flange: 120 mm tailstock travel: 80 mm  , please also have a look at the PDF documents of this machine control: SIEMENS Simatic OP7, max. module: 5 mm, Approx. Onsite Dimension. (l x w x h): 2,100 x 3,500 x 2,100 mm, weight approx.: 2,500 kg

Description: serial number: 45641 control: SIEMENS Sinumerik  , clamping surface area: 1475 x 300 mm number of T-slots: 2 T-slot width: 18 mm T-slot distance: 180 mm guide rail width: 59 mm max. outside diameter: 300 mm drilling diameter: ,63.5 - 100 mm connected load: 16 kVA  , please also have a look at the PDF documents of this machine control: SIEMENS Sinumerik, Approx. Onsite Dimension. (l x w x h): 3,500 x 3,000 x 2,200 mm, weight approx.: 5,500 kg

Description: serial number: 085134 control: SIEMENS Sinumerik 840  , spindle speed range: 0 - 6000 rpm spindle drive torque: 6.5 Nm spindle centre height: 1100 mm max. workpiece spindle stroke: 18 mm max. workpiece spindle movement: 800 mm tool taper: SK30 max. wheel diameter: 400 mm max. module: 6 number of teeth: 7 - 100 max. number of strokes: 180/min. power: 24 kW  , please also have a look at the PDF documents of this machine control: SIEMENS Sinumerik 840, max. module: 6 mm, Approx. Onsite Dimension. (l x w x h): 3,200 x 4,000 x 2,100 mm, min. number of teeth: 7 - 100, weight approx.: 9,000 kg

Description: serial number: 6123 control: SIEMENS Sinumerik 840D  , max. wheel diameter: 125 mm max. module: 3 toothing width max. (spur gears): 24 mm table diameter: 145 mm table bore: 80 mm table speed infinitely variable: 0.03 - 50 rpm centre distance: -25 to +180 mm max. swivelling angle: 12° max. inclination angle 45° stroke rate (double strokes): 1500 - 3000 DH/min. shock spindle speeds: 0.0076 - 43 rpm stroke position adjustment: 70 mm stroke length: 0 - 30 mm shaping spindle diameter: 85 mm cutting wheel holder: HSK 80 B drive power: 7.5 kW total power requirement: 30 KVA  , number of teeth: tool: 1 - 200 Module min. 0.05 workpiece: 1 - 1500 Module min. 0.05  , please also have a look at the video and ,PDF documents of this machine max. wheel diameter: 125 mm, module min./max.: 3, gear width: 24 mm, control: SIEMENS Sinumeri ...

Description: serial number: 28788 control: SIEMENS Sinumerik 840D  , max. wheel diameter: 130 mm wheel width: 25 mm min. module: 0.5 max. module: 4 stroke rate: 500 - 2500 strokes/min. stroke: 30 mm shock spindle diameter: 85 mm total power requirement: 48 kVA  , please also have a look at the PDF document of this machine max. wheel diameter: 130 mm, module min./max.: 0.5 / 4, gear width: 25 mm, control: SIEMENS Sinumeric 840D, stroke length max.: 30 mm, no. of strokes: 500 - 2500 rpm, total power requirement: 48 kW, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 3,500 x 3,000 mm

max. wheel diameter:80 mm max. module:3 total power requirement:25-35 kW weight of the machine ca.:10 t workpiece weight:15 kg workpiece length - max.:-50+450 mm table diameter:145 mm diameter of hob:90 mm cutter length max.:220 mm hob turning speeds:1.000 U/min

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

max. wheel diameter:150 mm max. module:3 min. module:1 weight of the machine ca.:7,2 t dimensions of the machine ca.:2,44 x 1,43 x 2,46 m grinding wheel diameter:206-275 mm Betriebsstunden: 99.235 Incl. automatic loading system Felsomat, without filter No Twist Control Grinding Option

max. wheel diameter:150 mm max. module:3 min. module:1 weight of the machine ca.:7,2 t dimensions of the machine ca.:2,44 x 1,43 x 2,46 m grinding wheel diameter:206-275 mm Working hours 98.780 Incl. automatic loading system Felsomat No Twist Control Grinding Option

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine