ge 669 2 used for sale

table length: 4000 mm table width: 2000 mm table height: 200 mm weight: 2400 kg Our welding tables are manufactured with casting quality HT 300 and are nitrated in one piece after mechanical processing. For proper stability, our welding tables are reinforced underneath with welded ribs, as shown in the images. Furthermore, they undergo a 3-day gas nitriding process which increases the corrosion resistance as well as the permanent fracture and vibration resistance of the tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum 665 mm. Thus, a working height of 820 - 865 mm is possible. Further details on the production and characteristics of our tables can be found in our catalogue. The illustrations do not correspond to the original size and are for llustration purposes only. The accessories shown are not included in the product. 3D ...

weight: 340 kg diameter: 960 mm height: 980 mm 0: 219 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GUILLOTINE REEL SPLITTER 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., AVAILABILITY: STOCK - NEW, Force: 30 T

cutting diameter: 280 mm saw band length: 3660 x 27 mm cutting width: 0,9 mm capacity 90 degrees: square: 270 x 270 mm capacity 90 degrees: flat: 210 x 330 mm total power requirement: 1,5 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1350 x 2250 x 1860 mm The GERD WOLFF KMS 280 is a precision servo-driven bandsaw designed for consistently accurate cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shock absorber, gas spring, shock absorber, start-up absorber, impact absorber -Manufacturer: GSL (German Standard Lift), gas spring gas pressure spring 2 pieces -Type: 250N 11/14287251554/00101 -Piston: Ø 28 mm -Piston rod: Ø 14 mm, length 750 mm -Socket: M10 x 1.5 -Price/delivery: complete -Dimensions: Ø 28 x 1585 mm -Weight: 2.1 kg/pcs

Control, control unit, interface, drive control, control unit, control unit, control box -Manufacturer: GSL (German Standard Lift), control box for the drive of work platforms -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 280/245/H310 mm -Weight: 8 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder double-acting stroke 250 mm -Type designation: D063032AA20250 -Piston rod: Ø 32 mm -Recording. diameter 30 mm -Dimensions: 500/75/H120 mm -Weight: 10 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 270 mm -Type designation: E030ZM60279 T24 -Piston rod: Ø 30 mm -Intake: Ø 20 mm, see photos -Number: 2x cylinder available -Price per piece -Dimensions: 470/50/H80 mm -Weight: 4 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder double-acting stroke 240 mm -Type designation: D0400250010260 T20 -Piston rod: Ø 25 mm -Recording. diameter 20 mm -Dimensions: 470/50/H80 mm -Weight: 5.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder with control valve stroke 280 mm -Type designation: D120050AAV60330 T28 -Piston rod: Ø 50 mm -Recording. Ø 40mm -Dimensions: 615/145/H230 mm -Weight: 40 kg

Hydraulic pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer:GSL, hydraulic pump from aerial work platform -Electric motor: GSL type IS1-RA-VP2-Q 24 volts / 4000 watts -Hydraulic pump: Marzocchi 2BK7 S 6 -Dimensions: 220/160/H440 mm -Weight: 26 kg

Hydraulic oil tank, hydraulic oil tank, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Add-on parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 Kg

table length: 2400 mm table width: 1200 mm table height: 200 mm weight: 920 kg Manufacturer: GERD WOLFF Website: www.gerdwolff.com Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technol ...

SINGLE SHAFT SHREDDER 150 kw (or 180 kw), sturdy structure in electro-welded steel, cutting chamber dimensions mm. 2000x1000, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 + 75 kw optional 90 + 90 kw, hydraulic unit power 11 kw (15 HP), transmission by belts, 1 rotor, rotor diameter 480 mm., rotor length 2000 mm., 122 reversible tools, 4 usable tool sides, 8 upper fixed blades, 8 lower fixed blades, 73 average rotor revolutions/min., weight 13000 kg, production 3500-5000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 1000 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 150 kw or 180 kw, width: 2. ...

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 40-200 Nm -Art.No.: 4420-01 -Torque: 40 - 200 Nm / 30 - 150 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 560/60/H60 mm -Weight: 1.3 kg

Quick clamping device, quick release clamp, quick release clamp, pipe clamp, pipe clamping device, pipe quick release clamp -Manufacturer: Georg Fischer GF, quick release device -Type: 21049-790 052 - 235 -Opening angle: 100° -Clamping length: 245 mm -Quantity: 2x clamping device available -Price per piece -Dimensions: 245/300/H275 mm -Weight: 5.0 kg/pc.

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 20D 137 SL Item No.: 88613077 -Size: DN20 3/4 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 7x ball valve available -Price per piece -Dimensions of cardboard: 180/100/H50 mm -Weight: 0.6 kg/pc.

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 25D 137 SL Item No.: 88613078 -Size: DN25 1 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 6x ball valve available -Price per piece -Dimensions of box: 195/120/H60 mm -Weight: 0.9 kg/pc.

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (30 kW), motor cover, base plate, feet, watervalves (original Westfalia) and service tools for maintenance including pressing tool. Just came out of production., Excluding:, - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 25.000 liter per hour, Bowl speed: 4.650 rpm, Motor: 30 kW - 380 V - 50 Hz - 58 A - 1.470 rpm, Weight: 2.300 kg, Dimensions: 195 x 115 x 220 cm

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW

Spiralbindemaschine - Spiral binding machine Gestetner 220 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Key data: 700 mm, 2000 mm, 1600 1/min

Machine Details Stock number 1105-03980 Machine Type: CNC Lathe Make GEMINIS Type GHT 4 G2 X 700 X 2000 Year of construction 2006 CNC control type Control FAGOR TC 8055 Storage location FRANCE Country of origin Delivery time immediately Freight base from location Price Technical details Turning diameter 720 mm Turning length 2000 mm Control FAGOR TC 8055 Spindle diameter 104 mm Turning diameter over carriage 470 Speed 0 - 1600 m/min Voltage 400 V Machine weight approx. 7 t Information CNC FAGOR 8055 TC

Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 nominal voltage: 230, 380-500V Conveying length in mm: 2400 Nominal / outside width in mm: 1300 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SE ...

General SKU371U1014 LocationBarneveld MakeGEA Type200/0.5-K0W No.18732 Year of construction2000 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Motor1.1 KW Surface0.54 m2 Specified Features - Film evaporator Film evaporatorcheck Heating surface0,54 m² Capacity45 Ltr. Rotor sizesdia. 200x1200 mm Product inletDN15 Product outletDN50 Vapour outletDN100 With jacketcheck (7 Ltr.) Max. temperature350 °C Motor1,1 kW Rotor speed260 rpm MaterialStainless steel 1.4571 (316Ti) Information Floorspace0,45x0,6 m Total height2 m Extra SpecificationsUNUSED with flexible graphite brushes Film evaporatorsGEA CanzlerColumns > Film evaporatorsBrand > GEA Canzler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...

General SKU094F478 LocationBarneveld MakeGebr. Ruberg Maschinenfabrik Nieheim TypeFCM-200 SR No.171/11577 Year of construction2001, Suitable for barrels dia. 582x1015mm Main Features MaterialStainless steel Volume200 Ltr. Motor7.5 KW Specified Features - Cold mixer MaterialStainless steel 1.4301 (304) Cold mixerBatch barrel mixer (1x) Vessel sizesdia. 650x400mm With motor7,5 KW, 400/690 Volt With lump breakercheck With motor4,0 KW, 400/690 Volt Information Mounted on framecheck With switchgearcheck Floorspace2,1x1,5 M Total height2,8 M Weight2350 KGCold mixersGebr. RubergPlastic machinery > Cold mixersBrand > Gebr. Ruberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU075B490 LocationBarneveld MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter DecanterThree phase twin drive decanter (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel Information Mounted on framecheck With switchgearcheck Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgDecantersGEA WestfaliaCentrifuges > DecantersBrand > GEA Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mo ...

Electric well dewatering pump zd 300, Compared to its big brothers, this ZD 300 has the advantage of its light weight and compactness. The high efficiency of the ZD 300 ensures enormous capacity., The sturdy, fully galvanized frame is stackable, making the ZD 300 Elektro wellpoint pump easily and safely stackable, up to 3 pumps high on a stable surface, up to 2 pumps high on a truck., A large sturdy lifting eye - centrally integrated - for easy lifting with a crane. It is also equipped with large integrated forklift socks, which make the pump easy to transport., This pump is configured as a 220 V machine., , MAX. CAPACITY 35 m³/h, MAX. HEIGHT 20 mWK, MAX. SUCTION HEIGHT 9.6 mWK, WEIGHT 480 kg, , Throughput capacity: 35 m3/h, Max. head: 20 MWK, Weight: 480 kg, , = More information =, , Year of manufacture: 2024, Empty weight: 480 kg, Connector size: 4 Cardan, Cargo space capacity: 582 l, ...

saw band length: 3660 x 27 x 0,9 mm cutting width: 0,9 mm capacity 90 degrees: square: 270 x 270 mm capacity 90 degrees: flat: 210 x 330 mm total power requirement: 1,5 kW / 300 Nm weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1400 x 1900 x 1900 mm The GERD WOLFF KMS 280 V is a precision band saw with servo drive that has been specially developed for consistently precise cutting of round material from 10- 135 mm diameter. Capacity for round material (mm) diameter 10 mm 276 pieces are possible diameter 20 mm 78 pieces are possible diameter 30 mm 36 pieces are possible diameter 40mm 21 pieces are possible diameter 50mm 15 pieces are possible diameter 60mm 6 pieces are possible diameter 70mm 3 pieces are possible diameter 80 mm 3 pieces are possible diameter 90 mm to 135 mm 1 piece is possible Feed length in one piece: 780 mm The data for this ad was created with Modu ...

year 2017 used very little only with thicknesses 8/10 Gecko 2000x60 press brake Bending press. oil. sync. GECKO mod. AD-R 2060 mm 2050x60 tons color videographic cnc DT10 latest generation two-dimensional graphics touchscreen, 4 controlled axes (Y1-Y2-X-R), multi-beam Fiessler photocells, 350 mm recess, 180 mm stroke. Press bending matrix art 3001/35/B 835 mm and punch 835 mm

Manufacturer GER Model CM 2500 CNC Year 2000 CNC FAGOR 8055 Characteristics Distance between centre 2.500 mm. Centre height 300 mm Max grinding diameter 595 mm. Max weight between centers 2.000 kg. Max weight grinding on air 350 kg. Longitudinal movement Max programable speed 6.000 mm/min. Min programable increase 0.001 mm Cross movement Max.programable speed 6.000 mm/min Min programable increase 0.001 mm. Various Max. grinding wheel size Ø 500/80 mm. Grinding wheel Cutting Speed 45 m/s Parts Holder Centre Cone C.M.6 Centre Cone Tailstock C.M.6 2 Steady Rests INCLUDED Machine weight 12.000 kg.

Description: working height: 8,100 mm incomplete Approx. Onsite Dimension. (l x w x h): 2.600 x 2.200 x 1.000 mm, weight approx.: 2.200 kg

Vegetable cutter, make Kronen, type KG - 203, year 2017, Suitable for soft and sensitive as well as hard products,, with ​3 speeds 250/350/450 rpm. -, with fine-cut disc 2 mm stainless steel,, was in action for peeled ginger bulbs,, Output: approx. 9 kg / min., - Entirely made of high quality stainless steel, - No aluminum or plastic, - All attachments can be easily removed and cleaned in the dishwasher, - Full moon shaped large hopper - less pre-cutting, - Built-in long vegetable chute, - Stainless steel cutting tools, - Processes up to 900 portions per day or 9 kg per minute, Dimensions / weight: W x H x D: 416 x 603 x 680 mm, 68 kg, bowl contents: 17.5 liters

weight max. in kg: kg dimensions: mm weight: kg height of stroke: 14,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. output: 10,800 cups/min, cup format: 2x3, with documentation, film transport, main filler, laminar air over the entire filling line, laminar tunnel from the moulded part to the film lift with laminar box, die cutter with spare die cutter, packer, Mettler-Toledo weighbridge, outfeed and high stacker, regularly overhauled.

There are two turbo compressors available, output machine 1/ 2: 8000/ 13,500 Nm³/h, with compressor, oil container and controls.

Max. load: 227kg, operational hours counter: 979h, with documentation, the machine has not been used for 2.5 years, the slewing ring makes noise when extended, the brakes are difficult to control, brakes somewhat abruptly, the batteries were renewed a few years ago, an on-site inspection is possible.

General SKU396U1165 LocationBarneveld MakeGerteis Maschinen Processingeneering AG Type1-W-POLYGRAN 250/240 No.1065 Year of construction1997 Main Features MaterialStainless steel Width230 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesdia. 240 x 230 mm Sieve sizesdia. 250 x 230 mm Sieve perforation1,5 mm With hoppercheck 50 ltr. InletDia. 315mm Motor400 volt (servo motor) With variable speed drivecheck Speed20-180 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information Mounted on wheelscheck rail system With switchgearcheck Weight520 kg CEcheck Floor space1,30 x 0,85 m Total height1,60 m Extra SpecificationsSpeed left and right 20-180 rpm, typical 75 rpm, rotation angle left and right 0/720 degrees, typical 270 degrees. Sieve granulatorsGerteisSieves > Sieve granulatorsBrand > Gerteis What you can expect  ...

FOUR-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.800 x 1500 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 30 mm, 4 + 2 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 + 2x55 kw - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.300 mm, Power: 184 kw

FOUR-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.000 x 980 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 30 mm, 4 + 2 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x11 + 2x15 kw - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.000 mm, Power: 52 kw

FOUR-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.300 x 1100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 30 mm, 4 + 2 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x22 + 2x30 kw - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.300 mm, Power: 52 kw

For self Adhesive Labels and Wet Glue Format Parts for Bottle Size 0.375l , 0,75l , 2.0l More then 300 machines new and second hand on our seema .de

Description: WOOD ROUTER CNC SPEED 2010 Very few operating hours, neat and tidy condition of the machine. Space-saving Speed 2010 model for series production of various materials. Solid wood, chipboard, fiber, composite & abrasive materials Thermoplastics & thermosets , Elastomers Specially developed for nesting applications Including the following special equipment Vacuum table - new price: 7.420, - € net Reinforced calculator - new price: 625,- € net Technical specifications Rated voltage 400 V Repeat accuracy +/- 0.1 mm Backlash +/- 0.05 mm Working speed 50-5000 mm / min Tool length sensor HF spindle HSD 2.2 kW, air-cooled incl. holder and collet set ER25 PC, mouse, keyboard, monitor in the ergonomic computer desk on the machine CAD Rhino 7.0 software package, Beamicon2 control system, CAM Estlcam V11 Gear racks, planetary gears and profile guides on  ...

grinding diameter:600 mm grinding length:2500 mm centre height:300 mm max. workpiece weight between centers:1000 kg grinding head swivellable +/-:30 ° workpiece spindle bore:42 mm spindle turning speed range:1000-1250 U/min work piece spindle speed:9-250 U/min table speeds:100-5000 mm/min total power requirement:15,48 kW steady fixed:bis 120 mm Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

material width:250 mm material thickness:0,25 - 3,0 mm no. of straightening rolls:11 straightening roll diameter:30 mm speed:6 - 60 m/min power requirement:15,0 kW weight:1,1 t dimensions (WxDxH):1,1 x 1,7 x 1,5 m striaghtening pressure automatic:hydraulic coil loof control:ultrasonic

Voltage: 230/400 V Compressor FRASCOLD type D 315 power 15.36 m3 / h Evaporator GEA Küba type DZB 071 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Type: VGL 5000. Dual-flow mixer in carbon steel design with 5.000 l. net capacity, cylindrical mixing container with conical bottom, with vertical center screw, divider arm and flow disc, rectangular connection for pocket filter, manhole, lower screw bearing with air flushing device, pneumatic flat valve at output.