food tank used for sale

4.5 m3 stainless steel container . was used as a template of a well system .

1 truck powder silo tank loading with 2 separate powder loading points and own scaffolding construction to absorb the technology and the Enclosure of the approximately 7 m high powders Loading technology with flow vessel and powder delivery Technology through a Safeline metal detector in the truck filler neck. with rope glide staircase to reach Floor 1 and Floor 2 with complete steel construction for Wall and roof construction 1 truck powder silo tank loading with 2 separate powder loading points and own scaffolding construction to accommodate the technology and the Enclosure of the approximately 7 m high powder Loading technology with feed vessel and powder dispenser Technology through a safeline metal detector in the truck filler neck. with a stairway to reach it Floor 1 and Floor 2 with entire steel construction for Wall and roof construction

Storage tanks/ stainless steel tanks without pressure Volume: 10.000 liter UNI-FIN-FOR Measurement and Weight: Diameter approx. 2.050 mm cyl. Height approx. 3.000 mm Total height with feet approx. 4.540 mm Year: 1992 Material: Stainless steel, 1.4301 Wall thicknesses: sub-floor 3 mm, cylinder + upper floor 2.5 mm Tank with conical bottom Upper body: 2 crane eyes 1 flange connection DN 65 1 ventilation nozzle DN 100 with bend Cylinder tank: 1 manhole 440 x 340 mm at the top: 1 socket ¾ " Lover bottom: 1 outlet spout with bend pulled forward NW 40 Otherwise see photos and drawing

high-quality stainless steel tanks, standing on feet, made of V4A stainless steel Volume: 12.5 m3 Dimensions R26: 2.35 m x 4.30 m high incl. feet, with cooling grille and insulation Dimensions R25: 2.35 m x 3.10 m high incl. feet Dimensions R24: 2.35 m x 3.10 m high incl. feet

lying, insulated stainless steel tank with 2 concrete brackets (25 m high) Volume: 20 m3 Dimensions: 3.30 m x 3.00 m long

lying aluminium tank with inner coating with consoles Volume: 20 m3 Dimensions: 2.0 x 6.70 m long

Steel tank with inner coating (glass enamel) can be used above ground or underground Volume: 8.4 m3 Dimensions: 2.20 m x 2.50 m long

Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow

Storage tanks/ steel tanks/ extinguishing water tanks/ water cisterns pressureless, standing Content: 30,000 litres Available: 4 pieces UNI-OFF-FOR B. No. 20-137 GL internal epoxy resin-coated steel containers (wine tanks) Dimensions: Diameter approx. 3,000 mm Zyl. Height approx. 3,820 mm Total height with feet approx. 5,000 mm Containers with curved floors Wall thicknesses: sheath 9 mm, floors 10 mm on top floor in the middle: 1 block flange DN 50 on the coat: 1 manhole 450 x 350 swivel 1 flange trim NW 40 2 Block flanges NW 20 in the middle of the underbody: 1 block flange DN 65 otherwise according to sketch + photos

Storage Tank in V2A for wine, water, fruit juice, schnapps Capacity: approx. 1.200 liter Measurement: Total Height: 1730 mm Depth: 1150 mm Cyl. depth: 1000 mm Width: 730 mm Material: V2A Surface: Outside marbled, 2B=IIIC inside 2B=IIIC Upper body: With thread connection DN 50 Cylinder tank: With 1 manhole With level indicator with bar and scale Lower bottom: With outlet pipe pulled forward with butterfly valve DN 32 With 4 stable feet

Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks

Storage Tank/ Pressure Tank/Beer tank 2400 liters in AISI 304 with cooling jacket Test pressure: 1,5 bar, Operating pressure: 0,99 bar - NEW Material: V2A – AISI 304 (1.4301) Operating pressere: 0,99 bar Surface inside IIIC Operating temperature in °C: 130 Upper body: Manhole lid round DN 400 with 6 screws With 1 Thread connection DN 50 and with handle bar With CO2-connection (extra charge) With overpressure valve (extra charge) Tank cylinder: With cooling jacket With connections for cooling jacket on the back inlet 1” AG, outlet 1¼”AG With connection for sample valve DN 15 ( sample valve - extra charge) With connection for temperature indicator 3/8 (temperature indicator - extra charge) Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a m ...

100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 16,300 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in  ...

90 m³ / 90,000 l extinguishing water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ Length: approx. 13,500 mm Diameter: approx. 3,000 mm Weight approx. 11,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage in accordance with DIN 6608, single or double-walled, suitable for walkable and passable areas (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in N ...

80 m³ / 80,000 l extinguishing water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight approx. 13,250 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN  ...

60 m³ / 60,000 l extinguishing water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight approx. 9,500 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

50 m³ / 50,000 l extinguishing water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

Several 150 m³ storage tanks made of steel (extinguishing water tanks) lying underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground extinguishing water tanks in accordance with DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the version form B without bearing nozzle. Furthermore, the tank has a vent flange nozzle in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm earth cover and 500 mm above ground. - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen (against corrosion) or epoxy res ...

100.000 Liter water tank - Earth tank for underground storage, single or double walled, 1 dom DN 600 with blind lid incl. seal and screws - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen or epoxy resin inner coating (against corrosion) - it is also possible to line the container with a plastic inner shell - as standard, the container receives an inflow or overflow suitable for 100 KG pipe (other nominal diameters are also possible) A cost-effective delivery with your own truck is possible. Simply tell us the place of delivery, you will then immediately receive the exact ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 100,000 litres Diameter: approx. 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilize ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 80,000 litres Diameter: approx. 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 60,000 litres Diameter: approx. 2,500 mm Length: approx. 12,680 mm Weight: approx. 10,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 50,000 litres Diameter: approx. 2,500 mm Length: approx. 10,700 mm Weight: approx. 9,200 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer  ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 40,000 litres Diameter: approx. 2,500 mm Length: approx. 8,720 mm Weight: approx. 7,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

40m3 storage tank for AHL/ASL - steel tank used storage container 40,000 litres capacity for storage of liquid fertilizer / AHL / ASL with brand-new plastic inner shell The container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is professionally emptied and cleaned inside. D = 2.50 m - L = approx. 8.70 m. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The container is completely ground on the outside, re-primed and repainted in desired colour according to RAL. The price is ex works - freely charged. Delivery time = by arrangement.  ...

Liquid fertilizer / AHL / ASL - Tank tank storage tank storage tank a used storage tank 100,000 litres for storage of liquid fertilizer / AHL / ASL with a brand-new plastic inner shell. The container corresponds to DIN 6616, has 2 saddle feet, is professionally emptied and cleaned inside, incl. ladder. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. Due to the corrosive properties of the bearing medium, ASL containers require an inner plastic shell. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore AHL for the storage of ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 30,000 litres Diameter: approx. 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,500 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Manufacturer: AMS GmbH Built: 2012 Content: 552 l Double-walled (thermizable) Agitator available Including pump (mounted on frame) Control box

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 25,000 litres Diameter: approx. 2,000 mm Length: approx. 8,390 mm Weight: approx. 4,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 20,000 litres Diameter: approx. 2,000 mm Length: approx. 6,840 mm Weight: approx. 4,000 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

The brand new container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is primed on the outside - on untreated sheets. D = 2.50 m - L = approx. 10.70 m. The container receives a brand new plastic inner shell incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The price is ex works - freely charged. We recommend: Above containers sandblasting from the outside, prime and completely repaint - iron grey / RAL hue. (On request, other RAL colours are also possible!) ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. ASL container  ...

Piovan granulate tank, + inverter+ PLC #5249 With safety top door. Tank diameter 650 mm Tank height: 800 mm Overall size: 650x800x1300 mm

Compact 50l compressor with two very powerful, silent direct drive motors. Designed for workshops, dental offices and other places where regular compressors are too loud. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek SilentPro50-2 2.2kW: -Two powerful 1100W electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 2x1100(2200) Motor speed, Rpm: 1440 Air supply, L/min: 420 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 80 Air tank, L: 50 Dimensions(length x width x height), mm: 700x340x600 Weight, kg: 38 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 715x365x650 Weight, kg: 43 Tracking:  ...

4 cyl.-con. Yeast tanks, make BAM, each with 53,88 hl content, 1,5 bar working overpressure, standing on 3 feet (1 foot on weigh cell), in stainless steel mirror polish design, with 3 cooling zones (2x wall and 1x cone), with screwed swiveling cone point, magnetic agitator in cone, ladder hanger at top, Ø: 1.800 mm, H: 2.900 mm. Price: 8.000 € each tank, free load on truck

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

Used vertical stainless steel tank with jacket, 7000 L volume. Pressure: 0 Bar tank, 6 Bar jacket. Jacket volume 32,5 L. Motor EX, agitator.

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex works, freely charged - The container is sandblasted from the outside, primed and completely repainted - iron grey / RAL hue. (On request, other RAL colours are also possible!) general: You will receive an invoice with  ...

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10,00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - traffic grey / RAL hue. (On request, other RAL colours are also possible!) general: The price fo ...

40,000 litres of earth tank for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 8,70m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and A-deck capsule according to DIN 1 ...

T9 - used approx. 20 m³ / 20,000 ltr steel tank with coated inside, standing upright. technical details: capacity: approx. 20 m³ / 20,000 litres material: steel tank with inner coating dimensions: Ø approx. 2.55 m × total height approx. 5.70 m Used steel tank with inner coating, professionally cleaned and in good condition. Standing, above-ground storage tank on 4 steel feet, lid on top of the roof and down at the tank bottom, several inlets and outlets. Steel rack and matching ladder available at an additional cost. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertise ...

Storage tank 12,500 liters standing from V2A used - in very good condition Dimensions and weight: Ges. Height: 7100 mm Cyl. Height: 6080 mm Diameter: 1600 mm material: V2A - AISI 304, 1.4301 surface: Outside and inside IIID Topsoil: with klöpper bottom above with thread DN 65 central cylinder: with pipe pulled down with level indicator with manhole oval 330 x 430 mm with bracket and holder with 2 x clear drain with inclined seat valve with thread DN 50 subsoil: With klöpper bottom with forward pulled outlet pipe with disc valve DN 50 with 3 calotte feet height adjustment

Storage tank 5,000 liters standing from V2A used – in very good condition Dimensions and weight: Ges. Height: 6850 mm Cyl. Height: 6020 mm Diameter: 1080 mm material: V2A - AISI 304, 1.4301 surface: Outside and inside IIID Topsoil: with klöpper bottom above with thread DN 65 central cylinder: with pipe pulled down with tasting tap with manhole oval 300 x 400 mm with bracket and holder with 2 x clear drain with inclined seat valve with thread DN 50 subsoil: with klöpper bottom with forward pulled outlet pipe with disc valve DN 50 with 3 calotte feet height adjustable

Storage tank 10,000 liters standing from V2A used – in very good condition Dimensions and weight: Ges. Height: 7500 mm Diameter: 1450 mm material: V2A - AISI 304, 1.4301 surface: Outside and inside IIID Topsoil: with klöpper bottom above with thread DN 65 central with threaded nozzle DN50 cylinder: with pipe pulled down with tasting tap DN25 with manhole oval 300 x 400 mm with bracket and holder with 2 x clear drain with inclined seat valve with thread DN 50 subsoil: with klöpper bottom with forward pulled outlet pipe with disc valve DN 50 with 3 calotte feet height adjustable

Storage tank 1,700 liters Standing from V2A dimensions: Ges.Height: 3600 mm Cyl.Height: 3200 mm Diameter: 850 mm material: V2A – AISI 304, 1.4301 surface: Marbled outside cylinder: With threaded nozzles in the middle top DN100 With ladder hook With manhole 400 x 300 mm With threaded nozzle DN65 With residual drain DN80 subsoil: Also stands steel construction with 4 feet

Capacity 160 l, Stainless steel version, with lid Electric heating with temperature controller (30 to 80°C) With limiter 95°C, Outlet valve. With electric cabinet and motor START-STOP With propeller agitator, motor 0.37kW, approx. 300rpm Space requirement 600 x 600 x 1500 mm high, weight approx. 250 kg Already outdated, short-term from stock. (In the photo still with the saline solution for the TEST in the container)

Filter tank,stainless steel,with agitator,tiltable,Ø 600 mm.

Tank,stainless steel,closed top,standing on legs,tank cover in the top,Ø 1560 mm.

Tank,stainless acid proof steel,standing on legs,tank cover in the top,Ø 1560 mm.

Tank,stainless steel,closed top,standing on legs,tank cover in the top,Ø 2000 mm.

Tank,stainless acid proof steel,standing on legs,tank cover in the top,Ø 2000 mm.