floor type used for sale

Digital floor scale,stainless steel,Scanvægt type 3200,max 300/600 kg,interval 100/200 g.

Digital floor scale + table scale,stainless steel,weighing area 500-600 kg,wall display.

T-slot Table 3050 x 1520 mm Length: 3050 mm Large: 1520 mm Weight: 10 ton With (1) -- Without (2) nuts: yes

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

Electric scrubber drier, floor cleaning machine DEAWOO type DAFL50A Fabr. No. 22DW01702ALE01-00028 Year of construction 2022 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume Pure water: 50 litres Tank volume Waste water: 50 litres Noise pollution 66 dBa Climbing capacity 2% Battery voltage 24 Volt, 100 AH - Battery charger 24 Volt- Battery 24 Volt , 100 AH - one cleaning brush - two separate tanks - without drive, the device is pushed by hand Dimensions L x W x H 1275 x 850 x 1350 mm Empty weight 160 kg very good condition, as good as new; used

T-slot Table 3150 x 2000 x 400 mm Thickness: 400 mm Length: 3150 mm Large: 2000 mm With (1) -- Without (2) nuts: 8 t-slots

T-slot Table 3050 x 1520 mm Length: 3050 mm Large: 1520 mm Weight: 10 ton With (1) -- Without (2) nuts: yes

T-slot Table 3050 x 1520 mm Length: 3050 mm Large: 1520 mm Weight: 10 ton With (1) -- Without (2) nuts: yes

T-slot Table 4000 x 2500 x 300 mm Thickness: 300 mm Length: 4000 mm Large: 2500 mm Weight: 12 ton With (1) -- Without (2) nuts: 10 t-slots

Platform scales, platform scales, floor scales made of stainless steel MINEBEA - Sartorius type IFS4-600LL-I Cleanroom scale Fabr. Ref: 379 383 79 Year of construction: 2019 Weighing capacity max. 600 kg section 25-1500 kg / 0.5 kg Platform size 1000 x 1000 mm Platform height approx. 30 mm Mains connection 220 volts, 50 Hz - Completely made of stainless steel 1.4301, suitable for food industry or midizin technology- Display unit, evaluation device CAIS 1 (Fabr. No. 37967266) - Calibration class III- Ramp for driving onto the weighing platform - Rollable via height-adjustable transport rollers Space requirements L x W x H 1250 x 1150 x 90/200 mm Weight 130 kg Transport package 1500 x 1250 x height 500 mm Weight with packaging 170 kg very good condition, as good as new (probably unused); used

We offer: Chipboard, used 1 plate, approx. 2,080 x 1,180 x 38 mm 5 piece(s) in stock 21698 Harsefeld Per piece € 37.00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

Tartellette machine / floor punching machine Peerless Model: OMatic Floor-standing machine with 5 moulds Machine with adjustable step heating for punching head. For molds: Upper diameter: 120 mm Bottom diameter: 115 mm Height: 20 mm Mass: Width: 800 mm Depth: 800 mm Height: 1900 mm Condition: very good, mechanically tested, ex service

Technical data baler: Manufacturer BOA Type 2100 75 (8) PR SD Year of manufacture 1995 Operating hours 9,163 hours, as of June 23 Pressing force main press 90 t Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Filling volume / pressing cycle 2.4 m³ Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 2 x 37 kW Connected load 92 kW Tying system 4-fold vertical, fully automatic, prepared for 8-fold cross binding Throughput rates for quality: B12 / B19 approx. 10 t/hour, bale weight up to 1200 kg/bale Foil approx. 10 t/hour, bale weight up to 800 kg/bale Hydraulic oil tank capacity 1,500 L PLC control system Siemens SIMATIC S7-1500, renewal in 2020 Press dimensions built up with hopper 15,000 x 6,000 x 6,500 mm (l x w x h) Transport dimensions 12,800 x 2,500 x 3,100 mm (l x w x h) Machine weight press approx. 30 t Noise level

Floor scrubbing machine Kärcher B40 W Bp Year of construction: 2012 new batteries Weight: approx. 205kg

mezzanine floor / platform Dimensions approx.: 14x10m Platform height without crossbeam 2.74 m Platform height with crossbeam first row 3.61 m, second row 3.00 m Base plate thickness 2.1 cm A total of 30 stands + 50 trusses Item location: 37308 Geisleden The mezzanine floor must be dismantled by yourself, dismantling and delivery is possible for an additional charge (1500,-€) For sale there are other mezzanines with the following dimensions: - Dimensions : 4.95 x 2.50 m - 715€ plus VAT - Dimensions: 5.50 x 2.65 m - 715 cm More items new and used - you can find in our shop! International shipping costs on request!

Floor-standing distributor, computer terminal, PC cabinet, server cabinet TRITON RMA-18-A88–CAX–A1 800 x 800 x 1040 mm Door: 800 x 800 mm ( with safety glass window 470 x 780 mm ) 2x side panel: 650 x 610 mm rear panel: 800 x 800 mm Welded floor distributor with removable side and rear panels used, tested ! Dimensions: 820 x 800 x 1040 mm

Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Type EP5 150 V5 Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 ...

Standing microscope PEAK 2034-100 PS No.84 magnification: 100x field of view: Ø 1.45 mm scale graduation: 0.01 mm working distance: 5.7 mm measuring length: 1.2 mm Ø 63 x 172 mm without light ! with suitcase 210 x 155 x 75 mm

Floor scale with industrial PC, hand-held scanner and hydraulic lifting device SARTORIUS Midrics 2 MW2P4-1500II-L 26602055 Load capacity: 1500 kg readability: 0,0,1 kg Weighing surface: 800 x 800 x 370 mm Industrial PC: 5AP920.1505-K80 Automation Panel 900 Screen diagonal: 15 used, checked ! Dimensions: 1500 x 1300 x 2500 mm

Writing desk, rolling desk, floor trolley, logistics trolley, shelf trolley Transport trolley, platform trolley, workshop trolley FETRA Type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 Load capacity per shelf: 50 kg Total load capacity: 100 kg Roller pult made of tubular steel and profile steel screw construction, powder-coated, blue RAL 5007 - Writing surface on wooden board with stop strip, approx. 10 inclined - 2 shelves, variably screwed in (2 folder heights possible)- 4 pieces of swivel-fixed castors (125 mm) with plastic rim and rubber coating on the tread - 2 pieces fixed castors with brakes Space requirements L x W x H: 600 x 600 x 1190 mm Net weight: 25 kg very good, as good as new condition; used

Bunk shop oven / bakery oven Wachtel Piccolo 1-5? Product? Manufacturer: Wachtel? Type: Piccolo 1? Year of manufacture: 03/2013? Condition: used, baker's condition - please clean thoroughly before use? per shelf 1x 60x80 cm sheet metal or 2x 60x40 cm trays? with proofer? Control: DMS 3 Master EM? Electric. Connected load: 25.1 kW? Voltage: 400 V AC/3Ph/N/PE/50 Hz? Floors Dimensions: W.: approx. 80 cm, D.: 66 cm? 1. Floors Height: 20 cm? 2nd - 5th floors Height: 14 cm? Outside Dimensions: W.: 116 cm, D.: approx. 115 cm, H.: 237 cm (with hood)See pictures for details. 

Quail Piccolo 1-5 Floor Store Oven Baker / Bakery? Product? Manufacturer: Wachtel? Type: Piccolo 1-5? Year of manufacture: 08/2011? Condition: used, baker's condition - please clean thoroughly before use? per shelf 1x 60x80 cm sheet metal or 2x 60x40 cm trays? with proofer? Control: DMS 3 Master EM Timer? Electric. Connected load: 26.5 kW? Voltage: 400 V AC/3Ph/N/PE/50 Hz? Floors Dimensions: W.: 60 cm, D.: 85 cm? 1st floor height: 20 cm? 2nd - 5th floors Height: 14 cm? Outside Dimensions: W.: 97 cm, D.: 132 cm, H.: 236 cm (with hood)

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: 5 floors -Roll width: 300 mm -Rollers: Ø 50 mm -Roll distance: 150 mm -Distance between floors: 700 mm -Dimensions: 650/400 / H3010 mm -Weight: 72 kg

Brush segment Quick Snap, brush, plastic brush, nylon brush, floor pads -Manufacturer: Tennant, Floor Pads 16 406 mm unused Ovp -Type: M32 Black -2 carton: content 5 pads per carton -Price: complete -Weight: 3.2 kg

Brush segment Quick Snap, brush, plastic brush, nylon brush, floor pads -Manufacturer: Tennant, Floor Pads 17 432 mm unused Ovp -Type: M32 Black -Carton: content 5 pads -Price: complete -Weight: 1.9 kg

Floor cutters, asphalt cutters, concrete cutters -without: saw blade and cable -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Floor cutters, asphalt cutters, concrete cutters -Saw blade: Ø 350 mm -Cutting depth: 120 mm -Motor: Honda GX340 8.1 kW 11 HP -Number: 3x available -Price: per piece -Dimensions: 1250/500/H800 mm

Floor cutters, asphalt cutters, concrete cutters -Tank: defective -Saw blade: Ø 350 mm -Cutting depth: 120 mm -Motor: Honda G400 7.4 kW 10 HP -Dimensions: 1250/500/H800 mm

Floor saw -Motor: Honda petrol engine -Power: 8.1 kW/11 PS -Saw blade diameter: 400 mm -Number: 3 pieces available -Price: per piece

Floor saw, diesel floor saw, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E start -stepless feed

The scope of delivery includes: 01x Particleboard/ flooring for mezzanine floors, new Manufacturer: UNILIN Division Panels Year of construction: March 2023 (new) Dimensions: approx. 2,600 x 1,020 mm (WxD) Particleboard thickness: approx. 38 mm Design: P4, grooved all around Weight / piece: approx. 65.50 kg Panel size: approx. 2.65 m² Colour top: raw Colour underside: white Note: - The chipboard is as good as new. Due to the storage, dust deposits may be present. - The chipboard does not have a spring. These are picked separately. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Welding table 3000 x 1500 mm

Belt Grinding and Polishing Machine Löser SMG Specifications: • Power 2 x 4 kW • Speeds on both sides 3-stage 1400/1800/2200 rpm • Belt clamping arms for belt lengths up to 3,500 mm • Surface-mounted / free-standing extraction hoods for pane diameters 400 - 600 mm

Nilfisk BA551D Floor scrubber Walk behind scrubber dryer, perfect for floor cleaning,

surface area: 2,5 x 5 meter weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

Paint line for parquet working width 450 mm Varnishing machine 2 positions with dosing and application roller 2nd position with reverse station 3 x motor 0,25 kW, 1 x 0,37kW feed rate: 5 - 20 m/min 3 rubber application rollers 40? Shore available and 1 moose gummi roller Polishing conveyor Suitable for distribution of oil, stain, UV/LED products over the parquet board Conveyor belt: 6000 x 450 mm The machine is equipped with 1 pad unit and 3 brush units 1 x motor 0,75kW, 3 x motor 0,55 kW 4 brushes available Cleaning machine for 3 brushes

First machine, for longitudinal processing, TECNOLEGNO COMPACT 48/2, built in 1998 Working width min/max 90/300 mm. Single chain track Equipment: 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe Second machine for crosswise processing, MANEA MST-70, built in 1991 Working width min/max 220 / 2500 mm. Infeed chain with dogs hopper feed Equipment: 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor universally tiltable with pneumatically controlled pressure shoe 1+1 Milling motor un ...

Welding table 5 x 5 meter

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

Welding table 5 x 5 meter

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 2,5 x 5 meter weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams