fuel oil engine used for sale

Filter device for hydraulic oil Oil pump, Oil filter, Brand: Hydraulic equipment Vertriebsgesellschagt mbH Other details: Please see photos All information without guarantee

TO WHOM IT MAY CONCERN ; WE VE GEA WESTFALIA OIL SEPARATORS OSD 6 WITH BELOW EQUIPMENTS AT OUR STOCK PLS FIND DETAILS ON BELOW --TYPE OSD6 - 91 - 067 / 3 & OSD -91-067 / 6 YOB 2006 SERIAL NO 9037-463 & 9038 - 150 BOWL SPEED 12000 VOLT 380VOLT FREQUIENCY 50Hz --ELWA HEATER TYPE 5609-V kW 12 BAR 6 -- TRANSFER FEED PUMPS --CONTROL PANELS EX STOCK READY TO DELIVER. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

New oil tank 100,000 liters for sale. Above-ground heating oil tank system 100,000 litres, D=2,900 mm Above-ground tank systems from Dehoust according to EN12285-2 (CE), class B, tank type D, for heating oil. Cyl. Storage tank made of steel, double-walled, with filled control liquid Glymin NF (approval no. BAM 1.4/12481-5.1/6035). Standard with a Dom DN 600 with dome cover, gasket and screws. Container inside raw, outside all parts sandblasted and with simple primer. Incl. synthetic resin paint on the outside in RAL colour. Complete tank system equipped with: - welded-on saddle feet - optical leak detector type LAS, approval no. Z-65.24-381 including Test and control liquid for refilling. (up to Ø2000mm pre-assembled) - Tank fitting for heating oil (pre-assembled up to Ø2000mm), consisting of: Filling tube 2" with TW closure Suction combinatio ...

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

New Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

Used and overhauled Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

3,000 litres of above-ground, galvanised waste oil collection container and for other liquids of hazard class A3 (e.g. glycol/antifreeze, etc.) Pick-up or delivery possible. Complete system, but without overfill protection

Waste oil collection tank 950 litres approved for liquids of hazard class AI-III With test certificates State: Technically deficialy Optical: According to age

Various above-ground, double-walled tanks in sizes 5,000 / 7,000 / 10,000 / 20,000 litres Diameter 1,6000 and 2,000 mm

Item Combined duo burners, gas and oil operated Fabr.: Steinmüller, type 1: G-18-K 1120/800, type 2: DAG-18-K 1120/800, y.o.m.: 1996, Burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1,500 Pa, exhaust temperature 424 degrees, (8 units), Burner data Duo oil burner: calorific value 42MJ/kg, heating oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner working area 1:5, max. Oil pressure on the takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burners must be dismantled by the customer. The burners can also be purchased individually.

Recon oil cooler ready to ship

Recon and used immediately delivery

Ready to be delivered immediately

Recon in stock and also available in used

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...

Used oil collection container -Container: Ø 660 x 1250 mm -Container: tiltable -Own weight: 30 kg

Radial piston motor, hydraulic motor, oil engine, hydromotor CALZONI / SPERRY VICKERS / IAM Bery7zxqmc dimter DKV III, dimter DKV 3 dimter DKV V, dimter DKV 5

Oil-water separation system / separator, for compressors KT06 000 01 Replacement filter: XV KT06 AF2

release agent spray unit Electr. connection: 400 V 3-ph, 16 A Compressed-air connection:6 bar, oil-free Working pressure:0,1-0,5 bar renovated

Recon 944768/20-2123 Draw B20-10-164 10bar shell/5bar tube Test 15bar-7.5bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon 994730 Built in 1994 1941/2200 l/min 400/450 L/min 10bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Emulsion fission system, oil-water separation system (for the de-oiling of condensation in compressors) The cost-effective and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. that cleaned water complies with the legal Rules on channel discharge

The NOVOTECNIC EUROPA FTD-6 E-39 oil mist separator was built in 1992. Technical parameters: - capacity: 2000 l - nominal filter capacity: 500 l / min - filter unit:> 0.003-0.005 mm - connection power: approx. 15 KW - machine dimensions (L x W x H): 4000 x 1200 x 2800 mm - weight: approx. 2000 kg

Product number: 1993B Type: GoldFryer TBM630/5000TH Serial number: 10050409 Year of construction: 2005 Belt width: 630 mm Frying length: 5000 mm Heating: thermic oil Power: 3 x 400V, 50Hz, 11kW Dimensions: 9100 x 1900 x 2900 mm Teflon infeed, hold down belt, circulation pump, electric hoists, oil level control, CO2 fire surpression system

Bottling Line for OIL • Speed: 1.000 Bph • Direction: Clockwise • Filling Monoblock COSTEC • Model: SRV 9.8.1 • Year: 1999 • Rinser 9 clamps • Fixed nozzle • Type treatment: Single, With Air • Filler 8 Valves • Type of filling: Volumetric • Capper Single head • Type of cap: Screw cap 31.3x24 • Capsuler ENOS • Year: 2004 • Pvc capsules • Plateau capsule distribution • Labeller OXE • Year: 1999 • Model: QUASAR • Number of heads: 4 • Number of stations: 2 • Type of label: Adhesive • Application: • Front label • Back label • Accumulation table • Safety protections

An original sealed 208 liter barrel with gear oil is offered. Manufacturer Totoal Type Fluids GIII Applications Synthetic lubricant for gearboxes and hydraulic systems, if a GM Dexron® III fluid is prescribed. Specifications Total Fluide G 3 MB release 236.9 Volvo 97341 MAN 339 Type Z1/V1/L1 Voith 55.6335.35 ZF TE-ML 04D, 09 (except car steering systems with ZF vane pumps), 11B, 14A Dexron® III G, III H Ford Mercon Allison C4 The barrel is originally sealed!

- Lubricat. oil pump oil pump MWM 12304041 - Suitable for several motors - Please note! Price per piece! - 12304041 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and i ...

Oil Pump Oil Pump MWM 12319313 -for various MWM motors - 12520952; 1252-0952; 1252 0952 - Predecessor 12319313; 1231-9313; 1231 9313 ; 12152706; 1215-2706; 1215 2706 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engin ...

- Oil line oil pipeline MWM 12302232 - Suitable for several motors - Please note! Price per piece! - 12302232 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

- Oil cool oil cooler 12302852 MWM - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new techno ...

- Oil line MWM 12303498 - Suitable for several motors - Please note! Price per piece! - References -> 12303499 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

- Oil level control MWM 12480505 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technolo ...

liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 , 10 , 11

BOGE screw compressor S 100-3 air-cooled Ready-to-use, automatic, with CE mark Specifications Effective delivery quantity of the entire system measured according to ISO 1217, Annex C 11.00 m³/min at maximum compressor overpressure 10 bar Nominal power main drive motor 75.00 kW Nominal power fan motor 2.20 kW Degree of protection/insulating material class of the motor IP 55 / F Operating voltage (compressor) 400 V / 50 Hz Control voltage (compressor) 230 V AC / 24 V DC Intake or ambient temperature (min... max) +5...+40 °C Compressed air outlet over intake temperature (at compressor) 12 K Cooling air volume flow (with duct connection) 9200.00 m³/h Residual oil content of compressed air < 3 mg/m³ Soundproofed design (according to dimensional drawing): M 3200.0970 Sound pressure level (according to DIN EN ISO 2151) 80 dB(A) Width / Depth / Height 2 ...

Extraction system for wall mounting Manufacturer Plymoth Special electrostatic precipitator system without paper filter! Type EFO5000 Electrostatic precipitator, function via electrical charging of dust particles. Used to extract oil mist. Details according to photos. Special price

Pressure: 10 bar Motor: 90 kW Free air delivery: 13,01 m³/min Measurement (WxHxD): 2880 x 1959 x 1295 Weight: 3336 kg Compressed air connection: DN 65

Pressure: 10 bar Motor: 5,5 kW Free air delivery: 0,668 m³/min Measurement (WxHxD): 1858 x 1604 x 760 Weight: 392 kg Compressed air connection: 1/2

Pressure: 10 bar Motor: 5,5 kW Voltage: 400 Volt / 50 Hz Free air delivery: 0,648 m³/min Measurement (WxHxD): 1012 x 784 x 804 Weight: 225 kg Compressed air connection: 1

Pressure: 15 bar Motor: 4 kW Free air delivery: 0,45 m³/min Measurement (WxHxD): 1890 x 1418 x 795 Weight: 321 kg Compressed air connection: 1/2

Pressure: 10 bar Motor: 4 kW Free air delivery: 0,461 m³/min Measurement (WxHxD): 1890 x 1418 x 795 Weight: 321 kg Compressed air connection: 1/2

Floor dimensions: 3,000 mm x 22,000 mm ; complete mesh tape; Baking area: 132 m²; Temperature regulation: separate for upper and lower level; Temperature zones: 2; incl. jacks front and rear; incl. loading conveyor: 4 x 3 m (LxW); Boiler: KO 500; Power: 465kW; permissible operating overpressure: 10 bar; permissible operating temperature: 300°C; incl. 2 thermal oil boilers; Dismantled

Oil-bath gearbox IMA Type: 04.015

There are two identical Viessmann Paromat-ER-ND available, nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.

Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.

There is one KV-2,5/25 and one KV 1,6-2/25 available, power machine 1/ 2: 2907/ 1745kW, year of construction machine 1/ 2: 1988/ 1979, there is also a chimney available.

Recon Part Number: 1217 4852 (6.441.0.730.012.6) Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

RECON Part Number: 1216 8348 6.420.0.940.006.7 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

NEW Part Number 1227 7152 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

RECON Catalogue Number: 4.01.102-04 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

RECON Part Number: 103178 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.