gas press used for sale

GE MS5000P Nominal Pot 20.000kw each , 1600 work hours

Niigata 2 x 18V22AG Gas Generating Sets with Auxiliaries These 3-phase generators are manufactured by Niigata in 2005. Engines are V-18 type, cylinder bore is 220mm and stroke 300mm. Engines are started by air motor and they have engine driven lubrication pump. Generators are equipped with anti-vibration rubber pads. Engine rotates clockwise viewed from the generator side. Scheduled 30 000 hours’ maintenance was carried out to both engines in April 2019. Plant control system, mechanical indoor auxiliaries and MCC cabinets belongs to the scope of supply. Both units were in operation till autumn 2020 and dismantled in 2021. Techncial Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Number of gensets 2 pcs Running hours approx. 31300 / engine Rotation speed 900rpm Voltage 3450V / 60 Hz Frequency  ...

Exhaust Gas Stack Self Standing 40m Corten Steel with 3 x 900 mm Inner Pipes Good condition self-standing exhaust stack made of Corten steel, insulated and painted outside. Stack height 40 meters and it is equipped with service platform on the top, flight lights and stairs. Originally serving for Wartsila 7 MW Gas Engines which has been running only about 30 000 hours. Manufacturer Vesmeta, Finland Manufacturing year 1999 Stack height 40 m Stack outer diameter 2.6 m, with flanges 3.0 m Outer pipe material Corten E, thickness 8-4 mm Inner pipes 3 x 900 mm Corten E, wall thickness 4 mm Insulation Mineral wool 100 mm

Combined Cycle Gas Turbine Power Plant 75 MW/50 Hz – Zero Hours This equipment was delivered in 2017 by an EPC contractor who selected Rolls-Royce and Siemens as main equipment suppliers. This was a greenfield project and therefore delivery contained all equipment needed for 75 MW power plant operation, like fuel gas treatment plant, water treatment plant and complete switchyard with step-up transformers Manufacturing year: 2017 Gas turbine: Rolls-Royce Trent 60, Dry Low Nox Steam turbine: Siemens SST-300 Step up tranfomers: 2 pc Alstrom 11kV to 154 kW Complete switchyard: Siemens 154 kV Nominal output 100%: 60 MW + 15 MW Max efficiency: Single cycle 42 %, combi cycle 54% Heat recovery steam boiler: 30 bar / 300 C Water treatment: Sand and active coal filters + RO Documentation: Complete original in English Delivery: Complete plant equipment from water and gas t ...

9222022 Gas Generator CAT 4.5 Mwe and 4.3 MWe with Auxiliaries Two separate 4.5 MW and 4.3 MW / 50 Hz natural gas engine driven generating sets with auxiliaries. Manufacturing years 2016 and 2014, total operating hours 3000 and 1000 hours only. Engines are CAT CG260-16 type high efficiency 1000 rpm units coupled Marelli’s 11 kV air cooled alternator. Both units with full CAT service records, still installed and can be tested. Both units have engine cooling made with two closed loop cooling radiators, one for HT and another for LT engine cooling circuits. Equipment is close to new like condition. Technical characteristics Manufacturer: CAT, USA Manufacturing year: 2014 and 2016 Engine type: CAT CG260-16 Engine speed 1000 rpm Operating hours since new 3000 and 1000 only Alternator CAT/Marelli MJH 800 MC6, Cos Fee 1 Power output 2014 4100 kWe continuous load Power ou ...

Key data: 790 V, 1000 , 400

Deutz MWM Gas Generator TBG 620 V12 gas-fired power generators from 1998, Motor and generator on base frame. 1 available 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2, 1,000 KVA Gas engine Deutz MWM TBG 620 V12 Manufacturer: Deutz MWM Model: TBG 620 V12 Type: Gas Engine Serial Number: 2200047 Power [KW]: 790 Year of construction: 1998 Hours:– Weight of aggregate [kg]: 7.800 AC Generator Stamford PE734C2 Manufacturer: Stamford Model No.: HC I634K2 Type: AC Synchronous Generator Serial number:– Power [KVA]: 1,000 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1443 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 2513

Key data: 790 V, 1000 , 400

Deutz MWM Gas Generator TBG 620 V12 gas-fired power generators from 1998, Motor and generator on base frame. 1 available 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2, 1,000 KVA Gas engine Deutz MWM TBG 620 V12 Manufacturer: Deutz MWM Model: TBG 620 V12 Type: Gas Engine Serial Number: 2200073 Power [KW]: 790 Year of construction: 1998 Hours:– Weight of aggregate [kg]: 7.800 AC Generator Stamford HC I634K2 Manufacturer: Stamford Model No.: HC I634K2 Type: AC Synchronous Generator Serial number: 0095677/01 Power [KVA]: 1,000 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1443 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 2513

Key data: 2555 , 10500

2 x Jenbacher JMS 616 GS-N.L for sale. These 616 are 2,555 kW. The thermal heat capacity is stated at 24% as the original project was only using the engine jacket water heat. If an exhaust gas heat exchanger is added this will increase the heat output by a further 1321kWt which would increase the overall efficiency to 86% from 65%. Make: Jenbacher Model: JMS 616 GS-N.L Capacity: 2,555 KW Year: 2010 Hours: 0 Fuel: Natural gas V: 10.5KV HZ: 50 Scope of Supply: Engine, Alternator, Base Frame, Control Panel (Di.Ane XT3), HV Surge Suppressor panels, Catalyser pipe, Water jacket heat exchanger, Gas train, Gas booster, Synchronisation panel, Pumps, Other ancillaries. Please note: No container, no cooling radiator . Price: €500,000 each

Key data: 2500 , 10500

14 x MTU 20V4000 GS L64FNER Complete CHP UNIT for sale. Make and Model: MTU 20V4000 GS L64FNER Capacity: 2.5 MW Hours: 0 Year: 2023 Fuel: Natural Gas V: 10.5KV HZ: 50 Electric power cos phi 1.0 - 2536 kW Thermal power on the output - 2818 kW Power input in fuel - 5985 kW Electric power efficiency - 42,4% Thermal power efficiency - 47,1% Total efficiency 89.5% Engine cooling water temperature inlet / outlet 78 / 92 °C Scope of supply: Complete CHP unit - Engine, Alternator, Base frame, Control panel, Radiator, Exhaust gas heat exchanger, Container. Price: €1,250,000 each

We sell here a gas stove from the manufacturer MBM, type G6A77XL in a very good used and functional condition. Gas operated, 42 kW, 6 lights, completely stainless steel, workshop tested, ready for immediate use, dimensions W/D/H 110/75/90 cm, others on request.

AGILENT GC 7890B. The MOF of it is around 2016.

Immediately available used exhaust gas compensator

Key data: 140 , 400

Complete plug-and-play natural gas plant. Make and Model: MAN E2876 E312 Capacity: 140kW Year: 2016 Hours: 6954 Fuel: Nat Gas Volts: 400 V: 50Hz The plant was oversized compared to the needs of the factory in which it was located, and for this reason it was sold despite the low number of operating hours. Scope of Supply: Engine alternator control panel gas line acoustic canopy muffler air intake filter exhaust air filter and other accessories.

Key data: 2700 , 11000

These engines have been maintained by the official Jenbacher distributor. Model: J620GSE01 Year: 2001 Hours: 12,000 Fuel: Natural Gas Capacity: 2.7 MW Voltage: 11,000 HZ: 50 Scope of Supply: Engine, Alternator, Base frame, Comap Control Panels, Gas line, External cooling tables Engine cell ventilation including louvres and filters 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board Plus all other controls and cabling. Generators are installed and heated. Engines have 5,000 starts so need a service. Dismantling is the responsibility of the buyer.

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

Key data: 2000 V, 11000

Jenbacher 616 Natural Gas Generator Set. This engine has been maintained by the official Jenbacher distributor. Model: J616GSE01 Year: 2001 Hours: 14,000 Capacity: 2 MW Fuel: Natural Gas Voltage: 11,000 HZ: 50 Scope of Supply: Engine, Alternator, Base frame, Comap Control Panel, Gas line, External cooling table Engine cell ventilation including louvres and filters 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board Plus all other controls and cabling. Generator is installed and heated. Engine has 5,000 starts so needs a service. Dismantling is the responsibility of the buyer.

AVAILABLE COMPLETE CHP JANBACHER 616 - Yeard 2010 With 2500kva transformer Exchanger - CHP - PANEL - complete .

Offer 23381 Specifications: - Suitable for welding steel, aluminium special metals, Cr Ni, etc. - Welding current 400 A 50% ED - 360 A 100% ED - Welding current adjustable from 3 A - 400 A - Synergic setting control FRONIUS COMFORT - FRONIUS water cooling unit - Separate wire feeder case VR 4000 - Intermediate package device – wire feeder case 10 m - 4 rollers of wire feed infinitely adjustable - MIG - MAG hose package water-cooled approx. 4 m - Ground cable -Reducer - Mobile base frame - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 630 mm - Weight approx. 200 kg

Key data: 140

2 x MAN E2842 Syngas Generator Sets Specially-designed complete 140kW Syngas Gensets on zero hours with containers. Make: MAN Hours: 0 Year: 2015 Capacity: 140kW Fuel: Syngas HZ: 50 V: 400 Scope of Supply: Engine, alternator, base frame, control panel, gas line, exhaust gas heat exchanger, container. Engine has been inspected and is in excellent condition. The engine has been manually turned over and turns easily. Equipment has been stored indoors. Price: Please Apply

Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,

Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10

Key data: 261 , 400

Complete 2G Agenitor 406 261kW biogas generator set. We have a frame and control system along with all the other balance of plant from 2015 with 50,000hrs and a low hour block from a cancelled project with only 9,000 hours on. Agenitor 406 Power: 261Kwh Hours: 9,000 Year: 2019 HZ: 50 Voltage: 400 Fuel: Biogas Scope of supply: Engine, Alternator, Base Frame, Gas Line, Control Panel, Circuit Breaker, Heat Island, Cooling Radiator, Silencer and Cabling. Photos 1 to 4 are of the 2019 block. Photos 5 to end are of the 2014 frame.

Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 800 A -with pulse function -4-roller drive -Water cooled -Incl. Ground cable -with: removable wire feeder -Gas fitting -Hose package 4 m -Quantity: 1x device available -Dimensions: 500/1010/H1600 mm -Weight: 162kg

Schräder AWT-BP Exhaust Gas Heat Exchanger Year: 2015 Schräder AWT-BP Exhaust Gas Heat Exchanger with Internal Bypass Type: AWT - BP 20-650 8 S 10 R303 R Year of construction: 2015

Key data: 1067 KW

we are looking for a Jenbacher 3 1067 kw we have a biogas plant

Key data: 5 KW, 5 kVA, 400 V

SenerTec (Badger) CHP HKA-G S1 Electricity and heat generators from 2007, not operational, complete (closed module) 1 available 5.5 KWel, 400 V/50 Hz Manufacturer: SenerTec / Dachs Model: HKA-G S1 Type: Gas CHP Serial Number: 2240777221 Fuel: Propane II Power [KWel]: 5.5 Voltage [V]: 400 Frequency [Hz]: 50 Power [KWth] 12,5 Power [KWges] 21,3 Year of construction: 2007

The heating system includes: - Boiler Buderus Logano GE515- gas boiler 350-400 KW - Gas burner Weishaupot WG40N/1-A ZM-LN, probably built in 2010. - Diaphragm pressure expansion vessel 800 liters, manufacturer Reflex. - Storage water heater 390 litres, Buderus. - Complete control

Key data: 1950 , 2437 , 11000

Cat 3520C Gas gensets Power 1950 Kw / 2437 kVA Frequency: 50 Hz Year: 2007 20 pcs available 55.000 Working hours average

1: Gas generators MWM TCG 2020 V16 Engine Make: MWM Engine type: TCG 2020 V16 Power: 1560 KW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2005 2: Gas generators MWM TCG 2020 V16 Engine Make: MWM Engine type: TCG 2020 V16 Power: 1560 KW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2008 - To be delivered in a TOP condition or condition! - Fully functional - Can be put into operation immediately - If you have any further questions, please feel free to contact us.

Complete CHP power plant, overhaul is done at 64.000 running hours. - Generator set - Soundproof housing - Heat recovery - Exhaust system - Exhaust cleaning (COditheen) - Silincer - Oil tanks - Control system (Diane xt) - Pumps and pipes In perfect running condition. GAS POWER HOLLAND infogaspowerholland

Gasket kit, Seal Kit CAT PUMPS 31039 for models 3520, 3521, 3527 34-piece New ! Dimensions (packaging): 270 x 130 x 45 mm

Key data: 9700 , 11000

Wartsila 20V34SG complete Gas Power plant 9.7 MW 50 Hz 11K Volts Year of make 2011 45.000 Working Hours Maintanence done regularly by wartsila 20V34SG engine with all auxilaries: ABB AMG 1120LT08 Alternator, compressors, Lt Ht water tanks, LV MV HV step up Transformers, control panels, Unic control system, radiators, maintanence tanks, 2 x Napier 357 turbochargers, safety spares, Caterpillar emergency generator,Natural Gas Regulator Unit, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Complete Genset, 0 hours after M6 maintenace, damaged crancksahft. (new bearings, liners, renewed turbochargers, renewed cylinder head, new main, pilot gas valves. Lot of spare parts available.

Cutting size 6mt x 2mt Hiperterm HD 30/70 generator Thickness from 1mm to 15mm stainless steel up to 12mm New control updated in 2020 with € 15,000 of expenditure

Plasma cutting table Brand: SAF / Airliquide / Oerlikon Model: Plasmatome 20 Useful cutting capacity: 2000x6mm It has rails to expand the cutting length from 6000mm to 8000mm AZURMATIC Aspiration Table of 2000x6000mm (2 modules of 2000x3000mm) CNC: BURNY 3.5 DIGISAF Complete CNC manual available. Includes computer with the Lantek CadCam and the license backpack. Plasma generator: - Brand: Nertajet - Model: HP120 - Torch: OCP 150 - Cutting capacity:  Carbon Steel: 15mm  Stainless Steel: 15mm  Aluminum: 20mm Equipment description: - It has height control - Double motorization in the portico - Movement speed: 10m / min

Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Wartsila 34 SG V18 charge air cooler, intercooler, combustion air cooler. Overhauled cleaned, pressurtested for sale. Excellent condition.

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Price: Please Apply

CVP A200 bulk gas flush machine Power: 3 Phase

The machine is in good technical condition. Maximum table size: 12000 x 2500 mm Maximum sheet thickness: 25 mm (plasma torch) Maximum drilled diameter: 30 mm (drilling unit) Filter device EKOFAN N8-10600 Software program for creating cutting plans AsperWin MSNC 500 control system Plasma source Kjellberg HiFocus 280i Compressor GA5 FF-13 EUR 400+N 50 TM CE Atlas Copco By prior arrangement, the possibility of a tour in progress.

Suprarex 3500 (width 3500mm) with plasma M3 of the second generation (G2) and with WIC (water clearance for the possibility of cutting under water). The machine was bought mainly for cutting stainless steel. Of course, it can also cut carbon steel or aluminum (it can only be cut separately). Basic consumable parts for the burner are also included. The machine was practically never used and cut for a total of 1 hour (started up and tested).

Year of Manufacture: 2015 Location: Czech Republic Description: Machine in good technical condition, possibility of testing after agreement. Technical parameters: cutting range - steel 12mm, Al 6mm gas - O2, N2, air laser power - 2kW max. sheet size - 1500 x 3000mm ejection of material and blanks - manually, 1 table online monitoring of cutting Wrykrys software for creating firing plans . Accessories: compressor and filter. unit.

The machine is in good technical condition, it is possible to test it by agreement. Type P 2000 adapted to a removable grate and waste tub. The original machine had an inadequate water bath. The removal of flue gas is therefore via additional extraction. A simple and functional machine for locksmiths. The machine including the Alfa In Pegas 101 CNC aggregate, the control PC (where there is a sheetcam program for creating tool paths), a set of consumables for the machine torch. The PC has a monitor, keyboard and mouse. Tables for burning different material thicknesses have been tested on the PC. It is possible to burn steel, aluminum and stainless steel from a thickness of 0.5-20 mm. Working area: 1000x2000mm Active wasps Z Control software: Mach3 X/Y/Z guide: HIWIN HGR20 Drive: Nema23 stepper motors - 2.8Nm Maximum speed: 12000mm/min Construction: Solid welded Dimensions: 1600x2400x1000m ...

The machine is in good technical condition, after agreement the possibility of testing. ALFATEC CNC compact plasma 2m x 1 m, PEGAS 100 PLASMA CNC, Torch S 125 10m PEGAS 100 Plasma machine, WRYKRYS - technological program. Dimensions: length 270 cm, width 200 cm, table height 80 cm, height including control panel 170 cm, weight 940 kg.

Machine Type: Electrode Inverter Welding Rectifier Brand: Merkle Type LiteARC 160 Connection voltage 1 x 230 Volt Serial No. 127.931 Adjustment range 15 – 160 amps Duty cycle 25% ED at 150 amps 60% ED at 90 amps 100% ED at 80 amps Infinitely variable current adjustment max. weldable material thickness 4 mm Cooling inverter by built-in fan Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 3 years Optional Accessories Carrying Strap Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece of ground cable 1 piece of electrode cable 1 piece of slag hammer, heavy-duty version 1 piece steel wire brush, 2 rows 1 piece mains plug 230 V, solid rubber 20 rod electrodes in 2.0 x 250 mm  ...

BIO GAS GENERATOR BRAND : GE JENBACHER MODEL : 620 YEAR : 2009 CONDITION: IN EXCELLENT CONDITION ONLY 500 HOURS OF OPERATION 1500 KW

gasket kit damper / KPL XOMOX CRANE 080/16 ISO - 81 for high-performance butterfly valve 800ISO Nominal diameter: DN 80 pressure rating: PN 16 seat material: Firesafe Shaft seal: graphite New ! Dimensions (packaging): 120 x 120 x 20 mm

gasket kit damper / KPL XOMOX CRANE 080/16 ISO - 00 for high-performance butterfly valve 800ISO Nominal diameter: DN 80 pressure rating: PN 16 seat material: PTFE shaft seal: PTFE New ! Dimensions (packaging): 120 x 120 x 20 mm

gasket kit damper / KPL XOMOX CRANE 100/16 ISO - 81 for high-performance butterfly valve 800ISO Nominal diameter: DN 100 pressure rating: PN 16 seat material: Firesafe shaft seal: graphite New ! Dimensions (packaging): 160 x 145 x 20 mm

gasket kit damper / KPL XOMOX CRANE 150/16 ISO - 00 for high-performance butterfly valve 800ISO Nominal diameter: DN 150 pressure rating: PN 16 seat material: PTFE shaft seal: PTFE New ! dimensions (packaging): 200 x 200 x 20 mm