We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,888 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
A well-preserved extrusion recycling product EREMA series RGA 80 TE for processing polyethylene (PE), polypropylene (PP), . Power up to 250 kg/h, electrics 240/400 volts, 50 hearts, short-term available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
used
Squeezer Engine: 172 Kw. With electrical panel.
used
System includes receiver tank, agitator, expansion tank, sealing water tank, equalising tank, centrifugal pump, side channel pump, vacuum liquid ring pump, tubular heat exchanger, condenser, plate cooler, sight glasses, fittings and permanent magnet, with documentation.
used
System includes receiver tank, agitator, expansion tank, sealing water tank, equalising tank, centrifugal pump, side channel pump, vacuum liquid ring pump, tubular heat exchanger, condenser, plate cooler, sight glasses, fittings, permanent magnet and filter, with documentation.
used
Volume: 400l, max. permissible pressure: -1.0bar, min.-max. temperature: 10°C-90°C, test pressure: 0.1bar. External dimensions X/Y/Z: approx. 1500mm/2400mm/2600mm, weight: approx. 1500kg. Completely overhauled and hardly used since. On-site inspection is possible.
used
Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is possible.
used
System includes (1) Two-Cylinder Motor HERFORD 2H 280, power: 150PS, rotational speed: 400/min, electric/ heating power: 83/ 140kWh, with Generator MARELLI MJB 250 LE4 (2) Three-Cylinder Motor HERFORD 3H 280, power: 225PS, rotational speed: 400/min, electric/ heating power: 125/ 212kWh, with Generator MARELLI MJB 250 MA4.
used
Operating pressure: 10-20bar, weight: 1.33t, with buffer storage, pumps and external heat exchanger.
used
Combined heat and power unit has been converted for continuous operation. Output: 225kW at 1500 rpm. Fuels: diesel/fuel oil.
used
MONOBLOC Delta 816S & Minerva 200 WireHooding EXTREMELY LOW MACHINE HOURS
used
Electrical output: 5.5kW, thermal output: 14.8kW, power consumption: 20.5kW. Max. Flow temperature: 95°C, max. return temperature: 70°C, operating pressure: 5bar. Dimensions X/Y/Z without controller: approx. 1000mm/720mm/1070mm, weight: 530kg, operating hours: 66773, fuel: natural gas. Including condenser and MSR 2 control. Documentation available.
used
System includes (1) Dekanter FLOTTWEG X4E-4/ 454, output: 30m³/h (2) Sludge Pump NETZSCH AGNM02 (3) Polymer Pump NETZSCH, as well as thick matter pump, polymer dosing pump, flow measuring devices and additional elements, operational hours counter: 7919h. Max. Operating current 63A, as the main switch in the control cabinet is rated for 63A. A 125A CEE supply line is required for operation.
used
Volume: 1.5m³, max. cleaning capacity: 250l/min, air consumption: 12m³/d, operating pressure: 6bar, collection tank capacity: 1200l, dimensions X/Y/Z: 2121mm/1339mm/3076mm, weight: 610kg. Documentation available. On-site inspection is possible.
used
High-performance packaging machine Schlichter Profi Packer SCV-400 Plus, YOC 2014 - Product width: 45 - 400 mm - Product height: 1 - 200 mm - Product length: 50 - unlimited mm - Power: max. 60 cycles/min - Transport speed: 8 - 30 m/min - Film thickness: 10 - 80 μm - Temperature range: 170°C - Total power: 25 kW - Machine weight: 2,100 kg - Space requirements (W x D x H): 11.5 x 2.4 x 2.0 m Details Plant structure: Magazine for elongated parts, conveyor belt, film packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used for welding 2 m aluminum tubes (clocking 8 pieces / min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower are adjustable. Film material: PVC polyolefin fine shrink films and polyethylene films
used
Working width: 2000mm, usable length dryer: 4000mm, production speed: 5-25m/min, speed: 0-30m/min, polyamide powder application quantity: 25g/m², infrared heating output: 2x 40kW + 2x 3kW, length: 13,000mm, operational hours counter: ca. 16,000h, with documentation, without spare parts, was maintained regularly.
used
see PDF attached
used
Description Plastic Regranulation Line Extruder diameter 106 L/D 35 Vent Feeding Silo Screen changer Machine stoped for upgrading to a new version. Worked till arrive of the new one.
used
Description Regranulation Line complete of granulator Extruder Diameter 60 L/D 35 Silos for forced feeding of film Granulator 35/45 Vent Screen changer Centrifuge
used
Description Regranulation line for polyolefins Screw diameter 85 Nr.1 Vent Spaghetti granulation head Hydraulic screen changer Cooling tank Pelettizer
FULLY REFURBISHED TR 7 ESL WITH SCREW CAP WITH UPDATES
used
Description Tecnova regranulation line Single Screw extruder 105 L/D 36 nr.1 vent with vaccum pump Silos for foil feeding Granulator Meccanoplastca MZ 44/55 year 2006 Conveyor for granulator feeding with metal detector CEIA
Filler bloc Stork/Zalkin 48/8 with 48 filling valves and 8head Zalkin screw capper for Aluminium Screw Caps Bottle Size: 330 ml glass bottles Filling Product: Hotfill Juices Capacity: 18.000 BPH by 330 ml glass bottles running direction: right - left including vacuum pump including electric control panel including new main bearing complete reconditioning of the lifting cylinders complete reconditioning of the filling valves complete reconditioning of the cap sorting unit, cap Channel and Capping Heads including safety-housing all around the machine includung testrun on the machine in our workshop
used
Punch Rounder PR101 is a 1 row dough ball forming machine. Dividing and rounder process is automated by connecting to the Rheon Twin Divider wich accurately cuts the product to the desired weight. It molds various types of dough to a perfectly round shape such as high water absorption and long fermentation dough. It is a machine that has never been used (at most she has 30 hours on her hourmeter) Offers are heard
used
Haul-off, used and refurbished Manufacturer: Battenfeld Type: P-250-SX-2000 Year of construction: 1988 Haul-off force: 30,000 N Pad width: 250 mm Effective contact length: 2000 mm Number of rubber pads: 200 pieces Haul-off speed: 0.16 - 4.0 m/min. Drive motor: 4.2 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic Profile cross-section: max. approx. 300 x 100 mm Power: 10 kW Dimensions: 3400 x 1300 x 2300 mm (LxWxH) Weight: approx. 2300 kg Condition: The haul-off has recently been completely overhauled.
used
Caterpillar haul-off, used Manufacturer: IDE Type: ME-31 Year of construction: 1976 Pad width: 180 mm Effective contact length: 800 mm Pull-off speed: max. approx. 10.0 m/min. Drive motor: approx. 3.0 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: manually by spindle Profile cross-section: max. approx. 300 x 100 mm Note: The haul-off was overhauled in 2015 and a new electrical control cabinet was installed. Condition: The upper gearbox is leaking.
used
We offer, in its current state, from the location Fruit juice concentrate plant Was operated for juices from apple, sour cherry Manufacturer: M&L Construction was realized by ex Gea Wiegand Engineers and sold by Bucher Still installed, ready for operation, in well-maintained, maintained condition Year of Manufacture: 1999 Type: Falling Film Evaporator Number of levels: 4 Water evaporation per hour: 12.7 Including aroma column Combi evaporator, with 120°C pasteurizer Subject to prior sale
used
Rademaker Bread line Low stress bread line, previously used to make focaccia and other breads, up to 2000Kgs per hour, refurbished in 2015, brand new belts throughout,
used
Diatomaceous earth filter plant for wine 2.000-10.000l wine per hour in very good condition Condition as in the pictures Sale price 4.000,00€ basis for negotiation For viewings please contact me.
used
Machine has been retrofitted for the personal protection of own fixture construction, with new German CE conformity. Capacity 2500 - 3000 pieces / hour There are still spare parts available. Furthermore, 3to fleece and 1.5 tons of wire and 700kg of strip are available for each type of fleece.
used
Used hard PVC granulation plant after reconditioning Capacity approx. 200 - 300 kg/h, consisting of: 1.Extruder Krauss Maffei KMD 2-60KK (twin-screw, oblique screws), Year Built 1996 Main engine 37kw Heaters controlled by thermoregulators Heaters of German production Degassing – pump Screw diameter: 60-125 mm Screw speed 37.5 rpm Oil-thermostated augers externally Heating power of snails 6kw Screw cooling power 7kw Oil-cooled cylinder 4 zones on the cylinder (including 3 heating and cooling zones) Gefran/ Gneuse mass pressure sensor – Gefran/Gneuse ground temperature sensor Cylinder cooling power 14kw Capacity up to 300 kg/h 2. rotary filter (sieve changer) Manufacturer: Gneuss Type SF-90 – capacity up to 350 kg/h 3.Cutting in hot air system 4. granulate cooler with conveyor fan
new
Cutter Compactor Plastic Recycling Pelletizing System The ACS-H TM series compacting and pelletizing system combines function of crushing, compacting, plasticization and pelletizing to One step. Applied in the plastics recyclng and pelletizing process. ACS-H TM system is a reliable and efficiency solution for plastics film, raffias, filaments, bags, woven bags and foaming materials re-pelletizing.Lower investment for a high performance machine. It can provide higher output but with lower energy consumption. Application: PE,PP,PS,ABS,XPS,EPS,PVB.
used
CONTINUOUS DYEING RANGE TYPE OF TAPES LIGHT ELASTIC AND RIGID TAPES DESCRIPTION MACHINES ON REQUEST
new
Project: PE film pelletizing line Raw material & formula -HDPE video Final product--HDPE granules, 3-5mm Output capacity--450~550kg/h, depends on condition of client's material. Coplete ofert is under the link: file:///C:/Users/Marcin/Desktop/krowy/Ofert%20granulacji%20ACS120..htm
used
An unrenovated very little used ready-to-use extrusion-recycling product EREMA type RGA 1716 TE-VSV for processing shredded washed PET flakes. The quality of the rPET for direct contact with food according to the standards of the F.D.A. (USA) and EFSA (EU) can be achieved with an additional machine with SSP technology. Year of construction 2001, Extruder screw Ø 160 mm (L/D about 34), drive 200 kW, EREMA screen changer type SW8/170RTF, high vacuum system, granulation of Previero, Siemens control with touch screen, Capacity 600 – 1,000 kg/h; usual power was 800 kg/h, Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827 V
used
CONTINUOUS DYEING RANGE, MAGHEBA ROLLER WIDTH 625MM HEATING SYSTEM GAS LAYOUT IN LINE 2 ROLL FINISHING PADDER 625MM DRYING CYLINDER 800X1250MM LAIT OUT FOR GAS HEATING DANCER DEVICES BETWEEN THE CYLINDERS TAKE-OFF DEVICE WITH 3 STATION, 1250MMWIDE SEPARATE CONTROL DESK + PLUG CONNECTIONS
used
NRP 90 GARMENT DYEING COMPUTER 30-60-90 KG FULL COLOUR KITCHEN EVR 120 ESSICATOR NEW STEAM COIL REWIND COMPLETED PLANT YEAR 2018 PERFECT
used
CONTINUOUS RIBBONS THERMOPRINTING PERFECT ELECTRIC PLANT NEW
used
Vacuum pump
used
Stock # UG6358 Used cogeneration plant by Caterpillar working on natural gase. Consist of two motors type G3516C, each with power 1.2 MW. Total power 2.4 MW.
used
1 x Vacuum calibration unit for profiles Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Total length: 6700 mm Vacuum connections: 4 x 8 pieces Water connections: 26 pieces Vacuum pumps No.1-3: 3 pieces of BluVac pumps from Speck, Energy-saving vacuum generation thanks to patented speed control Pump power: 3 x 4.3 kW Vacuum pump No. 4: Speck (5.5 kW) Longitudinal adjustment: electromotive Connected load: approx. 26 kW Accessories: 1 x water pump (1.5 kW) for the water circuit, 1 x blower (0.95 kW) for drying the profile,
used
Haul-off and saw combination, consisting of: 1 x Caterpillar haul-off Manufacturer: Battenfeld Type: P250-SX-2400 Year of construction: 1992 Contact length, effective: 2200 mm Pad width: 250 mm Haul-off force, max.: approx. 30,000 N Speed: max. 8.0 m/min. Connected load: approx. 6.0 kW 1 x Saw Manufacturer: Battenfeld Type: SPR-125 Year of construction: 1992 Profile cross-section, max.:230 x 90 mm or 160 x 110 mm Pipe diameter: max. 125 mm Saw blade diameter: 420 mm Travel distance:1000 mm Working speed: max. 20 m/min. Cutting capacity: 15 cuts/min. Saw motor: approx. 1.5 kW
used
Gebr. Kemper bread plant, overhauled, with round and long knitting Kemper Superba SU-BR-2500G, 270 cm long round beam, with Kemper BE-13 bucket elevator
used
Capacity/h: 7000 Pa/h Condition: very good, ready for use Tetra Pak TBA A3 Flex Prisma Square 1000ml line, consisting of: Tetra Pak A3 Flex Prisma Square 1000ml, TCAP 45, TCBP 70, conveyor belt system Conveyor 23. To complete the offers, the following additional equipment can be added from our current inventory: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyor belts, closure systems, etc. On request, we can provide comprehensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We would be happy to provide you with a detailed, non-binding offer. Subject to prior sale of all offers
used
Capacity/h: 7000 Pa/h Condition: very good, ready for use Tetra Pak TBA A3 Edge V100 1000ml, consisting of: Tetra Pak A3 Flex Edge V100 1000ml, TCAP 45, TCBP 70, conveyor belt system Conveyor 23. To complete the offers, the following additional equipment can be added from our current inventory: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyor belts, closure systems, etc. On request, we can provide comprehensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We would be happy to provide you with a detailed, non-binding offer. Subject to prior sale of all offers.
used
Capacity/h: 7000 Pa/h Condition: very good, ready for use Tetra Pak A3 Flex 1000ml Slim, consisting of: Tetra Pak A3 Flex 1000ml Slim, TCAP 45, TCBP 70, conveyor belt system Conveyor 23. To complete the offers, the following additional equipment can be added from our current inventory: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyor belts, closure systems, etc. On request, we can provide comprehensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We would be happy to provide you with a detailed, non-binding offer. Subject to prior sale of all offers.
used
2 LITRE PET LINE at 10,500 BPH KRONES BLOC WITH IPANEL (Yr 2010) - 70 FILLING HEADS- 12,500 BPH MAX SPEED SIDEL SBO8 BLOW MOULDING AIRVEYOR COOLING CONVEYOR KRONES AIRCO INFEED CONVEYOR KRONES CARBONATOR (2010) HEUFT INSPECTION (2012) KRONES CONTIROLL LABELLER (2012) SMI DIVIPACK & SMI OVERWRAPPER KHS HANDLE ATTACHMENT LOGOPACK PACK LABELLING ACMI PACK SORTING & ROBOT PALLETISING FANUS PACK HANDLING ROBOT TOSA PALLET WRAPPER LOCATION: UK The line is installed in the factory and inspections are most welcome. The machinery is in good working condition and ready for engineering removal. We can provide the full installation service if required. Please contact Indassol today for a quote!
used
5 LITRE PET LINE - 2,000 BPH Sidel ‘SB02F’ Rotary Blow Moulder, M08 neck finish, Sidel Preform Hopper and Feeder Elevator with Sidel Preform Unscrambler Air Conveyor System with swan neck elevator and lowerator AVE 15 Valve Filler and 4 Head Capper with cap hopper and elevator (2004) Comag ‘PLH2500’ Neck Handle Applicator (2008) Harlands 155WS RC Inline Labeller (2010) Smipack ‘BP700AR’ Shrink Wrapper (2006) Smipack ‘T650’ Conveyorised Heat Tunnel (2007) Logopack ‘410IIIF’ Pack Labeller (2015) Lita ‘Eco’ Palletising System comprising of infeed metal roller conveyor, Lita pack stacker with carboard tray insertion, pallet infeed and outfeed system TOSA ‘85’ Rotary Pallet Wrapper, Type AV5866 and outfeed station Location: UK This 5 Litre PET line is in good working order, and inspection in the factory is most welcome. ...
used
Natural gas CHP units available Jenbacher JMS 312 GS-B02 Year of construction: 1994 Power electric: 470 kW Thermal power: 618 kW Generator: Stamford HC 634 H2, 910 kVA Voltage: 400/231 V Frequency: 50 Hz Speed: 1500 1/min Operating hours: approx. 84000 Last overhaul at approx. 45000 operating hours Includes heat exchanger, control cabinets Subject to prior sale - errors possible Ref. No.: E-0913
new
dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner ...
used
Used reverse osmosis water treatment plant, Swiss company SILHORKO, capacity of 3 m3/h. 21 Bar. Replacement of 09.2020 membranes.