gas machine used for sale

Manufacturer: CATERPILLAR Model: G3516B LE Type: Stationary to Gas Working Cycle: 04 times water cooled Nominal Rotation: 1,800 RPM Number of Cylinders: 16 Cylinders, arranged in V Piston diameter --mm: 170 mm Piston stroke -mm: 190 mm Engine Volume: 69 Liters Compression Ratio: 11.1:1 Suction: Turbocharged, Post-Cooled Fuel System: Electronic Ignition System Quantity: 02 units

general overhaul through Jenbacher:

Available in stock 1 x Used AVK Flanged Gate Valve DN150 PN16. The equipment is used but in good working conditions. Temperature Range: -20ºc to +60ºC

Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Available in stock 1 x Used Madas Gas Filter DN100 PN16. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. Environment Temperature: -15ºC to +70ºC Maximum Working Pressure: 2 bar

Available in stock 1 x Used Bohmer Kugerlhahne Gas Ball Valve type FSK V 016.065 with Filter and Dungs Differential Pressure Switch GW 50 A4. We also have other elements of the gas train available, namely: 1 x Gas Pressure Regulator DN65 PN16 2 x Solenoid Gas Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Pressure Switch Maximum Operating Pressure: 500 mBar DN 65 PN 16

Available in stock 3 x Used Capstone Gas Pressure Regulator. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Max Inlet: 250 PSI

Available in stock 4 x Used Capstone Gas Fuel Manifolds. Most commonly used for Microturbines C30. All of the manifolds are complete with premix solenoid (P/N 507033-001). The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 6 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...

EKU 750-6-1 6 burner gas stove 39 kW 6 burners 39 kW total power Stand-alone unit W 1200 x D 750 x H 850 mm open substructure More gas stoves in other sizes - new and used - can be found in our shop! International shipping costs on request!

EKU PXL 80M Lava stone grill EKU PXL 80M Lava stone grill Stand-alone unit Height-adjustable stainless steel V-grill grate W 800 x D 750 x H 850 mm 2 heating zones Piezo ignition Substructure open V-rust 17 kW Gas More lava stone crickets in other sizes - new and used - can be found in our shop! International shipping costs on request!

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000

Engine Make MWM Engine Type TCG 2020 V16 K Power KW 1500 KW RPM 1500 Fuel Natural Gas Volts 400 Hz 50 Year of Manufacturing 2011 Running Hours 0 NEW GENERATOR SET

Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000

Engine Make MWM Engine Type TCG 620 V16 L Power KW/RPM 1358 / 1500 Fuel Gas Volts 400 Hz 50 Year of Manufacturing 1997 Running Hours

COMPLETE POWER PLANT OF 16 MEGAWATT 4 pieces MWM 2032V16 Year of manufacturing 2011 Running hours: #1 at 18607 operating hours #2 at 12261 operating hours #3 at 17068 operating hours #4 at 19206 operating hours Scope: Generator sets Control panels Gasline Pumps Heat exchanger Tranformers Break panels Silincer 00316 38 63 90 71 GAS POWER HOLLAND

We have to sell Low voltage Engines for explosive gas atmospheres are with us on site, we offer transport at this price in Polish, abroad you have to call and ask about the cost. The engines are from 2018, but still originally packed was purchased as a spare part. More information about the engine is in the last picture. The price is for 1 piece, for the purchase of two we do an extra discount. Worth!

LPG forklift, gas forklift STILL type RX 70-16T Series No. 517314G00021 Year of construction 2016 Nominal load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Fork carrier width 980 mm Construction height 2160 mm Total width 1100 mm Total length without forks 2200 mm Net weight 3040 kg - Triplex mast with full free stroke 1550 mm - hydraulic side shifter - LPG electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - hydraulic auxiliary steering - front work light- reversing - warning light (blue) - rear hazard warning lights (yellow) - 4-wheel super elastic, solid rubber - front tires 18X7-8 SE / rear 18X7-8 SE - according to operating hours counter 22663 operating hours - New TÜV-UVV test good condition; used

Key data: 736 , 400

2 x Jenbacher 316GS BO3 Natural gas Generator Set Model: Jenbacher 316GS BO3 Fuel: Natural gas Year: 1996 Hours: 41,000 and 42,000 Capacity: 2 x 736 kW HZ: 50 Voltage: 400 V Scope of supply: Engine, alternator, heat exchange system, full installation including transformer and electric power component. General Information: The engine has been serviced by Jenbacher. Available for Sale Now. Price: Please Apply

Engine Make MWM Engine Type TCG 2020 V20 Power KW 2000 KW Power Output 1983 KW RPM 1500 Fuel Natural Gas Generator Model Marelli MJH 630 LA4 Volts 10000 Hz 50 Year of Manufacturing 2018 Total Running Hours 0 brand new, directly available

Engine Make CATERPILLAR Engine Type CG 170-20 Power KW 2062 KW RPM 1500 Fuel Natural Gas Generator Model Marelli MUH 630 LA4 E20 Volts 11000 Hz 50 Year of Manufacturing 2018 Total Running Hours 0 BRAND NEW DIRECTLY AVAILABLE 3 PIECES

Brand Deutz Model: Gas generator set 1460 kVa Year of construction: 2001 Serial number: 69886750152 Capacity (KvA) 1460 Capacity (Kw) 1168 Engine brand Deutz Engine model TBG620V12 Motor capacity (Kw) 1050 Fuel Natural gas Alternator Brand Stamford Alternator Model HCI734F2-CG Voltage 400 - 231 Frequency (Hz) 50 RPM 1500 Amperes (A) 2107 Dimensions LxWxH (mm) 4700 x 1600 x 2600 Weight (kg) ca 10500 Number of stucco in stock 1 Made in Germany Comments Low hours builded out, no electric panel, no cooler, will be sold in present condition

Brand Deutz Model: Gas generator set 1460 kVa Year of construction: 2001 Serial number: 69886750151 Capacity (KvA) 1460 Capacity (Kw) 1168 Engine brand Deutz Engine model TBG620V12 Motor capacity (Kw) 1050 Fuel Natural gas Alternator Brand Stamford Alternator Model HCI734F2-CG Voltage 400 - 231 Frequency (Hz) 50 RPM 1500 Amperes (A) 2107 Dimensions LxWxH (mm) 4700 x 1600 x 2600 Weight (kg) ca 10500 Number of stucco in stock 1 Made in Germany Comments Low hours builded out, no electric panel, no cooler, will be sold in present condition

Complete 96 MWe gas fired black start/ peak load power station, consisting of 4 (four) GE Frame 5N Gas Turbine Sets 24 MW each. Each set consists of a: • Gasturbine • Generator • Diesel Engine • Main Gearbox • Auxiliary Gearbox • Speedtronic Mark II control system • Exhaust plenum • Air inlet filter house 125 MVA transformer With or without building. additional info on request.

BERGEN BRM GASKET KIT, CYLINDER HEAD MAINTENANCE KIT, O-RING KIT AVAILABLE IN OUR STOCK. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Sell a used natural gas / biomethane CHP 500kw, Year of construction 2016 Operating hours: 4500 engine: Liebherr G9512 Generator: Stamford HCI 634 Container: l. 12,20, b. 3,20m, h. 3,30m Control: Motortech Aprovis exhaust gas heat exchanger, GEA intercooler, supply & exhaust air backdrops... + EEG contract 2006 Biomethane very good condition

(1) Gas (2) Fuel (3) Electric: 2   Temperature maximum: 1050 C° Capacity (kg): 5000 kg Connection 3 x 250 Amp Power 200 KW Driven loading cart with 5000 Kg capacity Temperatur 50 - 1050 Gr Celsius Heater heatmasters 2 chanells with 12 elements (AF3.25 wire) Control HM-1000 Controller HM-Rigel Version 2.2b (T) Insulation ceramic wood / fibre 200 mm For Stress relieving, annealing, normalizing, heat treament Length:3650mm Width:2545mm Height:4500mm Weight:4400kg INDUSTRIAL FURNACES  ;Furnaces are used in many industries to produce a wide range of products under demanding requirements.  this extensive design and manufacturing capability in thermal processing equipment is the solution for your high temperature furnace requirements.  with wide assortment of furnaces, including Continuous, Batch, Car Bottom, Solution Heat Treat and Atmosphere. & ...

Arc welder Type: Euromag 35-2 Manufacturer Messer Griesheim

Arc welder Manufacturer: Oerlikon Type: Minicito

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Complete Containerised Trigeneration Tedom Genset 130kW Natural Gas. Fuel: Natural gas Year: 2017 Hours: 12,000 Capacity: 130 kW HZ: 50 Voltage: 400 V Scope of Supply: Engine, Alternator, Frame, Control System, Gas Line, Absorber, Cooling Tower, Water pumping system. Available for Sale Now.

MAN E0826 E302 Natural Gas Generator Set for sale. Model: MAN E0826 E302 Fuel: Natural Gas Year: 2004 Hours: 200 Capacity: 65 kW Hz: 50 Voltage: 400 V Scope of supply: Engine, alternator, acoustic canopy with panels, exhaust gas heat exchanger and other accessories . Price: 25,000€

Achievement: 280A at 40% 230A at 60% 175A at 100% Wire feed: 1 - 20 m/min. Equipped with: - Sweat pack - Massa cable - Gas valve - Automatic welding helmet -Operating instructions Machine LxWxH: 1000 x 565 x 900 mm Machine weight: 145 kg

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

Hello all We have in our stock in Turkey 1 unit Caterpillar 3516 containerised gas generator system İn good condition 1070 Kw in 1500 RPM please email us at infofin-marine fin-marine

offer 22686 Specifications: - Welding current 300 A 40% ED - 240 A 60% ED - 180 A 100% ED - Welding current adjustable 10 A - 300 A - Digital volt + ampere display - 4 roller wire feed infinitely adjustable - 2 stroke - 4 stroke - regulation - Eco Pulse Front Panel with various welding settings - water-cooled hose package approx. 4 running meters - Ground cable -Reducer - Water chiller unit - Connection 400 V / 32 A / 18 kVA - Space requirement approx. W 450 x H 1200 x D 1050 mm - Weight approx. 80 kg

HP Fuel gas Compressor RC10K -11/351 for power plant Wartsila

Key data: 9000 , 6000

9MW Wärtsilä W20V34GS Natural Gas Engine Generating Set. Hours: 17,450 Year: 2007 kW: 9000 HZ: 50 V: 6000 Fuel: Natural Gas Complete plant with: Engine, Alternator 750 RPM, Frame, Control System, Gas Line, 2 Radiators, 2 Cooling Towers, Synchronization Panels, Switchgear, Transformer 6,000V / 20,000V. Other accessories as in the photos. Service done at 16,000 hours. Available for Sale Now

Engine Make SCANIA Engine Type Schnell 6R20.1B Power KW/RPM 265 / 1500 Fuel Gas Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2014 GAS POWER HOLLAND 00316 38 63 90 71 (whatsapp)

Engine Make JENBACHER Engine Type JMS 616 GS-N LC Power KW 2433 RPM 1500 Fuel GAS Generator Model AVK Generator Power 3760 kVa Volts 10500 Hz 50 Year of Manufacturing 2008 Running Hours 48312 GAS POWER HOLLAND 00316 38 63 90 71 FULL MAINTENANCE HISTORY AVAILABLE

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000 GAS POWER HOLLAND 00316 38 63 90 71

Engine Make JENBACHER Engine Type JMS 420 GS – NL C Power KW 1412 Power Output 1451 RPM 1500 Fuel GAS Generator Model STAMFORD Volts 400 Hz 50 Year of Manufacturing 2005 Running Hours 36.000 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Engine Make MWM Engine Type TCG 620 V16 K Power KW/RPM 1358 / 1500 Fuel Gas Volts 400 Hz 50 Year of Manufacturing 1997 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Engine Make JENBACHER Engine Type JMS 420 GS -A 02 Power KW 1415 Power Output 1451 RPM 1500 Fuel GAS Generator Model Stamford Generator Power 1935 KVA Volts 690/400 Hz 50 Year of Manufacturing 2006 Running Hours 29158 GAS POWER HOLLAND 00316 38 63 90 71 whatsapp

Engine Make MWM Engine Type TCG 2020 V16 K Power KW 1500 KW RPM 1500 Fuel Natural Gas Volts 400 Hz 50 Year of Manufacturing 2011 Running Hours 0 NEW GENERATOR SET GAS POWER HOLLAND 0031 6 38 63 90 71 WHATSAPP