foil winding machine used for sale

Condition: well-maintained / fully functional Power supply: 220 V, 50-60 Hz Internal power supply: 24 V DC Compressed air: 6 bar Machine weight: 205 kg (net) Machine dimensions (WxDxH): 850 x 780 x 1440 mm Outer diameter (film roll): max. 160 mm Core diameter (film roll): 70 mm Film thickness (with good film quality): 0.010 mm Film thickness (for sharp-edged shapes): 0.012 mm Foil width: depending on the shape of the praline - 1 set of truffle chocolates - 1 format set for dome chocolates - 1Format set for chocolate hearts (6g relief)

Croissant Cutting & Wrapping Line Fritsch CTR 700/30Product DescriptionManufacturer: FritschType: CTR 700/30Year of Construction: 2000Condition: used, cleaned, functionalUsed Fritsch CTR SystemIncl. Various rollersConnected load: 3x 400 V / N / PE / 0.5 kWDedetails see pictures.

OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...

Croissant wrapper wrapping machine Seewer Rondo Model: Rondinette SGRR for the rational production of croissants Ease of use Tabletop unit with new hinges Stainless steel Connection 400V, 16A-CEE plug Dimensions: 345 x 590 x 330 mm, DxWxH Used machine cleaned and workshop tested with 6 months warranty Many more winding machines in stock!

NUMBER 25 POSITIONS AUTODOFFING HEBERLEIN JET RUNNING CONDICITIONS ALL MACHINES PERFECT SUPERIORE CREEL

WINDING MACHINES NUMBER 24 POSITIONS FINAL BOBIN 180 - 230 MM COMPUTER CONTROL PERFECT

NUMBER 18 POSITIONS. COMPLETE WITH 18 PEYER 123 CLEARES AND 3 CONTROL UNITS WHICH RESPECTIVELY SEND 9 HEADS , 6 HEADS AND 3 HEADS TO PROCESS 3 DIFFERENT YARNS AT SAME TIME. COMPLETE YARN TENSIONERS.

NUMBER 15 POSITIONS COMPLETE WITH 15 PAYER 123 CLEANERSAND 2 CONTROL UNITS WHICH SEND 9 HEADS AND 6 HEADS RESPECTIVELY TO MAKE 2 DIFFERENT YARNS AT SAME TIME. THIS ISCOMPLETE WITH A THREAD TENSIONER ON THE ENTIRE MACHINE. SLIDE FOR COMPRESSED AIR AND 2 SPLICERS. ELETRONIC WINDERS WITH GROOVED DRUM FOR THE PREPARATION OF PACKAGES FOR DYEING WEAVING KNITTING SOCKS AND WARPING WITH OR WITHOUT WAXING, WITH OR WITHOUT PRESET METER.

NUMBER 15 POSITIONS COMPLETE WITH 15 PAYER 123 CLEARERS WITH 2 UNITS CONTROL. THE CONTROL UNITS SENT ONE 9 HEADS AND THE OTHER 6 SO THAT 2 SEPARATE YARNS CAN BE MADE AT THE SAME TIME. COMPLETE WITH SLIDE FOR AIR KNOTS AND 2 SPLICERS FOR KNOTS.

Compact pretzel long roller with croissant winder and feed belt Universe Kasper Model: LWT 3/30 -EB 2 for all rods and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Longitudinal width 600 mm for pretzel strands Total efficacy over 2 levels Dough filler from 25 - 180 grams Stainless steel version with step flap with EB2 feeder with centering device and pre-rolling for bread roll lines with transverse discharge DGUV V3 tested with sling table hold flap Connection 400V, 16A-CEE plug Approx. dimensions: 1600 x 700 x 1800 mm, WxDxH Used machine overhauled with 6 months warranty More bakery machines in stock!

AIR COVERING MACHINES NUMBER 36 POSITIONS HEBERLEIN JET RUNNING CONDICTION

NUMBER 60 POSITIONS SECTION 6 ALIMENTATION BOBIN-BOBIN LOAPFE TK830N SPLICER 4924E CYLINDRICAL DRUM TYPE BLOWER AUTODOFFING

wrapping machine for stuffed croissants; with irrigation; Suitable for operation with Fritsch CTR; Harting connection; Analog control;

With Measuring, Control and Sorting Machine Schenker MR 20 and Wire Reel SR 50.

Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools.

Max. package height: 120mm, min. bore diameter: 20mm, wire diameter range: 0.1mm to 1.6mm. Weight: 1500kg. Control defective. Report from Aumann available. Documentation available.

Usable roll width: 420mm, roll diameter: 10-73mm, output: 50 cycle/min, connected load: 1.4kW, length: 1035mm, width: 1084mm, height: 1620mm, weight: 363kg, operational hours counter: 400h, with documentation.

Working width: 520mm, number of punching stations: 2, unwinding diameter: 76mm, with documentation, unwinding, splicing table, side edge control, grid take-off and matrix rewinding/grid rewinding, label converter/label shifter for 110x75mm format, slitting station with four shear blades, two separate rewinding axes, magnetic cylinder 134Z and magnetic cylinder 161Z, on-site inspection is possible.

With control cabinet and documentation, the machine was hardly used, in inspection is possible.

Two identical machines are available, max. speed: 600m/min, min. width 250mm, roll diameter: 200-800mm, roll width: 600-4000mm, thickness: 54-350µm, with documentation and spare parts, has been regularly serviced, on-site inspection is possible.

Number 72 spindles for preparation alluminium spools

NUMBER 60 POSITIONS

Number 56 positions

Two identical fully automatic winding machines are available. Both were overhauled by the manufacturer 4 years ago. max. linear mechanical speed: 35m/s, max. compressed air pressure: 7bar. Material to be processed: welding and staple wire, max. tensile strength: 1600N/mm². Wire diameter: 0.8 - 1.0 - 1.2mm, tolerance on max. diameter: 0.05mm. Support: K300 - D300, weight of spools/wire baskets: 15 - 18 - 20kg, weight: approx. 3000kg, mit Dokumentation.

Absolutely as good as new (low operating hours) stretch film winding system; incl. control with control panels, protective fences, steel substructure almost new complete stretch foil winding machine; incl. plc, operators panel, steel construction, safety fences

R25972/18 GUSCHKY Spiral sleeve winding system Model: Built: Availability: instantly Wrapper: Manufacturer: Guschky Technical data: Area inner diameter 20-100mm Area wall thickness 4.5mm Maximum belt speed 50 m/min Engine power approx. 10 kW Voltage 220V Three-phase current 50 Hz Air pressure 6 bar -------------------- pneum. Saw: Manufacturer: Guschky Built: 1990 Technical data: Area inner diameter 20-100 Area wall thickness 4.5mm Sleeve length 400 - 6100 mm --------------------- unwinder and glue station Manufacturer: Gasser Built: 1986 Technical data: Gluing Diving Process Number of paper webs 8 + 1 separate deck Available: immediately

New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives

MACHINES PERFECT

MICAFIL Winding Lathe Type WBD-5 -100/300 Winding, shrinking, turning lathe / Type V-B-V Max Rotor Diameter 1800 mm Max Carriage Length: 450 mm Tray diameter: 1200 mm

Thumm SU100 P Current UV Immersion Impregnation System with Exhaust Air Purification System Current UV impregnation is an innovative immersion process for low-voltage round wire windings. In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow. When dipping the heated winding, the impregnating agent becomes thin and can thus penetrate into the smallest cavities. With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can drain off again after immersing on the cooler sheet metal package. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the sheet metal package. By eliminating conventional furnace drying, energy and time are saved. Together with the use of a low-emission impregnating agent, the en ...

Qty. 1 Second-hand bifilar pipe winding line Mfc.: GRAEWE GmbH Type: AEW 1000 Built: 1998 Tube dia.: 10, 12, 14 & 16 mm Coil core ID: 940 mm OD: 1250 mm Bifilar coiler Type: EW 1000 PLC Simatic S5 Consist of: De-coiler Coiler Ring coiler Bending unit Support table Cutting shear Binding device Electrical Control

Reel on and off reel, reel GSW SCHWABE Type LHD 50/800 Probe Double unwinding reel, double uncoiler Fabr. No. 5775 Year of construction approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Plant discs 850 mm Start-up rings 850 Center reel shaft to reel foot 980 mm - Reel structure manually rotatable by 180 with latching steps - central spread via rotary lever adjustment - mechanical disc brake, adjustable brake shoes via knurled screw Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg good condition; used

Complete winding drive, rewind drive, D350mm - D650mm, IBD, mint condition -60% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Complete winding drive, rewind drive D350mm to D650mm consists of: 1) Total 120 x 86 x 120cm high, 350kg 2) Heavy frame with bearing and shaft, IBD 3) Manually adjustable drum support D350 to D650mm x 430mm long 4) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 5) Hypoid gear, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, 6) Metal bellows coupling BC2-00300AA032-000-032.000 Wittenstein ...

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: TA 8.5 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 4x available -Price: per piece -Dimensions: 320/235/H185 mm -Weight: 23 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: TA 0.78 Nm -Speed: 910 rpm -Shaft: Ø 14 mm -Construction: B3 -Number: 8x available -Price: per piece -Dimensions: 235/210/H150 mm -Weight: 11.2 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Performance: TA 2.0 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 1x available -Price: per piece -Dimensions: 285/235/H176 mm -Weight: 16.5 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 60 rpm -Power: TA = 5 Nm -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 700/225/H210 mm -Weight: 30 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 25 rpm -Power: TA = 8 Nm -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/140/H185 mm -Weight: 14.4 kg

WINDING FOR RIBBON

A conveyor system is available for the transfer of Euro pallets to a warehouse automation, suitable for weighing, barcode scanning of the pallet, optional film wrapping, measuring, output to two output places or in case of error to a separate place, with pallet wrapper C&C group C-ONE EXTREMA, pallet dimensions: 1200x800mm, max. pallet weight: 1t, including documentation, control cabinets and accessories.

Description:  , GENERAL MACHINE DESCRIPTION: A. Roller Conveyor for cell entry B. Machine for aluminium adhesive tape winding and cutting. C. Nr. 2 machines for butile adhesive tape application, tube and polietilene adhesive tape wrapping around and for aluminium tube end cutting. D. Machine for aluminum tube coining. E. Machine for internal tube diameter calibration on one or both ends. F. Pick-up for cell moving on single machines or from machines to roller conveyors. G. Conveyor for worked cells unloading.  , DIMENSIONS OF CELLS  , This sytem is projected to work cells type: COMBI BOTTOM and COMBI TOP.  , NOTE: Machine is not under power, already dismantled. Approx. Onsite Dimension. (l x w x h): 15,000 x 15,000 x 6,000 mm, weight approx.: 50,000 kg

Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

Mfc.: KALLFAS Type: Universa 8060/200 Special Buit: 1996 Power: 21 kW, 400 V, 3 ph., 50 Hz, 58 Amps. Automatic L-Bar sealer – pneumatic - continuous heated system Package size: 800 mm wide x 600 mm deep x 100 mm tall (31-7/16 x 23-1/2 x 3-7/8) Admission height dealer frame: approx. 200 mm Packaged product length max.: approx. 750 mm Transportation product width entry/exit: 500 / 560 mm Speed control by infinitely variable inverter Foil: Center folded film – printed or neutral – up to 60 microns Foil roll dia.: max. 400 mm Foil width: 800 mm Foil overlapping: min. approx. 50 mm max. approx. 100 mm Working height adjustable: 850 – 915 mm Capacity: 30 cycles / min.

1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM

THICKNESS: 0.014 - 0.030 mm, DOUBLED FOIL THICKNESS: 0.028-0.060 MM;