frame 6 rotor used for sale

Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long

RECON Part number: 0205 6280 Ring groove 1&2: 0,50mm oversize ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

P2 - used 40 m³ / 40,000 litres steel tank, double walled, above ground or as underground tank, on 2 steel bases, in good condition. dimensions: diameter approx. 2.5 m (without base) length about 8.90 m height incl. base approximately 2.78 m base width approx. 0.90 m Stainless steel tank DIN6616 D, double-walled, inside plain steel, 2 steel bases. Former isopropanol tank / chemical tank. On request this tank can be refitted for ground installation with a bitumen coating on the outside. The container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, nutritional oil, as rainwater cistern etc. Price upon request. Item location is 79098 Freiburg im Breisgau. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, feel free to ask us. It is not possible to update all our advertisements daily. Sinc ...

Pump station VR 0632 B consisting of: 2 pieces rotary vane vacuum pump circulating Manufacturer: Busch Type: R5 RA 302 D Transferables: Mineraloil Delivery time: ex-stock; ready for use

Rotary vane vacuum pump single-stage Status: Generalueberholt Gewawting capacity: 12 months Manufacturer: Leybold Type: Sogevac SV 65 Kat. No.: 10906 Engine: 400V equipment: mineraloile nominal suction glit: 65 m3/h Final pressure: approx. 0.08 mbar (abs.) Zubehoer: operating instructions, oil filling (mineral oil) delivery time: ex works; ready for use

We offer a retractable gravity conveyor for sale. It has minimum dimensions 2218 mm 8735 mm max. Width 610mm Technical data: Length retracted: 2218 mm Length extended: 8735 mm Width: 610mm Height: adjustable from 730-1040mm Rows of rollers: 67 units maximum load capacity: 400kg / M Net price: â?¬2050 / piece

Rotary vane vacuum pump lubricated Manufacturer: Busch Type: R5 RA 0630 B Status: Maintained, very good condition, used Performance: 6 months suction valves: 630m3/h solvent: mineraloil

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 0630 B Status: Waiting, very good condition, second-hand Warranty: 6 months suction capacity: 630 m ³/h Beriebsmittel: Mineral oil Accessories: inlet filter Delivery time: In stock; ready for operation

Pump station VR 0632 B includes: 2 piece rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 302 D Beriebsmittel: Mineral oil Delivery time: In stock; ready for operation

Axles: 6 Control: IRC5 type: M2004 Load: 180 kg Distance: 2550 mm Year of construction: 2011 Condition: Used, removed functional from the production

Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050

Transport Tapes Fabr. Bertram Model ZLS 4 Type 40/600 Y.O.M. 1996 Length 600 cm Width 40 cm with electric drive motor

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 60,000 litres Diameter: approx. 2,500 mm Length: approx. 12,680 mm Weight: approx. 10,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Included in delivery: 01x C-Profile, used Material color: sendzimir galvanized Total length: approx. 5,605 mm Profile abbreviation: C 200 x 80 x 35 mm Material thickness: approx. 2.00 mm Hole diameter: approx. 13 mm Weight / pcs approx. 38,75 Kg Note: - Since these are used goods, damage, Holes, welds, etc. rust deposits may be present. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shel ...

1,500 m² Nedcon mezzanine Column grid 800 cm x 600 cm! Used goods, top condition, as good as new, see pictures Height of the upper edge of the stage 370 cm Load 500 kg/m² Flooring different finishes available. Cargo lifts, stairs, railings and accessories sufficiently available CAD planning and assembly possible Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-c ...

In good condition and ready to ship

Seesaw with belt conveyor, approx. 5,65m - used - : Price per piece: 1.250.-€ (net), dismantled and loaded! (BF 3160) Manufacturer: Van der Lande Year built: unknown - probably 2008 Element width: approx. 75cm, Strap width: approx. 60cm Length: 2.55m plus 3.10m Total length approx. 5.65m Element height: approx. 18cm With pneumatic cylinder Overcomes a height difference of approx. 70cm The belt is slightly ribbed on one side

Technical data: Bandwidth / strip width min. 150mm Bandwidth / strip width max. 1,650 mm Strip thickness min. 0.4 mm Strip thickness max. 400 N/mm² 2.5 mm 300 N/mm² 3.0 mm Coil weight decoiler/ coil weight decoiler 12,000 kg Coil outer Ø / coil outer-Ø 1,600 mm

Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978

RH143 Spec 35209 01110 03210 62113

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 1500mm Length extended 4000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 4 pieces Other lengths available in stock: 8 and 10m Shipping worldwide Price per piece 4.100€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3800mm Length extended 10000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 8m Shipping worldwide Price per piece 8.500€ net plus VAT If you are interested, please contact us to confirm availability.

Ajan PP 260A 2000 mm x 6000 mm pla 260 Amper Pipe cutting preparation Machine is in good working condition

Baykal APHS 31120 CNC Press Brake with 620 hours! Machine is in excellent condition Working hour : 620 Control Unit : CYBELEC ModEva 15T Motorized crowning

Press form Box 600400280 (meat) Wear 10-15% along the lines of closure there is a small flash

Press mould Box 600400200 (vegetable), wear 70%, part of the perforation and the closure line is filled with material.

Baader 694 ID.NO. 2153 Baader 694 Bone / Cartilage separator for fish, meat, and poultry. 2mm drum previously used in the fishing industry. Older simple mechanical machine that just works. Dimensions 110 x 80 cm H 160 cm.

High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro300-6: -Six 1100W direct drive electrical motors. -Very large 300l air tank. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 6x1100(6600) Motor speed, Rpm: 1440 Air supply, L/min: 1260 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 85 Air tank, L: 300 Dimensions(length x width x height), mm: 1650x450x850 Weight, kg: 173 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1720x490x920 Weight, kg: 205 Tracking: Available -Price is with VAT 21% included. Contact us if you  ...

Used Sigma Profile S 160 Side Carrier Plins Steel Beam Length approx. 2.620 mm - 160x60x2mm Properties: - Length: 2,620 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 2,620 mm Information without guarantee You can pick up this item by arrangement in our warehouse in Krefeld. Of course, we also deliver the article to your home. We will be happy to make you an offer. Please understand that we cannot give you any shipping costs without stating the postal code of your delivery address. We work with several carriers, each serving different routes. Your advantage: This allows us to achieve the lowest transport price for you. Please request this before purchasing.

Used Sigma Profile S 160 Side Carrier Plins Steel Beam Length approx. 1.670 mm - 160x60x2mm Properties: - Length: 1,670 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,670 mm Information without guarantee You can pick up this item by arrangement in our warehouse in Krefeld. Of course, we also deliver the article to your home. We will be happy to make you an offer. Please understand that we cannot give you any shipping costs without stating the postal code of your delivery address. We work with several carriers, each serving different routes. Your advantage: This allows us to achieve the lowest transport price for you. Please request this before purchasing.

A rotating frequency generator generates 60Hz alternating current from 50Hz alternating current. In good condition. The device can be converted into a diesel generator. Manufacturer: YAMADA DENKI CO LTD Type: RFC-3543E; Series: 80155 Power: 350 kVA Input: 415 V; 50 Hertz Output: 415/215 V; 60 Hertz Operating hours: 3624 h Electric motor: AM-355 W; 350 kW; 415 volts; 546A; 50 hertz; 1500 rpm Synchronous generator: M3834; 400 kVA; 415/210 volts; 60 hertz; 1400 rpm

RAKO Euro container blue 600x400x325 and 600x400x170 (lengthxwidthxheight) Over 10000 pieces per variety directly available. Simply pass on the required quantity, graduated prices possible! Very good and clean condition. Shipping per full pallet (32/56 pieces) possible, possible for an extra charge. Price net per container, plus VAT Cf9uhnejcv Minimum order 600x400x325 = 32 pieces! and 600x400x170= 56 pieces.

P332 - used approx. 81.6 m³ / 81,600 ltr PE100 tank, plastic tank, flat bottom tank, single-walled. technical details: capacity: approx. 81.6 m³ / 81,600 litres material: PE100 tank, plastic tank manufacturer: Weber Kunststofftechnik year of construction: 2016 dimensions: approx. Ø 4.00 m × approx. H 7.00 m specific weight: at least 1.0 kg/ltr Used PE100 tank, professionally cleaned and in great condition, almost as new, some are completely unused. Single-walled, above-ground storage tank, standing on flat floor. Lid on top of the roof and on the tank wall, several inlets and outlets, impervious to light. Former water tank, suitable for many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been ...

Batch intensive mixer with a maximum batch capacity of 1,250 l. / 3,600 kg, equipped with: Drum drive 22.0 kW (drum speed: 8.4 rpm), mixing star drives 2 x 22.0 kW (mixing star speed: 39 rpm), hydraulics power pack for discharge gate 3.0 kW, lubrication pumps 2 x 0.18 kW. Previous use: Production of ready-mixed concrete.

Screen bucket 355mm unused Manufacturer Haener Model HSL280 MS03 ECO S355 Type screen bucket with quick-release frame MS03 Type Skeleton Excavator Bucket (Unused) Capacity 140 litres Weight 86kg

We offer: used collision protection sticks, approx. 600 mm 35 piece(s) in stock 21698 Harsefeld. Per piece € 21.00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

Grinding spindle GMN TSAV 40 s x 208 - 6002 ( TSAV40sx208-6002 ) n max: 13000 rpm diameter: Ø 40 mm sleeve length: 208 mm tool holder / drive: Ø 11 / 13 mm, length: 15 mm ( cone 1 : 7,, 5 ) thread: M10 x 1.0, length: 10 mm, left-hand thread flange: 85 x 56 x 8.5 mm, bore: Ø 22 mm used, tested ! Dimensions ( spindle ): 261 x 85 x 56 mm Dimensions ( packaging ): 365 x 85 x 125 mm

Shock Absorber, Shock Absorber ACE CONTROLS MC 600 EUM ( MC600EUM ) MC600M stroke: 25,4 mm rod diameter: Ø 8.0 mm, length: 30.5 mm thread: M25 x 1.5 thread length: 100 mm with nut, width across flats: 30 mm with hexagon socket, width across flats: 10 mm New ! Dimensions ( without nut ): 141 x 25 x 25 mm

Coolant tank, mobile, coolant pan PAGUS 650 x 400 x 285 mm ( internal dimensions ) Filling height to outlet: 200 mm Volume: approx. 74 litres, approx. 52 litres to outlet mobile: 2x swivel castor, 2x fixed castor, no brake Chassis height: 260 mm Material: aluminum ( hull ), steel ( chassis ) Material thickness: 2.5 mm used , tested ! Dimensions: 800 x 430 x 570 mm

Filter cartridge, hydraulic filter insert W&R 300-610379001D Inner diameter: Ø 32,5 mm bore: Ø 9 mm outer diameter: Ø 57 / 60 mm Total length: 85 mm length (filter jacket): 65 mm Material connection flange: metal New ! Dimensions: 85 x 60 x 60 mm

Servo motor, electric motor, DC motor -Max. Speed: 6000/49 rpm -Power: 0.52 kW -Torque motor: 1.15 Nm -Shaft: Ø 25 mm -Construction: B5 -Gearbox manufacturer: SEW Eurodrive -Type: RF27 AQH80/2 -Translation: 1:28.37 -Dimensions: 410/140/H140 mm -Weight: 8 kg

Gas spring HAHN G10 23 250 1 600 AU19 AB11 600N 12/05 hole diameter: 8 mm Dimensions: 620 x 23 mm

Manufacturer: KIPSZER Type: CK 31/4 Volumetric flow: 690-1100 m3/h Power: 0.25 kW speed: 1400 rpm voltage: 220-380 V frequency: 50 Hz used, tested !

Asonators LBF 630 V 10.5 / 21.0 NM

Chip extraction, industrial vacuum cleaner NILFISK GB 635 50 STB -U- with stainless steel container for chip extraction 380 V without hoses used, checked ! Dimensions: 1100 x 700 x 1000 mm

Small dust extractor, dust extraction system ESTA OM-10 air flow: max. 600 m3/h vacuum: max. 1500 Pa motor: 0.55 kW 2740 rpm 220 - 240 / 380 - 420 V used, tested ! Dimensions: 650 x 600 x 1060 mm

Hydraulic power unit ORSTA B.604.263 Discharge pressure: 63 kp/cm² (61.7 bar) Power: 2.2 kW 2 motors and 2 pumps used, tested ! Dimensions: 1350 x 600 x 980 mm

Small dust extractor, dust extraction system ESTA OM-10 Air output: max. 600 m3/h vacuum: max. 1500 Pa Engine: AEG Type AM71NX2 0,0,55 kW 2750 rpm 220 / 380 V 3AC used, tested ! Dimensions: 750 x 620 x 980 mm